ASHIRVAD PIPES PVT LTD Bangalore : Injection Moulding machine Incharge

[mskavi]

ASHIRVAD PIPES PVT LTD Bengaluru/Bangalore : Incharge – Injection Moulding Division

Keywords: injection moulding

Designation: Incharge – Injection Moulding Division
Experience: 8 - 10 Years
Location: Bengaluru/Bangalore
Education:
UG - B.Tech/B.E. - Mechanical,Diploma - Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Chemicals/ PetroChemical/Plastic/Rubber
Functional Area: Other
Posted Date: 24 Jun 2009

Job Description:

8-10 years experience in Injection Mould department having thorough knowledge in handling injection moulding machine process, production planning, manpower allotment, process parameter optimization, new mould trials. Maintenance of injection moulding machines and moulds. Should have work experience of ISO 9001:2000 systems and managerial capacity.

Desired Candidate Profile:

8-10 years experience in Injection Mould department having thorough knowledge in handling injection moulding machine process, production planning, manpower allotment, process parameter optimization, new mould trials. Maintenance of injection moulding machines and moulds. Should have work experience of ISO 9001:2000 systems and managerial capacity.

The desired candidate should be a Diploma or BE in mechanical with CIPET is an additional advantage

Company Profile:
Innovator and pioneer of PVC pipes for nearly three decades, Ashirvad has emerged as leaders in the column pipes (for submersible pumps) over the years. An ISO 9001:2000 company, Ashirvad now joins the select band of “LUBRIZOL’S” franchisees’ across the world plans to recruit manpower at strategic locations in the country mentioned below to manufacture “FlowguardTM CPVC Plumbing piping Systems also being manufactured at our Bangalore plant.

Executive Name: Nandhini

Address:
Not Mentioned

Email Address: jobs_ashirvad107@yahoo.in

Telephone: +9127820664

Keywords: injection moulding

[Guest]

SHARATH BABU.M
Email Id : Sharath_babuji1 AT yahoo.com
Objective
To be innovative and cognitive by exploring new heights in Software development and soar to great altitudes by devoting myself to the organization.

Academic Qualification
B.E.(MECH) JAYAM COLLEGE OF ENGG & TECH - DHARMAPURI Anna University 2005 67
H.S.C MUNICIAPL HIGHER SECONDARY SCHOOL STATE BOARD 2001 53
S.S.L.C ANDAVAR MATRICULATION SCHOOL MATRCULATION BOARD 1998 59


Working Experience
§ Worked as Production In Charge & Production Engineer in GEECO ENERCON Pvt Ltd in Trichy as production of Air-Preheater and 3 Years Exp.
§ Worked as Quality Engineer in Suresh Gears as sub- contract of LMW Coimbatore.
Areas of Interest

§ Production Department.

§ Automobile Engineering.

Training / Field Visits / Camps

ü Undergone Field visit in HMT- Kerala.

Projects Done

ü Cycle Time Reduction in 500Mwe COAL VALVE ASSEMBLY in BHEL, Trichy.

Technical Skills/Languages known

Operating Systems Known : MS-Dos, Windows 98, 2000, and XP
Software’s known : Auto Cad 2000, CATIA V5.

[Guest]

Curriculum – Vitae
Dinesh pandya
Dare7070 AT rediffmail.com
OBJECTIVE :
To get right break where I can use my knowledge, experience and new challenge every day. By
working in professionally managed company I want to boost my career prospects.
Work Experience :
Present :
Organisation
Designation
Since
Company profile :
Fancy Fitting ltd is an ISO 9001 :2000 certified company with Injection moulding facility
manufacturing parts of luggage accessories and Other customers are IKEA,VIP,metal toys
& own product of hanger.
Job Profile :
Responsible for driving the organisation towards achieving the goals by
executing the target driven plans inclined with Team building for manufacturing good quality and
cost effective products.
Focus Areas :
Customer Interactions.
Customer Quality and Delivery
New business Development.
Implementation of Quality Management System.
Reduction of Manufacturing Cost.
Inventory Control & Material reconcilation.
Recruitments.
Training to the employee.
Permissible Purchases.
Safe & Hygenic work atmosphere.

