Hyundai Engineering & Construction Co Saudi Arabia : Electrical Procurement Quality Engineer

[mskavi]

Hyundai Engineering & Construction Co. LTD Saudi Arabia : Electrical Procurement Quality Engineer –Hyundai
Website: http://www.dss-hr.com

Keywords: Electrical Procurement Quality Engineer

Designation: Electrical Procurement Quality Engineer –Hyundai
Experience: 7 - 12 Years
Location: Saudi Arabia
Compensation:
Good Salary as per experience, qualification & as per Interview result
Education:
UG - B.Tech/B.E. - Electrical, Mechanical,Diploma - Electrical, Mechanical
PG - Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Site Engg., Project Management
Posted Date: 25 Jun 2009

Job Description:

Required to work as Elec. Procurement Quality Engineer at the project site in Saudi Arabia. URGENTLY FORWARD DETAILED CV, ACADEMIC, EXP CERTS & PHOTO BY E-MAIL OR COURIER.

Desired Candidate Profile:

B.E (Mech/Elect), with min 7 yrs exp in static, Rotating EQ & Vendor Inspection. Gulf exp preferred but not mandatory. Good English & PC. Passport holder. AGE 30 - 45. Willing to join immediately.

Company Profile:
Hyundai is known the world over for erection & commissioning of Oil / Gas / Petrochem / Refinery projects. Present site is a very large 'Gas To Liquid' project site in Saudi Arabia.

Executive Name: Col. Rehni

Address:
Dynamic Staffing Services Pvt Ltd
E-40/7
Okhla Industrial Area
Phase ? II
Delhi,Delhi,INDIA 110020

Email Address: dss-job5@dss-hr.com, dss-job7@dss-hr.com

Telephone: 91-11-40410000

Reference ID:
Elect Procre Qlity Engr / Hyundai S. Arabia / Rehni

Keywords: Electrical Procurement Quality Engineer

[jahangir_x]

NAME : Md.Jahangir Alam
COMPANY : Arabtec Construction L.L.C. Dubai (UAE)
POSITION : Sr. Draughtsman
E-MAIL ADDRESS : jahangir_x AT yahoo.com
mdjahangir80 AT gmail.com

MOBILE NUMBER : 00971502421248
NATIONALITY : Indian
PASSPORT DETAIL : Date of Expiry – 07– 07–2016
Place of Issue – Muscat (Oman)
Passport No – F6582333
TOTAL EXPERIENCE : Total work Experience 8 years (Eight year), 4 years (Four years) in GCC. & 4 years (Four years) in India, in the field of High rise Towers, Airport, Substations, & Residential Buildings with Excellent working knowledge of Structural, Civil, Architectural & MEP Drawing Drafting & Assist to junior Draughtsman
PROFILE : Organized and Result Oriented Sr. Draughtsman with
8 Years Experience. Well versed in various Construction activities Excellent Communication and Problem Solving Skill. Familiar with Technical Co-ordination with Engineers & Consultants
EDUCATION : Diploma in Civil Engineering
Karnataka University, India – 2001
10+2 from Bihar Intermediate Education

Council, Patna, India – 1997
COMPUTER LITERACY : Auto Cad (Up to Date Version)
MS Windows (Word, Excel, etc)
Primavera – P3
LANGUAGE SPOKEN : English, Arabic, Hindi, Urdu

EMPLOYMENT Presently working for one of the prestigious project in EXPERIENCE Dubai. Infinity Tower at Dubai Marina 73 story
Residential tower rotating at 90 degree
1.) ARABTEC CONSTRUCTION LLC DUBAI UAE (28TH MARCH 2007 TO PRESENT)

POSITION : Sr. Draughtsman
I) PROJECT : Infinity Tower (6B+GR. & MAZZ. +6 Podiums + 73 Floors)
Dubai Marina Dubai, UAE
Contractor : Arabtec Construction LLC
Client : Cayan Investment & Development
Consultant : Khatib & Alami

