-
June 13th, 2009, 01:34 PM
Post Count Number #1
www.rane.co.in Brake Lining Ltd Hyderabad : Maintenance Engineer
Rane Brake Lining ltd., Hyderabad / Secunderabad : Engineer / Sr. Engineer - Maintenance
rane.co.in
Designation: Engineer / Sr. Engineer - Maintenance
Experience: 3 - 7 Years
Location: Hyderabad
Job Description:
Should be well versed in maintenance aspects in manufacturing environment of plant machinery. Knowledge on Hydraulics, Good communication skills, ability to trouble shoot and bring down brake down time with 4 to 6 yrs experience
Desired Candidate Profile:
Should be DME with 5 to 7 yrs experience or B.Tech with 3-6 years experience, good communication skills, ability to machinery trouble shooting
Company Profile:
In Chennai, Hyderabad, Pondycherry and Trichy, they manufacture of Brake Linings for all type of vehicles. looking for professionals who are skilled in maintenance and who can relocate immediately
Website: http://www.rane.co.in
Keywords: Maintenance, PED,Plant Engineering
Last edited by muthukalee; October 22nd, 2011 at 03:17 PM.
-
July 15th, 2011, 01:13 PM
Post Count Number #2
KESAVAN P
E -mail : apkesavan AT gmail.com
Objective :
Seeking a position where my knowledge can be shared, utilized, enriched and where I can exhibit my talent in the industry. I would like to have an opportunity to contribute effectively for the growth of the organization I work for, which I am sure, will in turn contribute to my personal growth.
Academic Details :
- Bachelor of Engineering in Mechanical stream,Sri ram Engineering College, Anna university-Chennai, April 2011, 75.74 % Aggregated (Distinction with honor).
- Higher Secondary Course in State Board, Suyambulingam Higher sec School, March 2007, GPA 78.66 %
- Secondary School Leaving Certificate in State Board, HNUC High School, March 2005, GPA 84.60%
Project Work :
1. Productivity improvements of cover sealed brake for TAFE’s suppliers,
(By using of Takt time & Cycle time application)
Company : TAFE (Tractors and Farm Equipment Limited)
Department : Material procurement
2. Design of drive pulley using belt tension & power calculations
Company : LARSEN & TOUBRO LIMITED
Division : Engineering, Construction & Contracts Division
Department : EDRC-MMH (Material Handling Department)
In-plant Training Details :
Industry Name : Neyveli Lignite Corporation Ltd
Plant Name : Thermal Power Station –I Expansion
Duration : One Week
Area of Interest :
Power Plant Engineering
Extra- curricular Activities :
- Participated in National Level Technical paper presentation on
“ADVANCE IN AUTOMATION” at AISSMS COE, Pune
- Participated as an active volunteer in NSS Special Camp, Medical Camp and Blood Donation camp
Hobbies :
- Playing Cricket
- Tamil Verse Writing
Personal skills :
- Quick Learner
- Can be adapt any kind of working environment
-
November 26th, 2011, 02:18 PM
Post Count Number #3
Resume
CURRICULUM VITAE
M.Bala subramanian.
Email : bsubramanian95 AT yahoo.com
CAREER OBJECTIVE :
Seeking a position to utilize my skills and abilities in the Industry that offers professional growth while being resourceful, innovative and flexible.
EDUCATION QUALIFICATION :
- B.E in Mechanical engineering (2007-2011) from P.E.T.ENGINEERING COLLEGE with 73.75% aggregate.
- Higher secondary (2006-2007) in CONCORDIA HIGHER SECONDARY SCHOOL with 71.5% aggregate.
- S.S.L.C (2004-2005) in CONCORDIA HIGHER SECONDARY SCHOOL with 82.8% aggregate.
PROJECT PROFILE :
MINI PROJECT
- Title :Design and fabrication of automatic street light.
- Description : We have design the Automatic street Light by using of Photo sensor it will give signal while the light is going dim or in clouding time .It will be very much useful in all areas.
FINAL YEAR PROJECT
- Title : Design and analysis of Wind Turbine Blade
- Description : Now a day wind turbine blades were facing lot of failures. So overcome this project is to design the turbine blades with the composite materials .Designed and Analyzed using CATIA & ANSYS software
WORKING EXPERIENCE :
FURN TECH : Production Engineer Trainee at 4months.
PROJECT : WIDTH&GAP INSPECTION MACHINE for piston ring.
ACHIEVEMENTS :
- Paper presentation for an intra college technical symposium.
TOPIC : WINDMILL POWER GENERATION.
