Maharaja Whiteline Appliances Ltd Baddi : Plastic Injection Moulding Production Manager

[mskavi]

Maharaja Whiteline Appliances Ltd. Baddi : Production Manager

Designation: Production Manager
Experience: 10 - 15 Years
Location: Baddi

Job Description:
Experience in Production of Plastic injection Moulding.
Handling team of Exe.
Daily and monthly production planning of the machines considering minimum scrap and rejection.
. To ensure the maximum utilization of the machines.
. Co-ordination Dept.

Desired Candidate Profile:
Experience in Production of Plastic injection Moulding.
Handling team of Exe.
Daily and monthly production planning of the machines considering minimum scrap and rejection.
. To ensure the maximum utilization of the machines.
. Co-ordination Dept.

Company Profile:
Maharaja Appliances Ltd. is the No.1 Appliance company in India & is the leading manufacturer of kitchen and domestic appliances like Juicer mixer grinder, Food processor & Kettles along with Washing machines, Music systems & Home Theatres etc.

Email Address: careers_maharaja@yahoo.co.in

Keywords: production, moulding, injection

[nareshkumarsharma]

Curriculum Vitae

NARESH

E-Mail : maddy6962 AT yahoo.com

Sharmanonu38 AT yahoo.in

OBJECTIVE :-
To pursue a challenging position in a progressive organization, which best utilizes my analytical, interpersonal and manufacturing skills, with a potential for professional growth and development. My area of interests includes development, industry research in emerging technology areas.

PRESENT STATUS :-
Workingas an Production Engineer in M/s Punjab Telent Cable ltd.,Dera Basi. Punjab (INDIA).
Duration : - 23thjan 2005to till date

SUMMARY OF SKILLS & EXPERIENCE : -
I have started my career as a Production engineer in 2004 after completing my diploma in Plastic Technology and now i am working as a Production & maintanace Engineer , in a company having turnover 90 cr. I want to achieve further goals and targets what the management give to me as i have done in the past with my will power. I am interested in of management job in which i can utilize my knowledge, experience and skills to serve the company best and i am ready to immigrate in any part of the country including overseas.

JOB RESPONSIBILITIES :-
· Responsible for all production related activity like achieving daily targets, reducing rejection, increasing work efficiency, maintain record of daily production

* To maintain the Production sheet.
* Increase Productivity.
* Reduce cycle time
* Manpower handling.
* Check all the Process control for production.
* Successful trial of new mould.
* To removed trouble shooting on process.
* To make standard parameters for M/c. setting &set M/c. under Parameter.
* Maintain Production planning & control.
* Major role in preventive maintenance of mould, machine & utility.

·Handling All Kind Of BreakDowns.

Machine Handling :
Ø Windsor 650 T 850 T. & Omega 660 ton.
Material Handling : PPHP, PPCP, ABS, PC, L.D.P.E, H.D.P.E, PVC,

INDUSTRIAL TRAINING
1 : DIPLAST PLASTIC LTD. (INDIA)
Injection Molding (6 Month)
2 : KANDAHRI BEVERAGE LTD. (INDIA)
Quality Controller (2 Month)
3 : SUPER PIPE PVT. LTD. (INDIA)
Extrusion Molding (2 Month)

PROJECTS DONE IN JOB :-
· Nillkmal Platic chairs all models and other furnitures models

PROFESSIONAL QUALIFICATION :-
·Three year Diploma Course in Plastic Technology. From PunjabState Board of Technical

Education & Industrial Training from 2001-2004

ACADEMIC QUALIFICATION :-
·High School from PunjabSchool Education Board in 2000

STRENGTHS :-
·Grasp things very quickly
·Don’t give up easily
· Can work with different people as they will have different perspectives about projects
·I have leadership which I develop through effective communication, delegation and personal Interaction

PERSONAL DETAILS :-
Name - Naresh kumar
Father Name - Sh. Jaipal
Date of birth - 20th april 1985
Hobbies - Analyzing Myself, Listening Music & making new friends
Nationality - Unmarried
Language known - English, Hindi & Punjabi

PERMANENT ADDRESS :-
Vllage-Raillon,Post office- Nandpur Kalour, Distt.
Distt. Fathegarh Shaib.
State. Punjab

Date : Place: (Naresh kumar)

[Guest]

Sir,
I have 26 years experience in injection extrusion and blow mouldings.
I am working as plant manager for past 15 years.at present Iam in saudiarabia
in pvc ,cpvc fittings factory as plant manager.
I here by attach my resume for your kind persual.
thanks and raegrds.

P.PANNEER SELVAM
POSITION APPLIED FOR : PRODUCTION MANAGER/PLANT MANAGER
NATIONALITY : INDIAN
Key skills : MOTIVATOR AND GOOD LEADER,DISCIPLINED TRIER AND GO GETTER.
JOB OBJECTIVE : Production and Related Functions.
Total years of experience : 26 years.
Current Industry : UPVC ,CPVC FITTINGS AND PIPES MANUFACTURING.
PVC ,CPVC COMPOUNDS FOR PIPE AND PELLETIZER FOR
INJECTION MOULDING.
EDUCATION : B.sc applied mathematics (Three Years).
: Diploma in Plastic Mould Technology (Three Years).
: Post diploma in plastic mould design (One year).
INSTITUTION : CENTRAL INSTITUTE OF PLASTICS ENGINEERING TECHNOLOGY.
Summary of skills and Experience
*Experience in production ,mould design , mould making and compounding pelletizing.
*Machine setting of microprocessor based Injection moulding machines ,blow moulding and pipe extruder
*Indepth knowledge in all kind of plastic materials and processing equipments.
*knowledge of compounding mixer and pelletizer.
*Preventive maintenance of moulds and machines.
*Implementation of quality system in production area.
LANGUAGES KNOWN : ENGLISH ,ARABIC ,HINDI.
COMPUTER PROFICIENCY :
*Working knowledge in MS Office , Excel, Power point and Auto cad.
EXPERIENCE :
NOV 2005 TO TILL DATE ZENITH FITTINGS &PIPES MANUFACTURERS JEDDAH KSA.
( Company manufacturing Sch 80 PVC & CPVC Fitttings, Sch 40 PVC Fittings, Valves, DWV Fittings& CPVC Pipes).
Certified accredited by ANSI/ NSF-61, Aramco Ministry of health
Kingdom of Saudiarabia.
POSITION : PLANT MANAGER
*Responsible for entire production activities in the organization.
* Production planning
*Planning and executing of Maintenance activities.
*Analysis and corrective action for the production ,quality related complaints.
*Target implementation and achieve.
PRESENT SALARY : 6500 SR +Allowances
EXPECTED SALARY : 9000 SR +Allowances
JUNE 1996 TO 2004 AUGUST AL OBAID PLASTIC MANUFACTURERS LTD .RIYADH
LEADING FITTING S AND PIPE MANUFACTURERS IN KSA.
POSITION : PRODUCTION INCHARGE.
JOB PROFILE :
*Responsible for entire production and planning activities.
*Training programme for all the organization personnel.
*Design approval and trial approval.
*Dealing with customer complaints.
September 2004 to November 2005 AHIRVAD FLOW GUARD CPVC FITTINGS AND PIPES LTD
BANGALORE-INDIA.
POSITION :PRODUCTION MANAGER FITTINGS &PIPES.
JOB PROFILE : Responsible for entire production activities.
- Coordination of third party inspection .
- Procure machines and materials.
- Commissioning and machine erection.
- Mould trial and approval.
- Manpower recruitment.
- Motivating the marketing team
- Production costing and analysis.
June 1984 to may 1996 M.K ELECTRIC INDIA LTD.,
POSITION : Prodn supdt, vendor Development Manager.
Job Profile :
*Responsible for entire production and assembly of Polycarbonate Logic modular switches
Date : 10/02/2010
Place : Jeddah K.S.A. P.PANNEER SELVAM

[Guest]

Kaushal B. kansara
E-mail :- kaushalkansara2002 AT yahoo.com
Kaushalkansara069 AT gmail.com
CURRICULAM VITAE
Professional Objective :
To work in a challenging environment in which I can positively contribute towards the growth of the organization and grow as an individual.
Expertise :
Plastic Injection molding, Blow Molding, Roto molding, having exposure in Production, Maintenance, Development & Project work.
Present Employer : Enkay Plastics Ltd. (Gee Pee Group) - Nigeria
.
Designation : Manager (Operation)
Duration : From Dec.’10
Company Profile :
Company is having 25 units in Nigeria. . Company is engaged in the business of manufacturing Roto molding water tanks up to 10,000 ltrs. 25 Ltrs. To 1000 Ltrs. Blow molded drums, Aluminum sheets, PVC- (Pipes, Fittings, and Profiles), PET Bottles; Injection molded Household articles & toys etc.
Job Profile :
- Preparing Machine programmed, shift schedule for staff & work man, raw material / additives accessories arrangement and co-ordination.
- Achieve targeted production with effective management of Man, Machine, and Method & Material.
- Controlling on machine down time, process rejections, cycle time, material wastage & consumable also monitoring reground material, stock, receipt, issue & generation.
- Preparing & implementation of quality system procedure & work instruction & preparation of process specification after process qualification.
- Conducting trials of new moulds, materials, establish cycle time etc.
- Changed low morale team into highly motivated team through continually monitored training programs which helped to reduce the frequent turnover of the expert manpower.
- Reduced set up time by nearly 70% by using QCO (Quick change over methodology-SMED) which resulted in reducing the mold loading time from 8 hours to 3 hours and colour changing time from 2 hours to 35 min.
.
- Reviewing of non-conforming product & implementing corrective/preventive action & also prepare & implement prioritize reduction plan.
- Handling mould with Hot runner, Cold runner, Gas Injection with multiple core & Tooth Brush mould-Zauransky (Germany) etc.
- Process raw material like HIPS, GPPS, SAN, ABS, LURAN, PC, PC-PBT (XENOY), PC - ABS, Nylon, Delrin, PPCP, PMMA, LD, HD, Noryl & Filled PP.
- Handled IBC Line- Installation & Trial for New China Project.
PREVIOUS EMPLOYER :
Company : Time Technoplast Ltd.-Daman
Designation : Asst. Manager (Production)
Duration : June’07 to Dec.’10
Company :
An ISO-9001-2008, ISO-14001-2004, & TS-16949 certified Company. Company is a Leading Technology based polymer product company. Company is engaged in the business of manufacturing Industrial packaging, Lifestyle, automotive component, Healthcare product & Infrastructure / Construction related product. Also having Blow molding Machine building Unit.

