Mahabal Enviro Engineers Ltd Bahrain, Doha, Dubai : Erection Engineer, fabricated steel structurem roofing, cladding

[mskavi]

Mahabal Enviro Engineers Pvt. Ltd Bahrain, Doha, Dubai/ UAE : Erection Engineer - Bharain & Doha
Website: http://www.mahabal.com

Keywords: site erection, pre - fabricated steel structurem roofing, cladding, insulated PUF building material

Designation: Erection Engineer - Bharain & Doha
Experience: 4 - 9 Years
Location: Bahrain, Doha, Dubai/ UAE
Compensation:
Rupees 3,00,000 - 6,00,000
Visa + Travel once/year + single bachelor accomodation FREE
Education:
UG - B.Tech/B.E. - Any Specialization, Civil, Mechanical,Diploma - Any Specialization
PG - Post Graduation Not Required
Industry Type: Construction/ Engineering/Cement/Metals
Functional Area: Site Engg., Project Management
Posted Date: 29 Jun 2009

Job Description:
Prefabricated Steel structure & standing seam, PUF insulated cladding, erection supervision of large span buildings and total site management

Desired Candidate Profile:
Diploma / BE Mech/Civil with steel fabrication, erection, structural site management, site correspondence, interaction with client

Company Profile:
small co. with 100 labour and INR Rs.15Cr turnover, permanent job in Abu Dhabi-Sharjah UAE / Baharin / Doha.

Executive Name: Mr. Raghunath Mahabal

Address:
Mahabal Enviro Engineers Pvt Ltd
15 Chandravijay Society, Near NKGSB Bank
Lokmanya Tilak Road, Near Railway Station
Mulund East
Mumbai,Maharashtra,INDIA 400081

Email Address: staff@mahabalenviro.com

Telephone: 91-22-21631573

Reference ID:
SITE

Keywords: site erection, pre - fabricated steel structurem roofing, cladding, insulated PUF building material

[shailesh jha]

Sir

I am an environmental engineering final year student requesting you to give me a proper detail if there is any vacancy for environmental freshet's is available.So please reply me as soon as possible so that i can be prepared for further step.
I’m looking for an opportunity to position my career in Environmental & renewable energy and its related areas. At present, I am doing internship in one of the reputed consultancy called ENVIRONMENTAL CARBON SOLUTION PVT LTD, DELHI, INDIA as a project leader. Project title "Solar city program in Agra city"

I’m keenly looking forward to work with an established firm, which will provide me equal opportunities of growth and challenges. With the support of my work experience and existing knowledge I assure you that I will work for the betterment of the organization as a whole.

Thank you

Regards
Shailesh kumar jha
Environmental Engineer
Final year
Hindustan college of science & technology- Mathura
Email ID jha.shailesh456 AT gmail.com
contact # +919411060493

[Guest-IJT]

Name : chittaranjan pradhan
Email : chittaranjanmech AT gmail.com
Designation / Skillset : assistant engineer
structural fabrication and erection engineer

Resume :

Professional profile
An enthusiastic and professional mechanical engineer, who enjoys being part of as well as leading a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initiative and can demonstrate the high levels of motivation required to meet the tightest of deadlines. Even under significant pressure, possesses a strong ability to perform effectively.
Educational Qualification :
- Board of secondary education, Orissa with 74.6 % in the year 1995..
- Council of Higher Secondary Education, Orissa(C.H.S.E.) with 59 % in the year 1997
Technical Qualification :
- Bachelor in Mechanical Engg. (Utkal University, Orissa) with 64.28 % in the year 2005.
- Diploma in Mechanical Engineering (S.C.T.E. & V.T., Orissa) with 71 % in the year 2000.
Work Experience :
1. Company - M/s. Gannon Dunkerley & Co., Ltd., CED - Kolkata, (A Leading Construction Company in India) at Indian Oil Corporation Limited refinery project, Paradeep, Orissa.
Position Held - “Engineer category - II” (Structural).
Duration - From February 2011 to till date.
Responsibility - Follow up Fabrication and erection work of structures for FOPS (Fuel Oil Pump Shed), Dearetor and Pipe Rack, STG building. Able to execute the project independently and able to co-ordinate with 2/3 sub-contractors and client’s engineers.
2. Company - M/s. Gannon Dunkerley & Co., Ltd., CED - Kolkata, (A Leading Construction Company in India) at Bhushan Steel & Strips Ltd., Meramandali, Dhenkanal, Orissa.
..
Position held - “Asst. Engineer” (Structural).
Duration - From February 2009 to January 2011.
Responsibility - Follow up the Fabrication & Erection work for structures like “covered shed for non-coking coal(DR) storage”, “Purchased DRI shed” etc. To ensure safety practice during working. Responsible to handle the execution of the work smoothly and meet all the dead lines.
3. Company - M/s. Diwakar engineering Pvt. Ltd., at Bhushan Power and Steel limited, Thelkoloi, Sambalpur, Orissa.
Position held - “Site Engineer”.
Duration - From July 2008 to January 2009
Responsibility - Follow up site supervision for fabrication and erection work for Boiler structures. Drawing interpretation, labor management and co-ordinate with client.
4. Company - M/s. BEWC at Jindal power limited (4 x 250 MW), Tammnar, Raigarh, Chhatishgarh
Position held - “Site Supervisor”.
Duration - From March 2007 to Jun 2008.
Responsibility - Site supervision, drawing detailing and interpretation for fabrication work of Duct line Boiler structure. Quality control and planning to meet clients demand. Ensure safety practice during working.

