Power Linkers Mumbai : EHV HV & MV ITI Electrician Engineer

[mskavi]

Power Linkers Mumbai, Mumbai Suburbs : ITI Electrician/ Diploma Engineer
Website: http://www.powersystemconsultant.com

Keywords: ITI Electrician, Diploma Engineer, Field Testing - Commissioning, Condition Monitoring of EHV - HV & MV Electrical Power Equipments, Electrician, Mumbai

Designation: ITI Electrician/ Diploma Engineer
Experience: 2 - 7 Years
Location: Mumbai, Mumbai Suburbs
Compensation:
Commensurate with experience in any of the above field with benefit of PF, Leave & Bonus.
Education:
UG - Diploma - Electrical
PG - Post Graduation Not Required
Industry Type: Construction/ Engineering/Cement/Metals
Functional Area: Engineering Design, R&D
Posted Date: 27 Jun 2009

Job Description:

To work in following areas :

Field Testing - Commissioning, Condition Monitoring of EHV-HV and MV Electrical Power Equipments.

Desired Candidate Profile:

Specific experience in any one or two of the following areas :

1. Field Testing - Commissioning of EHV, HV & MV Equipments, various schemes and protection relays.
2. Panel Building, Panel Wiring & Control Circuit checking
3. Knowledge of Computers is Must.
4. Graduate Engineers shall not apply.
5. Candidate who have applied directly or through any other portal before, need not re-apply.
6. Candidates staying in Mumbai for more than 3 years shall apply.

Company Profile:
In business of Testing Commissioning since 1981. Working for all major Indian Corporates. Gulf Countries and far East Countries. For Power Plant, Cement Plants, Steel Plants, Copper and Aluminuium Metal Smelters. Leaders in Power System Analysis on ETAP Software, Power Plant Design Engineering, Field Testing - Commissioning, Condition Monitoring, Diagnostic Testing of EHV, HV and MV Electrical Power Equipments.

Address: 122, Nahar & Seth Estate,
Cardinal Gracious Road,
Near P & G Plaza, Chakala, Andheri (East),
Mumbai,Maharashtra,INDIA 4000 99

Email Address: hr@powerlinker.org

Telephone: Not Mentioned

Reference ID:
Reference : PSC/ ITI DIP JUL09

Keywords: ITI Electrician, Diploma Engineer, Field Testing - Commissioning, Condition Monitoring of EHV - HV & MV Electrical Power Equipments, Electrician, Mumbai

[Guest-IJT]

CURRICULAM VITAE

Permanent Address
Name: J.DAMODARAN No.344, 9th Street,
Sri Kamakoti Nagar,
Email: j_damu AT yahoo.co.in Pallikaranai,
Chennai. -600 100
Contact No : +91 9840925702 India

Personal profile
Date of Birth : 14.05.1967
Father’s Name : Mr.T.M.Jayaraman
Nationality : INDIAN
Gender : MALE
Marital Status : MARRIED
Driving Licence : DL.No. E/TN/002/001323/2005 (LMV)
Passport No : H 1806602

Academic Qualifications:
Bachelor of Mechanical Engineering, (Year 1992)
Dayananda Sagar College of Engineering, Bangalore University, India

Employment Profile
July,2008- till date Manager (Mechanical) EPC-Projects
M/s. Cedres Industries India Limited,
Chennai, India

May,2006- June,2008 Principal Engineer (Mechanical)
M/s. Rotary Mec Engineering (India) Limited,
Bangalore, India

Jan,1995- May,2006 Senior Engineer (Mechanical)
M/s.Techno Electric and Engineering Co. Ltd.,
Kolkata, India

Mar,1993- Dec,1994 Marketing Engineer
M/s. Miranda Cutting Tools,
Chennai., India

Aug,1992- Feb,1993 Production Engineer (Mechanical)
M/s.Network Services,
Bangalore, India

Brief career summary

Having hands on experience in the field of Storage facilities like Tank farm Unit which is a package unit associated with power plants at various locations. Exposure to the system packages comprising atmospheric tanks (both fixed and floating roof) , pumps, Underground / above ground and comprehensive LP/HP piping and insulation systems, Fabrication, Painting, testing and delivery for pressure vessels , Fire fighting equipments and the Electrical system , Civil and all associated instruments. Knowledge to review drawings like PFD, P&ID, GA, Isometric etc. Vendor selection and enquiries, Techno-commercial evaluation of offers, negotiations and purchase orders, Vendor drawing and document review.

Current responsibilities
The responsibilities will include, but not limited to:
Manage a mechanical engineering team to ensure appropriate quality and best practice
in Project engineering.
Maintains a cross functional relationship with each of the following.
Client specialist system engineers.
Other senior discipline engineers.
Senior draughts person.
Client representatives, all professionals, sub contractors, suppliers, officials
and any one involved in the project.
Tendering technical and commercial proposals for the new projects.
Reviewing and approving the deliverable documents such as specifications sheets, data
sheets, MTO and Drawings.
Coordinating with other related departments like process, piping, civil, electrical and
instrumentation.
Technical discussions with client for the close coordination of the project execution.

Experience in details
M/s. CEDRES INDUSTRIES INDIA PRIVATE LIMITED
Position : Manager (Mechanical) EPC-Projects
Duration : July 2008 to till date.