PERIOD : 15th Dec. 2008 to Present
II) PROJECT : Dubai Sports City, Multipurpose Stadium S-4
Dubai, UAE
Contractor : AMB-JV (Arabtec/Max-Bogl)
Client : Dubai Sports City
Consultant : SCHUSTER PECHTOLD

PERIOD : 1st March 2008 to 14th Dec. 2008

III) PROJECT : Dubai World Central International Airport
Air Traffic Control Tower &
Passenger Terminal Building (Only Structural)
Dubai, UAE
Contractor : AMB-JV (Arabtec/Max-Bogl)
Client : Department of Civil Aviation
Consultant : adpi/Dar-Al-Handassah

PERIOD : 28th March 2007 to 29th Feb. 2008

JOB RESPONSIBILITIES
FOR ALL PROJECTS
Review and coordinates All Contract Drawings before
Execution of work and checking the Discrepancies
in Drawings for prepare shop drawing

Preparation of Architectural, Civil, Structural Shop
Drawing, General arrangement, Detail Drawings
As per project Requirements & submit for
Consultant approval
Co-ordination and discuss with consultant for any
Technical Clarification & Modification of
Drawings in all discipline.

Raised R.F.I. & S.C.R. to Submit Consultant
for Technical Clarification.

Co-ordinate & assist to Jr.Draughtsman for prepare
the Drawings

Preparation & Submission of as built drawing
According to actual site measurements.

Co-ordinate with Project Manager, Technical
Manager & Construction Manager

2) MODERN CONTRACTING COMPANY OMAN (4TH NOV. 2004 TO 10TH OCT. 2006)

POSITION : Technical Coordinator cum Draughtsman

PROJECT : Mirbat 5-Star Hotel Tourist Resort
5-Star Hotel, 4 Story Hotel Building, With 250 Rooms &
24 Suits, Total Area 64000 meters square
Contractor : Modern Contracting Co.
Client : Dhofar Tourism S.A.O.G. &
Golden Tulip Hotel Group
Consultant : Parsons International LLC.

JOB RESPONSIBILITIES
Review and coordinates All Contract Drawings before
Execution of work and checking the Discrepancies
in Drawings for prepare shop drawing

Preparation of Architectural, Civil, Structural Shop
Drawing, General arrangement, Detail Drawings
as per project Requirements & submit for
Consultant approval

Site visiting for technical guidance and Coordinate
With site team, to resolve problems.

Co-ordination and discuss with consultant for
any Technical Clarification & Modification of
Drawings in all discipline.

Preparation & Submission of as built drawing
According to actual site measurements.

Co-ordinate with Project Manager, Technical
Manager & Construction Manager

3) ARCHOHM CONSULTS PVT LTD NEW DELHI, INDIA (14TH JUNE 2004 TO 23RD AUG. 2006)

POSITION : Draughtsman cum Site Supervisor

JOB RESPONSIBILITIES
Site Visit, Inspection & Supervision
Preparation of Concept Design drawings with
Architect.

Preparation of General Arrangement, Working &
Detail Drawings Independently
Coordinates with Contractors
Coordinates with Clients

4) HABITATE ARCHITECT PVT. LTD NEW DELHI, INDIA (15TH JULY 2001 TO 30TH AUG. 2006)

POSITION : Draughtsman cum Site Supervisor
JOB RESPONSIBILITIES
Site Visit, Inspection & Supervision

Preparation of Concept Architectural Design
Drawings with Architect.

Preparation of General Arrangement, Working &
Detail Drawings Independently

Coordinates with Contractors

TRAINING PROGRAMS
SEMINARS AND
WORKSHOP : Attended many programs on personality
development like communication skills, effective
public speaking, Safety management &
time management, etc.
Internal Auditor and Trainer for training programme
Of staff and technicians.
EXPECTED SALARY : Negotiable
Availability : One Month

Mohammad Jahangir Alam

[Guest]

i am electrical engineer. i have 7 years exp. 5 years in India and 2 years in KSA.

