www.lpcpl.com LAUNCHPAD CONSULTANCY SERVICES PVT LTD Vadodara : Piping Design Engineer

[mskavi]

LAUNCHPAD CONSULTANCY SERVICES PVT LTD Vadodara/Baroda : Piping Engineer
Website: http://www.lpcpl.com

Keywords: design, piping, design engineer, piping engineer, piping design engineer
Designation: Piping Engineer
Experience: 5 - 7 Years
Location: Vadodara/Baroda
Compensation:
Best in Industry
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Chemicals/ PetroChemical/Plastic/Rubber
Functional Area: Engineering Design, R&D
Posted Date: 06 Jul 2009

Job Description:
piping designing of chemical process plant.

Desired Candidate Profile:
BE (Mech) with 5-7 yrs exp in piping design of chemical process plant, familiar with the use of software used for piping design sucha as PDS ,PDMS ,Stress Analysis, 3D Modelling,Caesar-II,MTO, ANSI,ASME code,Plant Layout, GA Drawings, Isometrics etc.

Company Profile:
We are Job Placement Consultancy providing Manpower as per Requirement of Client Company.

Executive Name: Mrs. Kinjal Shah

Address:
Launchpad Consultancy Services Pvt Ltd
501 Opal Square BH Express Hotel RC Dutt Road,
Alkapuri
VADODARA,Gujarat,India 390007

Email Address: kinjal@lpcpl.com

Telephone: 91-265-2321843

Reference ID:
lp/ap/pe

Keywords: design, piping, design engineer, piping engineer, piping design engineer

[Guest-IJT]

Name : k.sivachandran
Email : k.sivachandran85 AT gmail.com
Designation / Skillset : pdms designer/piping designer/pdms,autocad,microstation,pds
i apply for pdms desginer.

Resume :
Objective
Intend to build a career with a leading corporate of hi-tech environment where there will be opportunities to demonstrate my skills and knowledge in order to pursue a long-term relationship with the organization.
Academic Qualification
Bachelor of Engineering in Mechanical Engineering, Annamalai University, 2008 with 62%.
HSC in N.L.C Higher Secondary School under State board with 64%.
SSLC in N.L.C Higher Secondary School under State board with 60%.
Work Experience
Worked as a PIPING DESGINER in MECH CI CADD , Chennai from AUGUST 2010 to TILL Date .
Undergone Graduate Apprenticeship Training in BHEL-PIPING CENTRE, CHENNAI from AUGUST 2009 to AUGUST 2010 Placed as a Pdms Trainee .
Worked as a in Heat Ventilation Air - Conditioning , Chennai from June 2007 to Aug 2009. Involved as Erection ( chilled water pipe lines )
Key Competencies
PDMS , PDS
3D Pipeline routing & Equipment modeling using Design module.
Piping isometric using Spooler & Isodraft module.
GA / Layout Drawing using Auto draft module.
Backing sheet creation using Draft module.
Creation of Piping Catalogues & Specification using Paragon & Specon module..
Setting up a New Project & Creating the main ADMIN Elements.
PIPING ENGINEERING
Pipe Sizing & Material Selection.
Exposure to ASME B31.1 codes.
Preparation of Isometric drawing for Fabrication & Erection.
Conversion of Layout drawing to Isometric drawing.
Exposure to Stress Analysis (CAESAR II 5.20).
Computer Proficiency

PDMS 11.5 & 12 SP 5.0 , PDS
Caesar II 5.20
Micro Station
AutoCAD-2008
PROJECT : CREATING AND MODIFIED.
CLIENT : BASF PRODUCTS PLC BRADFORD & GRIMSBY.
Software Used : AUTO CAD-2007
Modified BS1553 PT 1 1977 Standard to ISO 10628
PROJECT : PIPING, DUCTING UNIT & PIPERACK .
CLIENT : TAIKISHA ENGG PVT LID.
Software Used : PDS & MICROSTATION
Involved in 3D Modeling Overall the Plant.
Involved in 3D Pipeline routing and Ductlines.
Projects Involved In BHEL
PROJECT : BONGAIGON THERMAL POWER PROJECT (3X250 MW)
CUSTOMER : NATIONAL THERMAL POWER CORPORATION LIMITED.
Software Used : PDMS
Involved in 3D Pipeline routing using Design Module.
Generated detail drawing.
Created Piping Catalogue with Isometric drawing.
Done Piping stress analysis.
PROJECT : BINA THERMAL POWER STATION (2X250 MW)
CUSTOMER : BINA POWER SUPPLY CO. LTD.
Software Used : PDMS.
Involved in 3D Pipeline routing of Critical Piping using Design Module.
Generated detail drawing.
Supported the overall day-to-day PDMS piping operations in BHEL, PC by maintaining the databases and resolving design issues among the users.

