www.armech.in Engineers Pvt Ltd Noida : Execution Coordination, Project Engineer

[mskavi]

Armech Engineers [P] Ltd. Noida : Project Engineer
Website: http://www.armech.in
armech.in

Designation: Project Engineer
Experience: 7 - 12 Years
Location: Noida
Industry Type: Construction/ Engineering/Cement/Metals

Job Description:
Specification:-
_ Candidates should capable of doing varied jobs like Project Execution Coordination, Purchase etc.

Desired Candidate Profile:
Skills:
_ Candidate should have 7 Years to 15 years of relevant experience
_ Candidate should have in the age group of 30-40 years.
_ Candidates should have ability to read drawings and strong desire to make quality products

Company Profile:
We are a Hot Rolling Mill manufacturing company working mainly in the area of Bar and Wire Rod Mills.
We manufacture medium sized, Wire Rod Mills, upto 250,000 tpa and Bar Mills upto 350,000 tpa capacity. These mills offer state of the art technology, run efficiently with minimum downtimes, thus offer lower cost of production and deliver close tolerances on the rolled products.
Modernising existing Bar and Wire Rod mills, to increase production and improve product quality is our specialisation. We also manufacture special purpose, custom built equipment for mills.
For Structural and Flat product mills, we manufacture auxiliary equipment like Hot Saws, Vertical Edgers and Down Coilers.
We stand out from our competitors because of our attention to quality and an equally strong emphasis on delivering well engineered equipment. We are also able to adapt the best technologies being used internationally, for such mills, to Indian conditions and price levels.
Our biggest asset is our innovative team of engineers who thrive on new challenges and are obsessive about quality. Though our equipment are not low priced, we offer excellent value for money, and for the price we charge, perhaps, no one can offer a better product.

Address: Armech Engineers P Ltd
C 10, Sector 63,
Noida,UP,INDIA 201301

Email Address: armechengineers@rediffmail.com

Keywords: Project engineer, Project engineers,armech

[Guest-IJT]

CURRICULAM VITAE
SELVAKUMAR. S
Bachelor of Mechanical Engineering
Mail ID : ksselvan.ac AT gmail.com
OBJECTIVE
Seeking a challenging job with an organization that provides ample opportunities to learn and contribute constructively.
QUALIFICATIONS
|Course |Institution |Board/University |Month/Year of Passing |% of Marks |
|B.E MECH |Panimalar Engineering College, |Anna University |April 2010 | |
| |Poonamallee. | | |74.35% |
|XII |Sethu Bhaskara Matric Hr Sec School, |State Board |March 2006 |77.58% |
| |Ambattur. | | | |
|X |Sethu Bhaskara Matric Hr Sec School, |Matriculation |March 2004 |82% |
| |Ambattur. | | | |
TECHNICAL KNOWLEDGE
> AutoCAD
> Pro-E
> Ansys
PROJECT DETAILS
|Title |Finite Element Crack Growth Analysis |
|Software used |Ansys |
|Project Description | This project is based on Analysis of Crack Growth in manned submersible. The crack will occur|
| |due to increasing pressure, deep under the sea about 6000m. So in this project we are calculating the |
| |stress intensity factor for various crack models by considering the quarter portion of the submersible by |
| |constraining it at both the ends by applying symmetry B.C and applying a load of 100Mpa on the outer |
| |surface submersible and finally calculated the life period of the submersible. |
IN-PLANT TRAINING
> Underwent In-Plant Training at ICF (Integral Coach Factory) Perambur, Chennai- 600011.
MINI PROJECT
> Have done a mini project in Design and fabrication of Automatic gear shifting using solenoid valve.
CO-CURRICULAR ACTIVITIES
> Member of Technical Committee for National Level Technical Symposium "IMPACT" held in our College.
> Have won 2nd prize under the event 'ROBO SOCCER' in the national level technical symposium HON-e-KEN'09.
PERSONAL STRENGTHS
> Quick Learner
> Good Team Player
> Good observer and keen listener

