www.tractebelindia.com Tractebel Engineers Constructors Pvt Ltd Bharuch, Bhuj, Baroda : Cathodic Protection, Design Specification

[mskavi]

Tractebel Engineers & Constructors Pvt Ltd. Bharuch, Bhavnagar, Bhuj, Ujjain, Vadodara/Baroda : Manager - Cathodic Protection !! Very Urgent !!
Website: http://www.tractebelindia.com
tractebelindia.com

Designation: Manager - Cathodic Protection !! Very Urgent !!
Experience: 10 - 15 Years
Location: Bharuch, Bhavnagar, Bhuj, Ujjain, Vadodara/Baroda

Job Description:
1. Installation / Site Supervision works of Cathodic Protection in Gas Pipe line projects.
2. Proficient in Design Specification.
3. Installation & integration of Electrical & Catodic protection system at site.
4. Knowledge of NACE Codes & Standards.
5. Good in Computer & MS Programme.

Desired Candidate Profile:

B:E /B.Tech (Electrical), having min 10+ yrs of experience in cathodic protection. Knowledge of Codes / standards for inspection of line materials for Gas pipeline projects.Candidates from Gas/Hydrocarbon industry (EPC/Consultancy) are prefered. Must have good communication & leadership qualities.

Company Profile:
Tractebel Engineering, a leading engineering group of Belgium is a global leader in energy and infrastructure business with market leadership in power, gas pipelines, City Gas/CNG/LNG terminals, LPG terminals and related areas. TECPL, India, a 100% subsidiary of Tractebel is working in the area of Gas pipelines, LNG terminals, power plants and simulators.

Address:
Tractebel Engineers & Constructors Pvt Ltd
10-A, Shivaji Marg,
New Delhi,Delhi,INDIA 110015

Email Address: tecplhrd@tractebelindia.com

Keywords: Site Supervision works of cathodic protection , Design Specification,Electrical site installation & integration, Co- ordination with the client.

[Guest-IJT]

Name : KAMALAKANNAN
Email : trkksms AT gmail.com
Designation / Skillset : Electrical Engineer/
From, 05.08.2011
R. Kamalakannan,
Respected Sir,
Sub : Application for the post of suitable one
I have enclosed my profile. Basically I am a Diploma Holder in Electrical and Electronics Engineering having Good experience of Nine years in Saudi Arabia & UAE .Now I am doing higher education of A.M.I.E.
I was working in Saudi Arabia as an electrical engineer in one of the electrical Panel board industry. Previously I have well experience in U.A.E also..
I am prepared myself to accomplish the task given by the management to attain the Organizational Goals if you provide an opportunity to serve in your esteemed Industry.
Thanking you.
Regards,
R. Kamalakannan.

Resume :
Client Handled
- Al Futtaim Engineering U.A.E.
- Al Basti Muktha Groups U.A.E
- ETA Groups U.A.E
- BK Gulf Engineering U.A.E
- Al Hathoor Engineering U.A.E
- Target Electricals U.A.E
- SABIC, ARAMCO K.S.A
- SABIC, ARAMCO, Royal commission standard projects clients K.S.A.


Responsibilities
- Co ordination with engineers
- Dealing & Co ordination with
Clients
- Drawings with complete details of Project
- Supervision of projects
- Visit of project sites
- Take responsibilities to complete hole projects
- Hard working, Involvement
and Commitment
Pass Port Details
No .E -9013091 Valid Up to 07.04.2014
Relax…
Reading Electrical Related Books, Magazines, Journals and News Papers.
Listening Music
Soft Skills
- Communication Skill
- Team work
- Motivational skills
Objective

