www.sgs.com India Pvt Ltd Bangalore, Kolkata : Process Engineer

[Rajkumargautam]

SGS India Pvt. Ltd Bengaluru/Bangalore, Kolkata : PROCESS ENGINEER
sgs.com

Designation: PROCESS ENGINEER
Experience: 3 - 8 Years
Location: Bangalore, Kolkata

Job Description:
Process Engineer on full time basis for planning and executing jobs related to Process plant Efficiency Testing, Improvement projects for Minerals Processing plants, Process plant design auditing and plant operations etc.

Desired Candidate Profile:
• Experience in Process Engineering review of plant circuits and operational practices,
• Plant performance testing and evaluations,
• Design of monitoring, blending, and sorting facilities that help maximize plant yield.
• Experience in pilot plants and process simulations
• Coal preparation plant testing
• Should be fluent in written as well spoken English

Company Profile:
SGS is the world’s leading inspection, verification, testing and certification company. With more than 53,000 employees, SGS operates a network of over 1,000 offices and laboratories around the world.

SGS India:
Founded in 1950, SGS India now employs more than 3300 highly motivated, multi-disciplined professionals and utilizes some of the most sophisticated communication network. With years of local experience and a vast network of offices and laboratories, SGS India offers high level expertise in the testing, verification and inspection of products from a wide range of industries.

SGS INDIA PRIVATE LIMITED
4B, Adi Shankaracharya Marg
Next to Powai Telephone Exchange
400 083 Vikhroli(West), Mumbai
India

Website: http://www.sgs.com
Keywords: Minerals Processing, Mining , Metallurgy

[Guest]

PARAM JEET SINGLA

Email : - paramengg AT in.com
singla.engineer AT gmail.com
INTRODUCTION
Can handle double the workload and able to manage pressurised situations easily.
OBJECTIVE
Looking to work under an organization where I can truly utilize my knowledge, Explore my capabilities, skills, sense of dedication towards my duties with sole aim of seeing the progress of organization, gain worldwide experience and training by interacting with more and more people without any time constraint.
ACADEMIC RECORD :-
¦ B.Tech. in Mechanical Engineering with 68% aggregate marks.
¦ Have done 10+2
From Punjab School Education Board Mohali in Medical (additional Maths) in Session -2007 with 72% marks in medical and 68% marks in non-medical.
¦ Have done Matriculation
From Punjab School Education Board Mohali in Session -2005 with 85% marks.
INDUSTRIAL TRAINING :
- Attended 6 weeks indusrial training in K.W. Rims Pvt Ltd (where worked on Manufacturing of Bi-Cycle Rims)
- Attended 6 months industrial training at JAGAT JIT AGRO INDUSTRY, CHEEMA MANDI SUNAM, Where Worked as Trainee Production Engineer.

PROJECTS UNDERTAKEN :
- Cavitation Erosion Testing of Ferrous and Non-Ferrous Materials.
- Doing work on hybride engine.
- Doing work on kitchen waste producing cooking gas plant.
EXTRA CARICULAR ACTIVITES
- Presented lots of seminars Hybride Engine during B.Tech in L.C.E.T Ludhiana (Punjab)
- Participated in events like Group Discussion, Paper presentation, Chess and various other events in our college at various occasion.
- Coordinator for S.A.M.E. Club working in our college.
- Coordinator for various events occur on college.
- Attended the national conference on “Recent Trends in Mechanical And Automobile engg.”
- Attended a seminar on Entrepreneurship held in L.C.E.T.
COMPUTER EXPOSURE :
- DESIGNING : Having knowledge of CADD, SOLIDWORKS And PHOTOSHOP
- APPLICATIONS : MS-OFFICE,Manage internet.
SOFT SKILLS :
Some of the soft skills, which I would like to demonstrate and enhance in future as well, are as follows :
1. Hard Working
2. Willingness to learn and contribute
3. Good Team Player
WORK EXPERIENCE :
Three months experience as Assistant Purchase Manager in a leading Mig Wire manufacturing company named as Shakunt Enterprises Pvt. Ltd. Making mig wire with the name Sanwalka Mig Wires.

