www.thermaxindia.com Thermax Ltd Delhi, Patna : Nicmar Engineer Trainee

[Rajkumargautam]

Thermax Ltd Delhi, Jamnagar, Patna : JUNIOR ENGINEER / NICMAR TRAINEE

Designation: JUNIOR ENGINEER / NICMAR TRAINEE
Experience: 0 - 1 Years
Location: Delhi, Jamnagar, Patna

Job Description:
MECHANICAL ENGINEER WITH NICAMAR DEGREE FOR CONSTRUCTION JOB AT SITE

Desired Candidate Profile:
SHOULD BE A MECHANICAL ENGINEER WITH NICMAR DEGREE IN CONSTRUCTION MANAGEMENT

Company Profile:
Thermax is a global solution provider in energy and environment engineering. It offers products and services in heating, cooling, waste heat recovery, captive power, water treatment and recycling, waste management and performance chemicals.

Thermax brings its rich experience gained from customer engagements around the world. Through technology partnerships and strategic alliances, it provides superior value to help industry perform efficiently and profitably. With a dedicated sales & service network spread over South East Asia, Middle East, Africa, Russia, India, UK and the US, Thermax ensures innovative solutions and reliable support for client's business improvement

Address:
Thermax Ltd
GREEN HOUSE 148, MUMBAI PUNE ROAD PIMPRI
PUNE,Maharashtra,India 410401

Email Address: jsaldhana@thermaxindia.com , tecc@thermaxindia.com
Website: http://www.thermaxindia.com

Keywords: NICMAR TRAINEE

[Vipul thakre]

Dear sir ,

myself vipul thakre. i complete dip. mechanical engg. with 72% . i am interest in cement plant. so i want a job in your reputed industry. please notify on my resume.

yours faithfully,

vipul thakre

[Guest]

ZULFEKAR ALAM
E-mail : za9778 AT gmail.com
Objective :
A dynamic team spirited and bottom line oriented, equivalent to degree in Engg. of 24 and 1/2 yrs of experience in Automobile and diesel generating set including installation, commissioning, testing, documentation, training of users, trouble shooting of problems and on hand servicing.
Educational Qualification : Passed Intermediate Exam ( Science / Math ) 1986.
Technical Qualification : Diploma in Mechanical Engg. (1992 )
: Degree in Engg. (2006)
Other Qualification : B.A (Osmania University, Hydrabad) (1994)
: Diploma in computer application (2009)
Training Undertaken :
1. Basic & On job Training. - 15 Months. – WTI & MTI, AF Chennai - 1986 & 1987.
2. Conversion Course. - 12 Months. – MTTI, AF Chennai. - 1992.
3. Quality Assurance Course. - 03 Months. - CTI, AF Bangalore. - 1994.
4. JWO management Course. - 01 Months. – AF STN, Jamnagar. - 2001.
5. Diesel Genset Course. - 03 Months. - CTI, AF Bangalore. - 2004.
Professional Experience :
1. Served Indian Air Force from Dec 86 to Nov 06 at different location as service Engineer & various other capacity.
2. Presently working with Ircon International Limited as Site Engineer (Mechanical) at J&K Rail Project.
Job Experience : (Past)
1. On Hand experience on maintenance, Servicing & overhauling of Engines of Tata , Ashok Leyland, DG Set(Cummins, KOEL, Ruston, Greaves Cotton, HA Series of engines.)
2. On Hand experience on maintenance, Servicing & overhauling of Motor Vehicles, various types of Hydraulic Crane, Fork Lifter, Russian Vehicles & Equipment.
3. On Hand experience on Crankshaft / Camshaft inspection.
4. In charge of fuel Calibration Laboratory of Fuel Injection Pump, Injector / Cummins Injector, PT Pump & Wood Ward Hydraulic Governors.
5. In charges of Scheduled maintenance of DG Set / Break Down Team, Looking after complete Central India to North India Including Rajasthan.
6. Knowledge of various Fire Fighting Application, First Aid Procedure, Handing of Various Fire Arms & Ammunition & Security Management.
7. An NCC Instructor, induced self - Discipline, Motivated Young Generation at Udaipur (RAJ)
Job Experience : (Current)
1. In charge of maintenance, Servicing & overhauling of JCB Loader / Backhoe, Excavator , Motor Grader , Dozer ,Tandem / Vibratory Roller & Pavers etc at Road Project.
2. In charge Batching Plant , Hot- Mix Plant at road Project.
3. In charge of Stone Crusher Plant and heavy Earth Moving Machineries At Rail Project.
Administrative :
1. An Snco’s, In charge of ISO-9001 approved Mechanical Laboratory / Workshop at Delhi.
2. In charge of Power house Utilized for Constant Feeding of Electric Supply to Electronic Eqpt.
3. Logistic Management of Spares / Equipment & inventory control at Technical Store.
3. Quality of Public Speaking/Dealing & Liaison Skill to Private/Central/State Gov.Org.

