www.strategiautomation.com Strategi Automation Solutions Pvt Ltd Chennai, Coimbatore, Delhi : PLC, SCADA, Automation Application Engineer

[mskavi]

Strategi Automation Solutions Pvt. Ltd. Chennai, Coimbatore, Delhi : Application Engineer
Website: http://www.strategiautomation.com

Keywords: PLC, SCADA, Automation

Designation: Application Engineer
Experience: 1 - 3 Years
Location: Chennai, Coimbatore, Delhi
Compensation:
Rupees 50,000 - 2,75,000
Education:
UG - B.Tech/B.E. - Electrical, Electronics/Telecomunication, Instrumentation, Mechanical,Diploma - Any Specialization
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Industrial Products/Heavy Machinery
Functional Area: Engineering Design, R&D
Posted Date: 06 Jul 2009

Job Description:
Installation & commissioning
Factory acceptance test
Research & development of application projects

Desired Candidate Profile:
Execution of onsite projects
Responsible for collection of scope of project before project execution
Responsible for giving support to sales team on technical queries.

Company Profile:
We are specialists in the field of Motion Control. We provide complete solutions in Factory Automation. We are the All India Distributors of some of the best names in the world for motion control products and accessories.

Executive Name: Ms. Charu

Address:
Not Mentioned

Email Address: sharath@strategiautomation.com

Telephone: 32467879

Reference ID:
App_06.07.09

Keywords: PLC, SCADA, Automation

[ARJUN MARIMUTHU]

ARJUN MARIMUTHU

Tel : 0431-2459077 Mob: +919840484418 Email: arjunmarimuthu AT gmail.com


OBJECTIVE

My core strengths are, effectively utilize academic training, analytical skills and technical knowledge to achieve organizational goals & objectives.

QUALIFICATION

Degree : B.E. (Electronics & Control) with 63%
Sathyabama University, Chennai-600119, Tamilnadu, India
2009
Higher Secondary : 12th with 61%
St.Johns Academy, Chennai
2005
School :10th with 57%
La chatelaine Residential Junior College, Chennai-600087
2003


JOB PROFILE

Year of Joining : August, 2009

Company Name : SAR Energy Private Limited

Job Description :
- Working as a Quality and Testing Engineer
- Incoming materials inspection
- Stage wise and Final Inspection of the Generators
- Attending and finding solution for customer complaints
- Testing of Diesel Generators ( Control Panel)


INDUSTRIAL TRAINING

Siemens S7 200 & 300, Allen Bradley PLC’S & SCADA Training Programme
Conducted by MegaTech Systems Technology, Adyar, Chennai

Description :
- Successfully implemented the basics of the PLC’s (Data Types, Functions like – Timers, Counters, Comparators etc.)
- Hands on experience on SCADA (Alarms, Trends, Simple analog programs etc.)



PROJECT

Monitoring and control of water purification process for automation using SCADA was done in Madras Fertilizer Limited (MFL), Manali, Chennai

Description :

- Studied parameters that are used for waste water purification in MFL.
- Software used in the project Visual Basic.
- Microcontroller was used to monitor and control certain parameters including(PH, level, pressure, etc).
- Secured 94% in the project.

AREA OF INTEREST
Automation & Industrial Instrumentation

IT & AUTOMATION SKILLS
PLC SIEMENS S7 200 & 300
PACKAGE MS OFFICE
SCADA ALLEN BRADELY
LANGUAGE C, C++

PERSONAL DETAILS
Date of Birth :15th December 1987
Languages Known : English, Tamil and German (Level1)
Permanent Address : No.22, Sivan Street, 6th Cross, Sundarnagar, Trichy–620021


DECLARATION :

I hereby declare that all the details given above are true to the best of my knowledge and belief.
yours truly

(Arjun Marimuthu)

[Guest]

job vacancy for instrumentaton engineer

[Guest]

let me know the PLC job vacancies in cbe

[Guest]