HOBBIES :
- Playing and watching Cricket.
- Travelling
- Singing
- Listening to music
- Reading books and magazines
- Reading thoughts
- Interest in various practical works
- Interest in surveying of various mechanical industries
- Surfing on the internet

[Guest]

Adarsh L.J s
E-Mail : adhi_bright6 AT yahoo.com
E-Mail : adarsh.lj1986 AT gmail.com
SUMMARY
A Chemical Engineer with Experience in Process Engineering for Pharma Industry.
Some of the areas of proficiency include :
- Development of process engineering sizing of Cooling towers, Chiller, Boiler,
Condensers and insulation thickness for project use.
- Conceptual layout development
- Development of Equipments specifications such as Pressure Vessels, Tanks, Heat Exchangers.
- Process equipment / Instrument sizing.
- PFD (Process Flow Diagram) and P&ID (Piping and Instrumentation Diagram) development.
- Coordinating with other departments like Electricals, Piping, HVAC for Commissioning of Plant.
PROFESSIONAL EXPERIENCE
M J ASSOCIATES (I) PRIVATE LIMITED
Project Engineer (April 2010 – June2011)
- Independently handled process engineering for Pharma Industry across India.
- Preparation of all the pre-order stage basic engineering, documentation, costing and estimation for Green filed Plants.
CLIENT : GLAND PHARMA PVT LTD – MALLUR (INDIA)
Duties & responsibilities :
- Mass balance, water balance.
- Equipments, pumps and line sizing.
- Developing an Equipment Layout.
- Sizing the utilities for the plant which includes
1) Boiler Sizing.
2) Cooling Tower Sizing.
3) Chiller Sizing.
4) Air Compressors.
5) Process Water requirement
CLIENT : SEQUENT PENEM PVT LTD – BANGALORE (INDIA)
- Developing specification such as pressure vessels, heat exchangers, tanks.
- Developing P&IDs.
ACADEMIC CREDENTIALS
2009 Bachelor of Technology - Chemical Engineering from M.S Ramaiah Institute of Technology-Bangalore. Secured 64.12%
2005 Higher Secondary Certificate from Board of Intermediate Education Basaveshwara P U College Secured 50.7 %
2003 Secondary School Certificate from Board of Secondary Education, Southern convent High School- Bangalore. Secured 59.6%


ACADEMIC PROJECT
During B.Tech :
Title : Life Cycle Assessment of Bio-Diesel.

Duration : Jan-May 09
Synopsis : The project has been taken up at center for studies of science technology and policy .The
Project defines sustainability and sustainable cyclic process and quantifies the degree
Of non-renewability of Bio-diesel produced from industrially grown Jatropha curca L.
ACADEMIC ACHIEVEMENTS
- I have undergone an Industrial Training for 11 days in Mangalore Refinery and Petroleum, Mangalore.
- I have undergone an Industrial visit for 2 days in O-BASF (Chemical Company), Mangalore.
- I have undergone an Industrial visit for 7 days in BINANI ZNIC (Chemical Company), Cochin .
PROCESS DESIGN ENGINEERING AND PIPING LAYOUT ENGINEERING COURSE
Process Design Engineering :
Project work done on Well Fluid Separation and Crude Oil Processing as a part of my course work.
This includes
a. Well head platform Simulation to arrive Gas Oil ratio and Composition of well fluid at well head platform operating conditions using HYSYS
b. Crude Oil processing using HYSYS
c. Line sizing and Hydraulics calculation using API codes
d. Pump head and power calculations
e. Preparation of Process flow diagram, Piping and Instrumentation diagram according to standard piping and instruments symbols and specification.
f. Relief valve sizing using API codes.
Piping Layout Engineering :
This includes
a. Study of types of pipes, fittings, valves their P-T ratings and their applications.
b. Drawing process and piping equipments like Plan view, Elevation view, Right end view, Left end view
c. Preparation of isometric drawings using P& ID and reading General Arrangement drawings.
SOFTWARE SKILLS
- Familiar with steady state simulation in HYSYS.
- Having exposure on Rectangular and isometric drawings in AUTO CAD.
- Having exposure on International design codes & dimensional standards API, ANSI/ASME codes.