[Guest]

RESUME
PANKAJ P.SONUNE
E-mail id. : pank.sonune AT gmail.com

CAREER OBJECTIVE
To explore a system which can make use of my knowledge and talent where I can built my career and establish myself as professional person not only in society but also in the organization.
ACADEMIC PROFILE
Educational Credentials
I have completed B.E.in MECHANICAL ENGG. from SSGMCE, Shegaon affiliated to Sant Gadge Baba Amravati University.
Exam Passed Board/University Year % Marks
8th SEM Sant GadgeBaba Amravati Summer 2011 76.29%
7th SEM Sant GadgeBaba Amravati Winter 2010 76.00%
6th SEM Sant GadgeBaba Amravati Summer 2010 71.87%
5th SEM Sant GadgeBaba Amravati Winter 2009 74.48%
4th SEM Sant GadgeBaba Amravati Summer 2009 73.7%
3rd SEM Sant GadgeBaba Amravati Winter 2008 65.76%
2nd SEM Sant GadgeBaba Amravati Summer 2008 77.83%
1st SEM Sant GadgeBaba Amravati Winter 2007 80.33%
H.S.C. 12th AMRAVATI BOARD March 2007 83.83%
S.S.C. 10th AMRAVATI BOARD March 2005 82.67%
SUBJECT OF INTEREST
- AUTOMOBILE ENGINEERING,THERMAL ENGINEERING.
PROJECTS UNDERTAKEN

- DESIGN AND FABRICATION OF PEDAL OPERATED FLOUR MILL
ACHIVEMENTS
I. The second prize in quize held by SAE.
II. Won first prize in interclass cricket matches.
III. University 3nd Topper in Summer-08 Examination.
IV. Awarded a Scholarship for Outstanding Performance during academic year-08&09.
Won 2nd prize in national level paper presentation competition in Pursuit 09.
EXTRA CURICULLAR ACTIVITIES
- Worked as a NSS Member.
- Coordinated Blood Donation Camp held in Feb 09 through NSS.
- Worked as active member of SAE.
HOBBIES
- Playing cricket
- Listening songs.
- Reading newspaper.

PERSONAL SKILLS
- Good team player.
- Team building capabilities.
- Quick learner.

[Guest]