[moulana]

Curriculum Vitae
SHAIK MOULANA SHABUDDIN
B.E in Mechanical Engineer.
Curriculam Vitae :
Site Superintendent Mechanical Engineer & Project Management---Oil, Gas &Power in Simple Cycle and Combined Cycle Power Plants
Senior Mechanical Engineer-----Oil, Gas & Power in Combined Cycle Power Plants
Saudi Arabia. India.
Phone :
Mobile :
E-mail :
Postal
Address :
+966-1-2766655 (Ext. 532)
+966-547600580
shabuddin AT altoukhi.com shabbushaik AT yahoo.com
Power Plant Division
Generation Department,
Al Toukhi Company for Industry, Trading & Contracting,
P.O. Box 497, Riyadh–11411, Kingdom of Saudi Arabia. NIL
+918832439436
shabbushaik AT yahoo.com
S/o sk.Jan Saida
House no :4-340/2, Navabharath nager, Bommuru post,
Rajahmundry Rural,
East godavari district,
Andhra Pradesh, India
Pin :533126
PERSONAL INFORMATIONS :

PROFESSIONAL QUALIFICATION :
PROFESSIONAL COURSES :
PROFESSIONAL EXPERIENCE
INDUSTRY TYPE
EXPERIENCE
CLASSIFICATION
JOB FUNCTION :
OIL &GAS PIPE CONSTRUCTION&OPERATION ENGINEER
COMMISSIONING
ENGINEER
DESIGN
ENGINEER
PROCUREMENT &TENDER ENGINEER
SUMMARY :



SOFTWARE
SKILL :
LANGUAGES KNOWN :

Father’s Name : Shaik Jan Saida
Sex : Male
Marital Status : Married
Nationality : Indian
DOB : 13 July, Nineteen Seventy six
Passport Details : Passport No.-E8725329.
Place of Issue - Visakhapatnam, Andhra Pradesh, India
Eqama No. : 2212316034
Bachelor of Engineer from Gulbarga university, Karnataka, India.
- Institution
- Discipline
- Academic year
- Percentage occurred

: Veerasaiva Vidyavarthaka Engineering College, Bellary.
: Mechanical Engineering
:2000
:65%
Sl No. Courses Done Name of the Institute Certificate No. Date of Issue
1 Gas Turbine and Combined Cycle Power Plant Nevyeli, National Power Training Institute)
Tamilnadu, India. Npti/000656 22 jan.2002
2 Pipe Welding Inspection Technology Pune, Maharashtra Aws/Cwi/C81P21 26th jan.2008
Worked in ABB 8C GT & Alstom steam turbine 800mw Combined Cycle Power Plant (India) consists of HRSG (horizontal Gas flow with natural circulation type arrangement)and HP and LP pressure of STG.
Worked as Asst Site manager ,Mechanical Site Construction Engineer, Design engineer, procurement engineer in :
GE FRAME 7FA* 4 in 450MW FARAS Power Plant Extension(SEC-EOA),
GEFRAME 7FA* 4 in 450MW PP8 Power Plant Extension(SEC-COA),
GE frame 7EA in Tihama Unit 10 &11 in 150MW (SEC-WOA)
GE Frame 6BRafha Power plant Extension(SEC-EOA) and
Oil, Gas & combined Cycle Power.
10 Years of Experience
7
1
1
1
Mechanical Engineer with hands on work experience in the Middle East and India. Majority of Experience falls within the Design, Procurement, piping Construction in gas Turbine and Combined Cycle Power Plants.

