Vikas Engineering Associate Lucknow : AutoCAD, Control Panels Drawings, Electrical Engineer

[mskavi]

Vikas Engineering Associate Lucknow : Electrical Engineer

Designation: Electrical Engineer
Experience: 3 - 6 Years
Location: Lucknow

Job Description:
Candidate shall have to manage & keep carefully proper records / Engineering Documents project wise. To prepare Drawings of Control Circuits for LT Switch Boards & Control Panels Drawings including General Arrangement Single Line Diagram & Control & Schematic. If require, candidate shall have to visit project site

Desired Candidate Profile:
Candidate should be Graduate/ Diploma, should be fluent in English with good communication skills, should have thorough knowledge of Auto CAD,
Level of designation (Managerial/Non Managerial) : Managerial

Company Profile:
A leading manufacturer of LT Panels in India, Control & Power Equipments associated with PGCIL, NTPC, ISRO, NHPC, Nuclear Power Station, Bhabha Atomic Center, BHEL, L&T , Siemens, ABB Ltd, Crompton Greaves Ltd, Areva T & D Insia Ltd etc beside many other state Electricity Boards i.e. HPSEB, WBSEB, UPPTCL, KPTCL, NLC etc.

Email Address: vikasengineering@gmail.com, vikasengineering@rediffmail.com

Keywords: Electrical Engineer, Engineer, Control Panels Drawings, Auto CAD

[Guest-IJT]

Name : DHANASEKARAN
Email : dhanahythm AT gmail.com
Designation / Skillset : electrical maintainence

Resume :

CAREER OBJECTIVE :
To hold a responsible position in an organization where I can contribute positively to the attainment of its corporative objectives and grow along with it.
ACADEMIC DETAILS :
COURSE INSTITUTION UNIVERSITY/BOARD GRADE OF MARKS
B.E
( EEE )
V.M.K.V Engineering College, Salem.
Vinayaka Missions University, Salem, India.
74%
DEEE
Krishnaswamy Memorial Polytechnic College,Kumarapuram.
State Board Of Technical Education & Training
75%
(honours)
12th-STD
N.L.C Boy’s Higher Sec School, Neyveli.
State Board
60%
10th-STD
St.Joseph High School,
Neyveli.
State Board
77%

PROFICIENCY IN :
- Operating Systems : MS-DOS Windows 2000 ME, XP & Vista
- Software Packages : MS-Office, AUTO CAD
ACADEMIC INTEREST :
- Digital Electronics
- Electrical Machines & Power Distribution
PROJECTS DETAILS :
Diploma Project :
Title : PHASE SEQUANCE DECTECTOR CUM SINGLE PHASE PROTECTOR.
Synopsis : This project object cut the supply to the equipment if any of the phase is absent or if the phase are not in correct sequence using relay .
Engineering Project1 :
Title : WIRELESS DEVICE CONTROL THROUGH CELL PHONE
Synopsis : By using home appliances control by wireless protocol such as GSM which would be controlled by mobile phone by giving number command.

Engineering Project 2 :
Title : FLOATING BALLOON WIND POWER GENERATOR
Synopsis : This project object generate the power and provide the un interrupted supply to home . Using sources balloon wind , solar, and E.B supply.
ACADEMIC ACTIVITIES :
- Academic Trainings and Workshops :
- Participated in the RECENT TRENDS IN ENGINEERING PROJECT at V.M.K.V Engg college, Salem.
- Participated in the Paper Presentation at SSM College Of Engineering, Komarapalayam.
- Undergone training in Soft Skills Conducting by HP
EXTRA-CURRICULAR ACTIVITIES :
- Academic Societies :
- In-plant training at Ooty PUSHUP Power Scheme(hydro power plant), duration 5 Days.
- In-Plant training at Mettur, MTPS (Thermal power station)duration 5 days.

I hereby declare that all the details given above are true to the best of my knowledge and belief.
Yours faithfully,
Date :

Place: Cuddalore (DHANASEKARAN .T)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4188037
Date & Time : 29th May 2011 6:53 PM (UTC)
IP Address : 116.203.186.39
Browser Info : Mozilla/5.0 (Windows NT 6.1; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
Predicted Country : --

[Guest]