CURRICULUM VITAE
Mayur R Zunjwadkar
E-Mail :mayur_june1985 AT rediffmail.com
OBJECTIVE :
I aspire to take a challenging position and be a part of efficient, winning team and serve in an organization, which offers challenging tasks and where constant up-gradation of knowledge is possible.
EDUCATIONAL QUALIFICATION :
Course Universities/Board Institution Years of passing Percent
%
B.E(MECH) V.T.U.Belgaum KLS’s VDRIT Haliyal June 2011 52.0%
(Agrt)
DIPLOMA
(MECH) Banglore GomteshPolytchnic
Belgaum June 2005 62.33%
S S L C K S E E Board Halashi High School Halashi March 2001 67.04%
WORK EXPERIENCE :
- Designing of piston remover, Notching m/c’s both hydraulic and pnuematic using Auto Cad at NMR Engineer’s Pune-41 (6 months).
- Designing of Crusher’s and Conveyor’s using Auto Cad at AGE’S Technologie’s Pune-41 (6 months).
- Manufacturing of Speed reduction Gear boxes using Lathe, Hobing m/c, Shaping m/c, Worm gear m/c at Gateej Engineerig Co. Pune-41 (6 months)
COMPUTER SKILLS :
- Pro-Engineering Wildfire. (Model CAM Infotech sadashiv peth pune-41)
- Ansy’s (Model CAM Infotech sadashiv peth pune-41)
- Auto CAD. (Passar Pawn Technologies pune-41)
- Inventor. (Passar Pawn Technologies pune-41)
- Solid edge, Caps mill, Caps turn.
PERSONAL SKILLS :
- Sincerity, hard work and self confidence
- Well-organized, and strong work ethics
- Ability to blend into a team, lead and excel in individual capacity.
- Intrinsic creative talent, assiduous and self motivated.
- Good Communication & convincing skills.
AREA OF INTEREST :
- Power saving & generation.
- Alternative energy sources.
- Manufacturing and Assembly.
- Quality and Inspection.
- Maintenance of Machines.
ACADEMIC PROJCT :
1. PROJET : “Portable Drilling Machine” (Mannual)
OBJECTIVE : In order to reduce the human effort using suitable gear linkage and flywheel mechanism.
2. PROJECT : “Braking Force Energy Recovery System For an Automobile”
OBJECTIVE :
- To design and fabricate energy recovery mechanism.
- To design and Fabricate Helical Spring in order to provide initial torque.
HOBBIES :
- Reading novels, fond of music.
- Walking for a long, Trecking.
- Sitting alone at a peaceful place.
- Photography.
- Travelling.
E-Mail Mayur_june1985 AT rediffmail.com
DECLARATION :
I am Mayur R Zunjwadkar do hereby declare that, what is stated above is true to the best of my knowledge and belief.
Signature

[Guest]

Mrinal Singh
E-mail mrinalsingh57 AT gmail.com
Career Objective
I wish to work in an organization, which recognizes my individual & teamwork qualities. It is my drive to prove myself to be an asset to the organization I associate with, yet expect the organization to be an asset to my professional development. I expect to work in & create an environment that acts as a catalyst to bring out the best of my analytical & leadership capacities, is mentally stimulating, packed with commensurate challenges & rewards.
Work Experience
Panduranga Timblo groups Goa (Codli Mines)
Company profile :
Panduranga Timblo Group is one of Goa's pioneering groups started by late Panduranga Timblo, an entrepreneur and a visionary. This group has interests in mining and exports of iron ore, shipping, shipbuilding, engineering, marketing, land cultivation and production.
- Work Experienced – 7/4/2010 – 12/10/2010
- Responsible for handling Beneficiation plant, Crusher plant, Magnetic separator plant
- Maintenance of heavy duty process equipments like Ball Mill, Vacuum Pumps, Filters, Thickeners including Slurry Pumps.
- Maintenance of Wheel Loaders, D.G sets.
- Responsible for Inventory control, arranging ratable spares for immediate replacement to avoid down time of equipment. Imparting training to Mechanics and giving awareness towards safe operating practices. I am well conversant with Electronic diagnostic trouble shooting procedure.

Ms. Deccan’s Minerals Pvt. Ltd
Company profile :
Ms Deccan minerals Pvt. Ltd. is involved in iron-ore production and mining activities. This division has been operational in the iron rich mines on the Maharashtra – Goa border to extract the finest grade of iron-ore since 2005.
It is a business initiative that has proven to be a feather in our cap. Since inception, their mining activity has been growing
The quality of Iron ore has always been of top priority, keeping in mind clients' preferences and requirements. The quality standards of the product and distribution have always been as per expectations.
- Work Experienced – 12/10/2010 – 14/07/2011
- Responsible for handling Ripper Dozers L&T D275A-5 and D275A-5R , L&T PC 200 Excavators.
- Maintenance of Wheel Loaders, D.G sets, Monobolic pumps, Tata dumpers
- Responsible for Inventory control, arranging ratable spares for immediate replacement to avoid down time of equipment. Imparting training to Mechanics and giving awareness towards safe operating practices. I am well conversant with Electronic diagnostic trouble shooting procedure.
Projects & training
- Six weeks of industrial training from Bokaro Steel Plant Jharkhand.
- Major project on Omni directional vehicle
- Minor project on gas engine power plant (MCPL Gwalior)
- Seminar on Omni directional Robot
Project Report : OMNI DIRECTIONAL VEHICLE: In this project vehicle moves in all the direction. The concept of having a mobile platform which is capable of movement in any direction without actually turning at any stage has appealing at the first instance
Requirements : DC motors, electronics parts, rollers pins