M/s.Cedres Industries India Private limited is a French based engineering and consultancy company conglomeration of 17 companies having our Indian office in Chennai and Head office from Lille, France. We are in to the field of Aerospace,automobiles,Agro & Food industries,Iron &steel,Oil & Gas, Precision machining,Pharmaceuticals etc.
Jobs & responsibilities
Business proposals and tender preparation.
Vendor enquiries and selection.
Plant layout study and generating piping drawings.
Follow up on out sourced manufacturing Items which is exported to France.

M/s. ROTARY MEC ENGINEERING (INDIA) LIMITED
Position : Principal Engineer (Mechanical)
Duration : May 2006 to June 2008.

M/s. Rotary Mec Engineering (India) Limited a leading Singapore based multi national engineering and consultancy organization having branch office at Bangalore in the field of Storage facilities like Tank farm Unit, Fire fighting system, Cross country pipe lines as an auxiliary systems for core sector industries like Power, Petrochemicals & Refineries.
Well experienced team of engineering professionals supported by reliable software and hardware systems.

Jobs & responsibilities

Participated in the Saudi Aramco tender proposals representing M/s Rotary Arabia.
Worked on the vendor selection & enquiries for the above project.
Drawing review on piping for the Synthomer project, Malaysia.
Basic engineering work on behalf of mechanical for the MOC project proposals.
Preparation of IFA documents like RFQ & data sheets for Pumps, Motors, Pressure vessels, Heat exchangers and packaged units like Fire fighting equipments and HVAC.
Pump vendor technical bid evaluation.
Maintaining a record of engineering document control list, CDDL, comments, review and compliance report.
Review of plot plan, equipment locations and floating IDC
Review of piping isometric drawings and MTO check w.r.t the PMS.

M/s. Techno Electric & Engg.Co.Ltd.)

Position : Senior Engineer (Projects)

Duration : January 1995 to May 2006 .
,,,
M/s. Techno Electric & Engg. Co. Ltd. a leading EPC contractor in the field of auxiliary systems and off-site facilities for core sector industries like Power, Petrochemicals & Refineries, etc. This company also closely integrated with leading consultants like CEA, TCE, DCL, EIL, Desein , MECON, Fichtener ,M.N.Dastur & Avant Garde

The company executing major orders from giants like NTPC, PGCIL, BHEL, MSEB,TNEB, Rolls Royce, NALCO, Lanco and AP TRANSCO.

Jobs & responsibilities

-Planning for overall project activities. i.e. budget & cost code, organization, schedule,
execution plan, manpower, equipment & tool, project material, construction material, etc.
- Execution project, controlling, monitoring and supervising as plan.
-Coordination with company 's Finance Department to prepare performance bond,
warrantee bond and all insurance required for project.
-Coordination with client and company engineering department for all design work,
check drawings to comply with scope of work.
-Preparation of procedures and specifications for execution such as material
specification, welding procedure, erection procedure, fabrication procedure,
painting procedure, etc.
-Kick off meeting with client and internal disciplines including all regular meetings.
-Field activity 's management and control.
Supervise by being involved to the field technical problems.
-Liaison with client for all project matters.
-Liaison with sub contractor / supplier both for local and abroad.
-Pre-Commissioning & commissioning assistance.
-Project hand over to client such as as-built drawing, mechanical completion,
provisional acceptance and final acceptance.
-Prepare internal construction report after project closing.
-Assisting new project proposals
M/s. Miranda Cutting Tools, CHENNAI (TN)

Position : Marketing Engineer
Duration : Mar-1993 to Dec-1994
Industry : TCT Tools and HSS Tools

Jobs & responsibilities

Marketing high speed tools and tungsten carbide tipped tools.

M/s. Network Services, BANGALORE (KARNATAKA
Position : Production Engineer
Duration : Aug-1992 to Feb-1993
Industry : Manufacturing of precision components

Jobs & responsibilities

Planning for the detailed work schedule after the drawing study.
Planning for material requirement.
Organizing the sequence of machining operations.
Planning for man power and man hour utilization.
Shift planning.
Safety and environmental monitoring.
Coordinating the flow of production, so that the production is on schedule and meet the specified quality.
Interact with design, purchase, planning and quality departments for better coordination on production.

In Techno-Commercial Coordination:
Tender proposals: submission, opening & attending clarification meetings -Engineering approval for data sheets-QP approval-Supply material inspection coordination-Generating QAC and Joint inspection report-Certificate of conformance.
In commercial: BG: Submission, Extension & closing-Billing break up approval-Supply follow up-Material dispatch clearance-Material receipt certificate-Invoicing- Follow up for both regular and escalation payments.

Achievements
Co-ordination with corporate management, process consultants and contractors during project
execution.
Vendor selection, negotiation, procurement and inspection of plant equipments and
machineries.
I was responsible for providing Technical assistance to management for optimization of system
operations.
De-bottlenecking, trouble-shooting and execute project expansion to Provide technical /
process inputs to Project and maintenance teams.
Sizing, selection, inspection, installation, testing and commissioning of process plant
equipments.
Technical Support to the production and Engineering teams.
Study the technical proposals of the vendors and implementation.
Co-ordination with corporate management, process consultants and contractors during project
execution.
Assisting in cost estimation and procurement of project equipments and package units.

Place: Chennai Yours faithfully

Date: (J.Damodaran)