Reference

Mr.C.Vaithianathan,
DGM/Engineering (PDMS-DEVELOPMENT)
Piping Centre / BHEL, Chennai-18.

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4225642
Date & Time : 8th Jun 2011 4:51 AM (UTC)
IP Address : 122.174.17.159
Browser Info : Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.77 Safari/534.24
Predicted Country : India

[Guest]

Krutarth Purohit
Email : er.aangirush AT yahoo.com
ASPIRING ENGINEER :-
Looking for a challenging and satisfying opportunity in the industry which is more aligned with my academic background and which efficiently utilizes my analytical and technical skills.
EDUCATION QUALIFICATION :-
2008 – 2010 Msc.’ Marine and Offshore Engineering’
Liverpool John Moors University.
Modules included Marine Design Engineering, Maritime and Offshore Safety Analysis, Offshore Engineering, Offshore Structural Analysis Business, Finance & Management in Maritime Operations, Quality System and Six Sigma.
Project : - Pressurised vessel and Boiler. (Designed and Analyzed)
2007 – 2008 IELTS : International English Language Testing System.
2002 – 2006 BE Marine Engineering (First Class) Institution of Mechanical Engineers (India).
Modules included Engineering Economics and Analysis, Aerodynamics, Maintenance of Air fame and System, and Marine Engineering.
Project : - A project on Study of Internal Combustion Engine.
2002 – 2004 Higher secondary (12th, Level A) Gujarat Board (Gujarat Higher Secondary Education Board).
2000 – 2002 Secondary (10th, GCSC) Gujarat Board (Gujarat Higher Secondary Education Board).
Practical Training : - (During First Degree)
Successfully completed training for Milling, Grinding and Lathe machine at Indo German Tool Room, Indore for a month.
Technical skills : - (IT and Engineering)
Excellent working knowledge of Piping and Instrumentation diagram (P&ID), Solid Works with Cosmos and Finite Elements, Fault Tree Analysis, SPSS, Quality Control, Internet Application, MS-Office.
Communication :-
- Working with colleges/students in effective manner.
- Liaising with people in other languages.
- Fluent in English, Gujarati and Hindi.
Teamwork :-
- Worked in a small team on group assessments and assignment.
- Built team spirit in university during group assignment.
- Planning and coordination role taken in university group assignments- achieved an overall average 70% grade in-group assessments.
Initiative and working under pressure :-
- Enjoying working under pressure.
- Quickly can interactive with colleges
Additional information :-
Hobbies :- Reading latest technology journals, Biography, Playing Snooker, Listening music, collect Movies and Music.
Interest :- Excellently play Tabala.

[Guest]