Company is Manufacturing IBC collaboration with Mauser-Garmany, Plastic Returnable packaging (Small & large foldable container, pallets, crates etc.) collaboration with schoeller Arca system-Netherlands, High-tech composite cylinder (LPG/CNG) collaboration with Kompozit praha- Czech Republic
.
Time group is having seven Units of Injection & Blow molding in Daman & another Seventeen Units in different places in India also started Units in Abroad (Sarjah,Thailand,China,Bahrain, Igipt,Czech Republic & Poland)
Company : Coronet Product Pvt. Ltd. - Baroda
Designation : Manager (Molding)
Duration : March’05 to May’07
Company :
An ISO 9002 Company having four plants in one premises. Jewel brushes Pvt. Ltd; Unident brushes Ltd, Amigo brushes Pvt. Ltd & Coronet Product Pvt. Ltd. Coronet Plant is collaborated with Coronet Product-Germany.
Company is engaged in the business of manufacturing Injection molded Plastics component of Quality Tooth brushes, House hold & Oral care product. Company is manufacturing Tooth brushes for Hindustan Lever, Unilever & Sinpart-Garmany. Household products for IKEA, Coronet. & Export all Products in 45 Countries.
In house facilities of molding, Bristling, Sealing of brushes. Company is having 43 Injectionmoulding machines. Coronet plant is having 21 Injectionmoulding machines of Ferromatik Milacron, L&T Demag, Engel-Austria, Mafatlal Niigata & Dkv-Koria (Vertical Injectionmoulding M/C) ranging from 55Tons to 300Tons.
Company : Mutual Meca Plast Ltd.
Designation : Executive (Production)
Duration : Sep’96 to Feb’05
Company :
An ISO9002 & TS 16949 Certified company. The company is engaged in manufacturing of plastics molded component of automobiles, electronics & Home appliances for Tata motors, Mahindra & Mahindra, Fiat, Honda, General motors, Whirlpool, Western, Godrej, Symphony, Onida, Tcl, Vedeocon, Elgi, Reliance, E.C.I.L. etc.
Having 25 Injection molding m/cs of 100Tons to 3000Tons of Engel,Toshiba, Ferromatik Milacron,Windsor.

Having vibration welding, cubic & spray painting facility.
Having Gas injection unit from Gas injection Ltd.-U.K.
Having Tool manufacturing facility at Vasai-Mumbai & another molding facility at Pune.
Company : Jolly containers, Daman as a Sr.shift engineer (Production)
Duration : Sept’-95 to Aug’ 96
Company Profile : The Company is engaged in the business of manufacturing of plastics containers for paint industries like Nerolac paints, Asian paints etc. range from 1ltr to 22 ltr.
Company : Safari Industries India Ltd. Halol as a shift engineer.
Duration : Oct’-92 to Aug’-95
Company Profile : The Company is a well known leading manufacturer of luggage.

Education:
Computer Skill : M.S.OFFICE-2000 From Asset International,Valsad
INTERNET & SAP BASIC
Technical Qualification: PG Diploma in Plastic Processing Technology from
CIPET Ahmedabad in 1992 with Second class,B
Grade (60% - 80%).

Academic Qualification: B.Sc. (Physics) from North Gujarat University in 1990
Faculty in Technical Institute of Polymer science-Time Technoplast Ltd.-Daman
Professional Membership:
Indian Society for Training & Development- Delhi
Training Attend:
Management Development Programme.
Loss Elimination Need of Every Industry.

Place : Valsad
Date : / /

KAUSHALKANSARA

[Guest]

CURRICULUM – VITAE
MR. PITHA MAJHI
E-mail : majhipmajhi AT rediffmail.com
majhipmajhi AT yahoo.co.in
POST APPLIED FOR :-
- A suitable Post in the field of ‘PLASTIC INJECTION MOULDING’.
CAREER OBJECTIVE :-
- To be a member of a fast growing organization where growth prospects are unlimited and individual is recognized by his work as a professional.
WORK EXPERIENCE :-
1) Associated with M/s. 3D Packaging, Silvassa, D N & H. as plant incharge.
from Jan’10 to till date .
3D Packaging is a vendor of HUL, Loreal, Himalaya, Dabur, Emami etc.
2) Associated with M/s. Sanam Industries, Nampula, Mozambique as plant incharge.
from Jun’09 to Aug’10 .
Sanam Industries is a oil packaging company, manufacturing plastic product includes
Gallons, buckets and pet bottles etc.
2). Worked with M/s. Leo Plast Industries, Lagos, Nigeria. As Chief Engineer.
from Jan’07 to Feb’09 .
- Leo Plast Industries is a group (PAPILON) of company and it is one of the reputed plastic product manufacturing company in Nigeria. It’s product includes Household items, Pen, PET bottles, Furniture, Blow moulded container, PVC fittings and Thermoforming product etc.
3). Worked with M/s. Cello Millennium Houseware, Daman. As Sr. Engineer.
from Nov’05 to Jan’07.
- Cello Millennium Houseware is manufacturer of Houseware , Thermoware item and Pen etc
4). Worked with M/s.Flair Pen and Plastic Industries, Daman. As Sr. Engineer.
From Aug’98 to Oct’05.
- Flair Pen and Plastic Industries is a different kind of pens and office stationery etc.
JOB PROFILE :-
- Handling overall production, quality and maintenance activity.
- Analysis production and planning.
- Planning for spare for machine and utility.
- Increasing production efficiency.
- Improving the quality of the product.
- Coordinating and controlling all plant operation.
- Processing of different Plastic material (HDPE, PP, LDPE, PS, ABS, SAN, ACETAL,PET & PC etc.)
- Experience in different kind of Moulds such as Two Plate Moulds, Three Plate Mould, Dogleg Cam, Single and multi cavity hot runner Mould etc.
- Conducting new Mould trial & product analysis.
- Exposure to Aux. Equipments like Chiller, Compressor, Generator, Hopper Drier, Cooling Tower, Mould Temp. Controller, Blender & Grinder etc.
- Maintenance of Injection Moulding M/Cs.
- Worked with Injection M/c.
1). Windsor Make – SP
2). Mafatlal Nigata – CN
3). LTM Demag - 4K
4). Cincinnati Milacron – Sigma & Omega
5) CLF- TX , TY
- Installation of M/Cs. & plant start-up.
- Computer awareness & MS-Word, Excel, Internet accessing etc.
QUALIFICATION :-
# B.Sc. from Utkal University, Bhubaneswar, Orissa in 1997.
# PD-Diploma in Plastic Processing and Technology (PGD-PPT) from CIPET
Bhubaneswar. in 1998

[Guest]

I HAVE 15 YEARS EXPERIENCE IN INJECTION MOULDING . LAST THREE YEARS I WAS WORKING IN AFRICA AS A ASSI PRODN MANAGER IN TOPAZ MULTI INDUSTRIES PLASTIC S.R.A.L IN HOUSEHOLD AND FURRNITURE MANUFACTURING PLANT.
HARSHAD PARMAR
Email : harshad_np2005 AT yahoo.com
-
Objective : Seek a senior Position in plastic manufacturing industry through
Injection Molding.
Summary : Remarkably talented Injection Molding Machine Manager with more than fifteen years experience in setting-up and operating molding machines in accordance with standard procedures; maintaining an acceptable level of production, quality and housekeeping in accordance with good manufacturing practices.
Summary of Qualifications
- Deep knowledge of basic thermoplastic injection molding, and advanced thermoplastic injection molding.
- Exceptional ability to function efficiently and effectively in a team.
- Strong knowledge of plastic materials and processes.
- Excellent knowledge of injection molding processes.
- Uncommon ability to understand hydraulic and electrical circuits as applied to injection molding machines.
- Exceptional knowledge of auxiliary equipment involved in injection molding.
- Strong mechanical skills along with initiative and ability to work with minimum supervision.
- Handled 80T – 910T OMEGA FERROMETIC TWO COLOR WITH SERVO.
- Handled fully micro process controlled ENGLE 100T TO 300T TWO COMPONENT WITH ALL ELECTRICAL ENGLE M/C.. 80T– 275T M/C, SIGMA – 150T TO 300TM/C MAFATLAL,40TON TO 300T NESSAI,HAWACHIN.
- Handled installation and operation of OMEGA 100 TO 910 M/C.