[Guest]

RESUME
MD.SHAMIM RAZA

E-mail ID : prince_02mech AT rediffmail.com

OBJECTIVES : Ambition to work in an organization where the best use of my talent, knowledge, dedication, hard work& sincerity can be made. I am seeking high quality work life through challenging assignments, meaningful career growth and opportunity for value addition and professional devlopment
JOB PROFILE; MECHANICAL ENGINEER (QA/QC)
EXPERIENCE : - 2 years+
COMPANY NAME :- KAEFER PUNJ LLOYD LTD
PROJECT :- FUME TREATMENT PLANT
CLIENT :- VEDANTA ALUMINIUM LTD,JHARSUGUDA,ORISSA
DURATION :- 8th DECEMBER 2008 TO 15th JANUARY 2011.

COMPANY NAME :- KAEFER PUNJ LLOYD LTD
PROJECT :- FLUIDIZED CATALYTIC CRACKER UNIT.
CLIENT :- RELIANCE INDESTRIES LTD,REFINARY DIVISON,JAMNAGAR
DURATION :- 15th JANUARY 2011 TO 15th MARCH 2011

COMPANY NAME :- KAEFER PUNJ LLOYD LTD
PROJECT :- FUME TREATMENT PLANT
CLIENT :- VEDANTA ALUMINIUM LTD,JHARSUGUDA,ORISSA
DURATION :- 15th MARCH 2011 TO TILL DATE
DUTIES& RESPONSIBILITIES
- Fabrication & Erection of all types of pipeline ,shell,ducting, in process industries including different diameters of water,gas, Material verification & fit up inspection as per engineering requirements.
- Guiding, controlling, monitoring, supporting, a team of various disciplines.
- Responsible to counter check drawing designed plans before fabrication.
- Conduct plumbness, level checking alignment inspection.
- QA/QC program, project drawing and specification. When defective materials, equimpment or workmanship are found, immediate action to be taken to correct them & to report the the corrective action to the site superimentend.
- Supervision &coordinate with work force in executing job complesetion on time as per work plant and with safety precautions /procedures.
- Conducting through stage wise inspection as per procedures/codes as well as alignment and assembly of equipment at site during installation.
- Planning work execution as per work vender specification /requirement &work target.
- Erection and joining of beams for shift lift platform.
- Coordinating with quality control departments and representing matters with the client.
Ducting, piping & shell
- Preparation of ITP & WPS.
- Conformation of materials& and welding consumables with drawing and codes.
- Qualification of welders.
- Stage wise inspection of welding .(fit up,root pass visual and NDT ,final weld visual& NDT)
- Inspection of heat treatment cycle using WPS ,procedures and codes
- Conducting a detailed study of inspection report & scope of work of each equipment.
- Verification of gasket, flanges, plates (using positive materials identification method) etc.
TECHNICAL QUALIFICATION :
Completed my B.E in Mechanical from MAULANA AZAD COLLEGE OF ENGG & TECH (M.U) , PATNA (BIHAR
B.E with : 72.11 %
Final year : 76.33 %
Third year : 71.66 %
Second year :71.50 %
First year :66.33 %
ACADEMIC QUALIFICATION :
.. Intermediate from Krishak College (BIEC Patna) With 73.66 %

Matriculation from Pakri Brawan High School (BSEB,Patna) With 72.14 %
PROJECT UNDERTAKEN
Heating load estimation and design of central air-conditioning system for conference hall of Maulana Azad College of Engg. & Technology, Patna.

TRAINING : Three weeks industrial training in Feeder Balancing Dairy, Patna Dairy Project, Patna.
: One week training on Primavera Enterprise ver 6.0 from KLG SYSTEL (GURGOAN) This
Company has a professional membership with Project Management Institute (REP.NO-2370)