www.consultaenterprises.com Consulta Enterprises Mumbai : PLC, SCADA, DCS Automation Project Engineer

[mskavi]

Consulta Enterprises Mumbai, Mumbai Suburbs : Project Engineers / Automation Engineers
Website: http://www.consultaenterprises.com
consultaenterprises.com

Designation: Project Engineers / Automation Engineers
Experience: 1 - 4 Years
Location: Mumbai, Mumbai Suburbs

Job Description:
Project Engineer / Automation Engineer with 1-4 years of experience on Mid-size or Large Size projects.

Desired Candidate Profile:
We are looking for candidates with experience on DCS/PLC/SCADA for our ongoing projects in India and abroad.
Candidates should be Engineers/ Diploma holders in Electronics/Instrumentation.
Experience on Siemens S7/WinCC/ PCS7 preferred.

Company Profile:
Consulta Enterprises is a Mumbai based system project engineering company with primary focus on mid-size and large size DCS/PLC/SCADA solutions for process industries. We undertake complete automation, instrumentation and plant engineering projects for industries like cement, steel, power, insulators, water treatment etc.

Address:
Consulta Enterprises
1/4 , Teachers Bandra (E) Mumbai-400051
MUMBAI,Maharashtra,India 400051

Email Address: consulta.india@gmail.com

Keywords: PLC, SCADA, DCS, Automation, Siemens, PCS7, WinCC, S7 - 300, S7 - 400

[Guest]

SIJO P. K.
Email : sijo.pk AT gmail.com,sijo.pk AT rediffmail.com

Projects in SIEMENS PLC (S7-200,S7-300), Allen Bradley( Mcrologix1200,1500,Compactologix),Mitsubishi(FX series)Schneider (Twido) Drive (MM-440,PowerFlex,Mistubishi,Danfoss,Urotherm), WinCC Flexible HMI,Beijer HMI, Panel builder. SCADA(Intouch,Wincc) Project Management initiatives & deliver solutions for Industrial requirements
- Over 4 years’ experience in Automation field including PLC Programming and Interfacing, AC Drives Communication, HMI Programming, Communication and field instruments interfacing with PLC.
- Insightful experience in Project Management activities including project scoping, estimation, finalisation of technical / functional specifications, resource administration.
- Adept in handling various PLCs, HMIs, SCADA
- Adept at handling various field instruments like limit switches, Pressure switches and transmitters, flow instruments and transmitters, weighing instruments, etc.
- Strong problem solving skills, confident decision making based on extensive experience and technical skill enables effective solutions that positively impact customer satisfaction & operational costs.

Skills Sets :
TECHNICAL Skills :
- Siemens PLCs.(S7 300 , S7 200 And S5 Series )
- Allen bradely PLCs.(SLC, Micro logix, Contrologix and Compactlogix)
- Mitsubishi PLCs(Fx And Q-series)
- Siemens SCADA.(WinCC)
- Intouch SCADA
- Auto Cad

Languages : C and VB, 8051(Assembly Language)
Operating System : Windows
Microsoft Office components : Word, Excel, PowerPoint
- Ladder Programming, FBD Programming, STL Programming.
- HMI Programming & Interfacing
- Drives Communication

MANAGERIAL :
- Mapping client's requirements and providing them best solutions involving evaluation and definition of scope of project and finalisation of project requirements
- Providing end to end management of multiple projects from conceptualisation and visualisation to technology mapping and final execution of projects.
- Facilitating executive management in determining priority levels by developing project approval and prioritization process for new projects.
- Managing & leading team members; allocating resources among team members and guiding team members during the project till final delivery.
- Holding review meetings to monitor progress of the project as per schedule, and ensuring timely completion & delivery of the project to the client.

FUNCTIONAL :
- Designing, developing and debugging of SCADA, PLC and HMI programming and Interfacing.
- Implementing complex algorithms on high density, high frequency, performing timing analysis and Simulation of design.
- Preparing test plans and finalising various validation criteria.
- Setting up of the test environment for the testing of the product developed as per specifications.
- Tracking and identifying bugs in the Programs. Debugging the Program and preparing it for release to the end users.
- Developing, implementing, integrating and executing projects for development of hardware and software for complex encryption systems.

Organisational Experience :
Project Engineer
Active systems, Bhandub, Mumbai : Since Aug-07
Active Systems is the best System Integrator of SIEMENS PLCs, SCADA, HMIs & Drives. Projects engaged in Mechanical industries, Process controll.Designing, manufacturing & fabricating Control Panels. Work profile includes hardware and software design of controls using PLCs and SCADA.

Projects :
Conveying system.(S7-300,TP177 HMI)
These System designed for the Skoll Breveries Hariyana Beer plant. he PLC used is S7 300 with remote
Station control system. And interfacing with German Technology for washing , filling, pasteurising and labelling.
Bailer Conveyor system (S7-300, MP 177 HMI)
These Systems designed for the Reliance Industries Pvt. Ltd Patal Ganga for moving the final product for textile industry. These system is the combination of the three individual conveyors operating synchronously which will operate both in manual and automatic modes. The plc used is S7-300 with profibus communication.
Mazza Conveyor system (S7-300,MP 277 HMI)
These System designed for the Aminpur cocacola Pvt. Ltd ,Hydarabad for moving the final product for Coca cola.The PLC used is S7-300 with Profibus communication.
Double Twister Machine (S7-300, OP77B HMI)
These System designed for the KEI CAbles ltd, Dadra. Gujarat. for Twisting the cat 5 cable product for Cable industry. The System operate both in manual and automatic modes. The plc used is S7-300 with profibus communication.
Wire Feeding Mchine system (S7-300,MP OP77A HMI)
These Systems designed for the Mukund Hospet steels, Hospet for Wire Feeding system in Steel industry.
These Machine operate both in manual and automatic modes. The PLC used is S7-300 with Profibus communication.
Wire Feeding Mchine system (Compacto Logix And Panel view HMI)
These Systems designed for the JSW steel’s LTD, Vijay Nagar, Karnataka for Wire Feeding system in Steel industry. These Machine operate both in manual and automatic modes. The PLC used is Allenbradely with Control net communication.
CHavare Engineering Pvt. Ltd, Dombivli west, Mumbai ( Sep-05 to Aug-07)
Chavre engineering Pvt. Ltd is the best System Integrator of Mitsubishi PLCs, SCADA, HMIs & Drives. Projects engaged in Mechanical industries, Pharma Industries and Building Management System. Designing, manufacturing & fabricating Control Panels. Work profile includes hardware and software design of controls using PLCs and SCADA
PLC Based Hydro – Pneumatic System (FX2N PLC)
The differential pressure transmitter will sense the pressure in the discharge line, with respect to these feedback the PLC will determine the required flow by giving signals to drive (VFD) there by on and off the three drives at regular intervals.