Declaration
I do hereby declare that, the above facts and evidences given by me in the above C.V. are true, complete and correct to the best of my knowledge and belief.
Date :
Place :
(chittaranjan Pradhan)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4365499
Date & Time : 13th Jul 2011 7:05 AM (UTC)
IP Address : 42.108.1.49
Browser Info : Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Maxthon; .NET CLR 1.1.4322; InfoPath.2)
Predicted Country ;: --

[Guest]

TAMAJIT ADITYA
Mechanical Engineer (Diploma)
Email Id : aditya.tamajit AT gmail.com
____________________________________________________________________________
Synopsis :
I have total experience of 1 year and 9 month in design, construction, insulation and operation, maintenance of water treatment plant gained from reputed companies. Have good knowledge in Autocad 2009 and other necessary computer software like MS Office.
- Currently designated as quality engineer for Lloyd Insulations (India) Limited.
- I have been associated with the operation and maintenance section of P.H.E.D as a Mechanical site Engineer.
- Had a very good exposure to the operation,maintenance of a water treatment plant.
- A keen learner holding Diploma in Mechanical Engineering from MALDA POLYTECHNIC, MALDA.
- A self-motivated hard working team player with good communication, analytical & problem solving skill. Have leadership skill especially suitable to handle the co-workers.
- Can work in any condition with highest degree of professionalism.
Working Experience :
Key Skills :
- Working in a complete project of building designing and insulation. Have worked extensively in the area of insulation.
- I have been responsible for all types of designing, preparation of general arrangement drawings, manufacturing drawing etc. Have excellent understanding about the real life implementation of the drawings.
- Have good knowledge in the maintenance and operation of the mechanical components used in water treatment plant and also have clear idea about the general machineries.
- Acquainted with the processes of an water treatment plant.

Project 2 :
Company LLOYD INSULATION (INDIA) LIMITED
Client Airport Authority of India Ltd.
Duration 1 year and 3 months and still working
Position Quality Engineer
Contribution As a member of insulation team working on construction and insulation of building and roof settings. Leading a team of workers for the same.
Details include : Extensive planning of the whole project as per the drawing & material supplied maintaining flow sheet.
Inspection & maintenance of overall quality & on time execution of the project.
Project 1 :
Company CONCORD ENGINEERING
Client PUBLIC HELTH ENGINEERING DEPARTMENT(W.B)
Duration 6 months
Position Mechanical site engineer
Contribution Has worked as mechanical site engineer in the operation and maintenance division of the plant. Got a very good exposure to the operation and maintenance of a water treatment plant.
Details include : Leading a team of 8 members as assistance site in charge in the site.
Looking after the overall production & smooth operation of the plant.
Education Details :
Exam. Passed Board/University Year of Passing Branch % of Marks
Mechanical Engineering (Diploma)

WBSCTE
College : MALDA POLYTECHNIC,malda

2010
Mechanical Engineering
72.3
Higher Secondary(Science)
WBCHSE
2007
Science
54.6
Secondary
WBBSE
2004
NA
57.25

Computer Knowledge :
- AUTOCAD 2009
- MS Office
- Internet