Professional Experience
TOPAZ MULTI PLASTIC IND S.R.A.L, GUINEE,CONAKRY, CONACKRY SEPT 2008 – Till Date
ASSISTANT PRODUCTION MANAGER
- Verify correct set-up of molds, proesses and auxiliary equipment before machine start up.
- Handle complete production of household items.
- Handle comlete furniture iteam different type of chair and table and other.
- Handle create of cocacola,sobraguee,and other type creates.
- Establish proper molding conditions.
- Handle troubleshooting of molds.
- Assist with the set-up and maintenance of auxiliary equipment, including granulators, conveyors, liquid temperature controls, and mold electrical controls, Prasad Koch hopperloader with masterbatch mixer.
- Make minor repairs to machines and equipment and notify proper personnel of necessary major repairs.
- Assist Mold Attendants as time permits and help relieve other Molding Technicians for breaks and fills in during personnel shortages.
- Assist Supervisor with training programs for new employees.
- Responsible and accountable for : achieving adequate production levels, maintaining the expected product quality, and keeping area clean and in order.
- Familiar with all the department's inspection procedures and standards.
- Responsible for the regular and periodic monitoring of product for acceptable quality to the most recent specification.
- Maintain records and prepare legible reports, including plant eifficency reports, QC inspection reports, housekeeping checklists, mold cavity data sheets, production downtime reports, cycle time sheets and problem/corrective action logs, etc. accordance with departmental standards and Quality System Standards.
- Observe all safety and environmental procedures and Good Manufacturing Practices.
- Work with limited supervision and maintain an atmosphere of cooperation among and between shifts, mold repair shop, quality control, and management to facilitate departmental goals.
JWELL BRUSHES LTD, PADRA BARODA, OCT’2006 – SEPT’2008
PLANT INCHARGE.
- Installed complete IM machinery and established troubleshot processing issues.
- Performed process changes as needed to maintain quality.
- Monitored quality and productivity using prints and criteria sheets.
- Reduced production loss by 2.8 %.
- Assisted other molding personnel including operating machinery as needed.
- Performed preventative maintenance on all machinery.
- Performed repairs on all machinery including basic electrical and hydraulic issues.
- Communicated with other company personnel via status reports.
- Monitored/performed packaging of finished product.
- Maintained a clean and professional work environment.
- Handled complete production of SINGLE,DOBLE AND THREE COMPONENT TOOTH BRUSHES AND household items.
SHAILLY ENGINEERING PLASTIC LTD, HALOL,BARODA DEC2004– OCT’2006
Production ENGINEER.
- All type engineeringplastic like pet,peek,nylon,pc,ABS,SAN,ACETAL,PBT,PES,AND ALL THERMOSET PLASTIC used.
- Coordinating and job allocation to group of production Supervisor and team of employees.
- Trouble shooting of process and Equipment procurement of critical spare parts
- parameters and maintaining production data sheets.
- Maintaining the machine history files.
- Attending preventive and breakdown maintenance.
- Commissioning of auxiliary equipments, dryers, loaders..
Ankur surgi pharma ltd, ahmedabad, India jan2001 – nov2004
production exucutive.
- Installed complete IM machinery and established troubleshot processing issues.
- All type soft pvc developed and used and syringe 3ml,6ml project done
- Whole production assembly established.
- Coordinating and job allocation to group of production Supervisor and team of employees.
- Trouble shooting of process and Equipment procurement of critical spare parts.
- parameters and maintaining production data sheets.
- Maintaining the machine history files.
- Attending preventive and breakdown maintenance.
commissioning of auxiliary equipments, dryers, loaders
CORE HEALTH CARE LTD, SACHANA AHMEDABAD,INDIA
APRIL1995 TO FEB2000
AS A PRODUCTION OFFICER.
- Working with scober and scottly multy cavity mould and prosees and quality control.
- Trouble shooting of process.
- Equipment procurement of critical spare parts
- Attending preventive maintenance and breakdown maintenance of injection molding machines also.
- Installation and commissioning of new machines.
Education and Professional Training
1994 Post graduate diploma in plastic processing and technology from CEPET
, ahmeddabad, India.

1993 B.SC CHEMISTRY GUJARAT UNIVESITY

[Guest]

Dear sir/madam
I HAVE 10+ YEARS EXPERIENCE IN INJECTION MOULDING.IA AM WORKING IN TARSONS PRODUCTS PVT LTD AS A PRODN MANAGER .
CURRICULUM VITAE
Rupesh Kumar Nayak
rupeshnayak5287 AT gmail.com
OBJECTIVE
Seeking A Challenging Career, Looking Forward To Be A Part Of Dynamic Team & Highly Qualified Professional Having Abundant Scope & Recognition For Hard Work, Honesty & Sincerity.
EXPERIENCE (TOTAL 10+ Years )
Company Profile : M/S Tarsons Products Pvt. Ltd ,TARSONS is a leader in India in the Production & Supply of Laboratory Plastic Ware for use withen molecular Biology ,cell Culture,Genomics,Proteomics & immunology.
Designation : Manager Production
Period : April- 2011 to till date
Company Profile : M/S Lumax Manas Automotive Systems Ltd. An ISO/TS16949:2002 Certified leading Indian company manufacturing Automotive Components and Assemblies for OEM's Injection & blow Molded Parts(Mirror assy,air filters, Automotive Plastic molded components, The company is supported by in-house design and development facilities like modern tool room for manufacturing of moulds, dies, jigs and fixtures, and design facility is supported with leading 3D modeling software’s like Pro Engineer, Catia & Unigraphics.
Designation : Asst. Manager Production
Period : May. 2010 to April-2011
Company Profile : M/S Minda Valeo Security System Pvt. Ltd., Pune
Minda Valeo Security Systems Pvt. Ltd. is a Joint Venture between A K Minda Group & Valeo Security Systems, France, Minda Valeo Security System Pvt. Ltd an ISO/TS16949 :2002 & ISO 14001 Certified Company manufacture of Locks & Key, Steering Column Locks, Inside / Outside Door Handles, Latches, Back Door Openers, Freewheeling Systems, Transponder Immobilizer, Remote Controls, Antenna , Remote Key less entry, Integrated Remote, Manual Central Door Locking, RF Immobilizer .Major Customers are Eicher Motors , Fiat India Ltd., Force Motors, Ford India Ltd. ,General Motors India , Mahindra & Mahindra Ltd., Maruti Udyog Ltd., Tata Motors, Toyota Kirloskar Motor Ltd., Daimler Chrysler( Germany), Ford (Mexico/Southafrica), Uz Daewoo (Uzbekistan), Cherry (China), Piaggio(Italy), Cobo(Italy), ITEC(Usa), Valeo Security System (Italy).
Designation : Member (Component Shop)
Period : May 2009 to April 2010
Company Profile : Jyoti plastics Works pvt ltd, Daman
Jyoti plastic works pvt ltd is an ISO 9001 -2000 Certified company manufacture of
Pump parts, flow control equipment, cooling tower etc since 1959 .It is one of India
Leading plastic manufactures not only for specialized products such as flow control
Equipment, submersible pump parts but it also an important OEM manufacturer for big
Industrial Houses whereby we use our facilities to encorpate their needs. Major Customers are Forbes Aquatech, Pentair Waters, Aquasub Engineering, Texmo Pumps,Laxmi Pumps,Godrej,Bharat Electronics ltd,Caprari Italy etc.
Designation : SR. Executive-INCHARGE (INJECTION MOULDING)
Period : July 2007to till April 2009
Machines Handled : Microprocessor controlled highly sophisticated HWA CHIN 125T -210T .HAITAN 120T, 260T, 380T, L&T 100T, SUPERMASTER 550T
Material Processed : PPO,nylon6,nylon66,HIPS,PPTF,PBT,PP,ABS CLEAR,TPU,ABS,PC
Job Profile : - Responsibility of operational Production Planning.
- Manpower Planning in Production Shop Floor.
- Responsibility of Quality Plastic Processing through 18 Injection Molding Machine
- Management & Job Distribution to Engineers, Supervisors. Utilizing all available resources Viz. Machine, Mould, Material and Manpower.
- Co-Ordination with Q.A Dep't. to maintain desired quality of Products & Rejection Analysis.
- Co-ordination with Maintenance Dep’t. to ensure maximum machine utilization.
- Co-ordination with Tool Room for Mould Maintenance modification and rectification.
- New mould trials.
- Personal activities like employee’s motivation, Training of key shop floor personal, infusion of job dedication and teamwork spirit among workers & maintaining cordial relations with them.
- Finding out new methods to improve efficiency & to increase productivity levels.
- Responsibility of technically satisfying the Customers.
- Actively involved & responsible to maintain 5 S & KAIZEN activities.
- Responsible for Data Collection related to process and the customer rejection, analyze it, & how to minimize the process and customer rejection.
- Responsible for Trials of new moulds & materials, freezing of Process Parameter Sheet.
- Responsible to reduce the Cycle time, Material saving & also improvement in process.
Company Profile : MOTHERSON SUMI SYSTEMS LTD.MANESAR GURGAON.
A TS 16949 & EMS 14001(A unit of Motherson Sumi Systems Ltd)
MATE offers Injection & Blow Molding Solutions for Automotive as well as Non-Automotive companies. It has capability to mould parts from 40T to 3000T in Injection Molding 5 litter to 15 litters & 1.1 Kg. to 2.2 Kg incase of Blow Molding. The Manufacturing facilities include Robotic Trimming operations & Assembly operations.
The Auto components made by MATE include Roof Rail, handles, wind Shield Bottle, Radiator overflow bottles, Heating & Air conditioning Ducts, Arm rest, Resonator, Fuel tanks (2 wheeler) major Customers are MARUTI UDHYOG LIMITED, HONDA SIEL CARS INDIA LIMITED, BAJAJ AUTO LIMITED, AUTOMOTIVE WIRING SYSTEMS (Pune). The Non Auto components made by MATE are Refrigerator & Toner containers, Cartridge, pen & stamp (child parts), Air muffler supplied to companies like ELECTROLUX, XEROX, MSSL& LG, and Whirlpool.
Designation : Asst. Engineer(INJECTION MOULDING)
Period : May 2001 to June 2007
Machines Handled :
Microprocessor controlled highly sophisticated L&T(40T-200T),CINCINITI(60T-150T),BOARCH(55T-380T),FCS -110T & 450T,MITSUBISHI(850T-1300T), Battlefield 160T,ANGEL,Gas assested injection molding
Material Processed : ABS, PS, PMMA, PC, POM, PP+EPDM Blend nylon6, nylon66, HIPS, GPPS, PP, PPTF, SAN, PBT, ABS+PC Blend, Xenon etc.
Job Profile : - Responsibility of operational Production Planning.
- Manpower Planning in Production Shop Floor.
- Responsibility of Quality Plastic Processing through 21
Injection Molding Machines.
- Management & Job Distribution to Supervisors. Utilizing all available resources Viz. Machine, Mould, Material and Manpower.
- Responsible for Trials of new moulds & materials, freezing of SMC’s.
- Responsible to reduce the Cycle time, Material saving & also improvement in process .
- Reduction of manpower.
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬________________________________________________________________________
TRAINING UNDERTAKEN
- Training on job relation ,job Instruction , Problem solving tools & also Quality Circles in Sumi Motherson Group By Q spread
- Training Attended about “lean manufacturing system “ & Six Sigma in jyoti plastics pvt ltd by Alpha Mindz in GOA
- Training Attended about “First Aid Training “in jyoti plastics pvt ltd by “Mumbai Maritime Training Institute in Mumbai
- Training Attended about “Fire Fitting “in Lumax Manas Automotive systems ltd.
- Training Attended about “QSB” in Lumax Manas Automotive systems ltd. By GENERAL MOTOR, Talegaon, Pune.
_____________________________________________________________________________
ACHIEVEMENTS
- Won Gold medal for participant of 8th annual quality circle competition 2006-2007 for “Reduction of Man power in Assembly line “in Sumi Motherson Group.
- Cycle time reduction of various moulds.
- Reduction in rejection percentage.
- Shifted various moulds from higher tonnage to lower tonnage.
. Reduction in lumps.
- Reduction in mould change time by improvement in activities & tools standardization.
- Reduction part wt. of various Parts.
- Converted from Semi auto to auto mode of various moulds.
_____________________________________________________________________________
EDUCATIONAL QUALIFICATION
- Pursuing Bachelor of engineering (Mechanical) from Rajasthan Vidyapitha (Deemed University).
- Diploma in Mechanical from B I T, Berhmapur.