Education :
- 2005 Diploma in Electronics from Gov : Polytechnic College, Triprayar, Kerala.
- 2001 Pre-degree in PCB from Sree Krishna College, Guruvayor, Kerala.

Internship Project :
Title : Data Acquisition System using Visual Basic
Duration : 6 months Team Size: 2
This system is used to accure the data from external devices or system and displayed it on the screen made on visual basic. The data acquisition is through RS-232 serial port. The project was to accure temperature details from the sensors and display on screen.

Personal Dossier :
Date of Birth : 06-01-1984
Language Known : English, Hindi, Malayalam and Tamil

[Guest]

VIKRANT R. GONDHALEKAR
e-mail : vikrantgondhalekar_06 AT yahoo.in

Objective :
Seeking a position to utilize my educational knowledge, skills and abilities in the growth of company that offers professional growth while being resourceful, innovating and flexible.

Major Strength :
Possess good communication, interpersonal and relationship skills and also believe to have creative problem solving and decision making skills. Follow professionalism, integrity, dedication and energy, drive and passion for my work.

Academic Profile :
Qualification University / Board Percentage Year of passing :
B.E 7th semester Mumbai university 66.00 Dec 2010
Third year degree 6th semester Mumbai university 65.03 May 2010
Third year degree 5th semester Mumbai university 61.64 Dec 2009
Final Year – Instrumentation (Diploma) MSBTE 71.77 2008
HSC Kolhapur 44.67 2005
SSC Kolhapur 70.80 2003

Professional Training :
- Training Course on PLC, DCS & SCADA at Honeywell Automation, Pune
- Training Program on DCS, PLC & SCADA at Rashtriya Chemicals and Fertilizers, Mumbai.
- Training Program on FIELD DEVICES, DCS, PLC & SCADA at Rashtriya Chemicals and Fertilizers, Mumbai.

Final Year Project of diploma :
Title : Highway Speed Checker
The instrument consist of Laser, LDR, Multivibrator , Decoder, Electronic circuitry, display and buzzer enabling to detect over speeding vehicles in control room.

Final Year Project of degree :
Title : Heart beat monitor using microcontroller
The instrument consist of Instrumentation amplifier, Filters, Multivibrator , A TO D Converter, Electronic circuitry, display and microcontroller IC through which we can calculate the heart beat of a human.

Insdustrial visits :
1) visit at BOURDEN AND GUAGES in kalamboli
2)visit at ALL INDIA RADIO in malad
3)visit at AUTOMATION CENTRE in goregaon

Software Skills :
Language Known : SCADA
C, Visual Basic
MS-Office
Java
Matlab

Extra Curricular Activities :
- Cricket team captain for three years (Diploma)
- Organized cricket tournament for college.
- Organized carrom tournament for college.

Achievements :
- Topper of second year diploma.
- 2nd topper of Final year diploma

DATE : - / /
PLACE : -Navi Mumbai
VIKRANT R. GONDHALEKAR

[Guest]

RESUME
VITTHAL NAMDEO PATIL
E-Mail : vitthal_98 AT yahoo.co.in
vitthal.98.vp AT gmail.com

Career Objective :
I would like to pursue a career with an Organization, which has vision and encourages creativity and offers me an opportunity to learn and develop as a quality person. I would like to use and enhance my practical knowledge, people management skills and ability to work in groups.

Educational Qualification :
EXAMINATION BOARD/UNIVERSITY YEAR AGGREGATE :
S.S.C Maharashtra state board 1999 66.53%
Diploma in Electrical Engg. MSBTE 2002 60.10%

Technical Expertise :
- Experience in PLC Coding and Hardware Configuration.
- Experience in SCADA Application Development, Communication Driver Configuration and Report generation.
- Project Documentation.
- Control Panel Engineering & Testing.
- Preparation of engineering drawings viz. Panel GA drawings, Power Distribution and I/O Drawings, Control schematics etc.
- Customers Support

Professional skill :
PLC Schneider : Tiwdo, Micro, Premium
Siemens :S7 200
SACADA Schneider : Vijeo citect 6.0/7.0 Aspic 3.30
HMI Schneider : XBT 1000E, Vijeo Designer 4.5/4.6
Siemens :TD 200/OP77B DRIVE ABB, Siemens MM 420/440, Telemechanic

Work Experience :
- 5 years in Process Control and Industrial Automation

1. Glorious Services
JOB PROFILE : Electrical Engineer
1. Responsible for carrying out all maintenance related schedule and shutdown.
2. Instructing and supervising maintenance technicians.
3. Responsible for planning spare list for all installations.
4. Periodically inspect the logbook and checklist.

2. Prolific Systems and Technologies Pvt. Ltd(Thane)
JOB PROFILE : Project Engineer
1. Project Documentation – Function Specifications, Hardware Design Specifications, Design Specifications, Test Procedures.
2. Project Engineering – PLC and SCADA Template designing, PLC Coding, SCADA Application Development, System Configuration, Panel Testing and Process simulation for Interlock testing.
3. End to end Project Coordination & customer communication for resolving issues and queries and updates on project progress.
4. Onsite Support to carryout Project Activity.

3. S.R.SYSTEM (Authorized system house of SIMENS Ltd.)
JOB PROFILE : Project Engineer
1. Designing of Engineering Projects/systems as per customer specification.
2. HMI ,PLC Programming.
3. Drive parameterization.
4. Electrical design of plc control panel.
5. Site Installation, erection and commissioning.

