www.kbk-chem.com Engineering Pvt Ltd Pune : Electrical Instrumentation Design Engineer

[mskavi]

KBK Chem-Engineering Pvt Ltd Pune : SENIOR ENGINEER- Engineering & Design-Electrical & Instrumentation

Designation: SENIOR ENGINEER- Engineering & Design-Electrical & Instrumentation
Experience: 4 - 5 Years
Location: Pune

Job Description:
Prepare Technical Specifications of Electrical Items like PCC/MCC Panels, Switch gears, Power cables and its BOQ etc. Should also handle vendor, contractor selection. Should have experience in costing/budgeting, electrical trouble shooting at site.

Desired Candidate Profile:
BE. Electrical / Electrical / Instrumentation.
Value engg .and experience with HT System will be an advantage. Should have good communication skills and software knowledge to the discipline

Company Profile:
KBK Chem – Engineering Private Limited (a group company of Shree Renuka Sugars Ltd) is in the business of undertaking Turnkey Projects, encompassing feasibility study, engineering design & development of process plant, erection & commissioning.

Email Address: Pallavi.raskar@kbk-chem.com
Website: www.kbk-chem.com

Keywords: Engineering & Design - Electrical & Instrumentation

[Guest-IJT]

Dear Sir,

Please find attached copy my updated cv for Design & Development (Tansmission/Driveline).

If you have any urgent opening mathing with my job profile,please mail or contact me on mobile.
Thanks & Regards,
PRAKASH WAJE
9822112455
HARDY SPICER ,NASIK

MR. PRAKASH K WAJE
Permanent Address:
‘ASARA’ PLOT NO.A.S.M.-51,ASHWIN NAGAR,CIDCO,NASIK-422009
Email ID: anil_mech64 AT sify.com
Mobile: 09822112455



Objective:

Seeking a position as a Senior Design Engineer with a leading organisation where extensive experience will be further developed and utilised in the area of Product design and development

Apercu:

- Over 3 years experience in Product Development, Design Engineering, Product Data Management, Prototype Development activities, Product Testing.
- Currently designated as Design Engineer with HARDY SPICER, NASIK.
- Proficient in spearheading R&D initiatives, design, testing and validation and systems designing initiatives.
- Competent in Design and development activities for Propeller Shaft (Forging & Casting Components) in Automotive and Industrial Application involving modification/ up-gradation of existing designs of Propeller Shaft, detailing using Software Tools like IDEAS NX8,Autocad, BILL OF MATERIAL Professional and Selection of propeller shaft based on Design Torque ,B10 LIFE ,CRITICAL SPEED calculations & Technical Input given by customer.
- Developing additional technical skills i.e. ERP, MEDUSA software linking with PSI PENTA.
- Possess strong understanding of the logic of engineering drawings & principles & resourceful in preparation of technical documents Engineering Release & Engineering Change Issues.

Professional Skill:

Have an experience of working on the CATIA V5, IDEAS as a design module and PLM (Team center engineering)

Company profile:

Hardy Spicer Ltd., Hindustan Hardy Spicer Ltd (Formely known as XLO-GWB Cardan Shafts Ltd.) has been promoted by XLO India Ltd. & Gelenkwellenbau, Germany. Hardy Spicer manufacturing Propeller shaft and its related component and supplying to Eicher Motor Ltd., Ashok Leyland ltd, Swaraj Mazda Ltd, Bajaj Auto Ltd., Tractor & Farm Equipment ltd.Hardy Spicer also exporting propeller shaft to Border Holding, UK, New Holland, Germany, Belgium.
AREAS OF EXPERTISE:

Project Management & Product Development
- Co-ordination in preparation and finalisation project plans/schedules, engineering designs / drawings and technical specifications for Automotive Propeller Shaft & components Design for Domestic & International Clients.
- Coordinating with customers, understanding their technical requirements and co-ordination with internal depts. for developing of blueprints: finalising specifications, designing, prototype development and testing.
- Facilitating new product development initiatives with key focus on QCD (Quality, Control & Delivery); Technical Documentation such as DFMEA.
- Modifying /upgrading existing designs and generating associative drawings with IDEAS & AUTOCAD.

Testing & Inspection
- Evaluating the developed components/products through Testing and Inspection.
- Developing components as per the predefined specifications; undertaking testing / inspection, identifying area of improvement in terms of quality and value engineering & making relevant modifications.
- Coordinating functional and reliability tests on various product samples and initiating relevant action for enhancing functions of the product.

Product Data Management
- Product Data (CAD) Generation and Structuring for downstream areas.
- Bill of Material for Marketing Dept.(quotation purpose) , purchase Dept. for daily transaction of material & for Production planning for manufacturing & assembly.