Project Report : STUDY OF GAS ENGINE POWER PLANT
(MALANPUR CAPTIVE POWER PLANT GWALIOR);: In this study we go through the working process of gas engine power plant and basic accessories needed to support the plant and about the consumer and from where the plant gets its inputs

[CHIRAG PADHIYAR]

MY EDUCATION:
S.S.C: 86.15% IN MARCH 2007 FROM G.S.E.B
I HAVE COMPLETED DIPLOMA IN MECHANICAL ENGG WITH 56.75% IN APRIL 2011 FROM M.S.U (POLYTECHNIC), VADODARA.

[Guest]

CURRICULUM VITAE
Kumud Ranjan
email :kumud801 AT rediffmail.com

Objective :
I am driven in my entire endeavor by a commitment to excellence. I have the attitude to learn and work in teams. Facing challenges and meeting deadlines are my strengths. Looking forward to work in creative, challenging and learning atmosphere, which provides ample opportunities.
Snap Shot :-Work EX:
Above 5 years of Experience on Project, Operation and Maintenance of Telecom Network
- Working as an Cluster Incharge with Champion Group of Company(Authorised Vendor Of Vodafone) Bihar since 05th Feb 2009 to till Date. Handling all responsibilities for O&M and all technical work of Madhubani & Darbhanga cluster (350 sites). ..
- Working as an structural engineer in SNC Power Corporation Pvt. Ltd. Karnataka from 17th august 2006 to Jan 2009,taking all responsibilities for power house, mill & bunker,pipe rack for the Bellary thermal power project(1x500 MW)
- Completed B.E in Mechanical from Nagpur University in 2006 from wardha(M.H)
Work Portfolio :- at Champion Group Of Company
- Corrective and Preventive maintenance of the Utilities equipment in the
Various facilities assigned against the respective geography, as per processes defined in procedures.
- Ensure installation of all energy improvement utility equipments such as fan filters, Fuel optimizers, Fitch catalyst etc & monitor the energy improvements as per the plan.
- Review of all power & fuel bills, site wise analysis, and corrective actions.
- Project activities – up gradations of equipments as per business needs.
- Installation & commissioning of Battery. Bank, power plant & PIU.
- Corrective & preventive maintenance of DG, SMPS, Battery. Bank, PIU.
- Liaises with customer care team & sales team regarding network outages.
- Responding various alarms regarding SMPS, DG and taking action against the alarms with my technical team.
Work Portfolio : SNC POWER CORPORATION PVT LTD
- Fabrication& erection, alignment & handling over the structures.
- Fabrication & erection of station building & mill bunker.
- Station building main columns, auxiliary columns, main beams, secondary Beams, Crane Girder beams, Horizontal& vertical bracing, Trusses.Purlins, staircase
- Mill bunker columns, main beams, inter connected beams, shell, conveyors
- Checking the alignment & verticality of columns by plumb
- . Thorough Knowledge in studying the drawings & derive the BOQ’s
- . Referring the IS Codes related to structural steel fabrication and erection
- Cutting plans, minimizing the wastages.
- Inspection of fit up & weld visuals
- Offer for inspection & obtaining clearances
- Identification technical deviations to clients & obtaining clearances
- Addressing technical deviations to clients & obtaining clearances.
- Safe Rigging & erection practices
- As built drawings preparation
- . Accounting of materials & reconciliation of materials
- Preparation & certification of measurements to Sub contractors
- Submission & getting certification of measurements from Clients with reference to Billing Schedule.
It Skills :
- OS : MS-Dos, MS-Windows 98/XP,MS-Office,MS-Excel
- Software :AutoCAD
Project Profile :
Project # 1 :
`
Arm actuated propulsion system in wheel chair cum stretcher
Role : DESIGNING
Team Size : Four
Duration : 4 months
Description : By using four bar mechanism in wheel chair cum stretcher it is made self actuated and it is possible for the person to drive and control the wheel chair himself without any help.
Merits : Low cost of modern modified wheel chair cum stretcher in market.
Easy to handle and control by the patient.
Trainings :
- One month Industrial Training at B.H.E.L (Haridwar uttaranchal) ainings :
Ts :
: Academics Background:
- B.E. in Mechanical engineering
- Institution : Bapurao Deshmukh College of Engineering Sewagram (wardha)
- University : Nagpur (maharastra)2006
- +2 from A.N.college patna
- 10th standard from jawahar navodaya vidyalaya katihar