[Gajanansmita]

GAJANAN BHAGURAM SHIRISKAR

Email : gajanan1974 AT gmail.com
Seeking assignments in Manufacturing Operations /Technical Sales / Quality Assurance with a growth oriented organisation.
PROFESSIONAL SYNOPSIS :
- Over 15 years of experience in Plastics Manufacturing Operations, PPC, Maintenance, Design & Development.
- Demonstrated abilities in achieving cost savings across assignments. Managed operation & maintenance of production equipments in reducing downtime and enhancing operational effectiveness of equipment.

ORGANISATIONAL EXPERIENCE :
Career Highlights :
Feb’10 - Till Date -Plastlink Technologies , Mumbai - As a Plastics Consultant
Oct ‘98 - Feb’10 -Regal Plastics Ltd. –Ikeja, Lagos, Nigeria. - As Injection Moulding Manager
- As a Factory Manager
- As a Project Development Manager
Sept’95 – Sept’98 -DGP Windsor India Ltd, - Thane, Maharastra, India. - As a Service Engineer
Aug’94 – July’95 -Polyset Pvt. Ltd. - Talasari, Maharastra, India. - As a Shift Engineer
Dec’93 – Jun’94 -Bright Brothers Ltd. - Mumbai, Maharastra, India. - As a Trainee Engineer
Dec’92 – Jun’93 -Premsons Pvt Ltd. - Mumbai, Maharastra, India. - As a Trainee Engineer

Chief Tasks Handled Across the Tenures :
- Responsible for overall manufacturing operations, Product Design and Development, accountable for strategic utilisation and deployment of available resources to achieve organisational objectives.
- Designing and executing systems and processes for enhanced monitoring and control of resources and improved operational efficiency.
- Raw materials planning.
- Vendor Development.
- Managing resources to perform manufacturing activities in cost effective manner.
- Dealing with consultants/ licensors/ vendors for compliance of requirements.

PPC :
- Planning day-to-day activities, production schedules, implementing quality tools and allocating work for achieving of monthly production targets.
- Appraising the prevalent production systems / processes, identifying loopholes if any and undertaking result-oriented measures for alleviating them.
- Identifying, developing & maintaining local vendor base for obtaining timely procurement of materials at favourable terms to ensure smooth manufacturing operations.
- Identifying scope for
- Planning, implementation and monitoring of technological changes to enhance productivity.
- Modifications in equipments, process flow, working practices, consumables, power etc. for controlling & reducing conversion cost per unit produced.

Maintenance Operations :
- Planning and effecting preventive maintenance schedules of various machineries and instruments to increase machine up time and equipment reliability.
- Proactively identifying areas of obstruction / breakdowns and take steps to rectify the equipments through application of trouble shooting tools.
- Executing cost saving and energy saving techniques/ measures and modifications to achieve substantial reduction in O&M expenditures and work within the budget.

Quality Assurance & Inspection :
- Formulating & implementing inspection process & quality strategies by extensively using diagnostic/ advanced/ optimisation statistical tools & techniques for continuous improvement in process capabilities.
- Monitoring adherence to various Quality System viz. NIS for maintenance of quality levels.
- Conducting Quality checks and inspections for ensuring quality.

Notable Achievements :
*** Plastlink Technologies, Mumbai based customer focused organisation dedicated to deliver high quality solution for plastics industry and is committed for supplying quality product and services at the most competitive prices.

As a Plastics Consultant –Plastics Technologies-Mumbai :
- We give technical services like up gradation of production technology, Turnkey project setups in plastics industries, process optimization & automation. Retrofitting of moulding machines. I am handling there Mumbai branch.
*** Regal Plastics Industries Ltd. is manufacturing HDPE/LDPE/LLDPE Shopping Bags. The manufacturing Process includes the Extruder - 16 nos – make yoojin from Korea – Cutting machines – 16 nos- make Taijine from Korea, Printing Machines ( Flexo) –1 no, Manual printing Machines – 3nos, Manual sealing Machines – 3 nos, Factory Staff strength App. 140 nos.
As an Injection Moulding Manager –Regal Plastics Industries Ltd...- Nigeria.
- Successfully started Injection Moulding Dept. Process includes injection moulding m/c-6 nos.- make DGP WINDSOR. Then we expanded injection dept. with 21 DGP WINDSOR (sp/sph series 30-180 tons) & 2 Ferromatic Milacron (omega 250 & omega 350 two colours). With market demand of two colour plastics products, we did retrofittment of two colours for existing Windsor m/c. At present we are producing 140 varieties of injection foaming / non foaming assembly products like casseroles, Bathroom products, kitchen containers with production capacity of 10 tons per day.
- Designed and executed systems and processes for enhanced monitoring and control of resources and improved operational efficiency and effective Data collection from Shop floor and educated workforce towards Quality aspects.

As a Factory Manager-- Regal Plastics Industries Ltd.- Nigeria. :
- Handling of Injection Dept. & Extruder Dept.
- Successfully implemented energy savings concept in machineries & utilities.
- Scheduling and Implementing the Preventive Maintenance Systems for the Machineries and the Utilities.

As a Project development Manager – Regal Plastics industries ltd.—Nigeria :
- Partially involved in blow moulding project & oven sacks project.
- Successfully established new mono layer single colour / two colour shopping bag project of 10 tons per day production capacity in sango- otta. Project involved extruder m/c-17nos, high speed cutting m/c-7nos. All machineries were import from TAIWAN.
- Visited Taiwan for m/c inspection & modification.
**** DGP Windsor India Ltd. Is largest & reputed company in manufacturing of injection
Moulding m/c, extrusion m/c, blow moulding m/c.
As a Service Engineer – DGP Windsor India Ltd. – India :
- Doing trouble shootings of electrical, hydraulics, mechanical problems & commissioning of all series & capacities of Windsor injection moulding m/c. While working with Windsor, I visited many plastics industries throughout India.
**** Polyset pvt. Ltd. Is also one of the leading companies in plastics industries in
Manufacturing of household products like buckets, crates, kitchen container & industrial
Product like TV housing, godrej refrigerators parts, telephone sets & its internal parts
Processed with HDPE, PP, PS, HIPS, LDPE, ABS, PC, NYLON raw materials

As a Factory Shift Engineer– Polyset Pvt Ltd. - India :
- Attaining production target by solving processing & m/c maintenance problem. By working with polyset I got processing knowledge of different variety of raw materials, production planning, maintenance planning, manpower handling,

ACADEMIC QUALIFICATIONS :
- S.S.C. – Passed ( first attempt ) with 77 % from Shardashram Vidyamandir School, Mumbai, Maharastra , India, In March 1990
- Diploma in Plastics Engineering (DPE) –Passed ( first attempt )with 65% from Shree Bhagubhai Mafatlal Polytechnic, Mumbai, Maharastra, India, in June 1994
- 6 days Industrial Automation Training - ISA - IAT Training programme from Automation & Control Systems, Pune,Maharastra, India, in Jan 2008

[Guest]

Resume
Partha Das
partha.garia AT gmail.com

Career Objectives
Summary : To secure a management position in a high growth company with considerable advancement opportunities. Ideally, in a business development capacity with an emphasis on strategic planning.

Work Experience
Summary : 13 years (approx) as on Mechanical / Civil / Electrical job in Production /
Manufacturing / Construction / Hospitality Industries at different locations in India.
Employment Histories
Springfield Projects Pvt. Ltd. (The Spring Club) Kolkata, W.B.
Profile : Realest–Civil-construction-Club-Resort Project business. Best members based Clubs in Kolkata.
Having facilities with 5 Star category - Guest house, Conference hall, Banquet Halls, Gym, SPA, Swimming Pool, Indoor cricket- football, Others indoor spots activities, Disco, Bar, Coffee shop, Restaurant, Library etc..& certified on ISO 22000 :2005 on maintaining Food Safety Management System (FSMS).
Start Date : May 2007
End Date : Current
Position : Asst. Engineer (Maintenance Dept.)
Responsibilities :

- Job areas - Electrical, Civil, Mechanical work responsible on AC, Softener water plant, Generator, Gas bank, Solar water system, Refrigerator, Plumbing , Carpentry, painting & others general maintenance as on requirements.
- Work as a Departmental head [Spring Club], Controlled Mechanical, Electrical & Civil job by preventive & break down maintenance, planning & developing, Maintained the ISO system with records).
- Production planning & control, Venders Control , i.e. AMC & others by technical communicate with quotation & rate negotiate, prepared work/purchase order, bill settlement etc.
- Team member of developing, implementing & maintaining food safety management in line with ISO 22000 : 2005 system.
- Daily reporting to G.M.

Kuber Construction (P) Ltd. (Udyogi Plastics) Kolkata, W.B.
Profile : Manufacturer & exporter of industrial safety helmets, safety belts, road safety equipments, Automobile & domestic house hold plastics items. Having business on Building construction - Civil projects.

Start Date : Jul 2005
End Date : Jan 2007
Position : Manager (Production & Maintenance)
Responsibilities :
- Production planning & control.
- Development work on Mould & Design (Tool room).
- Quality control.
- Mould / Dies and Machine maintenance.
- Responsible on Mechanical & Civil job work for industry.
- Daily reported to Managing Director.
K. R. ENTERPRISE Kolkata, W.B.
Profile : One of the best Tool room (work shop). Well equipped with tools & machineries i.e., Milling, Shaping, Drilling, Grinding, Leath, EDM, Pentograph…etc. Manufactured & product developed mechanical job worker for Plastics industries and Other engineering industries.

Start Date : Sep 2004 May 1998
End Date : Jul 2005 Jan 1999
Position : Chief Supervisor Supervisor (Tool room)
Responsibilities :
- Supervised on Job works, Log book maintain, Job inspection by measuring instruments.
- Production plans, Drawing reads, Raw material indent, material stocks maintain.
- Practical job work on tool room machineries operation, prepared duty roster.
- Daily reported to Manager (Tool room).