CURRICULAM VITAE
SHALYA PRATAP
Email : shalyapratap AT rediffmail.com , shalyapratap AT gmail.com
ELECTRICAL ENGINEER
To prove myself dedicated, worthy and energetic in a progressive organization that gives me scope to apply my knowledge and skills and be a member of a team, which dynamically works towards success and growth of the organization.
PROFESSIONAL EXPERIENCE
1 CADBURY INDIA LTD., BADDI (H.P) 6 months
WORK PROFILE
1 Successfully handled the entire spectrum of functions related to Project coordination for on shop floors & the utilities like Chiller, Boiler including the MCC panel commissioning and relay settings depending on load.
2 Looked after the 66KV substation consisting of C.T, P.T, breakers, relays etc and testing of H.T. cables.
3 Worked on 10MVA and 3MVA power transformers including its maintenance ,relay setting and testing.
4 Accountable for the installation of two 1450 KVA DG’s for the company including its commissioning and maintenance.
5 Analyzed the panel SLD and estimated the cable route as per the requirement.
6 Supervision of the cabling/supply for different motors of different ratings including the estimation of the correct cable size for the same.
7 Coordinated with Site personnel for effective implementation of Environment, Health & Safety measures without any shortfalls/lapses.
- ELECTRAPOWER (P) LTD., GREATER NOIDA(U.P) 1 year
WORK PROFILE
1 Accountable for coordinating and liaise all the project-related activities and the overall planning and control.
2 Responsible for maintaining the stringent level of quality standards set by the company through a thorough quality check. Executed cost saving and energy saving techniques/measures & modifications for substantial cost savings.
3 As per the site requirements, estimation of the cable route as well as the cable sizes.
4 Coordinated with Site personnel for effective implementation of Environment, Health & Safety measures without any shortfalls/lapse.
1 G.A DIGITAL WEB WORLD(P) LTD.(deployed in Electrical Inspectorate Office,Labor Department,Govt.of NCT, New Delhi ( STILL WORKING)
WORK PROFILE
1 Working as “ ELECTRICAL OVERSEER” and responsible for the inspection of all the electrical installations like H.T cables, transformers etc and installed electrical machines like electrical lifts etc. as per Central Electricity Regulations in the allotted division.
2 Responsible for giving NOC to various clients if the site finds to be working properly.
EDUCATIONAL CREDENTIALS
1 B. Tech (Electrical & Electronics), 2009 from Hindustan Institute of Technology, Greater Noida, Affiliated from U.P.T.U., Lucknow, 70.7.
2 AutoCAD (2d) from Cadd Centre, Noida
3 XII, 2005 from I.G.J. Government Inter College, Pasighat, C.B.S.E., 67.4%
4 X, 2003 from Kendriya Vidyalaya, Pasighat, C.B.S.E., 87.4%
COMPUTER PROFICIENCY
Operating System : Windows 98/XP/2000; Programming Languages: C ; Packages: MS Office, Internet Application
PROJECTS UNDERTAKEN
Power Distribution Control Over 4 Channels
TRAINING ATTENDED
1 month training on “Power Generation” at Tehri Hydro Development Corporation Limited, Rishikesh
ACADEMIC ACCOLADES
Distinction of receiving Top Position in Chemistry in B. Tech 1st Semester
Exhibited a working model on the topic Power in state level exhibition competition.
EXTRA CURRICULAR ACTIVITIES
Participated in a State Level School Exhibition
Achieved 1st prize in College Singing Competition

[Guest]

ASHISH KUMAR
E-MAIL : aish4jd AT rediffmail.com
aishonlyjd AT gmail.com
OBJECTIVE
Seeking a Challenging position in a growth oriented Organization, which offers diverse job responsibility utilizing my skills as a responsible motivator of successful Engineering teams.
STRENGTHS
- Good communication and interpersonal skills and able to communicate at all levels.
- Excellent written, verbal.analytical skills and computer proficiency.
- Good organizational skills and able to work independently with strong leadership qualities.
- Dynamic, Self-motivated, Resourceful individual having the drive to meet delivery targets.
- Ability to follow instructions, Hardworking, committed and Creative.
PROFESSIONAL SUMMARY

TRAINING :
- One Year Apprentice In Hindustan Aeronautics Limited, Accessories Division, Lucknow.
WORKING EXPERIENCE;
- Company : M/S Avadh Transformer PTV. LTD.
An ISO-9001 : 2000COMPANY, 3RD Floor, New Janpath Complex,9-A,Ashok Marg, hazratganj, Lucknow
[Transformer, TSS, SSP, SP Layout plan, and Arrangement Drawing’s] LOP, CSD, OHE WORK
(Railway project Group 141&142)
{Manufacturing of Transformer/Conductor etc.}
- Duration : 1st July 2008 To till date.
- Post Auto Cad Designer
All Mechanical and Electrical Drawing’s
{Present working Railway project}
Professional Qualification :
- Two Years Industrial Training In Draftsman Mechanical From Industrial Training Institute,Aliganj,Lucknow.
Academic Qualification
- Graduation : Bachelor Of Arts From Lucknow University.
- Intermediate : Intermediate From U.P. Board ( Maths group)
- High School : High School From U.P. Board ( SCIENCE STREAM)
Technical Skill :
- One year Advance Diploma In Computer application and Multimedia .
- Six Months Certificate Course In AutoCad Designing.
General
Physically sound, hard working and dedicated to the assigned job with an amicable and adjusting nature with good working sprit to achieve the goal.
Strengths :
- Decision Making
- Sincere & Hard working
- Building Long Lasting relations