PDMS, PDS CAESAR/STAADPRO/ STEAM TURBINE DESIGN Bangalore, Chennai, Dubai/ UAE

[mskavi]

7HILLS JOBS Bengaluru/Bangalore, Chennai, : CAESAR/STAADPRO/ STEAM TURBINE/WATER SYSTEM / MH DESIGN ENGINEERS
Website: http://www.7hillsjobs.com

Keywords: STAADPRO, CAESAR , PDMS , PDS , I&C ,HEAT & MASS BALANCE, DESIGN, ENGINEERS&CONSULTANTS, EERACEWAY, MICROPROTOL , PVELITE, RCC, STRUCTURAL , STEEL , HVAC, OIL&GAS, MICROPROTOL, FPSO, DREDGING, MEP , INTOOLS, BULK MATERIAL HANDLING , Water System ,
Designation: CAESAR/STAADPRO/ STEAM TURBINE/WATER SYSTEM / MH DESIGN ENGINEERS
Experience: 5 - 10 Years
Location: Bengaluru/Bangalore, Chennai,
Dubai/ UAE
Compensation:
Re-locate to Bangalore/Chennai!! MNCs/HNCs Excellent C2C package, Regular Courses,Salary details,Appointment of ALL Employment,GOOD Academic Record (with PROOF) Job Hoppers NOT WELCOME , WELCOME for RECENTLY SIGNED OFF ENGINEERS FROM MNCs
Education:
UG - B.Tech/B.E. - Any Specialization
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 15 Jun 2009

Job Description:
BE-5to25yrs Exp.in ENGG. CONSULTANCY/ EPC Cos involved in OIL&GAS /POWER/PROCESS/ ENGG. Cos ( Big/ Medium /Small) /FPSO - Exp.in DESIGN ( for ENGINEERS) STAADPRO/ CAESAR/ PIPING/ ELECTRICAL/Steel/ RCC/Bulk Materials Handling/ PV ELITE /Water System

Desired Candidate Profile:
Exp.in ENGG.CONSULTANCY Firms (Medium/Small)(OIL&GAS / POWER/PROCESS )/ EPC Cos. with Exp.in DESIGN ( RCC/STEEL/ XSTEEL/ PIPING) (Isometrics),STRESS ANALYSIS ,CAESAR,ELEC,STAADPRO, FPSO,MICROPROTOL,PVELITE, Materials Handling , RIGS,MEP, ARCHITECT,

Company Profile:
Our Clients,MNCs/HNCs need DESIGN ENGINEERS ( CAESAR/ STAADPRO/ RCC /STEEL /STRUCTURAL/ PIPING / ELEC/ PROCESS /P&ID/FPSO ) ( incl. MICROSTN-PDS/PDMS/XSTEEL/ELEC/ I&C/ STAADPRO/ Materials handling) in OIL&GAS,POWER, PROCESS Consultant, EPCC

Executive Name: M.Balasubramanian,M.Tech( IIT,Kgp )

Address:
Not Mentioned

Email Address: jobs4you@sify.com

Telephone: 044-24902837

Reference ID:
DESIGN ENGINEERS(STAADPRO/FPSO/XSTEEL/CAESAR/PIPING/ELEC/I&C)(Oil&Gas /POWER/MICROPROTOL, FEA,Consulting/Materials Handling/EPC Cos)/(PDMS/PDS/PIPING /XSTEEL/ELEC/I&C/RCC /STRUCTURAL/ARCHITECTURE)(MEP),JASPER ETL,LINUX SERVER,DREDGING,PROCESS DESIGN

Keywords: STAADPRO, CAESAR , PDMS , PDS , I&C ,HEAT & MASS BALANCE, DESIGN, ENGINEERS&CONSULTANTS, EERACEWAY, MICROPROTOL , PVELITE, RCC, STRUCTURAL , STEEL , HVAC, OIL&GAS, MICROPROTOL, FPSO, DREDGING, MEP , INTOOLS, BULK MATERIAL HANDLING , Water System ,