Responsibilities:
COMBINED POWER PLANT EXPERIENCE IN INDIA FROM 2001 AUGUST TO 2004 SEPTEMBER
- WORKED FOR ABB FRAME 8C OF 6(no)x 50MW TURBINE AND ALSTOM STEAM TURBINE IN JEGURUPADU 800MW COMBINED CYCLE POWER PROJECT, AP, INDIA.(PHASE1+PHASE2)
- 2001 to 2005 worked in Mechanical Site engineer, Design & Operations site engineer in 800mw GVK combined cycle power plant.
Heat recovery steam Generator:
HRSG (horizontal Gas flow with natural circulation type arrangement),with HP steam outlet 60kg/sec with pressure 56 bar and LP Steam Outlet 14.70 kg/sec with pressure 3.8 bar, hence with Output Power77MW.
Worked, familiar with following systems:
- HRSG Start ups, 24” Condenser Cooling water Pipe line system with cooling Tower fans (Paharpur), Cycle make up pumps for maintaining the daerator level.
- Daerator: Normal Operating Pressure:2.2 to 2.8 Bar. and temperature 160 DEG C., Condensate Extraction Pumps trips at trips at Daerator Level 1800mm and Normal Make up in between 1485-1525mm.
High Pressure Boiler Feed pumps: which feeds feed water to boiler, Capacity is 122m3/hr and minimum capacity 25m3/hr, Suction/discharge pressure 5/96 bar, Motor Details:500KW/50 Amps/6.6 KV and with minimum flow recirculation valve.
Start Permissive: Daerator level should be greater than 950mm for start up of HPBFP.
- Familiar with HP ,LP feed water Control Valve, HP ,LP superheater vent MOV
LP,HP DRUM Vent Motorised Operated valves, LP Extraction MOV
Worked familiar with HP START UP BY PASS, HP TURBINE INTEGRAL BYPASS MOV.
High pressure shut off valve to Turbine MOV.
Low pressure shut –off valve to Turbine MOV module.
HP desh CV upstream and Downstream valves.
Blow down Tank Inlet Isolation valve
Low pressure boiler Feed pumps: Capacity is 155m3/hr, Minimum capacity 50 m3/hr,Suction/discharge Pressure 5/20 bar. and motor details:132KW/222 Amps
Diverter Damper System: Hydraulic Tank levels, function and Damper Opening Conditions as per HRSG BOILER protections.
HP, LP STEAM HEADER CLEAN BLOW OUT.
STEAM TURBINE GENERATOR :
If Cold start up turning gear should be in service at least 2hrs.
If Hot start up HP Inlet Temperature and sealing steam temperature must not be
Colder than 50 deg.C
Condenser Cooling water system: which circulates water from condenser to cooling tower through Cooling water Pumps in Auto mode.
Condenser Tube Cleaning system: cleanse the condenser tubes through Basket Strainer system
Auxiliary Cooling water system is supplied from Main Cooling water system through Debris filter .Debris Filter consists of Self cleaning Strainer, rotation, flushing pump. Debris filter goes to Backwash on AUTO whenever DP across filter increases to 75mBar.
Closed Cooling water system for HRSG Damper hydraulic Circuit and SWAS sample coolers.
Liquid ring Vaccum Pumps: Maintaining Vaccum in Condenser for removal of non-condensible gases.
Gland steam System: HP, LP Turbines have 2 sets of seals inner and outer,Inner Seals are maintained at high pressure 0.2 bar during Start up by admission pressure by HP steam through Gland steam shut-off valve and 0.3 bar during operation by dump CV.
Lube oil system: 2x100% AC Driven lube oil pumps and DC lube oil Pumps, which feeds to HP & LP Turbine bearings and reduction gearbox.
HEAT RECOVERY STEAM GENERATOR HYDRO TEST:
ENSURANCE OF CPH CIRCUIT FILLING,LP ECONOMIZER CIRCUIT FILLING,HP/LP ECONOMIZER CIRCUIT FILLING,HP/LP SUPERHEATER &EVAPORATOR CIRCUIT FILLING
Ensurance close of Transmitter and Drum level indicators
Start the Hydro Test pump with recirculation valve open, Start pressurizing HP drum gradually with an increment of 1.0 bar and observe the pressure at pump discharge and at HP Drum carefully.
Thoroughly check safety valves for any passing and other valves for any leaks during Pressurization. After HP drum reaches to 80 bar. hold the pressure for 15 minutes,and check for leaks.If pressure is holding ,depressurize hp drum GRADUALLY TO ZERO.
FAMILIAR WITH FOLLOWING COMBINED CYCLE SYSTEMS:
- Raw water system, clarified water system and Cooling water system,
- firewater system, pre-treatment plant, and pre-treatment chlorination,