Resumes
Praveen.R
e-mail :praveenaugust9 AT gmail.com

Objective :
To gain technical knowledge, contribute them towards the development of the organization and myself.
Educational profile :
Course Name of the institution Aggregate Year of passing
Secondary School leaving certificate Govt.Hr.sec School, yedakad 84.40% 2004
Higher Secondary course certificate Govt.Hr.sec School, yedakad 65.50% 2006
Bachelor of electrical and electronics engineering Rajalakshmi engineering college, Chennai
70.19%
2010
Co curricular activities :
- Underwent an industrial visit to neyveli and ennore power stations.
- Underwent an industrial visit to Kona elevators
Project : “Double Frequency Buck Converter” The increase of switching frequency can improve the dynamics of power converters, but the efficiency may be degraded. A double frequency (DF) buck converter is proposed to address this concern.
Advantages :
- Circulating current will be less.
- Settling time is in micro seconds.
Scope for future :
The basic dc-dc converters such as buck, boost, and buck-boost can be deduced from a switch-inductor three terminal network.
Extra curricular activities :
- Secured second place in running competition during my school days.
- Player in college and department cricket team.
- Player in department football team.
- Coordinator of hostel day function (happy days).
- Won first prize in caroms during my school days.
- Won two “man of the series” awards organized by the private groups in cricket.
Area of interest :
- Special electrical machines.
Personal skills :
- Good team member.
- Self confident.

[Guest]

RESUME
KARTHICK. K
M-Id : karthick1481 AT gmail.com
Strengths :
- Positive approach
- Determined and Dedicated
- Right in time
- Will to succeed

Objective :

Interested in a challenging career in the field of Electronics & Communication that provides exposure to new ideas and stimulates personal and professional growth along with the organization.
Qualification :
B.E(Electronics and Communication Engineering)
College : Sri Venkateswara Institute Of Science and Technology,Kolundhalur-631203
University : Anna University
Aggregate : 76.1%
Class :First
Year of Passing :2011
HSC
School : ST.Thomas Matriculation Higher Secondary School, Chennai-600068.
Board : State Board
Aggregate : 69.58%
Class :First
Year of Passing :2007
SSLC
School : ST.Thomas Matriculation Higher Secondary School, Chennai-600068
Board : Matriculation
Aggregate : 78.36%
Class :First
Year of Passing :2005
Area of Interest :
- Programmable Logic Controller(PLC) & SCADA
- Computer Hardware
- Digital Electronics
Training/Internship :
- Undergone INPLANT TRAINING in CHENNAI PORT TRUST (Communication & Signals Dept).
- Has undergone INDUSTRIAL VISIT in ALL INDIA RADIO (AIR), Pondicherry.
UG Summer Project Work :
Title Application and Implementation of CAN Bus Technology in Industrial Real-time data Communication Southern Railway, Chennai.
Certification
o CAE (Certified Automation Engineer)
Course Details
- PLC
- SIEMENS, AB, ABB, GE FANUC, OMRON, KEYENCE.
- SCADA
- Intellution FIX 32, Invensys Wonderware Intouch.
- SCADA Interfacing with PLC
- Pneumatics
- VFD
o Computer Hardware and Networking

Extra Curricular Activities
- Participated in Cricket Tournament
- Symposium Organizer

[Guest]