Presvels Private Limited. Mandideep Dist, Raisen, M.P.
Profile : Manufacturer of L.P.G. Cylinders & heavy fabrication job.
Start Date : May 1998
End Date : Jan 1999
Position : Supervisor Lab.
Responsibilities :
- Monitoring all aspects of quality control in Lab.
- Maintain records of product quality parameters.
- Sample testing work by using Lab instruments.
- Reported to Q.C. Incharge (lab).


Linc pen & Plastics Ltd. Kolkata & Goa
Profile : Won Processing & Tool room units having in Kolkata, Haldia & Goa with so many production venders in deferent parts in India. Manufacturer of Ball pens, Gel pens & other writing & drawing equipments. Company is collaborate with MISTSUBISI - JAPAN & BENSIA PENCIL CO. - THAILAND )
Start Date: Feb 1999
End Date: Aug 2004
Position: Senior Shift Incharge (Prod. & Maint.)

Responsibilities: - Monitoring all aspects of production.
- Monitoring on quality control.
- Development of Mould & Design (Tool room).
- Co-ordinate with Injection moulding, Extruder moulding & Refill filling departments.
- Surprised visit to check production & Q.C. to deferent vender’s house.
- Daily reported to Production Manager.
Vidyut Metallics Limited. (Supermax Blade), Malhotra Groups - Thane, Mumbai.
Profile: Manufacturer & exporter of all types of Saving razors & Industrial Blades.
Start Date: Aug 1996
End Date: May 1998
Position: Junior Engineer
Responsibilities: - Monitoring on Mould & Dies maintenance.
- Monitoring on processing & trouble shooting at Injection moulding dept.
- Monitoring on Mould Spare developments.
- Communicate with Blade processing dept.(Processed Blade by using hi-technology with maintained different stages. Cutting Steel as on strips formation. Maintain thickness by using rolling mill machine. Next process – passed the strips in between Dies for proper size & shape by Auto punching M/c. Next it has passed through in the Furness for heat treatment. Next - passed through in Auto grinder M/c. for better sharpness by three different tapered angles. Finally – It has passed through in Auto coating machine for antiseptic purpose).

Technical Qualifications
Completed: 3 yrs. Diploma in Plastics mould making Technology. **(Equivalent to Mechanical Engineering).
Institution: Central Institute of Plastics Engineering & Technology (C.I.P.E.T.) – Chennai, Tamilnadu.
Position: Overall “B” (60% to 80%), In Practical “A” (80% to 100%)
Completed: 1 yr. Post Diploma in Plastics Mould Design.
Institution: Central Institute of Plastics Engineering & Technology (C.I.P.E.T.) – Ahamedabad, Gujarat.
Position: (60% to 80%)

Professional Qualifications
Completed: Diploma in Total Quality Management & ISO-9000.
Institution: National Institute of Labour Education & Management – Chennai.
Position: 1st Class
Completed: Certificate in AUTO CAD.
Institution: C.I.P.E.T. & DOEACC - Jadavpur University.
Position: Passed
Completed: Certificate in Office Automation (Dos, Windows, MS-Office).
Institution: M/s. Trionet Info System - Kolkata.
Position: Passed
Academic Qualifications
Completed: B.B.A. ( Bachelor of Business Administration) - appeared
Institution: Annamalai University (Chennai)

Completed: H.S. (Higher Secondary, 10 + 2)
Institution: W.B.C.H.S.E. ( West Bengal )
Others Profiles
Completed: 5 yrs. Junior & Senior Diploma in TABLA (Musical Instrument)
Institution: Prayag Sangit Smite - Allahabad, U.P. & Bengiya Sangeet Parishad - West Bengal.
Achievements:
- Award Winner on Art work competition on Plastics waste in Commensurate from
National Seminar an "Emerging Trends in Plastics Recycling Technology & Waste Management" – Goa
- Number of certificates on Indoor & Outdoor Games & Sports.
- Knowledge on E-mail & Inter net surfing.

[PARTHA DAS]
Place: Kolkata

[Guest]

- Objective :

To pursue a career in a visionary team and to develop myself with the company with aims at achieving targets successfully, provide me exposure to the work culture and offer me challenges as well as opportunities for my career advancement in the technical field.

- Personal Skills
Comprehensive problem solving abilities, ability to deal with people, willingness to Learn, team facilitator.

- Working Experience 6.0 Years :
UKB Electronic India Pvt. Limited Noida (U.P) :
- Working with UKB Electronic India Pvt Ltd. Noida in QA Dept. As a
Sr. Engineer Quality & Plastic Division Incharge
( Plastic Injection Molding, Blow Molding , PVC Compounding , Incoming Quality & Coustomer QA & Vendor Development, Cable Quality) From Aug.’2010 to till date.
- UKB Electronic India Pvt. Ltd is a Multinational company, in which manufacturing Power Cords, Cables & Wires, PVC Compounding , Wire Harness and Plastic Moulded Plug.

- Job Profile :
- Responsible for Plastic Division as a Division Incharge .
- Responsible for Quality of the Coustomer end & Vendor Development & IQC.
- Responsible for Quality of the Plastic Injection Molding & Blow Molding
- Responsible for Quality of the Injection molded PVC plug by testing the thickness,colour etc.
- Responsible for maintain the Quality of Cable , Power Cords by many testing methods like HV Test, LT Test, Drop test, color Test, dimensional (fitting related) and Electrical testing etc.
- Responsible for Incoming Quality (IQC) Incoming Mould & Raw material Approvel , Vendor Audit & meeting , Daily Review on Line & Coustomer Quality issue also making CAPA for Same.
- Responsible for material management consult with planning.
- Keeping the responsibility of reprocess management.
- Keeping the last shot management responsibility.
- Controlling the external manufacturing.
- Responsible for process capability study for every machine & doser.
- Vendor audit for all material supply.
- Responsible for quality of incoming molding and other goods.
- Responsible of making Quality scrap report, Weekly ware house Audit report, Accepted major probelms report, Daily report, monthly report. Entering in PSR of all data through Online UKB website,

- Key Result Area :
- No access master batch usages.
- No complaint on last / first shot management.
- Re control cost on hold item.
- Scrap reduction up to less than 2 %.
- Meeting with Vendors for Quality Related issue on weekly basis.

M/s Havells India Limited :
- Worked in Havells India Limited. (Billion Dollar Plus Organization) in QA Dept. As an Officer from June 2007 to August 2010.
- M/s Havells India Ltd. is a multinational company. It is producing Cables & Wires, Modular Switches Motors, Fans, Domastic Appliances, Industrial Applications etc.

- Job Profile :
- Responsible for Quality of the Coustomer end & Vendor Development & IQC.
- Responsible for Quality of the Plastic Injection Molding & Blow Molding
- To maintain the Quality of finished molding goods of cables & PVC compounding items.
- To maintain the Quality of incoming goods of all materials as per Quality Test Standard.
- To maintain the OS&D (Over Shortage & defect) data of Line rejected materials.
- To maintain the 5S activities in our specified area.
- Daily audit of product and process.
- Daily sending the report of Quality index for our manager.
- During machine audit if any problem arise than raise the N.C Report and responsible department gives the corrective action and we are follow these action they are using in his process to improve the product quality.
- Made the Counter Measures of customer complained and present it during Quality meeting.

- Key Result Area :
- To reduce the rejection of Cables & PVC Compounding.

- Training Attended :
- 5s training.
- Safety training

- Technical Qualification :
- Three Year Diploma in Plastic Technology and Engineering from Government Poly.Ambala city (Haryana) with first div marks in the year 2007.
- Pursing B.Tech Plastic Technology from SIOM (Delhi).
- A three month basic course on basic computer from Aasirvaad Computer Pvt. Ltd Karnal (Haryana)

- Academic Qualification :
- Passed 10Th from HBSE Bhiwani (Haryana) with first div marks in 2004.

- Personal Details :
Sex Male
Marital Status Married
Date of Birth 6th 02 1989
Language Expertise English, Hindi, & Punjabi.
Computer Awareness MS office, Internet & other Applications.
Current CTC 2.8 Lac.
Permanent Address Distt. Kaithal-136026 (Haryana)

- Strength :
- Adjust with any type of work environment.

Date : (Kuldeep Sharma)

[Unregistered]

CURRICULUM VITAE
Vijay Kumar Arya
Email :-vijay.jnu10_12 AT yahoo.com

OBJECTIVE :
To get an opportunity to serve an esteemed growing organization to become an active part by contributing positively towards the realistic growth of the organization.

QUALIFICATION :
Professional Qualification :-
Master of Business Administration (MBA) with dual Specialization in Finance and Marketing from School of Management, Jagan Nath University, Jaipur (2010-2012).
Bachelor of Business Administration (BBA) from University of Commerce College (Rajasthan University, Jaipur).

Academic Qualification :-
HSE (RBSE), Behror in 2006
SSC (RBSE ), Behror in 2004

WORK EXPERIENCE :
Worked with EPIL (Eastern Polycraft Industries Ltd.) as Asst.Marketing Manager from March 2012 to Now.
Job Responsibilities :-
Find for New Company.
Direct sales.

SUMMER INTERNSHIP :
Organisation : Hi-Tech Agricare Pvt. Ltd. Jaipur
Project Title : “A Complete Analysis of Potential Market of GPS based Vehicle Tracking System Transport in Jaipur”.

ACHEVEMENTS :
Third Rank in Case Analysis Competition Event 2011 at Jagan Nath University, Jaipur.

STRENGHTS :
Dedication
Punctuality
A Team Player

COMPUTER PROFICIENCY :
Good at working with MS Office.
Familiar with internet.

EXTRA CURRICULAR ACTIVITIES :
Participated in "SOCIAL SERVICES" Such as Pulse Polio Program & National AIDS Control Programs.
Participate in various Seminars and Programs in College.

PERSONAL DETAILS :
Father’s name : Mr.Girraj Parsad Arya
Mother’s name : Narbada Devi
Date of birth : 3th July, 1988
Gender : Male
Marital Status : Single
Language known : English and Hindi

REFERENCES :
Mr. S.Patra
Plant Manager
EPIL (Eastern Polycraft Industries Ltd.Bhiwadi), Alwar
Mr. Lalit Mahapatra
Production Manager
EPIL (Eastern Polycraft Industries Ltd.Bhiwadi), Alwar

DECLARATION :
I hereby declare that the above information furnished here are true & correct as per the best of my knowledge.