[bhalchandra vachakal]

Mr. BHALCHANDRA DATTATRAY VACHAKAL
Address: - Balkrishana Niwas, Gawand Compound, Tembipada,
Bhandup (w) Mumbai 400078,
India
Contact No = 9967587845, 9323954717
Email = bhalchandra.vachakal AT ril.com , info_bhal AT yahoo.com
Possition Applied :- Piping Designer

OBJECTIVES:
It is my desire to work with company which can help me grow professionally as well as on the personal front along with the grow of the company.

SUMMARY:
With more than 9 years good experience in designing and review of designs on Oil & Gas, Petrochemical, projects. Using application of PDS / AutoCAD/ SPR / Microstation / 2D / 3D

*WORKING SKILL*
- 3D Modeling of piping as per P&ID, Intergraph PDS Intergraph Ver. 8.0,
- Equipment modeling as per Vender Drawing
- Supporty Modeling,
- Isometric Extraction,
- MTO Preparation with help of P&ID and Plot Plan,
- Columan, Exchanger and compressor Piping
- Plot Plan Devlopment.
- Rack Piping
- Piping Clash & Review in SPR
EDUCATIONAL PROFILE:
Mechanical Draftsman from Industrial Institute, Thane. India.
Piping Draftsman from Akar Institute, Mumbai, India
Certificate Course in AutoCAD in Aug.1999 from Zaknet Institute, Mumbai. India
H.S.C. March 1997
S.S.C. March 1995

COMPUTER AIDED DESIGN & SOFTWARE:-
Intergraph : - PDS Ver. 8.0 (Good Experience)
Bentley : - Microstation’SE / J,
AutoDesk :- Auto Cad 2007
Smart Plant Review :- SPR

COMPUTER SKILL:
Win‘98. WinNT.
MS Office”, XP, Internet.

WORK EXPERIENCE:-
Name Of Company From To Total Position
Chemtex Global Engg. Feb 2009 Till Date Piping Designer
Becrel Engineering Pvt. Ltd. Feb 2008 Jan 2009 1. yrs Piping Designer
SP Consultant Services July. 2004 Feb 2008 3.7 yrs Piping Designer
Reliable Consultant Services Dec. 2002 July. 2004 1.7 yrs Piping Designer
Reliance Petro Chemical Sep. 2001 Dec. 2002 1.4 yrs Piping D’Man
CAD Solution Dec. 1999 Sep. 2001 1.9 yrs Cad Operator

Detail Of Work Experience:-

1) CHEMTEX GLOBEL ENGENEERS PVT. LTD. MUMBAI
Designation: - Piping Designer
CLIENT – ABB (ITALY)
PROJECT – Potassium Naitrate Crystallization Plant KN03 (ABB08) CHILE
JOB PROFILE:-
- Experience in equipment and piping layout including support selection and 3D PDS.
- Experience in coordination with clients and other engineering departments for the design.
- Pump and Exchanger Piping Designing, Pipe Rack Piping Designing.
- Check & Review Clashes, and clear all clashes in clash report
- Designing of Supports with the help of Support Standards using Piping and Equipment modeling.
- Isometric Extraction of using Isometric Drawing Manger
- Checking Isometric And MTO
- Place logical and physical support using Piping Equipment Model