PROJECT UNDER TAKEN :
1. Automation of effluent treatment plant.
Plant Location : Al-Ghurair iron and steel (abu Dhabi)
Scope : PLC and HMI application development
Project highlight : Schneider premium PLC Vijeo designer HMI
Project process : automation of effluent treatment plant is manually Operated by operator and HMI system is used to Visualization and data logging. Actual status display on HMI screen. valves have several interlocks according to the process.

2. Automation of Gelatin De-Ashing Plant.
Plant Location : Triple trust (IRAN)
Scope : PLC and HMI application development
Project highlight : Schneider Micro PLC Vijeo designer HMI
Project process : The plc system will be used to control the De-ashing plant. According to
Selection of mode by operator plant will be run and actual status of plant will be display on HMI screen. valves have several interlocks and it will operate the whole plant.

3. Automation of A117 Plant
Plant Location : India
Scope : PLC and SCADA application development
Project highlight : Premium PLC Vijeo citect SCADA
Project process : full automation of plant involving recipe selection within SCADA
Batch downloading into plc as per the recipe selection and feeding emulation tank into reactor tank. valves have several interlocks according to the process. The total plant operation is automated using PLC and SCADA.

4. Automation of oil blending plant
Plant Location : India
Scope :PLC and HMI application development.
project highlight : premium PLC :Mengiles HMI
Project Process : Full automation of plant involving recipe selection within HMI to batch downloading into PLC and feeding base and additive oil into blenders as per the recipe selection. valves have Several interlocks according to the process.

5. Automation of bag printing system
Plant Location : India
Scope : PLC and SCADA application development.
Project highlight : Twido PLC vijeo citect SCADA
Project Process : the operation of system the plant is to print on moving HDPE
Bags with MRP as veriable with a counter base. the variable data and counter value send from a single PC to various 8 lines. The PLC used to take input of bag arrival and give specific trigger to The printer when bags arrival.

6. Automation of tube testing machine.
Plant Location :India
Scope :PLC and HMI application development.
Project highlight : Siemens CPU 224 PLC TD 200 HMI
Project Process : Automation of Tube Testing Machines for testing online bars Using ultrasonic system. The total system Operation is automated using PLC and HMI.

7. Automation of Cylinder testing machine.
Plant Location :India
Scope :PLC and HMI application development.
Project highlight : Siemens CPU 224 PLC TD 200 HMI
Project Process : Plc used for controlling the speed of two IM Probe one of which rotate The cylinder and another one will move the carriage (testing media) Over the cylinder which test the cylinder by ultrasonic waves.

8. Automation of MCB Machine.
Plant Location :India
Scope :PLC and HMI application development.
Project highlight : Siemens CPU 226 OP 77B
Project Process : Plc used for control the ON and OFF few motors and valve in proper Sequence as per signals came from the various sensors arranged The whole mechanical system.

[Guest]

Curriculum Vitae
Name : Sharad Bhanudas Gawade
Email ID : sharad_gawade12 AT yahoo.co.in

OBJECTIVE :
To Expertise and achieve excellence at work which provides opportunities for growth with contribution to the organizational goals & where my potential would be explored for the advancement & benefit of that organization through continued development of professional skills.

ACADEMIC PROFILE :
- B.E. in Instrumentation from Bharati Vidyapeeth CoE, Belpada with 63.24% in the year 2010.
- Diploma in I.E From Satara Polytechnic,Satara with 59.08%in the year 2005.
- H.S.C. From V.P.M College, Mulund with 48.17% in the year 2001.
- S.S.C. From W.M.M Vidyalaya, Mulund with 63.60% in the year 1999.

CURRICULUM PROJECT DETAILS :
DEGREE PROJECT :
- Name : Coil joint detection using PLC & Touch screen.
- Name of company : Technova Imaging Systems (P) Ltd, Taloja MIDC
- Description : Product aluminum coil joint will be tracked at every junction. Joint will display on touch screen with line speed of 25 mpm. Alarm will generate at each station few second. Graphical visual display on Touch screen. Required junction/stations will be stopped by PLC.

DIPLOMA PROJECT :
- Name : Digital clock with programmable bell using microprocessor
- Description : Project allows to display time & alarm will generate according to college time-table. We have prepared a microprocessor kit with back up so as to failure of electricity still it works properly. We use the microprocessor to feed the program for 24 hours clock & for college time table from Monday to Sunday.

TRAINING / COURSE :
- Undergone Five days training on “SCADA & DCS” at RCF, Chembur.

EXPERIENCE :
Company Name : UL Electronics Pvt. Ltd
Designation : Trainee Project Engineer
Joining Date : 6th Dec, 2010

I. BHEL (Water Treatment Project) Delhi :
Job Description : As Support Project Engineer
- IO Testing.
- Soft master (Honeywell PLC Logic Software), EPKS (SCADA Software) installation.
- Supporting for Logic Design.
- Graphics design on HMI Web Display Builder, VB Scripting.
- Quick Builder Data Base for interfacing between PLC Logic & SCADA.
II. DRIPLEX (Water Treatment Project) Delhi :
Job Description : As Project Engineer
- IO assigning & addressing.
- IO Testing.
- Soft mater (Honeywell PLC Logic Software), EPKS (SCADA Software) installation.
- Logic Design.
- Graphics design on HMI Web Display Builder, VB Scripting.
- Quick Builder Data Base for interfacing between PLC Logic & SCADA.
- HCIX Designer (Honeywell Touch Screen Graphics Software) installation, Graphics Design.
III. BHPV (Boiler Plant Project) Visakhapatnam :
Job Description : As Project Engineer
- IO assigning & addressing.
- Soft master (Honeywell PLC Logic Software) installation.
- Logic Design.
- Graphics Design on HMI Web Display Builder, VB Scripting.
- Quick Builder Data Base for interfacing between PLC Logic & SCADA.
IV. MIDREX (Sea water Treatment Project) Kalwa :
- Simatic WinCC (Siemens Graphics Software) installation.
- Graphics Design.
V. SHIRAGUPPI (Sugar Plant Project) Karnataka :
- Ferrul List Preparing, IO assigning.