Place :-
Date : -
(Vijay kumar arya)

[Unregistered]

RESUME
ISHWER DYAL
E Mail- ishwar_dayal1 AT yahoo.com

OBJECTIVE :
Term and Job oriented environment contributing to the work culture, So as to make the job intrinsically satisfying and to grow the organization.

PRESENT DETAILS :-
1. Working with DIPTY LAL JUDGE MAL PVT.LTD as an a Asst.Manager in TRONICA CITY, LONI from July 2011 to till now.
COMPANY PROFILE :-
DIPTY LAL JUDGE MAL PVT.LTD is working for Samsung India electronics pvt.ltd, Kent R.O,MARUTI SUZKI, YAMAHA MOTOR L.G etc. it is manufacturing of Plastic molding components like washing Machine, R.O system parts, maruti parts etc.
JOB PROFILE :-
** Machine Capacity Analysis.
** To achieve the target as per production plan.
** To check the daily production report.
** To ensure the smooth functioning of the production department.
** Responsible for improving productivity, reducing machine down times, rejection and mould change time
** To ensure that proper implement of 5S.
** To keep routine check on the working of the Shift engineers & the Supervisor.
** To ensure more quality production and minimum rejection.
** To keep a check on machine efficiency.
** Implementation of new techniques to increase productivity.
** Reducing rejection with the help of trouble shooting.
** Responsible for Trial of New product till it converts in to mass production.
** Be the part of team for continuous improvements (KAIZEN) & Mistake proofing.
** Maintain records of the Rework, Rejection and non confirming material
** Trial of new Moulds & material for a mass production

Previous details :
2. Worked with S.I PRECISION Mould Pvt. Ltd. (Unit of Inkotech India Pvt. Ltd.) Since April 2009 to June 2011 as a Sr.engineer.

** Worked with M/S Inkotech India Pvt. Ltd. (ISO 9001-2008, EMS 14001 :2004 & OHSAS 1801:2000 Certified Company) as a Sr. Engineer from June 2004 to April 2009.

** It is a Korean Company (MNC), having two branches in India one in Noida and another in Chennai It is working for Samsung India electronics Pvt. Ltd. It is a manufacturing company of plastic molded components like TV,Computer Monitor, Refrigerator and Washing Machine, A.C MOLD, LCD,LED, Etc

JOB RESPONSIBLITIES :-
** Successful implementation of production planning and achieving set production target.
** Over all responsible for Molding Operations and report to operation head..
** Responsible for obtaining Mold Shot Detail as per SOP Module (Samsung work site) to determine the Mold Life.
** Responsible for improving productivity, reducing machine down times, rejection and mould change time.
** Responsible for modification in process and other production aids for higher output and continuous improvement in quality. Co ordination of Quality Dept. for defect components, discuss about correct procedure to prevent Rejection.
** Implemented standards for excellent facility efficiency and workplace safety.
** Man Power Control
** Maintain 5S on shop floor

ACHIVMENTS :-
** Introduced with TOC (Twin Screw) machine, mould, & there utilities.
** Getting knowledge about how to TOC MOULDS load & unload on machine.
** Training about the working process of the TOC injection molding.
** Training about the maintenance and safety of the TOC injection molding and machine.

RANGE OF MACHINE HANDLED- :
** JONWAI (95T,100T,220T ,450T)
** HYUNDAI (550T,650T)
** DONG SHIN (300T,550T)
** L.G. ( 45OT, 550T,650T,850T,1300T,1800T)
** KM (650T, 1600T) (TOC Machine).
** HAITAN (780T,1000T,320T.470T,530T,120T,90T,160T)
** SPERRY (110T)
** SUMI TOMO ( 650T )
** ELITE (500T,360T)
** RS 20 LITRE, 30 LITRE

MATERIAL USED :
** HIPS, ABS. GPPS, SAN. P.P, P.C, SAN ABS /PMMA, HDPE, NORYL, NYLON 6,6 ,NYLON GF, DERLIN.

PREVIOUS EXPERIENCE :-
** Worked with Chand Industry, NIT, Faridabad, Since May 2000 to June 2004 as a Production Engineer.
** CHAND INDUSTRY is a leading company in Faridabad with TS/ISO-16949-2002. It is engaged with manufacturing various type of ELECTRONIC, ELECTRICAL & AUTOMOBILES PARTS for companies like Honda, Mind, Yamaha, A.G. Veroc, etc.

MACHINE PROCESSED :
** Electronic (125 – 350) Ton
** Fermatic (sigma, omega) (80-400) Ton
** Roman (20-40) Ton
** Anokhe (100) Ton
** Hation (450T)

MATERIAL PROCESSED :-
P.P., P.C. (Nat) & P.C. (Black,) ABS, HIPS, P.E., DELRIN, SAN, G.P.P.S., Nylon 6, Nylon 66, Nylon G.F., P.V. C. (Soft)

MOULD HANDLED- :
Two plate, Three plate, Hot runner mold , Shut of pin, Steam mould,Toc mold ,Gas mold, blow molding mold etc.

JOB PROFILE :
** Totally responsibility for production & rejection molding shop.
** Documentation & Production records as per ISO/TS requirement.
** Independently trials of new molds.
** Optimum Utilization of Manpower and machines.
** To make continues improvement plan to improve production with Quality Product.
** Preventive & running maintenance of M/C & tools.
** Ensuing proper department house keeping & safety Standard as per 5 S norms.
** Responsible for production planning as per as customer’s requirement to arrange training of worker for special process.

SPECIALIZATION :
** Cycle Time reduction.
** Reduction in mold change time

TECHNICAL QUALIFICATION :
** Post Graduate Diploma in Plastic Technology (PGD-PPT) from Plastic Engineering & Technology (CIPET) from Ahemdabad in July 2000.

EDUCATIONAL QUALIFICATION :
** M.Sc. (Math) from C.C.S. University, Meerut in the year 1998.
** B.Sc. (PCM) from C.C.S. University , Meerut in the year 1996

COMPUTER LITERACY :
Basic Knowledge of computer (Ms. Office, Excel, Internet etc.)

PERSONAL INFORMATION :
Name : ISHWER DYAL
Father’s Name : Sh.Madan pal Tyagi
Date of Birth : 8th Nov 1975
Sex : Male
Marital Status : Married
Nationality : Indian
Language Known : Hindi & English

DECLARATION :
I hereby declared that above information are true in my knowledge. I assure you that if you given an opportunity in your organization will prove in assets to your firm.
Date : ………….
Place : ………….
(ISHWER DYAL)

[Unregistered]

CURRICULUM VITAE
LALIT CHANDEL
E-mail : lalitchandel86 AT gmail.com
lalit9780 AT gmail.com

Career Objective :
Seeking a position to utilize my skills and abilities in such a Company that offers professional growth while being resourceful, innovative and flexible. I will utilize my full strength and knowledge to work for the success of that company using my technical skills. I believe in Hard work as well as in Smart work.

Professional Qualification :
Master of Business Administration (M.B.A.)- Marketing (major) & Finance (minor) from “Punjab Institute of Management & Technology, Mandi Gobindgarh (Punjab) affiliated to “Punjab Technical University, Jalandhar”.

Professional Experience (2-3 yrs)
SEL Manufacturing Co. Ltd
A listed integrated textile company manufacturing & exporting readymade garments, knitted fabric, cotton yarn , terry towel, hospitality, aviations, power & technical textiles with annual turnover of Rs.2300 Cr (approx.)
Designation : Supervisor
Reporting To : Finance Manager
Work Responsibilities :
To handle the all Accounts payable section working with SAP
Preparation of Cheques/RTGS in SAP
Payment of Electricity bills, EPF, ESI on time to time
Salary/Wages & Conveyance Reimbursements payments through cheques
Monitoring the outstanding debit balance and intervening for the settlement of debit balance
Handle internal queries of payment or any discrepancies of payments Deal with banks.
Complete documentation and vendor reconciliation
Responsible for bank reconciliation and other banking process.

Previous Employer :
ORGANISATION : Odin Health Care Pvt. Ltd.
DESIGNATION : Assistant Accounts

Professional Training :
Market Scenario of Fancy Yarn in Ludhiana (Nahar spinning mills)

Computer Literacy :
Familiar with accounting software tally ERP, SAP (FI module) and MS Office and e-Networks.

Industrial Visits :
Verka Plant, Patiala, Punjab.
Bharatam TMT, Mandi Gobindgarh, Punjab.
Nahar Spinning Pvt. Ltd.

Personal Information :
Date of Birth : 11th Dec, 1986
Father name : Sh. Bishi Ram Chandel
Nationality :Indian
Marital status : Single
Language known :English, Hindi

Declaration :
I hereby declare that the above-furnished information is correct up to my knowledge and belief.
Date :
Place :
(Lalit Chandel)

[Unregistered]

Resume
Annada Prasad Panda
Email :appanda123 AT rediffmail.com

Objective :- To build, lead, manage a team and strive towards excellence while ensuring
growth for self and organization.

Professional Synopsis :
Offering nearly 13 years of manufacturing experience in Injection Molding of
Engineering & Commodity plastic. Abilities in heading various disciplines like Product
Development, Process Improvement, Manufacturing Operations and Quality. A change
agent skilled in repositioning organizations to achieve operational and manufacturing
excellence. An enterprising leader with abilities in leading multi-skilled motivated teams
to achieve organizational goals / objectives by using the industry best practices. Currently
handling a team of 130 persons including Assistant Manager, Sr. Engineer and Engineers.

PRESENT WORKING EXPERIENCE :
Designation & Duration : - Manager Moulding in STARION India Pvt Ltd,
Greater Noida. Cont. from Feb.2012

STARION (Korean MNC), World leader in manufacturing Complete Commercial Washing
Machine, Refrigerator, Evaporator, Heat Exchanger, Vacuum Forming, Mobile parts &
Steering wheel. STARION also engaged in manufacturing of high precision Injection molded
plastic parts for LG & Onida. Established operations across the world and have 11 Group
companies in Asia and Europe.