- potable water chlorination, Effluent treatment plant, oily water separation system, heating Ventilation Air Conditioning system.
FAMILIAR WITH CIVIL:
Construction of Dyke walls, Gas turbine foundation and supporting system lean concrete and Concrete foundations
Duct Bank, sleepers, Pipe trenches, pipe racks and switchgear Building.
Fencing, Concrete Pavments and Roads
Crane Installation on Gantry Structure.
Power house Building.
FAMILIAR WITH ELECTRICAL:
Transformer installation 110MVA,13.8kv Medium voltage
Generator Circuit BreakerABB,SIEMENS
220kv Switchgear
MV &LV switchgear panels ABB,SIEMENS,SCHNEIDER (installation)
PIPING DESIGN,CONSTRUCTION & PROCUREMENT FOR FARAS OPEN CYCLE POWERPLANT AND OTHER VARIOUS POWER PLANTS IN SAUDI ARABIA FROM DECEMBER 2004 TO TILL DATE:
Design Experience:
Review of Design Basis Report for Piping Drawings
Approvals of Fuel Gas and BOP piping Layout Drawings, Equipment Lay out and Isometric drawings
Review all vendor documentation to assure the Compliance with design and Technical requirements.
Material ordering as Per Material Take-off., follow-up and Site Co-ordination
INSTALLATION OF GAS TURBINE AND STEAM TURBINE:
1.Installation of anchor Bolts for GAS TURBINE FOUNDATION as per GE or ABB manufacturer Drawings
2.Grouting Generator and Turbine centre line support Blocks Pockets as per exhaust stack and cenre line axis., Clearance Gap Check for concreting the foundation
3. Installation, testing and Commissioning of Gas Turbine Generator and other Supporting systems
fuel oil Treatment system(Alfa laval, West falia), fuel filter skids,
Air compressor system,(atlas copco, ingersoll)
Cooling water system
Air intake system (Donaldson)
Exhaust stack (Bachmann, American Air Filter, Braden)
Fin Fan cooler
Fuel Oil Tank Erection
Construction Experience as Asst Site Manager(in charge) in:
NATURAL FUEL GAS SYSTEM
- 24” Main Fuel gas API 5L GRADE X-52 Header pipeline Tapping point with Existing ARAMCO Natural Gas header for the New 600MWPower plant
- 24” Main Fuel Gas ASTM A106 GRADE B Header Pipeline from Inlet Valve Skid to Gas turbine including all equipment connection through Emergency valve Shut down Station, Inlet Filter Separator, Scrubber, Metering Streams ,Fuel gas compression plant with special pipe Supports, Absolute separator, oil bath heater, Scrubber upto GT End connection.
- Gas condensate collecting tank interconnection piping, Flare system etc..,
- Pipe cleaning, Pneumatic Pressure test, Hydro test for all Fuel gas Piping.
- Post Weld Heat Treatment for Fuel Gas Piping Welds (pipe Work, header, Flange Joint) by Electric resistance Method in form of ceramic Heater Pads.
- PWHT Range as per ANSI b31.3 not exceeding 177 deg c/hr, hold at 610 c/hr for one per inch of thickness, Cool to 315 deg.c at a rate not exceeding 200 Deg c/hr, final hardness check.
- All Fuel Gas pipe welding with Shielded Metal Arc welding process (SMAW).
- Atlas Copco centrifugal Fuel Gas Compressors without put of 40 bar, erection execution, oil bath heater Commissioning
COOLING WATER SYSTEM FOR ALL 4 GAS TURBINE UNITS:
- Fabrication, Installation OF 14’’ ASTM A 106 GRADE B Supply and Return header
Piping from pump skid to lube oil heat exchanger, hydrogen coolers, LCI Cooler, Fin
Fan Cooler, Fuel gas compressors.
- Demineralised water piping makeup connections to Expansion tank, Chemical Dosing
piping, drain piping connection to Waste water system.
- Cooling water flushing spool connections at all heat Exchangers.
- X-RAY, cleaning of pipe, Repair Weld after NDT Test.
- Cleaning, Hydro test of Pipe Lines.
- Cooling water Chemical flushing Passivation procedure with NALCO before
normalisation, Start up of GT.
- All Cooling water pipe welding is Shielded metal Arc Welding Process(SMAW).
LUBE OIL PIPING SYSTEM FOR ALL 4 GAS TURBINE UNITS:
- 4’’, 6’’ STAINLESS STEELTP 312 TP 304L Lube oil piping Connection to Bearings, Bearing Headers in Turbine, Generator Compartment, interconnection piping, Hydraulic, seal oil piping, valve connections, Auxiliary, Emergency oil pump discharge piping inside GAS TURBINE.