EXTRA CURRICULAR ACTIVITIES :
- Undergone in-plant training in Vijayam InstituteOf Technology ,Nagerkovil FOR ONE WEEK.
- Undergone in-plant training in Southern Railway,Trichy FOR TWO WEEKS.
- Undergone Industrial visit to ISRO.
- Undergone industrial visit to ETA .
-
November 27th, 2011, 11:19 PM
Post Count Number #4
ohan lal resume
SOHAN LAL
Email ID-sameer261 AT ymail.com
………………………………………………………………………………
CAREER OBJECTIVE :
- To work in cumulative growing company & attain a position in the technical field where my analytical and technical skills can help to improve the company’s profitability.
ACADEMIC QUALIFICATION :
- Higher Secondary from NIOS .
- High school in from NIOS.
PROFESSIONAL QUALIFICATION :
- 2 Year engineering course from ITI (Arab ki Sarai) at Nizzamuddin Delhi
- Diploma in Electrical Engineering from IASE University
INTEREST :
- Music, Interacting with People, Cricket.
STRENGTHS :
- Hardworking, Time Management, Result Oriented & Good Interpersonal Skill.
-
February 3rd, 2012, 12:22 PM
Post Count Number #5
resume of mohan raj
RESUME
KORLANA MOHAN RAJ
E-mail : kmraj236 AT gmail.com
CAREER OBJECTIVE :
To pursue a challenging career and be a part of a progressive organization that gives scope to enhance my knowledge, skills and reach the pinnacle in this field with sheer determination, dedication and hard work.
EDUCATIONAL QUALIFICATION :
Course Duration College / Institute Division
B-TECH (EEE) 2007 - 2011 Raghu Engineering College 63.5%
INTERMEDIATE 2005 – 2007 Vikas Jr. College 76.3%
SSC 2005 Visvodaya High School 76.0%
TECHNICAL SKILLS :
- PROGRAMMABLE LOGIC CONTROLLER (PLC)
- PROGRAMMING LANGUAGES : C AND C++
- MS OFFICE
PROJECT UNDERTAKEN :
Project Title : POWER GENERATION AND DISTRIBUTION IN HPCL
Location : HPCL (VISAKH REFINARY), Malkapuram, Visakhapatnam
Duration : 2 Weeks
Description : This project covers study on all functional areas of a HPCL Visakh
Refinery, which includes the Generation of electrical power in Captive power plant and Distribution of power from generating station to various substations and from there to several loads.
Project Title : STUDY PROJECT ON 400KV SUBSTATION
Location : 400KV SUBSTATION, Kalapaka, Visakhapatnam
Duration : 2 Weeks
Description : This project covers study on Kalapaka 400KV Substation
Under Simhadri and Vizag Transmission System Project, This project includes the study on the power transmission from Simhadri to the various areas and the equipments used in the substation like protective devices relays, current transformers, potential transformers, lighting arresters etc…
Project Title : SUBSTATION MONITORING AND CONTROLING
Location : Raghu engineering College, Visakhapatnam
Duration : 1 Months
Description : This project is to protect the transformer and also to share the load with manual and automation system and to control the transformer from the overload condition and also indication to the local substation with electronic switch for the operator to switch the transformer.
STRENGTHS
- Understanding the priorities and needs and adapting to the changing requirements.
- Building trust and valuable working relationship with teams.
- Commitment and Dedication.
- Positive attitude helps in taking feedback – including constructive criticism – well.
DECLARATION
I hereby declare that details furnished above are true to best of my knowledge.
VISAKHAPATNAM KORLANA MOHAN RAJ
-
February 7th, 2012, 12:50 AM
Post Count Number #6
Resume
SATYA PRAKASH
E-MAIL : spmech10 AT ymail.com
sp.mech10 AT gmail.com
________________________________________
CARRIER OBJECTIVE :
Looking for a position in a resulted-oriented Organization where Acquired skills and education will be utilized towards continuous growth and advancement and also provide opportunity to learn new technologies.
WORK EXPERIENCE : 1 year & 5 months
Sep. 2010 to till date –As Engineer
Macawber Beekay Pvt. Ltd., Noida- a subsidiary of BSBK Engineers Pvt. Ltd., was established in 1984 as a joint venture in collaboration with M/s Clyde Bergman Material Handling Ltd. Of U.K. (FORMALY Simon-Macawber Ltd.) to bring to India the Technology of Dense Phase Pneumatic Conveying for Transfer of Bulk materials especially Dry Fly Ash. It has been Providing Dry Ash Handling System throughout Power industry for solid fuel-fired boilers of sized up to 800 MW. Combining the need of environmental pollution control with energy conservation, it’s unique conveying systems offer solution of bulk material handling problems of the core sectors of the industry- Power, Cement, Alumina, steel, Chemicals, Sugar, Paper, Foundry etc.