Managing entire Production activities involving working out various requirements with respect to manpower & monitoring overall 28 Moulding Machines operations for ensuring timely completion of Targets.
Planning daily strategies, budgets & production schedules along with resource allocation, daily Machine loading & Production Plan as per dispatch plan.
Adopt in establishing corporate goals, short term & long term budgets and developing
Business plans for the achievement of factory targets
Ensuring complete in-process quality control and continuous improvement in process capabilities through waste elimination, cycle time reduction, VA/VE activities, etc.
Eliminating capacity constraints studying and combining in-house operations-developing outsourcing of bottleneck and promoting multi-skills.
Quality improvements (First Time Pass Ratio, Rejection, Rework) through process flow, operators' education and awareness, operator self-inspection, work simplification etc.
Spearheading manpower recruitment, training & development, performance reviewing, grievances handling, etc. to ensure harmony in working environment
Breakdown analysis as well as rendered troubleshooting & technical support
Looked after daily quality and undertook functions relating to dispatch analysis.
Administered availability of all required resources viz. machine, equipment, spares & tools while ensuring timely maintenance & repair of faulty equipments/machines to avoid losses.

PAST WORKING EXPERIENCE :
Designation & Duration : -Assistant Manager in Moser Baer India Ltd
An ISO 9001, ISO 14001,OHSAS 18001,SA 8000 certified company

Areas of Expertise :
As Hall Incharge (Assistant Manager Production) from June 2000 to Feb.2012
Overall handling production & process control of 32 JSW & 64 NETSTAL Moulding
Machine for achieving Production Targets & Presenting the monthly Production report
to Top management.
Leading a Project for Plant shifting with a team of 65 peoples including team from
engineering, production, maintenance & quality.
Studying the day to day process and making improvement plan accordingly, for
Optimum utilization of Man / Machine / Material.
Maintaining the OEE, Efficiency & utilization through conducting the morning meeting.
Conducting manufacturing process and product audits to ensure the implemented
counter measures & prepare all document, control procedures.
Cost reduction through continuous cycle up,Set up time reduction & material utilization
Performance Review of subordinates & enhancement plan, Skill up gradation through
skill Mapping & ensuring Training of subordinates.

As Shift Incharge (Sr. Engineer) Oct.2005 to Sept.2009 :
Independently handling all shift activities of 179 Injection Molding Machine .
Rejection, down grade analysis & effective counter measure in CFT meeting.
Analysis of trouble shooting process, mold & machine problem.
Give day-to-day technical support for break down diagnostic & preventive Action
including risk analysis.
Coordinating with different department for sorting out daily issues.
Monitor & Analysis of Production, Rejection, OEE on daily basis.
Take the skill test & make the plan to improve the skill of all engineers.
Daily monitoring efficiency of engineer.

As Module Inchange (Jr. Engineer – Engineer) June.2000 to Sept.2005 :
Daily Injection achieving.
Rejection, down grade Reduction.
Proactive action for maintaining & improving Productivity.

As Six Sigma Project Leader :
Six Sigma GREEN BELT Project complete as team in 2 projects-Disc weight reduction & Moulding alarm reduction, Use DMAIC as a methodology in Green Belt Projects.
Monitoring & controlling different other six sigma projects as coordinator.

As Member of Kaizen :
Cycle time reduction by modification in Heating/Cooling system.
Continuous improvement of Productivity & OEE & looking -5S, TPM, MULTISKILL, KAIZEN activities.
Development of alternative source for cost reduction
Conducting trials of new parts / moulds.

PAST WORKING EXPERIENCE :
Designation & duration : - Production Engineer, from Aug.99 to June 2000.Company
profile : -M/S VIMAL MOULDER (I) LTD. is an ISO9002 certified company manufacturing
TV cabinet for Sony, Panasonic, konka, LG, and also a leading manufacturer of garden
furniture.

As Shift Engineer August.1999 to May. 2000 :
Independently shift handling
Production planning & control
Conducting trails of new moulds.

Decision making on acceptance and rejection.
In process quality inspection & on line packaging.
Motivating workers to maintain quality standard of company.
Manpower handling.

TECHNICAL COMPENTENCY :
Machine - Injection moulding machines from
LG-LS-(220 TO 2500 T),
Kawasaki-(250 to 850 T)
TOSHIBA-(550 to 850 T)
CLF (600 to 1420T),SUMITOMO-SD 30, JSW-J40 EL-III DK, NETSTAL DISC JET600,
ELECTRONICA,WINDSOR,MANIKLAL & ENGEL-EC88.
Mould – All types of single & multi cavity moulds, Gas assisted mould, hot runner mould, large mould for TV cabinet, furniture & washing machine, hydraulically actuated core mould & CD-R moulds.
Material - PC, PP, PS, ABS, HIPS, HDPE, NY-6, PMMA, PVC.

ACHIEVEMENTS :
Mould change time Reduced from 40 min to 15 min in 850 ton M/C
Molding Scrap Reduce from 1.3% to 0.7%.
145.8 Lacks savings as validated by accounts from 2 Green Belt Projects.
50% reduction of mould maintenance down time.
Successfully achieved 1% from 6% on project of stamper damage by sprue.
Developed Sprue bush, nozzle, & mould parts & reduced 60% spare cost

TRAINING :
Training on Yellow & Green Belt in Six Sigma (tqmi Certified by Motorola University).
Level one Trainer Certified by WCH Solutions, Training on Conflict Resolution, Supervisor Development, Motivation, Stress & time management.
Training given by BAYER on process optimization.
Training on ISO, OHSAS, SPC, FMEA, Quality Tools.
Perfect Planning & flawless execution, Achieving & winning with people by Anil Bhatnagar (the Corporate Trainer with International Appreciation)r

ACADEMIC CREDENTIALS :
MBA with specialization in Operation Management from IGNOU.
Post Graduate Diploma in Plastic Processing Technology with all India 4th rank in 1999 from Central Institute Plastic Engineering & Technology (CIPET), Bhubaneswar.
Bachelor of Science (B.Sc) First Class with Distinction from Utkal University, Bhubaneswar.

PERSONAL PROFILES :
Date of birth - 10-06-1974
Annada Prasad Panda

[Unregistered]

CURRICULUM VITAE
NEERAJ ASTHANA
Email neeraj_asthanain AT yahoo.co.in
asthanan565 AT gmail.com

PROFESSIONAL OBJECTIVE :
Intend to build a career with an organization that will help me to explore myself fully and utilize my skills effectively willing to work as a key player in challenging and creative environment.

TOTAL EXPERIENCE : 16 YEARS
Present Experience : M/s Lumax Automotive Systems Ltd. Faridabad (Haryana)
Position : Manager Production
Duration : August 2004 to till continue

COMPANY PROFILE :
M/s Lumax Automotive System Ltd. is QS/TS 169492009 Companies. It is wide manufacturer of Plastics Injection & Blow Moulded automotive parts to Maruti Udyog Ltd., Yamaha Escorts, Hyundai Motors, Hero Honda, Honda Scooters & Motor Cycle India Pvt. Ltd. (HMSI) Manesar, Bajaj Auto, General Motors,Hindustan Motors, International Tractor Ltd. etc.

JOB PROFILE :
Production Planning & Execution according to Customers Schedule & D I Systems.
Raw material planning & Reconciliation of them.
Man Power Planning in coordination with H R Deptt.
Responsible of overall day to day Production Operation activities with discussion with team of Engineers & workers.
Costing of Product with action to continuously improve and control cost by focusing on line efficiency, Plant Utilization, rejection & rework, scrap & raw material.
Maintained Inventory level of items & control of them
To ensure the quality of Product through first piece inspection and confirm quality before Production start.
Produce the Product in accordance with Quality Standards which are delivered on time according to sale & D I Systems.
Customers handling with quality related issue & improvement activity with necessary counter measures whenever required.
Conduct training Programme for Engineers, Operators and Casual workers and motivate them for a better working environment.
Implement 5S activity, Safety implementation, Kaizen, FIFO activities and documentation of Production/ System related format and active participation in internal & customers audits for sustain quality systems.
New mould Trials, new product development, mould history, production history and regular maintenance of them.

PREVIOUS EXPERIENCE :
Company Name : M/s Nilkamal Plastics Ltd., Greater Noida (U.P)
Position : Sr.Engineer Production
Duration : March 2003 to August 2004.

COMPANY PROFILE :
Having units in Mumbai ,Silvassa (D&NH), Pondicherry, Barjora (W.B.) Nilkamal Plastics Ltd. is an ISO9001 certified company. It is world No. 1 manufacturer of Plastics Injection Moulded Furniture, Bottles Crates to Pepsi, Coca Cola, Material handling Plastics Crates and bins.

JOB PROFILE :
Handling Shift and manpower planning.
Responsible for over all production operation activity at M/c.with planning.
Process setting, In Process Trouble Shooting and maintain process parameter sheet.
Raw material Planning & Reconciliation of them.
Mould setting, New Mould Trail & Maintenance of them.
Control the quality of Product during processing and control rate of rejection and increase the productivity.
Prepare daily Production report.
ISO System Documentation.

Company Name : M/sToshi Auto Industries Ltd.,Faridabad(Haryana)
Position : Engineer Production
Duration : June 1998 to Feb 2003.

COMPANY PROFILE :
M/S Toshi Auto industries Ltd.is an ISO/QS9000 certified co.It is the manufacture of Plastics Injection & Blow Moulded automobiles parts for Maruti Udyog Ltd,Yamaha Motors,DCM Daewoo,Hyundai Motors Ltd.,HMSI Manesar,Bajaj Auto,ITL Punjab.

JOB PROFILE :
Production planning of plastics parts as per customer requirement.
Independent handling of shift.
Manpower utilization,Raw materials Planning & Reconciliation of them.
Responsible to achive production targets in less wastage.
Improving quality of plastics component during process at m/c..
New moulds trials & process setting of them.
5‘s’ activities,safety implementation and kaizen activity.
Calculation of worker’s & machine efficiency.

Company Name : M/s Precision Tech Enterprises, Gurgaon (Haryana)
Position : Production Supervisor
Duration : Aug. 1995 to June 1998.

COMPANY PROFILE :
M/s Precision Tech Enterprises is an ISO 9002 Company. It is manufacturer of Plastics Injection Moulded automobile parts to Maruti Udyog Ltd. & other automotive companies.