- All Lube oil Pipe Welding with Gas Tungsten Arc Welding Process (GTAW).
- Cleaning, Hydro test with 1.5 times the design pressure.
INSTRUMENT AIR AND SERVICE AIR PIPING FOR BOP AND POWER ISLAND:
- 4’’, 2’’, 1’’ GALVANIZE PIPE A53 GRADE B ERW.
- Tapping point PIPING Connection with Existing Faras Power Plant.
- Compressor House piping (8 bar) includes compressor outlet piping, Dryer receiving interconnection piping.
- Header, distribution piping with Isolation valves to all Consumer connections.
- Cleaning, Hydro test as per SEC Standards.
- All piping with Threading SCREWED Ends, with Jute, loctite as bonding material.
- Pipe Air Blowing, Hydro test as per SEC standards.
FIRE FIGHTING SYSTEM:
- A106 GRADE B Cement lined+Galvanize External Piping
- Complete mechanical fire fighting system, complete ring header for new power plant expansion
- Fire Water pump house with hydropnuematic Tank with Hydrant and spray header connection with interconnection NRV.
- 8 BAR HVW AND MVW SPRAY SYSTEM
- Hydrant pump, Spray pump, Diesel engine Driven pump, jockey pump, air compressor with HP TANK PIPING.
- New Fire Hydrant piping interconnection with existing Headers, Foam Tank, Skid piping.
- Worked with Fire Fighting suppliers are CHEMTRON, SAUDI PAN GULF, GROUP4 NESMA, AL BILAD, FIRE FREEZE.
- Process used for this piping is Root Pass with 6013 and 7018 electrode with hot pass and capping pass.
DEMENERALISED WATER, WATER WASH SYSTEM:
- A312 TP304 L Schedule 40 used for demineralised water.
- Zamil Stainless steel tanks are used for Demineralised Water Tanks.
- Demineralised Water Piping from DM plant to DM storage Tanks.
- DM water make up to all Consumer Connections to water bath heater, Hydrogen Generation area, Cooling Water modules.
- Water Wash pump discharge piping to GT COMPRESSOR OFFLINE,ONLINE CONNECTIONS
- Cleaning, Hydro test with 1.5 times of Design Pressure.
NITROGEN PURGE SYSTEM AND LP CO2 FIRE FIGHTING SYSTEM
- Nitrogen Gas piping to all Fuel Gas consumer Connections Pressure Reducing Station, Water Bath heater, Scrubber, metering section and other related equipment,
4”2”LP CO2 GALVANIZE SEAMLESS SCH 80 WITH CLASS 3000 FITTINGS
USED IN THIS SYSTEM
- Piping from nitrogen generator to GT Accessory module, Generator module, with Isolation Valve.
- Soap leak Test, Hydro test as per SEC Standards.
Experience in Saudi Arabia as Construction piping Engineer, piping design engineer, Procurement engineer, and project coordinator:
- PIPING DESIGN REVIEWS WITH CLIENT (SEC) AND CONSULTANT (POYRY, L&T), FINALISING GENERAL ARRNAGEMENT, ISOMETRIC DRAWINGS FOR PIPING.
- PROJECT COORDINATOR FOR FARAS POWER PLANT HANDLING SHIPPINGS OF SUPPLIER DANGEROUS GOODS, DIRECT DELIVERY GOODS AND OTHER EQUIPMENT.
- WORKED FOR RAFHA EXPANSION 60 MW OF GE FRAME 6B in 2004(SEC-EOA) WORKED FOR ARAR EXPANSION 150 MW OF GE FRAME 7E in 2005(SEC-EOA) WORKED FOR TIHAMA UNIT 10,11,OF 150MW GE FRAME 7EA in 2007(SEC-SOA).
- WORKED FOR TIHAMA UNIT 10&11EXPANSION 150 MW OF GE FRAME 6B
- WORKED FOR RIYADH PP8 EXTENSION 600 MWGE FRAME 7FA in 2008(SEC-COA).
- WORKING FOR FARAS EXTENSION 600MW in 2008(SEC-EOA).
In saudi Arabia i handled GE FRAME 7FA TURBINE power plant co-coordinating with all site engineers, sub-contractors and following with
American safety Procedures in scaffolding, Risk Plan Procedures
Quality control procedures in piping, heavy structure construction
familiar with Single cycle and combined cycle supporting systems.
control of Construction budgeting, procurement follow up, site construction Plan,allotment/Distribution of work to Engineers.
Distribution/follow up of Commissioning Team to finalise the Tasks.
Timely Completion of Project with following up with Grass root of Technicians, oreman, supervisors, site engineers, subcontractors, Equipment suppliers
in Civil, mechanical, Electrical, Instrumentation and commissioning
Monitoring of all Site activities in civil , mechanical, electrical and analyzing the percentage of work/day and advising/finalization that job to be completed in next day.