OTHER TECHNICAL SKILLS :
- Basic Computer course and automation knowledge, Fair with C and C++ Languages.
- MS office, O.S. Windows 98/2000/XP.
- PLC: GE-Fanuc series 90-30, Honeywell PLC ML-200R
- EPKS SCADA software, QDB Software, HMI web display builder (Graphics Software).
- Soft master (Honeywell PLC Software).
- HCIX Designer (Honeywell Touch Screen Graphics Software).
- Simatic WinCC (Siemens Graphics Software)

[Guest]

Name Sunil Sham Pagare
Email : sunilsyba AT yahoo.com

SKILLS SUMMARY :
- 4 + years of experience in Project Management, PLC Programming & SCADA. Insightful experience in Project Management activities including project scoping, estimation, finalisation of technical / functional specifications, resource administration and quality management of the software / PLC application.
- Strong problem solving skills, confident decision making based on extensive experience and technical skill enables effective solutions that positively impact customer satisfaction and operational costs.
- Looking for team oriented positioning in your prestigious organization, where my skills, experience will be utilized to your full potential.

EDUCATION & TRAINING :
Educational Qualifications :
- Diploma in Industrial Electronic from Satara Polytechnic Satara, in January 1999.
- H.S.C. from S.I.W.S College – Mumbai in March 1996.
- S.S.C. from Sitaram Prakash High School in March 1994.

PROFESSIONAL QUALIFICATIONS :
Certificate Courses :
- Certificate Course in Electrician from Abhinav Technical Institute, Dadar (W), in July 2001.
- Certificate course in PLC (Allen-Bradley, Siemens with RS Logix-500) & SCADA (RSView32) from Govt. Polytechnic, Mumbai.

Computer Skills (Apart from Electronic) :
- Certificate Course in AUTOCAD-2004 (2D + 3D) from Slash Computers, Dadar (W), in March 2002.
- Advance Diploma in Office Automation and Graphics from G. N. Computers, Parel (W), in April 2005.
- Documentation in Microsoft Excel, Word.
- Presentation in Power Point,
- Graphics Designing in Corel Draw, Page Maker, Photoshop.
- Engineering drawing in AutoCAD-2004.
- Knowledge of Computer Hardware & Networking.

EMPLOYMENT SYNOPSIS :
- Organisation : M/S. NM AUTOMATION & CONTROL PVT. LTD. (SYSTEM INTEGRATOR, SCHNEIDER. FRANCE)
Designation : Sr. Engineer – Projects
Duration : May 2007 – May 2011
Task & Responsibilities :
- Designing PLC and SCADA system as per IO requirements of system and complete configuration of PLC and SCADA systems.
- Design, Development, Installation and Commissioning of PLC, HMI, SCADA , AC Drives and MCC and PLC panel
- SCADA application involving Alarm Management, Trend Management, Audit Trails, Auto Log Off, Database Backup and Restore feature.
- Mapping client's requirements and providing them best solutions involving evaluation and definition of scope of project and finalisation of project requirements.
- Project documentation, guidance to the software development engineers for developing the applications as per the user’s needs. Commissioning of the system, performance monitoring after system is commission. Hand over of the system. After sales support and customer care. Keeping in touch with system user for new development, requirements and further business development.
Certifications & Key skills :
- Expertise over Schneider Electric automation products viz. on following Platforms.(Software & Hardware expertise)
PLC Used :-
- NANO & ZELIO industry version PLC & Smart Relay.
- Enterprise version TWIDO and MICRO Platform.
- Premium with Unity Processor. PLC Platform.
MMI Used : - XBT-F, XBT-G, XBT-H and XBT-N
SCADA : - Indusoft Web Studio, VijeoCitect
Communication Protocol :-
- Communication expertise over communication protocol viz. MODBUS ,
Modbus Slave, ETHERNET, TCP/IP
Database : - SQL Server 7.0, MS Access, MS Excel.
Programming Language : - Ladder Language and Functional Block Diagram.
AC Drives : - ATV-31, ATV-11, ATV-38, ATV-71.

MAJOR PROJECT EXECUTED :
- MACHINES
a. Wire Drawing Machines (PLC (TWIDO), MMI, DRIVES (ATV-71), MODBUS PROTOCOL)
End user : - VENUS WIRE LIMITED. (KHOPOLI)
b. RMG (PLC (TWIDO), MMI (XBTN-401), DRIVES (ATV-31), MODBUS PROTOCOL)
End user : - GROUPS ELECTRICAL. (VASAI)
c. Dove Pressing (PLC (TWIDO),
End user : - MOGINE CAKE (ANDHERI-W)
d. Powder Filling .(PLC (FATEC), MMI (XBTN-401))
End user : - FABTECH TECHNOLOGIES INTERNATIONAL PVT. LTD. (ANDHERI-W)
- Water Treatment Plants. (UF, RO, EDI, DM, USP, WFI)
a. Alkem Pharma Pvt. Ltd. (Baddi & Daman) BY : - PBS PVT. LTD.
b. IPCA Laboratories Ltd. (Baddi). BY : - WRIPO WATER LTD.
c. Raw Sewage Plant. (Dubai) BY : - BIOTECH PVT. LTD.
d. Concepts Pharma Pvt. Ltd. (Aurangabad). BY : - HYDROCONS PVT. LTD

1. Boiler System.
- Development ,Installation and Commissioning of the Plant having Schneider Premium PLC (unity processor) and Indusoft Scada on TCP/IP protocol and controlling various PID Loops.
- Commissioning of Schneider make MMI on Unitelway Protocol
- The system was to control the Steam supply according to the requirement plant.
End user : - SUDARSHAN CHEMICAL INDUSTRIAL LTD. (ROHA)

2. AZO PIGMENT SCADA SYSTEM.
- The system was to Simulation Addition of Acid and Alkali which required in Pigment batch Process according to the time set and controlling various PID Loops. in Pigment Manufacturing plant.
End user: - SUDARSHAN CHEMICAL INDUSTRIAL LTD. (ROHA)

3. ICE MAKING & CONVEYING SYSTEM - II.
- Development, Installation and Commissioning of the Plant having Schneider makes 3nos. Twido PLC on TCP/IP and 1 Micro PLC on MODBUS I,e (Ice Manufacturing PLC) and Indusoft Scada as master on MODBUS protocol.
- The system was to Manufacture Ice and to control Ice Delivery to varies reactors, which is used in Pigment Manufacturing and various other factors in Ice Manufacturing plant.
End user: - SUDARSHAN CHEMICAL INDUSTRIAL LTD. (ROHA)