JOB PROFILE :
Shift handling, Process setting, In Process Trouble shooting.
To execute Production Planning at m/c
Man Power distribution and utilization of them.
On Job training for operators and coworkers.
Raw material issue according to Planning
Improvement on Shop floor with 5.S activity, Kaizen & safety implementation.
Daily Production & ISO documentation.

MACHINES HANDLED :
Injection Moulding machine like :
CLF Taiwan 1000T, Cin Cinnati Feromatic Magna775T & 275T MIR Italy, 675T & 300T Windsor –600T, 400T, 350T, 180T, 130T, L & T 100T200T,550T & 350 T, JSW485T & 300T Electronica – 180T, Nang Rong – 140T, Negribossi – 225T, Engle – 80T.

Blow Moulding machine : 5 Ltrs., 10 Ltrs. & 20 Ltrs.

RAW MATERIAL PROCESSED : ABS, PPCP, PPTF, PPGF, HDPE, Nylon, PC,PU,
Poly acetal, PBT, Acrylic, SAN, LDPE, PVC, Noryl,
TPU,EVA.

PROFESSIONAL QUALIFICATION :
Post Graduate Diploma in Plastics Processing & Technology (PGDPPT) from Central Institute of Plastics Engineering & Technology (CIPET) Lucknow, 1995.

EDUCATIONAL QUALIFICATION :
B.Sc (PCM) from Lucknow University 1994.

PERSONAL DETAILS :
Date of Birth : 19th August, 1973
Father’s Name : Late Shri Dinesh Kumar Asthana
Marital Status : Married
Strength : Punctual, Believe in team work and hardworking,
positive attitude and positive thinking.

Date :
Place :
NEERAJ ASTHANA

[Unregistered]

V. KAMALANATHAN
Email :V_kamalanathan AT yahoo.com

Seeking mid level managerial assignments in project management/ business development domestics with an organization of repute preferably in plastic industry

Profile :
A Production dept with a wide range of experience in the Plastic Injection Mounlding Industries. Able to work on own initiative and as Part of a Team. Proven Leadership Skills involving, Managing, Developing and Motivating Teams to achieve their objectives.

Academic Profile :
Academic : B.Sc.,
Voorhees College,
Vellore, Tamilnadu.
Technical : Post Graduate Diploma in Plastics Processing
Technology, CIPET, Guindy, Chennai.

Current Work Summary :
I am currently working with Worth Plastics Private Limited (ISO/TS 16949-2009), Vellore-632 007 (Injection Moulding) division as a Asst.Manager (Production) Since July 27-2011 to till date. They are manufacturing and supplying of Plastic injection moulded engineering components for Auto & Non - Auto sector (BRAKES INDIA LTD, RANE MADRAS LTD, PARRYWARE ROCA PRIVATE LTD.,)

Strengths :
1 Comprehensive problem solving abilities, good verbal and written communication skills, ability to manage with people.
2 Excellent communication and coaching skills at all level of management.
3 Ability to communicate and interact with senior management.

Responsibilities :
1 Responsible for complete Production functions planning, shop-floor control
2 Preparing the production report, rejection details in percentage & efficiencies
3 Handling the Raw materials properly
4 To train the operators and workers
5 Trouble shooting
6 Handling in L&T Demag, HMT, WINDSOR, SUPERMASTER, SIGMA
7 Worked as Team and solve the quality issues.
8 Defect and failure analysis for the rejections and implement solutions.
9 Able to lead supervisors, Technicians, Engineers.
10 Preparing the Process Parameter charts.
11 Preparing the Raw Materials Reconciliation Statement
12 To Check the Job card shift wise, daily.
13 To conduct the training class for Operators and Supervisors.
14 To take the trials new molds,masterbatches, etc
15 Preparation of ISO documents

Past Work Summary :
In past, working as Production Manager (Injection Moulding) in BUTTERFLY GROUP OF COMPANY from (Dec 2003 to June 2011). Product dealt with : TT Body 2 litre, 1.5 litre, Mixie Body, Mixi Base, Cup etc.,

Responsibilities :
16 Preparation of ISO documents
17 Responsible for complete Production functions planning(in-House), shop-floor control
18 Preparing the production report, rejection details in percentage & efficiencies
19 Handling the Raw materials properly
20 To train the operators and workers
21 Trouble shooting
22 Handling in L&T Demag, HMT,
23 Worked as Team and solve the quality issues.
24 Defect and failure analysis for the rejections and implement solutions.
25 Able to lead supervisors, Technicians, Engineers.
26 Preparing the Process Parameter charts.
27 Preparing the Raw Materials Reconciliation Statement
28 To Check the Job card shift wise, daily.
29 To conduct the training class for Operators and Supervisors.
30 Co-ordinate with R&D.

Past Work Summary :
In past, working as Production Supervisor (Injection Moulding) in MAHARISHI SOLAR TECHNOLOGY Pvt.LTD., Chittoor District, A.P. from (April 2001 to November 2003). Product dealt with : Digital Satellite Receiver front plat made of PC, Digital Satellite Receiver Top cover made of ABS.
Responsibilities :
31 To setup the injection moulding machines.
32 Co-ordinate with Top management
33 Handling the Raw materials properly
34 To train the operators and workers
35 Trouble shooting
36 Handling in SUPERMASTER.
37 Worked as Team and solve the quality issues.
38 Defect and failure analysis for the rejections and implement solutions.
39 Preparing the Process Parameter charts.
40 To Check the Job card shift wise, daily.
41 Co-ordinate with Top management

Past Work Summary :
In past, working as Production Supervisor (Injection Moulding) in ASIA PLASTICS in Chennai from Feb 2001 to April 2001. Product dealt with : Ponds cap made of PP, Mixer speed Regulator made of ABS, Spout Mouldings made of PP, Cloth Hangers made of recycled ABS, Tool Box bolt made of POM.
Responsibilities :
42 TO Operate the machines.
43 Trouble shooting
44 Handling in SUPERMASTER.,Windsor

Past Work Summary :
In past, working as Production Supervisor Trainee (Injection Moulding) in PUSHPA PLASTIC in Chennai from Feb 2000 to Feb 2001. Product dealt with : Mirror frame made of LDPE etc.,
Responsibilities :
45 TO Operate the machines.
46 Trouble shooting
47 Handling Windsor,sigma

Achievements (Working) :
1 To reduced the Cycle times to improve the output. The following components.
1. Blended jar
2. Cascade seat cover.
3. Tuff mate seat cover.
4. Grinder body 2 litre.
5. Solid seat cover

Materials Processed :
1 ABS, Delrin, HIPS, POLY ACETAL, PP, HDPE, SAN, PC,NYLON (Virgin & Glass Field) . ACRYLIC, LDPE.
System Knowledge
1. ISO/TS 16949-2009 Qualify Management System.
2. 7QC Tools
3. Kaizen improvement system
4. POKA-YOKE Error Proofing System
5. 5 S Work place improvement System.

Seminar : Rotational Moulding
Different Types : Batch Type Machines, Carousel – Type Machines, Straight Line
Machines, Jacketed Moulded Machine.
Project Work
Quality Control in injection mouldings :

Personal Details :
Father Name : C. Venu Reddy
Date of Birth : 01.04.1975
Marital Status : Married
Sex : Male
Nationality : Indian
Passport No. : J1476175
Expiry date : 08.11.2020
Place of Issue : Chennai.
E-mail :v_kamalanathan AT yahoo.com

Declaration :
I hereby declare that all statements herein are true to the best of my knowledge and belief.

Place : Chennai
Date :27.8.12

[Unregistered]

CURRICULUM VIATE :
SHASHI PAL

OBJECTIVE :
To work in an organization that offer an environment of professional growth in tandem with personal fulfillment.

ACADMIC QUALIFICATION
** 10th From H.P. Board Of School Education Dharamshala in 1998.
** 10+2 From H.P. Board Of School education Dharamshala In 2001.
** Diploma in computer software engineering.
** B.Com from IGNOU, in 2013

COMPUTER KNOWLEDGE :
** MS-Office,
** Tally 7.2, and 9.0.ERP with inventory.
** Internet and Networking.

EXPERIENCE :
** Working with M/S HIM METAL PROCESSING PVT. LTD. Parwanoo, as a store incharge from 25 Feb 2005 to 20 Mar 2006
** Working with Elicon Packpet Parwanoo as a store incharge from 21March 2006 to 15 Sep 2009.
** Working with Solchrome System India Limited. Sector -5,Parwanoo, as a store incharge 16 Sep. 2009 To 31 Dec. 2011.
** Working with Microtek Infosoft Limited Sector -5 Parwanoo, as a store incharge from 01Janury 2011 To 31 March2011.
** Working with Esteem Projects Pvt. Ltd. Baddi as a store incharge From 03 April 2011 To March 2013
** Working with Morepen Laboratories Limited. Baddi as a Astt. Store incharge From 1 April 2013 to till date

JOB PROFILE :
** Receiving of Material.
** Preparation of MRN. (Material Receipt Note.)
** Issuance of Material.
** Maintained of stock Register.
** Forward of MRN to Account after completing all formalities.
** Knowledge about ISO Document alive of store records.

JOB RESPONSBILITY :
ACCOUNTS DEPARTMENT :
** Preparation of Invoicing for products in India
** Issuance of cheque’s to venders.
** Maintaining attendance register leaves Records of employees.
** Data entry of all types of expenses.

STORE DEPARTMENT :
** Receiving of Material.
** Preparation of MRN. (Material Receipt Note.)
** Issuance of Material.
** Maintained of stock Register.
** Forward of MRN to Account after completing all formalities.
** Knowledge about ISO Document alive of store records.

LOGISTICS DEPARTMENT :
** Deals with logistic related issues.
** Responsible for dispatch related issues.

PERSONAL PROFILE :
Father’s Name Sh. Surender Singh
Date of Birth 8th Feb. 1981
Sex Male
Nationality Indian
Language Known English, Hindi, Punjabi and Pahari
Material Status Married

DECLARATION :
I Hereby declare that the above information furnished is true and correct to the best of my knowledge and belief.

Date :

Place : Shashi Pal

[Unregistered]

I am Rakesh Kumar. I have completed Diploma in Injection Molding. Please let me know if I am eligible.