Instrument Engineer Mumbai : Score Infovision International Ltd

[deepika]

http://www.score.co.in

Experience:
5 - 10 Years
Location:
Mumbai
Compensation:
diploma in Instrumentation Engineer
Education:
UG - Diploma - Engineering

PG - Any PG Course - Any Specialization
Industry Type:
Office Equipment/Automation
Functional Area:
Engineering Design, R&D
Posted Date:
17 Jun

Job Description
Supervising preventive & breakdown maintenance of field instruments & plant control system (Siemens Simatic S7, PCS7 and Wincc).
Supervising modifications to plant systems.
Planning & execution in relation to new projects including preparation of instrument specifications.
design, procurement, installation & commissioning of equipment, preparation of wiring diagram,
Preparation of I/O lists and logic development
Preparing calibration schedule and supervising calibration of instruments.
Desired Candidate Profile
Diploma in Instrumentation Engineer.

5 10 years with

Experience in handling field instruments like SMART instruments, MFMs, analysers etc.
Exposure to handling projects (procurement, installation & commissioning of equipment)
Experience in maintaining PLC systems, preparing I/O lists, logic development.
Handling vendors independently
Exposure to plant utility systems like compressors, boilers, chillers etc.
Company Profile
GERMAN BASED MNC - Chemical Company

Read CLINT of Score Infovision International LTD Blog
Contact Details

Company Name:
CLINT of Score Infovision International LTD

Website:
http://www.score.co.in

Executive Name:
HR

Address:
Kankaria Group
Kolkata - West Bengal ,INDIA 700016

Email Address:
rakhi.sil@scope4u.com

Telephone:
91-033-22178303/05

Reference ID:
Instrumentation Engineer

Keywords: Engineer

[Guest-IJT]

Respected Madam/Sir,

With ref to your advertisement in one of the jobsite, regarding job opening for Piping Engineer. I am forwarding my resume for ur further process.Currently i am working in Pune. I am having 3 years Exp. in piping field for Oil & Gas, Petrochemical, Chemical & Power industries. I hope that my profile would match your requirements.
I am looking for ur favourable reply.
Current Location: Pune
Current CTC : 3 Lakhs P.A.
Expected Salary: Negotiable
Preferred Location : Any where in india

Thanks & Regards
Swapnil Stavekar
09960268987
CTC : 3 LACS
EXPECTION : 30 % HIKE
CURRENT PLACE : PUNE

RESUME

SATAVEKAR SWAPNIL GANPATRAO
- Present Address : C/O : Kailas A. Pawar Contact No: 9960268987( M )
“Chandrey Niwas”,
Dalvi Nagar, B.T.Kawade Road,
Mundwa,Pune-36.
- Permanent Address: C/O, 224,3-Indirangar,
Behind Boudh Mandir,
Near Tabela, Hariyali Village,
Vikroli(East),Mumbai-83
Email-id: swapnil_satavekar AT yahoo.co.in

Experience 3 years
CAREER OBJECTIVE:

I am self-motivated, quick learner also willing to work, learn and accept new challenges, learn skills and built up knowledge with team effort to help organization in achieving their goals.

Work Experience:
1) Presently working in a UHDE INDIA PVT.LTD as a Stress analysis engineer in PLANT DESIGN DEPARTMENT.
2)Piping Stress Analysis Engineer - UHDE INDIA PVT.LTD. Pune
UHDE INDIA PVT.LTD is one of the leading company and having various other world wide offices. UHDE INDIA PVT LTD Pune is India's premier international engineering consultancy organization.
Duration: June 2006 to Till date

Designation : Executive Level 1 (Piping stress Analysis)
Projects Experience: 1) NEW MULTI-PRODUCT PIPELINE PROJECT (SOUTH AFRICA)
Responsibilities : i) Identifying the Stress critical lines from the P&ID and line list as per the Stress Specification. Preparing the Stress Critical Line list.
ii)Stress Analysis(Caesar 5.0) of the Critical systems for the various units in the plant.
iii) Responsible for establishing Load cases for Seismic Analysis, Wind Analysis, Hydro test Load cases, and PSV analysis load case philosophies.
iv) API 650 Tank Nozzle Load check, API 610 Pump Nozzle load check.
v)Preparation of Spring Hanger Schedule.
VI) Preparation of Support Load Data and passing the same to Civil.
vii) Preparing the initial Load data for the design of racks.
viii) Submitting Stress Analysis Reports to the Client and getting their approval
ix) Preparation of Special support sketches for critical lines.
x) Support selection for small bore (< 2”) high temp line without computer analysis.
Xi) Co-ordination with the other Engineering Departments.