To pursue a progressive career in Manufacturing Industry, Excelling in the knowledge and skills of leading technologies, simultaneously contributing sincerely to business goals of organization.
Qualification and Year of Passing
Diploma in Electrical and Electronics Engineering with 85% Score (DEEE)
Under Going on A.M.I.E (Electrical)
Additional qualification
- Diploma in Computer Applications
- Well Knowledge in AUTO CAD -2008
- SCADA Programming
- Interfacing System for PLC Ladder, BFD, HMI, SCADA
Employment History
- Worked as an Electrical Engineer for 3 Years in Electricals and Controls Corporation (“A” Grade Contractor) at Coimbatore In India.
(Jun’2002 to Jul’2005)
- Worked as an Electrical cum Designing Engineer in the field of LT Switch Gear and Control Gear Panel board Manufacturing Industry at SHARJAH, UAE (Jul’2005 to Nov’2009)
- Worked as an Electrical Engineer in the Leading Panel Board Industry at Jubail in SAUDI ARABIA (Jan’ 2010 to May’2011)
Area of Experience (Manufacturing, Operation & Maintenance)
- LV Panels, MDBs, Meter Cabinets, SMDBs, DBs, Capacitor Banks. Auto Change over Panels, Mimic Panels, Annunciator Panels, MCCs, All types of Control panels Manufacturing, Installation & Testing as per Regulation of DEWA, SEWA &FEWA.

- HT, LT, Cables laying termination, testing & commissioning of the cables (1.1kv /6.6kv/11kv/33kv)
- Electrical Lightings & Building Wiring System, BMS based control panels.
- Commissioning of all types of Switch Gear and Control Panels, PLC Based system.
- Designing & Preparing of Load Schedules and Drawings as per regulations of DEWA, SEWA & FEWA.
Motors
- LT Motors, Two Speed Motor, DOL & Star –Delta starter, AC- DC Drives, MCCs & Chiller controllers.
PLC, HMI & DCS
- PLC & HMI based switch gear control system
- Motor control system
- Hydraulic and Pneumatic control systems
- Lighting Control System
TROUBLE SHOOTING
- PLC Based Control circuits and Power circuits
- Digital and Analog Meter Wiring
- LT Switch Gear & Control Panels (LV Panel, A.T.S Panel)
- Indoor and Outdoor service of PLC based Hydraulic and Pneumatic machines
ERECTION
- Erection, Testing and Commissioning of Distribution transformers
- Erection, testing and commissioning of LV Panels, Generators, control panels & Capacitor banks
- Laying & End Termination of LT/HT Cabels
- Erection of Earth Electrodes
Focusing in Work Area

- Cost Control Activities in the Way of Less Labour Management system and Productivity Improvement Techniques
- Commitment and Target Oriented Work Culture
- In my Tenure in Sharjah & Saudi , I finished couple of projects few days before the commitment date with utilizing less man power targeted for that work
- Instructions to Sub ordinates regarding safety Management Practices

Declaration
I here by declare that the particulars furnished above are true to the best of my knowledge and belief.
Place : Pudukkottai

Date :- 05/08/2011 R.KAMALAKANNAN

-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4449260
Date & Time : 5th Aug 2011 2:29 PM (UTC)
IP Address : 118.95.103.52
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.7) Gecko/2009021910 Firefox/3.0.7
Predicted Country : India

[Guest]