Project : Rayalaseema Thermal Power Project, APGENCO, Dist. - Kadapa, Andhra Pradesh.
A).Ash Handling System for Units # 5(210 MW)
Dry Fly Ash and Bottom & Coarse Ash Handling systems for Unit # 5(1x210 MW)
Complete Ash Handling Plant Including Long Distance Conveying of fly ash (2.0 km)
B).Pneumatic conveying Coal Mill Rejects System for Unit # 5(210 MW)Key Responsibilities :-Reading & Understanding Various contract Agreements, Collection of Important data from projects and sits
C).HCSD system for Unit #5(210 MW)
A High Concentrated Slurry Disposal System for unit # 5(210MW)
Disposal of Ash And Water Slurry(60 :40) By GEHO PUMP
Present Position : Erection/Piping/Site Execution Engineer
Activities Include :
- Responsible for execution of assigned projects
- Responsible for day to day supervision of work, planning, scheduling, monitoring of projects
- Ensures effective coordination of all project execution activities taken up by different functions Mechanical, Electrical and Instrumentation.
- Executed for mechanical part of the fabrication, Erection, Inspection and Commissioning of associated Equipments (Both Rotary and static).
- Assist Project Head in the preparation of project execution schedule and assigning and allocating resources for project to ensure successful completion of project meeting time, quality and cost parameters.
- Assists Site Head in mobilization of resources such as manpower, plant & machinery, funds, site facilities etc. for smooth execution of project.
- Co-ordination with the design department Modify & Development of drawings as per site condition.
FINAL YEAR PROJECT PROFILE :
Name of Project : SOLAR CHIMNEY POWER PLANT
Team Size : 6
Duration : Six months
Details :-The solar chimney is a natural draft device which uses solar radiation to provide upward momentum to the in-flowing air, thereby converting the thermal energy into kinetic energy. A study was undertaken to evaluate the performance characteristics of solar chimneys both theoretically and experimentally. A solar chimney is a combination of three established technologies, namely, the greenhouse, the chimney, and the wind turbine, chimneys both theoretically and experimentally.
EDUCATION :
- B.Tech in MECHANICAL ENGINEERING (2007-2010) from Dr. K.N. Modi Inst.Of Engg. & Technology (MODINAGAR) with 69.07% aggregate.
- DIPLOMA in MECHANICAL PRODUCTION (2004-2007) from Govt. Polytechnic Gorakhpur with 72.56% aggregate.
TRAINING Undertaken :
During 2009- Successfully completed Vocational Training in Turbine maintenance department at HINDALCO INDUSTRIES LTD. (Renusagar Power Division).
EXTRA CURRICULAR :
- Given a paper presentation on turbo jet engines.
- Participate in agriculture programmes at school time.
I hereby declare that the above information is correct up to my knowledge and I bear the responsibility for the correctness of the above- mentioned particulars.
(SATYA PRAKASH)
-
April 1st, 2013, 10:23 PM
Post Count Number #7
CURRICULUM VITAE
M.SAIKIRAN
Email : saikiran.02455 AT gmail.com
Hyderabad - 062.
Career Objective :
To work in a reputed company and become a part of its development and to strengthen my skills. To work in a challenging environment .
Educational Qualifications :
- Diploma in AutoMobile Engineering from Govt. Polytechnic College, Masabtank -( 06 -09) , with 61.1%
- SSC from Xavier Memorial High School -(06) , with 73.3%
Computer Skills :
- AUTO CAD.
Work Experience :
- Worked as a service advisor from ORANGE AUTO GM- CHEVROLET 1 Year.
- Pursuing as a J.D.P service advisor at “TVS SUNDARAM MOTORS” in HONDA still date.
Strengths :
- Hardworking.
- Smart working with dedication & involvement.
Personal Profile :
Name : M.SAIKIRAN
Father’s Name : M.ANANDAM
Date of birth : 05-01-1990.
Gender : Male
Marital status : Single
Religion : Hindu
Nationality : Indian
Languages known : English, Telugu & Hindi
Hobbies : Singing & Mimicry , Listening to Music
Declaration :
I hereby declare all the above furnished information is true according to the best of my knowledge & belief.
Thanking you
PLACE : Hyderabad
DATE : Your's faithfully
( M.SAIKIRAN)