4. 21 CFR COMPLIANT BUILDING MANAGEMENT SYSTEM
- Installation and Commissioning of 21 CFR compliant Building Management with Schneider PLC (unity processor) and Indusoft Web Studio Scada on TCP/IP protocol. System included Temperature, RH & Diff Pressure monitoring and controlling with Local Displays on TCP/ IP Protocol. Equipment monitoring with Mitsubishi PLC communicating on Modbus Ethernet Protocol.
End user: - ENCUBE ETHICALS LIMITED (GOA)

5. 21 CFR COMPLIANT BUILDING MANAGEMENT SYSTEM
- Installation and Commissioning of 21 CFR compliant Building Management System with Schneider PLC (unity processor) and Indusoft Web Studio Scada on TCP/IP protocol. System included Temperature, RH & Diff Pressure monitoring and controlling with Local Displays on Modbus Protocol.
End user: - FDC LIMITED (GOA)

6. HYDRANT REFULLING SYSTEM
- Installation and Commissioning of HYDRANT REFULLING SYSTEM with Schneider PLC (Twido) and VijeoCitect Scada on TCP/IP protocol. System was to Filling of ATF (AVIATION TURBINE FUEL) to various AIRCRAFT and control the same via. Diff Pressure and various other factors in HYDRANT REFULLING SYSTEM.
- Remote Monitoring and Controlling on VijeoCitect Scada TCP/IP protocol.
- Energy Meter & Mass Flow meter on Modbus Protocol.
End user: - BHARAT PETROLEUM CORPORATION LTD, (INDIAN AIR FORCE STATION - GWALIOR)

- Organisation : M/S. INDO GERMAN PHARMA EQUIP. (Andheri)
Designation : Electronic Engineer
Duration : August 2006 – April 2007
Task & Responsibilities:
- PLC & MMI Programming.
- Coordinating for customer support and coordination.
PLC Used 1) Allen Bradley – Micrologic-1200.
2) Siemens – CPU 224, CPU 222.
MMI Used 1) Renu – Prizm-140.
2) Renu – Prizm-285 (Touch Screen)
- Part Time (7 to 10 pm)

Organisation : G. N. Computer Institute (Parel)
Designation : Faculty
Duration : From March 2006' – July 2006’
Task & Responsibilities:
- Teaching: - M.S.C.I.T, MS Office, Page Maker, Corel Draw – 12, Photoshop – 7, AutoCAD – 2004, Internet and complete Hardware Theory.

- Organisation : M/S. SYPA TECH (INDIA)
Designation : Service Engineer X-Ray Machine.
- Duration : From Feb 2000' – August 2006’
Task & Responsibilities:
- (10mA-100mA) X-Ray Machine Servicing & Repairing.
- Coordinating & Monitoring Production, Service & Q.C. Department.
- Also worked as AutoCAD Draftsman for Drawing Electrical Circuits as well as Mechanical Diagrams.
- Team Leader for ISI (BARC) Approval Project.

[Guest]

M.MADHU NIHANTH
E-mail : nian777 AT gmail.com

OBJECTIVE :
I wish to work with an organization, which gives more exposure and best standards where I can widen my knowledge base and work hard. I would like to be an asset to the Organization for which I am working and improve my career by rendering effective contribution to the organization.

EDUCATIONAL BACKGROUND :
Qualification Year of Passing School/ College Board/ University Percentage Obtained :
B.Tech (ECE) Mar-2010 VITAM JNTU 67%
Intermediate (MPC) Mar-2006 Vikas State 79%
Class X Mar-2004 JMJ State 79.5%


ACHEVIMENTS :
- worked on a project for my B.Tech Degree on “Eye Detection, Using Variants of Hough Transform”
- Undergone industrial training at All India Radio Visakhapatnam on 10 kW FM and 100 KW MW Transmitters
- Active Participation in poster presentation on “NEUROPROSTHETICS” at Nation level Competition AADYOTA-08
- Got 1st in a test in secondary education conducted by Patashala organization

CERTIFICATION
- Certified Automation Engineer
At Prolific Systems & Technologies Pvt. Ltd
Siemens
Allen Bradley
Drives
Instrumentation
Panel Designing
SCADA
DCS

COMPUTER KNOWLEDGE :
- Programming Languages : C & VHDL
- Operating System : Windows 98, Windows Xp, Ms Office
- Computer Fundamentals

STRENGTH :
- I am dedicated at my work
- Ability to do work independently and in team environment
- Ready to face challenges
- Hard worker
- Passion to finish the work once decided
Statements given above are true and correct to the best of my knowledge

Madhu Nihanth

[Guest]

Simranjit Singh Arora
Email : singh.simran2011 AT gmail.com

Visa Status TIER 1 Post study work visa for UK (valid till January 2013)

PERSONAL STATEMENT :
My aim is to secure a control systems engineering position in a high growth establishment with considerable advancement opportunities.
I am highly organized, analytical and detail-oriented. Being a patient listener, I can fully focus on speakers and understand variety of accents. I have strong skills in time management, prioritizing tasks and meeting deadlines.

QUALIFICATIONS :
2009 - 2011 MSc in Control Systems Engineering (73 %)
University of Sheffield, United Kingdom
- Studied core subjects as Neural Networks, Fuzzy Logic, System Reliability, Kalman Filter design, Predictive Control, Adaptive control, Embedded Control Systems, System identification, Image processing, basic control systems, State space, optimal control and nonlinear systems.
- Studied modules like SCADA, DCS and PLC’s.
- Finished project entitled “Machine Learning using Group Lasso”. Group Lasso algorithm provides extensive application in the field of Pattern Recognition, Classification problems, Statistics, Engineering, Medical Sciences and Business Planning. This algorithm is far more superior to commonly used Least Squares algorithm in terms of accuracy, simulation time and number of misclassifications.