PRAJAPATI BHARATKUMAR MOHANLAL
E.ID : - prajapati_bharat15 AT yahoo.com
JAN.2010 Onwards At present working In TATA PROJECTS LTD AS A SR. SURVER FOR FIELD QUALITY &THIRD PARTY INSPECTION
RESUME
Name : Prajapati Bharatkumar M.
Email : prajapati_bharat15 AT yahoo.com
Qualification : B.E. (Mech)
Qualification Board/Uni. Year of Passing Percentage
S.S.C GSEB 1994 68.86%
H.S.C GSEB 1996 68.88%
B.E. (Mech) Gujarat Uni 2001 63.41%
Other Qualification : ASNT Level II Certification (UT, RT, MPT, DPT)
Work Experience
AT PRESENT WORKING IN TATA PROJECTS.LTD. AS A SR. SURVEYOR FIELD QUALITY INSPECTION & THIRD PARTY INSPECTION
1). PRESENT WORKING IN TATA PROJECTS LTD.AT KORBA (C.G.) AS A SR. SURVEYOR FOR FIELD QUALITY INSPECTION FROM 11Th Jan. 2010 TO CNT.
- CLIENT : ACB (I) LTD. KORBA, CHHATTISHGARH.
- PROJECT : 2X 135 MW THERMALPOWER PROJECT.
Job Responsibility :
Inspection of following equipments /components for Power, Oil, Gas, Steel Hydrocarbon & Water Treatment equipment
- Boiler pressure Parts &HP Piping (IBR)
- Turbine, ESP &Balance of Plant
- Cooling water Piping, Fire Fightening
- Pipes (Welded and Seamless)
- Pipe Fittings, Plates&Castings
- Fabrication &Erection of Pipe spools
- Conveyors, Pumps &Fans
- Gate, Globe, Ball, Butterfly & Check Valves
- Safety Relief Valves
- Fabrication &Erection of Structures
Activities Include :
- Witnessing welding qualification tests
- Review of WPS&Welding Procedure qualification records
- Alignment & Dimensional Inspections of equipments &Pumps As per Spec.
- Review of Radiographs for Interpretation
- Line verification with P&ID, Isometrics before piping hydro testing.
- Verification of construction Punch list status before mechanical clearance certification
- Review of technical Queries and review for acceptance
- Monitoring & close out of all CARs / non conformities observed during various construction stages / at site work
- Witness of Destructive and Non-Destructive Tests
- Surface preparation & painting Inspection
- Spark/Holiday Testing, Pull-Off testing For Adhesion for Rubber Lining
- Witnessing pneumatic/hydrostatic test
- Review heat treatment records.
- Review of final documentation for Line History Sheet & Issue Of Release notes.
- Handover of Dossiers, Radiographs and all other documents to operation Documents Team.
Work Experience
2.) I JOINED in L & T (ECC Division) at Barmer. (Rajasthan)
Projects : - Rajasthan Northern Area Development Project .( OIL AND GAS PROCESSING
TERMINAL) AS A QA/QC ENGINEER. Since 27 July 2009 to 5TH DEC. 2009.
CLIENT : - CAIRN ENERGY INDIA PTY LTD.
Job Responsibility :
- Manage Site activities such as Holiday/Spark testing peel-Off testing, surface preparation & Painting
- I conduct welder qualification as per ASME sec-IX
- Welding consumables management & ensuring quality
- Creating Awareness regarding usage of low hydrogen electrodes
- Inspection of structural as per AWS D1.1 & Piping (AG/UG) as per ASME B 31.3
- Manage welding activities such as preheating, post weld heat treatment
- Conduct PMI , Hardness testing, &Pressure testing witness & Document Review
- Responsible for stage inspection of Piping &Structural Works like fit up, weld visual & NDT
- Monitor all the welding activities as per the WPS
1.) L & T (ECC Division) at Jamnagar Export Refinery Project (JERP), Reliance Petroleum Limited, Jamnagar since 15th Oct 2007 TO 15th JULY 2009 as an Inspection Eng.
Job Responsibility :
- Manage Site activities such as Holiday/Spark testing peel-Off testing, surface preparation & Painting
- I conduct welder qualification as per ASME sec-IX
- Welding consumables management & ensuring quality
- Creating awareness regarding usage of low hydrogen electrodes
- Inspection of structural as per AWS D1.1 & Piping(Ag/UG) as per ASME B 31.3
- Manage welding activities such as preheating, post weld heat treatment
- Conduct PMI , Hardness testing, &Pressure testing witness & Document Review
- Responsible for stage inspection Of Piping & Structural works like fit up, weld visual & NDT
- Monitor all the welding activities as per the WPS
I joined Shah Alloys Ltd since as an Eng. Since 25th Aug 2003 to 9th Oct 2007
Job Responsibility :
- As Engineer, I responsible for Quality related activity such as production of STAINLESS STEEL & CARBON STEEL Plates&Coils (H R, & HRAP) Inspection and also Third party inspection & Authorization for Quality of final product as per ASTM norms.
- To Conduct Mechanical Testing, Chemical Testing as per ASTM and Maintain Record it.
- To prepare test Certificate Grade wise.
I joined JSL industries Ltd as Apprentice Engineer (QAQC) Since 18th Nov 2001 to 17th Nov 2002 Moger Anand Gujarat. In Coming Material Inspection(Checks/Tests, Document Review) As per QAP
Field for interest :
- Knowing and solving of industry Related Engineering problems.
- Willingness to know the industry.
- How to get more from man and machine
Computer Literacy : Working knowledge of EXCEL & Word
Code familiarity[]: AWS D 1.1, ASME B 31.3, B31.4, B31.1&31.8 Sec IX