Projects Experience: 2) IOCL GUWAHATI MSQ (ASSAM)
Responsibilities : i) Identifying the Stress critical lines from the P&ID and line list as per the Stress Specification. Preparing the Stress Critical Line list.
ii)Stress Analysis(Caesar 5.0) of the Critical systems for the various units in the plant.
iii) Responsible for establishing Load cases for Seismic Analysis, Wind Analysis, Hydro test Load cases, and PSV analysis load case philosophies.
iv) WRC 107 check, API 610 Pump Nozzle load check.
v)Preparation of Spring Hanger Schedule.
VI) Preparation of Support Load Data and passing the same to Civil.
vii) Preparing the initial Load data for the design of racks.
viii) Submitting Stress Analysis Reports to the Client and getting their approval
ix) Preparation of Special support sketches for critical lines.
x) Support selection for small bore (< 2”) high temp line without computer analysis.
Xi) Co-ordination with the other Engineering Departments.

Projects Experience: 3) BONGAIGAON REFINARY & PETROCHEMICALS LTD. AASAM (MSQIP)
Responsibilities : i) Identifying the Stress critical lines from the P&ID and line list as per the Stress Specification. Preparing the Stress Critical Line list.
ii)Stress Analysis(Caesar 5.0) of the Critical systems for the various units in the plant.
iii) Responsible for establishing Load cases for Seismic Analysis, Wind Analysis, Hydro test Load cases, and PSV analysis load case philosophies.
iv) WRC 107 check, API 610 Pump Nozzle load check.
v)Preparation of Spring Hanger Schedule.
VI) Preparation of Support Load Data and passing the same to Civil.
vii) Preparing the initial Load data for the design of racks.
viii) Submitting Stress Analysis Reports to the Client and getting their approval
ix) Preparation of Special support sketches for critical lines.
x) Support selection for small bore (< 2”) high temp line without computer analysis.
Xi) Co-ordination with the other Engineering Departments.

Projects Experience: 4) IOCL VADODARA VGO-HDT (UNIT-2093) (GUJRAT)
Responsibilities : i) Identifying the Stress critical lines from the P&ID and line list as per the Stress Specification. Preparing the Stress Critical Line list.
ii)Stress Analysis(Caesar 5.0) of the Critical systems for the various units in the plant.
iii) Responsible for establishing Load cases for Seismic Analysis, Wind Analysis, Hydro test Load cases, and PSV analysis load case philosophies.
iv) WRC 107 check, API 610 Pump Nozzle load check.
v)Preparation of Spring Hanger Schedule.
VI) Preparation of Support Load Data and passing the same to Civil.
vii) Preparing the initial Load data for the design of racks.
viii) Submitting Stress Analysis Reports to the Client and getting their approval
ix) Preparation of Special support sketches for critical lines.
x) Support selection for small bore (< 2”) high temp line without computer analysis.
Xi) Co-ordination with the other Engineering Departments.

Designation : Executive Level 1 (Piping Layout)
Project – 5)EPPC(Egyptian Propylene-Polypropylene Company)
Job Involves: Piping Study & PDMS Designing
- Prepared Piping Isometrics and Checking of Piping Isometrics Drawings
- Modeled in PDMS with referring the P&ID Drawings.
- Prepared The proposed MTO of AL-Alkyl Area, Blower Area,
- Homogenization Area.
- Prepared The order MTO of Al-Alkyl Area & Blower Area.
- Prepared The Equipment Trim MTO of Homogenization Area.
- Preparing Isometric Drawing from Piping GAD with final MTO.
- Preparation of line list with reference to P&ID.

Familiar with Codes and Standards like ASME, other valve and Pipe Fittings.
SOFTWARE SKILL:-
1) CAESAR 5.0
2) PDMS

EDUCATIONAL DETAILS:
B.E. Chemical Engineering (2006 batch) with 65.19% from Shivaji University Kolhapur
Other Certification: Post Graduate Diploma(2006) in Pipe Design & Engg. from Vishwkarma Institute Of Technology-Pune

PERSONAL DETAILS:
Name : Swapnil Satavkar
Date Of birth : 20/2/1984
Sex : Male
Marital status : Single
Language Known : Marathi, Hindi & English
Passport No : G1389097
Place Of Issue : Pune
Date Of Issue : 23/01/2007
Date Of Expiry : 22/01/2017

Declaration:
I vouch for the authenticity of the above-mentioned facts.

Date: Mr.Swapnil Ganpatrao Satavekar