MS-Word, MS-Excel.
English, Urdu, Hindi, Telugu, Kannada, Arabic.(speaking)

[Guest]

sir,
I am lijo,I working last is HHI qatar- gtl project,,my designation is team leader mechanical errection &instalisation team.my duty is equipment errection and alligement.now i need a good job -mechanical division inside,can u help me,sir?

[Guest]

CURRICULAM VITAE

SURESH A. NAIR
E mail sureshappukuttan AT sify.com ,sureshappukuttan AT gmail.com
Qualification : B.E. (CIVIL) - 1982 from REC Surat (NIT)
Professional Experience : 25 years
April 2010 to Till date TRIDEM PORT AND POWER PLANT
Working as G.M ( civil) for 750MW Thermal power plant and Port construction at Nagapattinam. Interacting with soil investigation agencies, power plant consultants and port consultants. Review of DPR for power plant and coal berth for Port construction. Interacting with environmental consultants and assisting in land acquisition works
June 2007 to Till March 2010 MANTECH CONSULTANTS-CHENNAI
Consultancy for Minjur 100 MLD Reverse osmosis desalination plant . Monitoring progress & quality for sea-water pump house, water retaining structures,equipment foundations, RO building structural works,Roads
January 2006 to May 2007 FICHTNER CONSULTANTS
Project management consultancy for CPCL 5.8 MGD Desalination plant. Supervision, quality control for all the civil and structural works for sea water intake pipe jetty,water treatment plant, Reverse osmosis plant
February 2002 to October 2005
Name of the project
Responsibilities as owners
Engineer :
ELECTROWATT CONSULTANTS [OMAN]
CIVIL ENGINEER (Resident engineer)
200 MW SALALAH POWER STATION, DESALINATION PLANT FOR MINISTRY OF ELECTRICITY AND WATER
Planning ,supervision & quantity survey of all civil and structural activities of heavy equipment foundations, substations including control and switchgear buildings, switchyard, pump house, workshop and roads in accordance with quality action plan & latest B.S. Codes. Approval of bought out items and enforcement of safety standards
March 98 to Jan 2002 : MANTECH CONSULTANTS
CHIEF ENGINEER ( CIVIL)
Duration : April 1999 to January 2002
Name of the project : 330 MW PPN Power Company - CCPP
Responsibilities as Owner’s
Engineer : Planning, supervision of all civil & structural activities of the project in accordance with quality action plan & latest IS codes such as the Soil Investigation, Surveying, Piling, Pile Testing, T.G. Building, GTG & STG Foundation, HRSG, Chimney, Naphtha storage Tank, Switchyard, Non-Plant Buildings like Administrative Building, Housing Colony, Approval for bought out items. Enforcement of Safety Standards.