2004-2008 B.Tech in Electronics and Communication Engineering (70.86 %)
Uttar Pradesh Technical University Lucknow, India
- Studied core subjects as Electronic Measurements and Instrumentation, Electromagnetic Field Theory, Energy Conversion, Microprocessors and Applications, Automatic Control Systems, Semiconductor material and devices, Signals and Systems, Solid state devices and circuits, Switching theory, Analog and Digital circuits, VLSI design, Digital System Design using VHDL, Wireless communication, Analog and Digital Communication, Data Communication, Network Theory, Data Structures using C.
- Completed project entitled -“Line following obstacle avoiding robot” using AVR Microcontroller”. This project has vast usage in the field of autonomous vehicles and robots reducing manual work and increasing efficiency of machine. The project involves Assembly language coding which gives insight for future work leading to Neurorobotics where humans and animal’s intelligence is applied for decision making in machines and robots.

2008 Design of ALU using VHDL (verilog hardware descriptor language)
Vedant Semiconductor Technologies Lucknow, India

2005 SIDDHAST Network Security Developers
Computer Course – ETHICAL HACKING Ghaziabad, India

2002 - 2003 Higher Secondary Certificate (79.8 %)
Board of ISC –Indian School Certificate
City Montessori School, Lucknow, India

2000 - 2001 Secondary School Certificate (75.2 %)
Board of ICSE – Indian Certificate of Secondary Education
City Montessori School, Lucknow, India

SOFTWARE SKILLS :
Language/Software Level Years of Experience
C++ Intermediate 12
MATLAB/Simulink Intermediate 5
VHDL Intermediate 3
Maple Intermediate 2
MS Office Expertise 11
Auto CAD Beginner 4 Months

PERSONAL ACHIEVEMENTS :
2009 Secured 93.42 percentile and All India Rank of 2792 in GATE Got offers for PhD from IIT (Indian Institute of Technology), India
2008 Secured 800/800 in Quantitative section in GRE (Graduate Record Examination) Among the highest percentile all over the world
2003 Secured highest marks in Mathematics, Physics and Chemistry in class 11th Conducted by CMS, India
2000 3rd in Inter House Badminton Competition Conducted by CMS, India
1997 2nd in Paper presentation on Garbage Disposal at National Level Conducted by 6th National Science Congress, India

[Guest]

RESUME
DEEPAK KUMAR MAHTO
Email :djricky143 AT gmail.com

Career Objective :
I am creative and looking ahead to work in a challenging environment and strive for excellence in an Organization where growth, prospects are unlimited and individual is recognized by his work as professional.

Career Interest :
- I am reliable, well organized and used to working on my own initiative & able to prioritize my work.
- Strong general management, negotiation, inter-personal, communication and team building skills.
- Excellent communication skills with the ability to interface at all levels. A team player who also can work well independently.

Career Profile :
Currently working in Western Electricals, Indore (M.P).

EXPERIENCE :
(1) Company : Technocrat Automation Solutions Pvt. Ltd., Chennai
Designation : Industrial Automation Trainee
Duration : May 2011 to September 2011

(2) Company : Western Electricals ,Indore,(M.P)
Designation : Automation Engineer.
Duration : December 2011 to Till date.

Job Description :
Working as a Automation Engineer in Western Electricals for integration of their Machines with PLC’s & calibration of various other field instruments.

Summary :
- Setup, Installation, designing, panel wiring & commissioning for their PLC’s & Calibration of field instruments.
- Programming for Siemens & Mitsubishi PLC’S of company according to processes involved for Manufacturing of Transformers.
- Troubleshooting of various field instruments.

Educational Qualification :
Qualification Institute/College Board/University Year Of Completion Mark (%) :
XTH Jawahar Navodaya vidyalaya,sijulata CBSE 2004 68
XIITH Jawahar Navodaya vidyalaya,sijulata CBSE 2006 59.4
B.E (ECE) Acropolis Institute of Technology & Research Rajiv Gandhi technical University,(RGTU) 2011 63

Software & Hardware Skills :
Language : Ladder Logic & FBD in PLC,SCADA & DCS Platform, C, C++.
Packages : MS Project 2007, Flash Programmer.
Operating System
Multimedia : MS DOS, Linux, & Windows (all operating system).
PHOTOSHOP, PAGE MAKER & COREL DRAW

Technical Skills :
Certified in “Post Graduation Diploma in Industrial Automation (PGDIA)” by Technocrat Automation Solution Pvt. Ltd
SCADA (Supervisory Control and Data Acquisition) :
- Company : - Wonder ware In touch (Version 9.5).
- Company : - Intellution FIX32 (Version 7.2)
PLC (Programmable Logic Controllers) :
- ABB (Asea Brown Broveri) : - 07CR41 (Digital), XMO6B5-Advent Control, AC1131 & Version 4.2.
- SIEMENS : - S7 300- Microwin32, Simatic, CPU222 & Version-6.3
- AB (Allen Bradley): -RXLogix500/SLC500, Micro Logix, RSLogox, 1200series C, Version-5.50.
- KEYENCE: - KV40R-KV Ladder Builder.
- GE FANUC : -Versamax, IC200UEX626-B-Versapro & Version-2.02.
- OMRAN:- SYSMAC, CMP2A, CX Programmer & Version-6.0.
- MESSUNG : - Nexgen 2000,CPU-P2211,Codesys Version-2.3
- MITSUBISHI: - FX-64 M, GX Developer(Melsoft).
- SCHNEIDER : -: - Model no.- TWDLCAA24DRF,Modicon TSX Micro, Software- Twidosoft Version 3.5
VFD (Variable Frequency Drive):
- Selection Of VFD Based on load and application,
- VFD wiring to load,
- Parameter selection of VFD,
- Model no.- ACS150_01E_04A7_2.
- Programming and Commissioning (ABB ACS 800 Series).
P&FI (Pneumatics & Field Instruments):
- Pneumatics- ON/OFF Solenoid valves, Piston Displacements, Control Valves, and Actuator.
I/P Converter
Level Transmitter
Flow Transmitter
RTD
Thermo Couple.
DCS (Distributed Control System):
ABB-AC800M Controller:
- Software : PLC Controller Builder,
- Model : PM854,
- Controller Programming,
- Base Core Processor and Node Addressing,
- Operator Interface (My Eplant),
- MMI Designing (CP554),CP Programmer.
- Interfacing with scada.(OPC Server)
- Communication Protocols (Ethernet, Modbus, Profibus, Optical Modbus).
HONEY WELL-HC900 C50:
- Software : Hybrid Control Designer,
- Model : HC900-C50-Version-2.1X,
- Controller Programming,
- Processor I/O Addressing,
- Operator Interface (Experion Vista),
- MMI Programming (HCI Designer),
- Interfacing with Scada.
- Communication Protocols (Ethernet, Modbus, Profibus, Optical Modbus).
HONEYWELL-PAC (Programmable Automatic Controller):
- Hardware Configuration.(series-ML-50,Model no.-MLMDN32S)
- CPU Type- MLMXBMS.V.1.7
- Software : Softmaster 2.2
- I/O Modules. Troubleshooting.
- I/O Wiring.
- Networking Of-Experion/PAC/C50/HC.