SAMIR CHAUDHARI

Email : sam.cad.mech AT gmail.com
STRUCTURAL/PIPING DESIGNER
Total 6+ years Experience
EDUCATION QUALIFICATIONS
Academic Details Institute
Pursuing Graduate in Mechanical Engineering
(Associate Membership)
(AMIME)
Institute of Mechanical Engineering Mumbai, India
Technician Engineer
Institute of Mechanical Engineering Mumbai, India
2011
Diploma in Mechanical Engineering T.E.B Gujarat, India 2004
Certification
Institute
AUTOCAD
CAD HOUSE Surat-Gujarat, India
Solid edge
CAD HOUSE Surat-Gujarat, India
Piping Design & Engineering With PDMS Maharashtra institute of Technology Pune, India
SUMMARY OF EXPERIENCE
- Preparation of MTO & Estimating the Material Required as per the BID Document.
- Identify Engineering Deliverables Related to structural work, review and ensure completeness.
- To control the Drafting team,
- Checking/preparation of Fabrication Drawings.
- Site checking and correspondence with sub-contractor.
- Preparing 2D drafting & 3D modeling of piping system.
- Preparing 2D drafting & 3D modeling of structure & Equipment as per requirement
- Support to other departments like Production, Planning, Purchase and other design groups.
PERSONAL PROFILE
- Presently working with
Larsen & Toubro LTD / LLC
- Modular Fabrication Yard, Sohar, Sultanate of Oman
Since August ‘2011
- Shipbuilding Division, (Hazira) Surat, India
June ‘2010 – July ‘2011
- Modular Fabrication Yard, Sohar, Sultanate of Oman
February ‘2008 - February ‘2010
- Heavy Engineering Divison, Hazira, Surat, India
September’2005 – December’2008
- CAD HOUSE, F-7, Jolly Complex, Ghod-Road, Surat, Gujarat-India
April’2005 – August ‘2005
SOFTWARE SKILL
CAD Software
- AutoCAD
- PDMS 11.6, 12sp6 (MIT, PUNE)
- Microstation V8i
- Solid edge
- Autospool
Packages
- MS-Office
PROFESSIONAL EXPERIENCE
Larsen & Toubro Modular Fabrication Yard, Sohar, Since August ‘2011
Sultanate of Oman (Middle East)
Structure /Piping Designer
Company Profile,
Detail-Engineering & Fabrication of Offshore modules like Offshore Rig (Hull steel structure, leg & spud can structure) Jacket, Deck, Bridge, Flare & General Engineering Products for Chemical Plants.
Projects : MAYOR LAYUP REPAIR FOR RIG SAGAR UDAY
Client : ONGC,India
CAD Environment : PDMS 12.6, AutoCAD, Autospool.
- To control the Drafting team,
- Checking Piping Isometrics against PDMS Models
- Checking / Preparation of fabrication drawing of structural drawing for the production.
- Preparing 2D drafting & 3D modeling of structure & Equipment as per requirement.
- Preparing 2D drafting & 3D modeling of piping system.(PDMS)
- Preparation of fabrication drawing of the piping system for production in Autospool.
- Structural & Piping site survey & Inspection.
Larsen & Toubro LTD. Shipbuilding Division, (Hazira) Surat, June ‘2010 – July ‘2011
Piping Designer
Projects : Piping Design of Multipurpose Heavy Lift Cargo Vessel.
Client : BIGLIFT, Switzerland
CAD Environment : Microstation V8i, AutoCAD
- Preparing 2D drafting & 3D modeling of piping system
- Preparation of detailed fabrication drawing for the production.
- Study the client drawings, consultant drawings & sub contractor drawings to prepare the detailed MTO (Material Take Off).
- Extraction of drawings/BOM as may be required.
- Estimation of BOM for systems based on client drawings & Technical specifications.
- Support to other departments like Production, Planning, Purchase and other design groups.
Larsen & Toubro Modular Fabrication Yard, Sohar, February ‘2008 - February 2010
Sultanate of Oman (Middle East)
Structure Designer
Company Profile,
Detail-Engineering & Fabrication of Offshore structural modules like Offshore Rig (Hull steel structure, leg & spud can structure) Jacket, Deck, Bridge, Flare & General Engineering Products for Chemical Plants.
Projects :
MOQ Project, (Jacket, Bridge, Deck and Piles.)
Client : Mearsk Oil Qatar. Offshore structure
FD VII (Foresight Drilling VII) Oil Rig, (Hull repair, Spud Leg, Spud Tank),
Client : Lynemouth Drilling SA.
- Study the client drawings, consultant drawings & sub contractor drawings to prepare the detailed MTO (Material Take Off) and calculate weight of the structure
- Structural site survey & Inspection.
- Preparing 2D drafting & 3D modeling of HULL Structure.
- Preparation of detailed fabrication drawing for the production.
- Preparation of final as built drawings, based on the changes made during fabrication.
- Knowledge of EPC design workflow.
Larsen & Toubro Ltd. (HED) Hazira, Surat, India, September’2005 – January’2008
CAD Engineer
Projects : HPCL Rector I & II
Client : HPCL (Hindustan Petroleum Corporation Limited)
- Creating 3D Modeling (on SOLID EDGE software).
- Preparation of fabrication drawings on the basis of customer specification.
- General arrangement drawings (GA) preparation & other detail drawings.
- Define orientation plan for nozzle and other attachment to vessel shell.
- Fabrication drawing for the production Preparation of detailed
- Documentation – As per ISO and departmental requirements.
CAD HOUSE, F-7, Jolly Complex, Ghod-Dod Road, Surat, Gujarat-India. April’2005 – August ‘2005
Job Profile
- Study the client drawings, consultant drawings & sub contractor drawings to prepare 3D Models on Solid edge software, like oil field equipment.
- Creating 3D Modeling (On Solid edge software) for checking of parts (Especially nozzles & other attachment with joints) & hence to decide orientation plan
- Preparing 3D models for Medical Equipment.
- Preparing 3D models of Mould and die for Medical Equipment.
Interests and Hobbies : Playing Cricket, reading, travelling,
Expected Salary : Negotiable
Samir D. Chaudhari

[Guest]

mail id is wrong mail not delivering