Energy Conservation
Previous :
:
:
:
Fancy Fitting Ltd.
Plant Head(factory manager)
23rd june 2006
Organisation
Designation
Since
Company Profile :
Banglore sales corporation is a manufacturing Handle bar switches,Brake switches for Two
wheeler and Three wheelers.MIL also exports Two wheeler switches.
Job Profile :
-
Planning the shift activities to achieve the production targets.
-
Monitoring the process to reduce the scrap / rejection.
-
Allocation of resources like material manpower with respect to production plan.
-
Co-ordination with maintenance department in carrying out preventive and break down
maintenance.
-
Tackling with customers to understand quality issues.
-
Planning and verification of corrective and preventive actions to be taken.
-
Active praticipation in problem solving activities.
-
Interaction with other departments likes quality assurance, maintenance, material and
logistics and tool room.
-
Ensures that safety norms are being followed in shop floor.
Banglore sales corporation
Member-Moulding
18th Aug 2003 to 23rd June 2006.
Additional responsibilities : As a New Product Co-ordinator
-
Review of new product development and status
-
Production planning and coordination of new products
Previous :
Organisation
Designation
Since
Fancy fittin limited ( DAMAN )
Associate Member (TEAM LEADER)
22 Apr- 1998 – 18th Aug 2003
:
Prayaga industries limited
Production officer
11th july 1997 – 21 Apr 1998
Previous :
Organisation
Designation
Since

Naval tecnoplast limited
Shift incharge
11th Nov - 1993 – 10th July 1997
Strengths :
-
Machine series from 500T to 2000 T, L & T machines 60 T to 250 T and Cincinnati
Milacron machine of 400 T,50T&85T of Battnefield.
- Knowledge of materials like PP,ABS,NYLON,DELRIN,PC,PCABS.
- Exposure to QS – 9000,TS And ISO14000 systems in production.
- Knowledge in machine installation from 60 T to 2700 T.
Training Undergone :
Training on injection Moulding Machines and Process by GM, Battenfeld, Germany.
Training on Design of Experiments.
Training on Poka-Yoke (Mistake – Proofing Technique).
Training on Awarness of TS / ISO14001 / TS -16949 & ISO 9001 :2000
Training on Kaizen by Kaizen consultants & Gemba Kaizen.
Training on 5S.
Projects & Achievement :
a) Developed Visual inspection & acceptance standards for Export components.
b) Reduced the Mould setup time from 27 mins to 9.9 mins. ( availability increased from
86% to 93%)
c) Productivity improvement by 33%
d) Cost reduction by defect elemination and scrap control.
e) Implementation of Part and Runner seperators.
f)
Implementation of Hot sprues in Moulds to increase the yield.
g) Implementation of Visual control systems.
Education Profile
-
B.Sc with Chemistry, Botany.
(66%) (1993 )
P.G. Diploma in plastic processing technology from central institute of plastic
engineering & technology (C.I.P.E.T.)

[Guest]

any vacancy for plastic engineer?

[Guest]

E-Mail :-krishansharda05 AT ymail.com
KRISHAN KUMAR
(Currently Working with jsk international pvt Ltd)
CAREER OBJECTIVE

Result-oriented Professional seeking opportunity to contribute problem solving and technical know-how with management skills to acquire a challenging full time position with a growth oriented organization and establish a career in the advanced field of development.
Personal Traits :I assess myself As sincere, hard-working and straight forward person who is ready to accept challenges and ups and down in life. I am an innovative person who is always eager to learn and explore from anyone .I believe in teamwork and adapt to any environment with ease.
Area Of Interest : Production Planning
: Process Control
: Troubleshooting
: Six Month Diploma in Computers.
PROFESSIONAL EXPERIENCE (FIVE YEARS)

MAY- 06 to TILL NOW : Five Years
Other Organization Profile : 0ne year experience M/s Time Technoplast Ltd as a quality Engineer in Injection moulding plant.
:Three year Experience in Astral Polytechnik Ltd., Baddi.as production engg.

Designation : Production Engg.
Job Description : All production related activities, such as production planning, process and Troubleshooting.
: My duty is monitor the whole process & try to minimize the cycle time.
: Participated in other engineer development such as guage and fixture.
: Co-ordination with other production related department such as quality Assurance & production designs.
Machine Handling : Electronica (145 Ton), L& T (85 to 150 Ton), Haitian (150 to 200) farromatic Milacom (125 to 475 Ton) Hishiya.