Real Time Interface:
- Process Control.
- 2-Axis Motion Control.
- Servo Drive/Motor.(Servo Drive Model no.-Delta ASD-AO421LA,Servo Motor Model no.-ASMT04L250AK)
- Encoder.

Hands-On Experience:
- PLC using in relay logics and ladder logic (LD), Functional block diagram (FBD).
- PLC Programming in timer, counter configuration and instruction set.
- PLC Programming in PID mode and PLC using analog IOs, memory bit IOS addressing.
- PLC Interfacing in MMI and SCADA.
- SCADA working in Tag Group and Dynamic Data Exchange (DDE).
- SCADA working in Real time and Historical Trend.
- SCADA input and output driver configuration and interfacing with PLC.
- VFD working in commissioning and NO load test.
- VFD checking load in rated voltage, current and RPM.
- DCS using in ladder logic diagram (LD), Functional block diagram (FBD).
- DCS Programming in timer, counter, PID mode.
- DCS using analog IOs, digital IOs.
- DCS Interfacing in MMI and SCADA.
- DCS communication bus (PROFI bus, MOD bus, RS232) with MMI.

Project Handled:
TITLE : Wireless Voice & Data Transmission through IR.
SOFT WARE USED : TINA Pro
DESCRIPTION : In this project, we have designed the circuitry for voice as well as Data transmission to a distance using IR (INFRA-RED) LED.
FUTURE SCOPE : Applications for video transmission include high quality video Trunked from studio Transferee, Broadcast CATV video, Video Trunking within city or between cities, Baseband Video for closed.

In-Plant Training:
Done Industrial Tanning in AUTOSYS, Indore
DESCRIPTION: I took this in-plant training during sixth semester. During that I studied PLC, SCADA, AC & DC Drive. I learnt some basic Programming in ladder logic.

Extra Curricular Activities:
- Participated in “eTRIx” Autonomous Robotics Workshop Conducted by “ThinkLABS” a Joint venture of IIT Bombay.
- Participated in Workshop Conducted by “SCIENTECH” Indore in “Circuit Designing”.
- Participated in ANNUAL TECHFEST 2009 held in Acropolis ,Indore
- Winner of Regional level GK Competition organized by IPTA.
- Participated in inter school volleyball.

ACKNOWLEDGEMENTS:
I hereby declare that the above mentioned particulars are true and correct to the best of my knowledge and belief.

Yours sincerely,
Place: Sonua
Date: 22/01/2012
DeepakKumar Mahto.

[Unregistered]

Mr. YEDURE PRASHANT RAMESH
Email id : prashantyedure64 AT gmail.com Address:

Objective :
Seeking a challenging career position in an organization where I can use my technical skills and creativity for making a significant contribution for the growth and development of company.

Educational Qualification :
B Tech [Instrumentation Engineering]mShri Guru Gobind Singhji Institute of Engineering and Technology, Vishnupuri, Nanded (M.S.)

Sr. No. Examination Board/University Period Grades/Percentage :
1 Final Year SGGSIE&T 2012-2013 8.25
2 Third Year SGGSIE&T 2011-2012 7.86
3 Second Year SGGSIE&T 2010-2011 7.46
4 First Year SGGSIE&T 2009-2010 7.83
5 HSC Latur Board 2007-2008 79.17%
6 SSC Latur Board 2005-2006 75.86%

Technical skills :
Programming : 8085, 8051 Assembly Programming, C, C++, PLC, SCADA,DCS.

Strengths :
Positive attitude, Optimistic in nature, Adaptable to changes, Good Team Player

Curriculum Interest :
** Sensors and transducers.
** Programmable logic controller.
** Process control.

Industrial Exposure :
Training at ‘RASHTRIYA CHEMICALS&FERTILIZERS CHEMBUR, MUMBAI’ in Jan 2012.

Projects/Technical Paper presentation :
** Final year project on “PLC based Farm Automation’’ which includes measurement like temperature, level, moisture etc and controlled the final element as motor.
** Project work on “Designing of Temperature Transmitter gives output in the range of 4-20 mA for the temperature range of 40-100 deg c using Operational amplifier”.
** Project work on building “Temperature Controller using Op-Amp”.

Extra Curricular Activities :
** Coordinator of the National level event ICON (Biomex) in PRAGYAA-12.
** Worked as an Anchor for National level event ICON (PPT) in PRAGYAA-11.
** Worked as a volunteer for National level event ROBOTICS (ROBOWAR) in PRAGYAA-10.
** Participated for group dance competition in UTSAV-11.

Personal profile :
Date of Birth : 04th June 1991.
Languages : English, Hindi, Marathi, Kannad (not fluent).
Nationality : Indian
Marital status : Single
Hobbies : Singing, Dancing, Net surfing, Swimming, Cooking etc.

Declarations :
I hereby declare that the information given above is true to the best of my Knowledge.
Place : Pune
Date : 15/08/2013
Yedure Prashant Ramesh

[Unregistered]

Ameet R.Dhumal
E-mail : dhumalamit007 AT gmail.com

PERSONAL DETAILS :
Date of birth : 11th April, 1992.
Languages : English, Hindi, Marathi

CAREER OBJECTIVE :
To be associated with a progressive organization that gives a scope to update my knowledge and skills in accordance with the latest trend and be a part of a team that dynamically works towards the growth of the organization.