[Guest]

Prajakta Yogesh Nandgaonkar
sheetal_sawant AT rediffmail.com

AREA OF SPECIALISATION :
Co-ordination, Relationship and Customer Service

EXPERIENCE :
Indusind Bank (Asst Manager) – From July 2011 Till date
Job Responsibilites :
Currently working as Teller – Handling of cash, RTGS, NEFT, PO/DD,
Downloading reports, ATM balancing as well as cash loading of ATM, stock verifying,
Inward/outward remittance, tatkal kits, account opening.
HDFC Bank Ltd (Asst. Manager) – From July 2008 To June 2011
Job Responsibilities :
Worked as an SRO(Service Relationship Officer) – Handling RM’s
Worked as a Teller – Handling DD/MCK counter, RTGS,NEFT, Transfers, Salaries of the corporates, Checking BJR, Downloading reports, Stock verifying, Inward/Outward Remmittances.
Working as Personal Banker – Handling day-to-day routine work of the branch, customer queries, walk-in customers, account opening and closure of accounts, follow up with legal dept for deceased case of the customer, cheque books of the customers(i.e delivering the same to the customers within TAT).Sending forms to back office and get the same processed asap. Also check forms which comes on hold and revert to them within TAT.
- HDFC Bank Ltd (Contract Basis ) From April’06 To June 2008
- HBL Global Pvt.Ltd. ( Sister concern of HDFC Bank )
Corporate Executive, November 2001 to March’06
Job Responsibilities :
- Since Nov-2001- Corporate Executive reporting to Corporate Relationship
Manager.
- Manage Retail asset and liability Relationship of the Top 40 Corporate client of
HDFC Bank who transact business worth Rs.200 Crores.
- Market customized personal finance product to all of them via corporate sales
Manager, Branch Banking & sales channel
- Oversee all documentation of account opening & Salary upload
- Explain process in detail for a/c opening
- Attend induction held on top corporate for a/c opening
- Prepare daily MIS and Reporting
- Liaise with all Senior Managers & above for their individual as well as their corporate Salary uploads during month end.
- Get the salary done on time & keep the customers happy & result oriented.
- Following up for the corporate deal.
- Solving the individual queries.
- Working closely with the product team to understand corporate needs to develop and launch new enhanced product offerings.
- Improve customer query resolution TAT from 72-24 hrs.
- Scheduling Meeting & Conferences – Internal as well as Corporate wise.
- Coordination for Travel arrangements.
- WIPRO LTD.
HR- Co-Ordinator, April 2000 - Aug 2001
Job Responsibilities :
- HR coordinator- Reporting to HR manager
- Preparing salary details for entire department
- Helping in making appointment letters, joining formalities etc
- Making payment to customers
- Preparing daily MIS
- Attending seminars
- Helping in attending to training programs
ATCOM TECHNOLOGIES LIMITED
Accounts / Sales Executive, Jan 98 - Feb 2000
Reporting to Account Manager
- Preparing cash book & handling of cash
- Preparing vouchers & making payments
- Managers Sales MIS, analyze customer feedback and suggest measures to improve performance
- Collection of payment from different customers
- Customer relationship

EDUCATIONAL QUALIFICATION :
- Diploma in. Business Management .Wellingkar Institute .
- Diploma in Computer Science.
- Graduation in Commerce from Mumbai University.

TECHNICAL KNOWLEDGE :
- Operating Environment – DOS, WINDOWS, MS-OFFICE.
- English typing speed 30 w.p.m.

STRENGTHS :
- Result Oriented Approach.
- People Management Skills.
- Negotiation Skills.
- Time Management

KNOWLEDGE DOMAINS :
- Process control & manager
- Quality manager
- Sales market and strategy
- Risk assessment