Projects Handled:

Projects based on Automotive Applications:

- Propeller Shaft for Eicher Motor (4x4 application)
- Front propeller shaft with Center Bearing
- Rear propeller shaft with Flange Yoke. Stub ball yoke, slip stub shaft, sleeve yoke with Design calculation.

- Double Cardan Shaft for DANA INDIA (Tractor Application)

- Double Cardan Forging, Half Shaft Forging, Sun Gear Forging, Journal forging design & Develop for manufacturing.

- Propeller Shaft with Splined Sleeve (Two piece construction) for Merlo.Italy.

- Double Cardan Shaft for TAFE (Tractor Application)


Projects based on Industrial Applications:

- Saj-Froude Test Plant P Ltd for paper mill application
- SAIL (Steel Authority of India Limited) for Rolling mill application
- ONGC
- Rourkela Steel Plant (RSP) for rolling mill application
- Pari Robotics for Car parking project
- VRDE,AHAMADNAGAR (4X4 APPLICATION)

ACADEMIC CREDENTIALS:
- B.E. (Mechanical) from N.D.M.V.P.S. College of Engineering (Pune University), Nasik in 2006. (Secured First Class with 65.3% marks)
- Diploma in Mechanical Engineering from K.K.Wagh College of Polytechnic, Nasik in 2003.
(Secured 1st Division with 72.56 % Marks)

PERSONAL DETAILS:
Father’s Name : Mr. K. M. Waje
Date of Birth : 15th Feb. 1985
Nationality : Indian
Language known : English, Hindi, Marathi.
Hobby : Playing Cricket & Badminton
Current CTC : 2.2 L\Annum
Expected CTC : Negotiable
Professional References: Mr.M.M.Shahane (GM-Engg., HARDY SPICER,NASIK)
Mr.V.R.Kokate (Head of Design Dept, PMA AUTOMOTIVE(P) LTD
Mob: 9850959074
E-mail ID : anil_mech64 AT sify.com

Declaration:

I hereby declare that all information furnished above is true to the Best of my knowledge and belief.

Date:

Place: (Prakash K. Waje)

[Guest]

Snehal Manohar Phirke
BE-INSTRUMENTATION (2010, University North Maharashtra)
E-mail ID : snehphirke AT gmail.com

Career Objective
Work with committed and dedicated people. Contribute towards continuous growth and development of self and corporation.
Personal Summary
I am an ambitious, confident & enthusiastic person, not getting easily daunted by my surrounding. With my sincerity & hard work I am sure I can make all my dreams come true.
Educational Qualifications- :
University/ Board Exam
Passed Year of
Passing Marks %
North Maharashtra BE May 2010 69.20%
North Maharashtra TE May 2009 64.87%
North Maharashtra SE May 2008 53.87%
North Maharashtra FE May 2007 62.86%
HSC board, Maharashtra HSC Feb-2006 73.66%
SSC Board, Maharashtra SSC Mar-2004 80.66%
Technical Skills
- Successfully Completed Certificate course in “MATLAB”
- Successfully Completed course in “PLC”
- Successfully Completed course in AUTO-CAD 2006.
- Knowledge of CMS Office, MS Excel etc.
- Knowledge of e-plan ,ERP etc.

Experience (11 months)

Company Name : Oneness Control Panels Pvt.Ltd
Designation : Project Engineer.
Duration : Juley 2010 to till date.
Role :- Oneness Control Panels Pvt.Ltd located at Dhayari,Pune
Manufacture all Type of Control Panels
PCC,MCC, VFD ,MIMIC ,Desk & Junction BOXES.

Oneness basically Deals with
Tetra Pak (I) Ltd.
Alfa Laval (I)Ltd.
Forbes marshall Ltd.
Praj Industries Ltd.
Ziemann (I) Ltd.
.
As a Project Engg.
Resposiblites are as Followed :-

Prepration of G.A Drawing by AUTOCAD from Customer SLD & Technical Aspects.
Taking Customer Approval for all Project Related Drg.
Prepration of Electrical wiring drg. Related to that Project by Eplan Software.
After final Approval from Customer arrange for Fabrication,
Prepration of BOM, and Quality documents related to Projects.
After Production work Testing of Whole panels with respect. To BOM, & wiring Drawing.
Project details & Co-Curricular Activities at college

Project name :- “STERILIZATION PROCESS BY USING PLC”
Sterilization process is used to sterilize the surgical Equipment such as
Needles, seizers etc.it is very time consuming and hectic process. we have Carried out automation for this process by controlling the parameter like
Temperature and pressure.
Seminar Topic : - “HONEYPOT”
Honeypot it is an security resource whose value lies in being
Probed attack or compromised. It is a specially equipped system deployed
By security professionals to lure crackers and track every move of theirs.
Extra-Curricular Activities
Industrial Training :- Thermal Power Station, Bhusawal.
Industrial Visit :- Ever Blue pvt Ltd ,
Raymond

[Guest]

I need engineering jobs.