Curriculum Vitae
Sivakumar B
Background
I am Sivakumar B, a Graduate Engineer and specialized in Mechatronics from SRM UNIVERSITY .Expertise knowledge in Wide & proven exposure of various Domains like Industrial Automation, Industrial maintenance & related manufacturing processes with a touch of creative application.
Educational Qualifications
S.No Course Institute Duration CGPA/%
1 SSLC Thiyagaraja, Srivilliputhur 2003-04 88.40
2. HSS Thiyagaraja, Srivilliputhur 2005-06 74.25
3 B.TECH-Mechatronics Srm University, Chennai 2006-10 7.22
4 PGDIP-Industrial automation
System design Doeacc, Calicut 2011 Pursuing
Additional Certification Courses
- Elementary First Aid
- Personal Survival Techniques
- Fire Prevention & Fire Fighting
- Personal Safety& Social Responsibilities
Areas of interest
- Industrial Automation
- Hydraulics & pneumatics
- Industrial Maintenance
- Robotics
- Process Control
Software skills
- Operating Systems : Windows Xp/Vista/07
- Design & Simulation : NI Labview2010,CNC Programming, Logix Pro
- Mechanical Design Tool : AutoCad2010
- Ms Office : Ms Word, Ms Power point, Ms Excel
- PLC : AB(S500), ABB(AC500),SIEMENS(S7)
- PLC Software : Rs Logix500,CodesysV2.3,Simatic Step7
- SCADA : GE FANUC
- SCADA SOFTWARE :PROFICY IFIX5.0
- DCS : ABB
Industrial Training Experience
1
Thai Summit Neel Auto Pvt Ltd, Inc. THAILAND Hosur, India
Trainee Engineer (Jun2010-Feb2011)
Industrial Automation, Erection of Plc & Robots.
Role.
- Planning and Development of New Automation Project.
- Changing the Manual stations to automated assembly stations using
PLC & PAC.
- Erection of Plc & Robots, drives.
- Weekly Preventive maintenance planning, Attending the machines
Breakdowns, Breakdown analyzing.
- Participating in Brainstorming & New machines development reviews
- Coordinating the Departments/CFT for appropriate cost & Timely
Delivery of the products.
- Participating in knowledge sharing sessions & trainings.
- Updating the Kaizen every week
Industrial visits
1. Pricol limited ,Coimbatore -2nd Semester.
2. Integrated coach Factory, Chennai -3rd Semester.
3. Rajsriya Automotive Pvt ltd, Hosur -7th Semester.
Project details
Title
Design and Fabrication of BATCH PROCESS PAINT FILLING MACHINE using PLC
Description
A Machine consists of a Rotary table with 4 equal sections along its circumference. The First section accepts cans from the input conveyer while the last section places sealed cans full
Of paint onto the outgoing conveyer. A programmable controller is used to perform the controller function of the process. The machine is started by pressing start button and can
Be stopped at any time by pressing the stop button.
Learning’s
- Area analyzed
Conveyer, Rotary Table, Solenoid Valve, Rack& pinion movement ,Ac drive Motors
- Feedback System
Sensor signals, Weight Transducer, Led
- Control System
PLC Programming, Programmable logic controller kit, Wirings.
Miniproject Details
Title
WIRELESS CONTROL OF 12V DC MOTOR
Description
Done a mini project on Wireless control of a 12v Dc motor by a remote wireless module. It can control the motor by sending an IR ray in the straight line aligned with the Receiver module. The transmitter module is capable of producing a 38kHz frequency by a set of two 555 timers and the generated wave is propagated by an IR diode.
Learning’s
- Control Circuits
Transmitter circuit, Receiver circuit
- Components analyzed
Ic555, Ir diode, Ir receiver, Resistors, Capacitors, Potentiometer
- DFM, DFA, FMEA,PFMEA, Fail safe
Paper Presentation
Title
BOMB DETECTING AND DIFFUSING VEHICLE ROBOT
Description
A robot is to be designed which can detect a bomb and diffuses it, using a heavy metal detector Sensor. The robot would be operated by a user using a radio range-remote control from a secure location. A provision of wireless camera would be provided in the
robot, which gives the user a clear picture of the location of bomb and thereby making
it possible to diffuse it.
Learning’s
- Objects analyzed
Wireless camera, Radio Remote control, Wheels, Detector sensor, Arms, Motors
- Control circuits
Transmitter circuits, Receiver circuit,
- DFM, DFA, PFMEA,FMEA
Extra Curricular Activities
- Participated in State level “TULIR”, A Quiz Competition.
- A District level Athlete.
- State Level Carom Board Player.
- Volunteered in various environmental and social awareness campaigns.