August 1996 to February 1998 FICHTNER CONSULTING ENGINEER (I) PVT.LTD
Name of the post DEPUTY CHIEF ENGINEER
Duration August 1996 to February 1998
Name of the Project : 2x23 MW CAPTIVE POWER PLANT FOR LARSEN AND TOUBRO CEMENT PLANT AT AWARPUR
Responsibilities as Owner’s : Engineer Planning, supervision, & Billing of all Civil &Structural Works in accordance with latest Codes for 2x23MW captive power plant.
Works Consists of the following
1. T.G. Building
2. G.T. Foundation
3. Cooling Tower
4. Boiler foundation
5. Switchyard
6. Control room
April 1985 to August 1996 : DEVELOPMENT CONSULTANTS LTD. CALCUTTA
Name of the post : ASST RESIDENT ENGINEER, RESIDENT ENGINEER
Duration : April 1985 to February 1992
Project worked : 720 MW CPP of NALCO at Angul ( Orissa )
Responsibilities as Owner’s : Engineer Planning, supervision, & Billing for all the Civil & structural works
1. 120 MW x 6 TG Foundation
2. Cooling Towers
3. Cooling Water Pump House
4. Ash Disposal System
5. Chimney
6. Switchgear Room
7. Intake Structures
8. Ash Pond
9. Coal handling Towers
Duration : March 1992 to August 1996
Project worked 2 x 235 MW Atomic Power Plant of NPC at Kaiga.
Responsibilities as Consultants Engineer Quality Control of all the Civil works & field Engineering services in liason with design office for the following structures.
1. T.G. Building
2. STG Foundation
3. D.G. Buildings
4. Spent fuel storage building
5. Reactors
6. Reactor Auxiliary Building
7. Switchgear room
8. Service Building
9. Control Room
10. Cooling water intake structure
11. Cooling Water Pump house
12. Fire water Pump house
13. Safety related Pump House
14. Chimney
August’1983 to March 1985
FACT ENGINEERING & DESIGN ORGANISATION
Name of Post SENIOR CONSTRUCTION ENGINEER
Project worked : 2 x 1350 MTPD Ammonia Plant for KRIBHCO at Surat
Responsibilities as Owner’s : Engineer Planning, Execution & Billing of all Civil works connected with Ammonia Plant
1. Compressor House
2. Various Equipment Foundation
3. Switchyard Control Room
4. Roads
April 1982 to August 1983 : ANIL CONSTRUCTION COMPANY, SURAT
Name of the post : SITE ENGINEER
Project worked: Housing Project

[Guest]

Dear Sir/ Madam,
May I ask for a short background of HHIA's 150 MW Tihama Power Projects in the 3 places at Easter Province of Saudi Arabia- This is to have a better understanding of your up coming projects.
Please send your prompt response to my email address at yac_768 AT yahoo.com .
Thank you,