Academic Qualification
- B.Sc (PCM) from CCS University Meerut (U.P) in 2004.
Technical Qualification
- Post Graduate Diploma in Plastic Processing Technology (PGD-PPT) from Central Institute of Plastic Engineering and Technology (CIPET) Amritsar (Punjab) in 2006.

[Guest]

sir, i am amit kumar, i am studying in cipet mysore, my course is post diploma in plastics technology. I was working in gplast pvt ltd coimbatore. Sir if any vacancy in your company plz reply me.

[Guest]

RESUME
Sunil Kumar Behera
Email-sunilbehra1981 AT yahoo.com

Career Aspiration
Desire to work in a company that uses my knowledge, talent, hard work, dedication and
sincerity in a well manner. I am looking for the great opportunity as a production
engineer that offers me challenging assignments, professional development and career
growth.
SUMMARY
About 7 years experience in injection molding maintance, processing different kind of material.
EDUCATION
1. Bachelor of science (B.Sc) conducted by bhanja Bihar University (Berhampur) Orissa in 2002.
2. Post graduate Diploma in plastic processing and testing from(CIPET) Ahmadabad 2004.
COMPUTER SKILL
Basic knowledge of Ms office and internet.
EMPLOYMENT
Current working as injection molding production engineer at tanpicks industries, Tanzania, East Africa from April 2010 to april 2011.
Tanpicks industries ltd manufacturing of Tooth picks products, household articles and drinking straws.
MJM BROTHERS LTD.TANZANIA (EAST AFRICA)
Production engineer -from 2007 to 2009.
Company profile
Mjm Brothers is market leader of electrical items and fashion items.manfacturing over 100 items. Company has 8 injection molding.
The products are manufacturing from polypropylene, ABS,HDPE,PP,SAN,LDPE,PS.
Plastic items- Round box 1 way, 2 way, 3 way, 4 way,round box,connector,square box,curtain ring, elbow, helmet, hair cutter, afro comb, etc.
SURELOCK PLASTICS PVT LTD.MUMBAI
Shift engineer - from April 2006 to sept 2007.
Company profile
Surelock plastic is biggest market leader of various size cable ties and household articles company has 6 injection molding. The items are manufacturing from PP, NYLON, and ABS.
MANIKA MOULDS PVT LTD. SILVASSA.
Shift engineer- production and quality engineer from April 2004 to March 2006
It is market leader of different size of battery container and household article .it is supplied to Tudor India ltd, Exide, luminous etc.
MATERIAL PROCESSED
PE, PP, ABS. HIPS, PS, PVC, NYLON, PET and PC.
MACHINE HANDLED
WINDSOR-300T, L & T -300T, SUPERMAX-600 T.
AKAR-500T, CSD-600T, CSD-300T,JT-300T & 200 Tons.
JOB PRIFILE
1. Machine job setting and start up production as per planning
2. Prepare daily mould change schedule according to production planning.
3. Preparation of monthly production report and product effiency.
4. By controlling wastage, monitoring energy consumption & reduction cost at all levels.
5. Preparation of product wise planning.
6. By upgrading the technology and training the manpower.
7. Reducing the machine breakdown time.
8. Establishing the production target machine wise and monitoring the output.
9. Trails of new mold and preparing the process data sheet.
10. Problem analysis and trouble shooting.
11. Preparation of daily production report and entry software copy.
12. Monthly performance review meeting report preparation.
13. Planning & development or implementation of operation as well as the system according in the shop floor.
14. Maintain all documents of iso 9001 and 9002.
15. Organizing daily work at shop floor.
16. Checking machines daily.
17. Conducting continue improvement project.
18. Handling skilled manpower and admistration of shop floor.
19. Development of operator through multi skill.
20. Planning day to day production to achieve maximum production.
21. Arranging, repairing and maintain tools.
22. Record preparation of tool history.

[Unregistered]

My name Karthik. I have finished my sslc & I am doing my BA in corres. Do you have any job in your company in Bangalore