[Guest]

CURRICULUM VITAE

M.KADALSELVAN
Email : kadal7383 AT gmail.com
OBJECTIVE :
Provide an excellent talent and will help to growth our company profiles.
PROFILE :
- Having 3 years and 8 months experience in PLC Automation field
- Delta PLC, Siemens PLC S7-200 with HMI OP77 Series and Allen Bradley PLC with HMI
- Handling Servo motors Drives and Both Encoders
- Handling Pneumatic and Drives Controllers
- Knowledge of Panel board Design
- Knowledge of Panel Plate Wiring
- Knowledge of design tools like Solid Work DWG Editor and Auto-Cad
- Knowledge of termination and rectify the Error for the Panel board assembly part.

WORK EXPERIENCE :
- RESHMI INDUSTRIES (INDIA) PVT LTD, COIMBATORE.
Designation : Service Engineer.
Period : Aug 2007 to Aug 2008
Role : Electrical and Electronics services attend.

PROFESSIONAL EXPERIENCE :
Coordinating with the Service Engineer Head resolving customer problems
- Maintaining our product without any complaints and updating our PLC latest program setting
- BTSR sensor setting work checking and identify any of the problem occur
- Handling all type of Post Spinning Machineries
- Installation and implementations
- Trouble shooting and servicing.
- RANGA INFORMATICS PVT LTD, COIMBATORE.
Designation : Project Engineer in Electrical
Period : April 2009 to March 2010
Role : Electrical and Application Engineer
PROFESSIONAL EXPERIENCE :
- Electrical panel and circuit designing
- PLC configuration and programming
- Installation and implementations
- Trouble shooting and servicing.
DEVELOPED SYSTEMS :
- Diesel Pump Adoptor Pick & Place and Defeat testing
- Camlin Needle testing
- Simcard Base Testing used by PPT vision camera.
- QUATTRO ENGINEERING INDIA LTD(LMW SISTER CONCERN),

COIMBATORE.
Designation : Design Engineer - Electrical
Period : March 2010 to till Date
Role : Electrical Software and Application Engineer.
PROFESSIONAL EXPERIENCE :
- Software sequence development with necessary safety interlock
- Software and Hardware Selection and Integration
- Programming in variable Frequency Drive
- Installation of Machine at customers site and service support
- Analyzing and creating the technical requirements
- Presentation for Electrical layout and Flow chart
- Preparing the Bill of Materials as per customer requirements
- Design for Control panels.
DEVELOPED SYSTEM :
- Spring Brake force testing in Bobbin Holder
- Spindle Rail Pick & Place integrating with Robot
- Doffer Retrofitting in Ring Frame Machine
- Separator Bar Assembly of Ring frame Machine.
PROGRAM MANAGEMENT :
Interfacing with marketing teams to establish a basic project plan at early stages of product definition. Providing technical inputs &engineering support to the team from conception to completion stage of product. Preparing project plan, process flow chart, and managing resource required in various stages of program. Managing overall operation with a view to ensure timely accomplishment of project targets within the time and cost parameter.
EDUCATION QUALIFICATIONS :
S/NO INSTITUTE NAME COURSE YEAR OF PASSING PERCENTAGE
1 National College of Engineering, Tirunelveli. BE(ECE) 2004-2007
63%
2 Arasan Ganesan Polytechnic College, Sivakasi. DEEE 2001-2003
78.5%
3 N.A.Annappa Raja, Hr, Sec, School, Rajapalayam. HSS 1999-2001
72%

CERTIFIED COURSE :
PLC Programming in PSG College of Engineering Technology, Coimbatore.

SOFTWARE SKILL SET
Languages : MS-OFFICE,
Operating Systems : Windows 98, 2000, XP, and 7,
Designing : Auto CAD & Solid Work DWG Editor.