[Guest]

AVISHEK AVINASH



JOB TITLE : SERVICE ENGINEER
(Manufacture of Road Construction Machines)
Objective : Seeking a challenging career and long- term association with the professional organization for proper exposure in Mechanical field and to be a part of vibrant & dynamic industry where in my strong and technical exposure .,That will bring out the best of my abilities.
WORK EXPERIENCE :
1. . Company name ; delco infrastructure project limited

Position ; Mechanical incharge
Duration ; 22 june 2011 to till date
Nature of work ; service/maintenance
Job profile ; soil compactor,tendem roller,backhoe loader.hydra,hot mix
Plant,diesel road roller,bitumen pressure distributed,hywa
DG-62 K.V,etc,
2. Company name ; k.s.softnet solutions pvt ltd
joint venture with nagarjuna construction company.
(Which is maker of national or international checkpost).
Position ; Maintenance manager

Duration ; Aug 2010 to till date
Nature of work ; service/maintenance
Job profile ; soil compactor,tendem roller,backhoe loader.hydra,hot mix
Plant,diesel road roller,bitumen pressure distributed etc….

3. Company : Speed Crafts Ltd., Patna
Position : Service Engineer(Section incharge)
Duration : Jan 2008 to July 2010
Nature of work : Maintenance,service, trial, testing, dispatch
Job Profile : Diesel Road Roller, Hot Mix Plant, Drum Mix Plant Paver
Finisher, Mechanical Broom, Bitumen Pressure Distributed,
Pot Hole Repairing Machine, Cheep Spreader Aggregate crusher, concrete mixer, mini dumper, wet Mix macadam etc.
4. Company : Speed Crafts Ltd., Patna
Position : Production Engineer.
Duration : May 2007 to Dec 2007
Nature of work : Fabrication, Mislenious
Job Profile : Manufacture of Road Construction Machine equipment
(Drum Mix Plant) like as Fourbin, Dryer, Multicyclone, Venturymeter, Bitumen Tank, L.D.O. Tank, Cold Convayer, Hot Convayer, Control Cabin Aggregate crusher, concrete mixer, mini dumper, wet Mix macadam etc.
VOCATIONAL TRAINING
Organization Duration Particulars
Bokaro Steel Plant Bokaro (Sail)
Four Week
R.M.H.P., B.F., HRM, S.H.M.-Ist, S.H.M.-IInd, C.R.O., Workshop structural Shop
PROFESSIONAL QUALIFICATION :
- B.E. in Mechanical Engineering with 65 % from Magadha University.
ACADEMIC QUALIFICATION
- Intermediate from BIEC, Patna with 69 %
- Matriculation from B.S.E.B., Patna with 61%
CERTIFICATIONS :
- Diploma in Computer Applications
I hereby, declare that the information furnished above, is true to the best of my knowledge and I look forward to hearing from you.

[shivdayal]

sir
i have done my btech as a mechanical engineering from hntu Hyderabad,i have 1 year experience in my field,sir i have done piping engineering asme b31.3.ndt asnt level 2(ut,rt,mt,pt)and quality control and engineering inspection.
Sir here i give u detail so please as soon as possible give response to me.
Thank you
shiv dayal

[Guest]

Sir i am bagavath singh.c . I complete in B.E mechanical engineering.two year experience in fabrication field

[Guest]

dear sir ,
here is my resume attached please find and check.
sir i am a B.E mechanical having a good knowledge of auto-cad an presently working with a manufacturing company in Ahmadabad which deals with the manufacturing of material handling systems and equipments.
thanking you
regard
hemant sutar