2) BECREL ENGINERRING PVT. LTD. MUMBAI
( Reliance Petro Chemical and Bechtel Engg. Pvt. Ltd. Joint venture )
The venture carries out the different design conditions for the worlds largest grass root refinery in Jamnagar i.e., Jamnagar Export Refinery Project (JERP).
Designation: - Piping Designer
Project: - Jamnagar Export Refinery Project
JOB PROFILE:-
- Piping Modeling of Big bore & Small bore lines with the help of P & ID’s using PDS.
- Modeling of Major Equipments like Compressors, Heat Exchangers, Columns, Spherical Tank, Pumps etc. as per vendor drawing using Equipment modeling.
- Carrying out the Batch Extraction for the lines.
- Designing of Supports with the help of Support Standards using Piping and Equipment modeling.
- Isometric checking (Bill of material, Piping routing, P&ID/GAD, Support arrangement, Flow direction,)
- Coordinates(N,S,EL.), Piping Specifications, Location of Vent & Drains at appropriate locations, Accessibility)
- Check & Review Clashes in Smart Plant Review. (SPR)
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.


3) M/s. SP CONSULTANT SERVICES, MUMBAI.
Designation: Piping Designer
CLIENT – Reliance Petro Chemical
PROJECT – Jamnagar Export Refinery Project
JOB PROFILE:-
- Equipment and Piping Modeling as per Piping Layout, Equipment Layout & P&ID
- Isometric Extraction of using Isometric Drawing Manger
- Nozzle orientation as per the convenience of routing.
- Checking Isometric And MTO
- Place logical and physical support using Piping Equipment Model
- Preparation of Piping layout.
- Preparation of GA Drawing.

4) RELIABLE CONSULTANT SERVICES, MUMBAI.
Designation: - Piping Designer
JOB PROFILE:-
- Drafting of Piping Layout, Isometrics and Equipment
- Proficient in preparing isometrics with MTO.
- Preparation of Isometrics.
- Help to Preparation Plot Plan Development.
- Draw Isometric , Pipe and Fitting Material Take Off

5) RELIANCE PETRO CHEMICAL LTD, MUMBAI
Designation: Piping D’Man
JOB PROFILE:-
- Preparing Isometric drawing with MTO
- Familiar in developing plot plan, equipment layouts & piping layout.
- Well versed in P & ID’S, other department drawings like equipment G.A.D Hook up etc.
- Knowledge of commonly used material in piping as per ASTM STD

6) CAD SOLUTION, THANE.
Designation: Designer / CAD / Microstation Operator
- Prepared Assembly & details drawings for dies, Tools & Machine Parts.
- Modification & Development drawing of dies, Tools & Machine Parts on exciting machine
- Reporting to Technical Office Manager.

*WORKING SKILL*
- Complete piping study with plot plan with P&I D’s.
- Modeling Equipment as per vendor document.
- Routing Piping as per given P&ID.
- Modeling control valve stations, PSV’s, Flow elements etc. as required.
- Modeling Slope lines as per process requirement.
- Modeling required Piping Supports for critical lines.
- Updating stress comments in model.
- Modeling Structures & platforms for equipment and valve access.
- Modeling the access way to access the required stations and equipments.
- Modeling Pressure & Temperature instruments as per instrument hook-ups.
- Co-ordinate with other area members for Iso Interface checking.
- Checking clashes in model through Smart Plant Review clear and correct in Model.
- Extracting Isometric drawings and checking PDS Iso errors.
- Checking extracted isometrics with P&Ids and Checking MTO and commodity code.
- Finalise the routing with lead engineer and checker.
- Updating the Vendor and Process comments in model.
- Issuing the IFC drawings and GAD’s, Nozzle orientation drawings.
- Reporting every week to Area lead.
- Co-ordinate with team members to achieve the target.
- Preparing presentation documents for model review.
- Platform, Ladder orientation.
- Attending Internal Model Review with all departments.
- Attending Model Review with client and incorporating their comments.
- Successfully completing area without any clarification.

PERSONAL BACKGROUND

PASSPORT NO : H2759463
Age : 28Yrs.
Date of Birth : 27 October 1979
Sex : Male
Martial Status : Married
Language Known : English, Hindi & Marathi.

I am a very hardworking, explorative and sincere person with a great desire to use my utmost potentials and prove them through my work.
Date :
Place : Mumbai ( Bhalchandra vachakal )