[Unregistered]

M. Ushakiran
Bangalore, India-560047
Email-ushakiran.mula AT gmail.com

Objective :
To contribute to the success of the organization and achieve professional growth by utilizing my technical skills and abilities, through innovative and challenging work

Professional Competencies :
Experience in equipment design and process development such as PFD, P&ID and datasheets
Skill in handling process flow circuits, process parameters and distributed control system.
Experience in onsite process control and monitoring.
Proficiency in managing start ups and shut downs of plants
In depth knowledge of all process design safety requirements, including HAZOP.

Employment History :
Hindustan Dorr Oliver Limited, Mumbai/Bangalore :
Design Engineer : Process/Proposal Engineer (June 2011 - to date)
Work on EPC project design involving the following-

1.Technical & Engineering Services of multiple projects with different clients in Minerals like Copper/Iron/Zinc/Alumina Refinery, Lime Plants.
2.Basic and Detailed Engineering Package (BEP).
3.Preparing deliverables like Mass Balance, Piping and Instrumentation Diagrams (PID) Unit sizing, Hydraulics, Pipe Sizing calculations and Pump calculations, datasheet, Linelist, Instrument Process Datasheet, Equipment list, Motor list, Document Control Index.
4.Preparation of Instrument/Control Philosophy for whole plant so as to provide guidance to PLC engineer in developing logic as per this.
5.Discussion with vendor for technical Details and closure.
6.Preparation of Technical Proposals in line with client requirement which involves study of tender documents, Process Description. Design Basis, Scope of Work, Battery limits, and Technical details of various departments like civil, electrical and piping.
7.Co-ordination for engineering issues (Process related) among various departments of the organization for better and smooth execution of projects.

Hindustan Zinc Limited, Vedanta PLC Dariba Zinc Smelter, Rajasthan
Process Engineer - Process (June 2009 - May 2011)
1.Process development and controlling process parameters as per specification range in Cellhouse Production of Zinc (Electrolysis Process)
2.Managing distributed control system and process flow circuits in control room.
3.Production planning and achieving production targets.
4.Maintaining the product quality and monitoring equipment health and maintenance.
5.Handling the start-up and shutdowns of the plant.
6.Managing safety and environment aspect

Hindustan Zinc Limted, Chittorgarh, Rajasthan :
Internship (Jan – June 2009) :
Participated in project to reduce the size of particles of copper dross to 80% finer than 75 microns to achieve better rate of leaching. Achieved this by leaching the grounded copper dross with cuprammonium carbonate to extract copper.

Technology Skill Sets :
Application Software : MS Office, SAP end user.
Conversant with simulation software like Hysys & Aspen.

Education :
1. M.Tech (Chemical), Birla Institute of Technology & Science, Pilani (2009) - 80%
2. B.E. (Chemical), L.D College of Engineering, Gujarat University (2007) - 74%
3. Ankur High School Gujarat Board (2003) - 70%
4. SSC Little Flower High School Gujarat Board (2001) - 83%

Academic Achievements :
- Attended CHEMCON-2006 organized by Ankleshwar Regional centre at GNFC LTD.Bharuch

Industrial Training :
- Undergone training in SANOFI-AVENTIS, a Pharma Company, at Ankleshwar during 19/12/2005 to 09/01/2006 was placed in API –I, II warehouse plants.
- Undergone training in DEVARSONS Industries Pvt Ltd. At G.I.D.C Ahmedabad during 12/6/2006 to 03/7/2006 was placed in Utility Section.
- Industrial Visits at AEROTHERM Engineers, Vatva Ahmedabad.
- Industrial Visit at IFFCO kalol in Ammonia Plants

Personal Particulars :
Date of Birth : 18 February 1986
Languages : English, Hindi, Gujarati and Telugu

Declaration :
I here by declare that all the information given above is true to the best of my knowledge.