[Guest]

INDUSTRIAL AUTOMATION ENGINEER (ECE)
SURESH.G
B.E. (Electronics and Communication Engineering)
E-mail ID : g.suresh.engnr AT gmail.com

CAREER OBJECTIVE
To be a part of a fast growing reputed company, where I will be able to apply my knowledge and skills in a challenging and creative environment and effectively contribute towards the goals of the organization.
ACADEMIC DETAILS
QUALIFICATION
NAME OF INSTITUTION
UNIVERSITY/ BOARD
YEAR OF COMPLETION
PERCENTAGE
B.E. in Electronics and Communication Engineering P.B. College Of Engineering, Chennai Anna University,
Chennai
April 2011
74.5% (First Class )
Higher Secondary Class SSV SALA Hr. Sec. School, Madurai
State Board
March 2007
91%
(First Class)
S.S.L.C SSV SALA Hr. Sec. School, Madurai
Matriculation
March 2005
86.7%
(First Class)
SOFTWARE SKILLS
- Computer Basics : MS-Office (Word, Excel and PowerPoint).
- Programming Languages : C and C++.
- Application Languages : HTML.
- Simulation Softwares : MATLAB, Xilinx ISE 9.1i (VLSI Programming Software).
TECHNICAL PROFICIENCY
Certified in “Advanced Training in Industrial Automation (ATIA)” by TECHNOCRAT AUTOMATION SOLUTIONS PVT. LTD., Chennai.

- PLCs ( Programmable Logic Controllers )

BRAND
MODEL NO.
SOFTWARE

AB
(Allen-Bradley)
MicroLogix 1200 Series
RSLinx & RSLogix 500
Version-5.5

SLC 500

SIEMENS
Simatic S7-300 (CPU312C)
Simatic Manager Step7
Version-5.3

Simatic S7-200 (CPU224)

ABB
(Asea Brown Broveri)
ABB 07CR41 & XM06B5
(Advant Controller 31)
AC1131
Version-4.2

GE FANUC
Versamax Microcontroller
Versapro
Version-2.04

Series 90-30

OMRON
SYSMAC CP1E
CX Programmer CP1E
Version-1.0

SYSMAC CPM2A
CX Programmer CPM2A
Version-6.0

KEYENCE
KV24
Ladder Builder
Version-1.5
- SCADA (Supervisory Control And Data Acquisition)
- Wonderware Intouch - (Version-9.5).
- Intellution FIX 32 - (Version-7.2).
- DCS (Distributed Control System)
- Brand : ABB
- Controller : AC800M
- Programming Module : PM856
- Programming Software : PLC Control Builder AC800M (Version-4.0)
- Operator Interface (SCADA Portal) : My ePlant
- MMI (Man Machine Interface)
- Brand : ABB
- MMI Model : CP554 Landscape (Version-1.0x)
- MMI Designing Software : CP Programmer (1.00 Build 141.2.13)
- VFD (Variable Frequency Drive)
- Brand : ABB
- Model No. : ACS150-01E-04A7-2
- VFD wiring to load.
- Parameter selection of VFD.
- Programming and Commissioning.

- P&FI (Pneumatics and Field Instruments)
- Control Valves.
- I/P Converter.
- Level Transmitter.
- RTD.
- Thermocouple.
PROJECT
- Academic Project : In B.E. Final Year, 2011.
Platform : USING ZIGBEE
Title : Monitoring &controlling of premature babies .
My Role : Leadership and Project Development.
MINI PROJECTS
- Water Level Indicator.
- Multicomponent Tester.
STRENGTHS
- Excellent problem solving skills and a self starter.
- Creative thinking, Sincere and Hardworking.
- Good team player and good communication skills.
- Complete the work with satisfaction and perfection.
ACHIEVEMENTS
- Secured second place in paper presentation in the 2ND semester during the academic year 2008-2009 in our college.
- Anna university cricket player during 2011 & Runner among all Universities
- Venkateswara Rolling cricket trophy Winner 2011 held at SVCE

DECLARATION
I hereby confirm that the particulars given above are true to the best of my knowledge and belief.
Place : Chennai. Yours Obediently,
Date : (SURESH.G)