EDUCATIONAL QUALIFICATIONS :
Pre-Engineering Qualification :
Class School/College Board Year Percentage Marks :
S.S.C Swami muktanand High School, Chembur Mumbai 2006-07 81.38%
H.S.C. N. G. Acharya College, Chembur Mumbai 2008-09 73.17%

Engineering Qualification :
Branch : - Instrumentation engineering
Class College SEM I SEM II
B.E P.V.P.I.T. College 71.00% 74.38%
T.E. 67.75% 68.50%
S.E. 63.63% 62.13%
F.E. 56.44% 58.07%
Overall Aggregate : 65.24%

TECHNICAL SKILLS :
Programming Languages : - Ladder logic, LABVIEW, C, C++.
Software’sKnown :-
PLC : - Ladder builder, CX-programmer, RS-logic500
AC1131, Sematic Manager
SCADA : -Wonder wareIn touch

COCURRICULAR ACTIVITIES :
TRAINING :
** Certified in “Certified Automation Engineer (CAE)” by Technocrat Automation Solution Pvt. Ltd. Chennai. (6 PLC, SCADA, VFD, Pneumatics & Field instruments)
** ‘DataShirol Sugar Factory’ (six days).

PROJECTS :
Title Brief outline Year :
INDUCTION MOTOR FAULT DETECTION AND MONITORING BY USING PLC TEMPERATURE, OVERVOLTAGE, OVERCURRENT, VIBRATION 2012-13
POWER ELECTRONICS ‘VARIABLE POWER SUPPLY’. COMPONENT & PCB MOUNTING 2011-12
ENVIRONMENT ‘SAFETY & POLLUTION CONTROL IN PAPER INDUSTRY’ WORKING OF ETP PLANT & SAFETY RELATED PAPER INDUSTRY 2010-11

SEMINARS :
Title Brief outline Year :
“WIRELESS SENSOR NETWORK IN PROCESS INDUSTRY” IMPLEMENTATION OF THE WIREESS SENSORS IN THE PROCESS INDUSTRY 2012-13

ACHIEVEMENTS :
** Secured 3rd Rank in sem-3 for academic’s2010-11.
** Secured 1st rank in SSC for math’s.

EXTRACURRICULAR ACTIVITIES :
** Participated in the SENTRANSE event conducted by the PVPIT.
** ‘ECO CLUB’ Quiz competition.
** Captainship in Annual Cricket Sports winning team.

HOBBIES :
** Driving
** Swimming
** Writing Diary

STRENGTH :
** Deterministic.
** Good team leader.
** Perfectionist.

DECLARATION :
The above information is true to the best of my knowledge and belief.
Place : Mumbai.
Date : 28/06/2013
Signature :

[Unregistered]

CURRICULUM VITAE
Name : PRATIK PRAMOD VAIDYA
Email : pratikcool92 AT yahoo.in

OBJECTIVE :
To work in an Organization that I can deliver my responsibilities for achieving the goals, & bright future of the organization, as well as to give a positive thrust to my career.

ACADEMIC PROFILE :
Examination Discipline/ Specialization School/college Board/ University Year of Passing % class :
B.E Electronics And Tele- Communication Gharda Institute Of Technology MUMBAI 2013 FIRST CLASS
H.S.C ---------------- S.E.S. college Dahisar MUMBAI 2009 69.67%
S. S. C ------------------ Vidya mandir Dahisar MUMBAI 2007 78.30%

TECHNICAL SKILLS & EXPERIENCE :
** Visual basis
** Keil compiler
** Completed Internship Training At Doordarshan Kendra, Mumbai
** Completed Post Graduation Degree Industrial Automation (PGDIA) from Prolific Systems & Technologies PVT. LTD.
I. Automation General & PLC Basics
II. Four leading brands of PLCs (Allen Bradley, Siemens, Modicon, Ge Fanuc)
III. DCS Systems ( Fisher Rosemount Delta V )
IV. SCADA (Wonderware InTouch)
V. Drives
VI. Electrical Systems
VII. Instrumentation Systems
VIII. Hydraulic and Pneumatic systems
IX. HMI

STRENGTHS :
Sincere towards the work undertaken, hardworking, achievement with punctuality, disciplined, eager to reach the objective, self-satisfaction, team work, confidence, practical Knowledge.

ACADEMIC PROJECT :
Project Title : Zigbee Based Wireless Industrial Automation
Team size : 4
Duration : 1 year
Environment : .Net

Description :
The Zigbee Based Industrial Automation aims the study of Zigbee module & Industrial
Automation. Zigbee is a protocol used for reliable wireless network monitoring & to control
Different loads like Fan, Heater, Air Conditioned systems etc. We provide study of Zigbee technology in Industrial Automation. Here proposed project enables automatic as well as distance switching of industrial device along with the sensor data back up on computer side.
We are working with SHT10 interfacing & Inter IC Communication (I^2C).

Responsibilities :
According to our project it is believed that the system presented in this paper would beneficial for selecting Zigbee protocol.
As a team our responsibility was to see to it that our project is completed on time, with all the required specifications and applications. We are creating an application in which our main goal is to use such system in the fields where human interaction is hazardous like Nuclear Power Plants, Chemical Plants etc.

CO-CURRICULAR ACTIVITIES :
** Worked as a treasurer & event co-ordinator for Students Organization named “PULSE” for 2 years.
** Participated in the event “paper presentation” in National Level Technical Event ICUBE 2013
** Completed RF Devices & Antenna Design Workshop conducted under discipline of ISTE At Gharda Institute of Technology.
** Completed Global Positioning System conducted under discipline of ISTE At Gharda Institude of Technology.
** Worked as a Co-ordinator for Fish Pond event of Synergy 2012.
** Worked as a Co-ordinator for Chess of Annual Sports 2013
** Presented B.E. project in shodh 2k13 Techfest..
** Participated in “continuous 12hrs studying tribute program”
** Participated in “PLC & SCADA” workshop of SMAC AUTOMATION.

PERSONAL PROFILE :
Name : PRATIK PRAMOD VAIDYA
Father’s Name : PRAMOD GOVIND VAIDYA
Sex : MALE
Date of Birth : 24/01/1992
Nationality : INDIAN
Languages Known : ENGLISH, HINDI, MARATHI

DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge.
PRATIK PRAOMOD VAIDYA