S.I Precision Mould Pvt Ltd Delhi : Maintenance, Injection Moulding Engineer

[mskavi]

S.I Precision Mould Pvt. Ltd. Delhi/NCR : Sr. Engineer Maintenance

Keywords: Mould Maintenance, Injection Moulding

Designation: Sr. Engineer Matenance
Experience: 4 - 6 Years
Location: Delhi/NCR
Compensation:
Rupees 1,50,000 - 2,50,000
Education:
UG - Diploma - Electrical, Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Chemicals/ PetroChemical/Plastic/Rubber
Functional Area: Production, Maintenance, Quality
Posted Date: 08 Jun 2009

Job Description:
Experience should be in Injection Moulding, Experience Should be in Mould Maintenance ,Qualification- electrical or Machnical.Experience- 4 to 6 yrs

Desired Candidate Profile:
Experience should be in Injection Moulding, Experience Should be in Mould Mainteence ,Qualification- electrical or Mechanical.Experience- 4 to 6 yrs

Company Profile:
It is Korean (MNC) Company, Having three branches in India two in Noida and one is in Chennai. It is ISO 9001, 14001 certified companies working with Samsung India Pvt.Ltd.It is manufacturing of Plastic Moulding Parts.

Executive Name: Namrata Singh

Address:
Not Mentioned

Email Address: si_precision@yahoo.com

Telephone: Not Mentioned

Keywords: Mould Maentence, Injection Moulding

[niranjan669]

CURRICULUM VITAE


NIRANJAN MAHARI
Mob: 09920077584,
Email- niranjan669 AT gmail.com

PERSONAL DETAILS
Father Name Mr. RAMESH CH. MAHARI
Date of Birth 20th July 1988
Permanent Address
At-Bilabarapada, Post-Narua
via- GOP, Dist- Puri
Orissa, Pin-752110,
Gender:-Male
Nationality Indian

OBJECTIVE
- To accept the challenging assignments with full responsibilities, guaranteed by proportionate authorities, where I can apply my Knowledge & Willing to work as a key player in challenging & creative environment. And looking myself as an Operation People in Industry. To get involved with the work related to Product Design, Mould/Tool Design & Mould making to apply my past individual skills to meet the present challenge of the Industry

TECHNICAL EDUCATION:-
- Diploma In Tool & Die Making– Central Tool Room & Training Centre (CTTC) Bhubaneswar, Orissa.
AS 9100B, ISO 9001:2000, 14001:2004 & OHSAS 18001:2007 Certified
Duration: Three years Diploma with one year industrial training program
JOB PROFILE:
Willing to work as in the environment which can enhance my skills in Plastics Field TOOL ROOM, TOOL DEVELOPMENT& TOOL DESIGN, R&D And also in the field of CAD/CAM.

TRAINING EXPERIENCE:
WORKING IN ABHIJEET PLASTICS (INDIA)PVT. LTD
JOB RESPONSIBILITY: TOOL ROOM
TOOL DEVELOPMENT
MOULD ASSEMBLY
MOULD PARTS DESIGN
PREVENTIVE PLAN FOR DIFFERENT MOULD


ACHIEVEMENT IN ABHIJEET PLASTICS (INDIA) PVT. LTD
Plan layout in Tool room for mould & machine
Made many mold Flash free.
Co-ordinate of Mould Maintenance plan.
DURATION: 15th MAY 2009 TO TILL DATE

AREA OF INTREST:-
Tool room & Moulding section
Tool & vendor development.
Plastics Mould Design.

ACADEMIC EDUCATION:-
Ø Metric from BSE Orissa with70% marks.


SUBJECT DETAILS: -
Ø Engineering Drawing & Drafting.
Ø Injection Moulds, Blow Mould, Transfer Mould. Etc.theory & design.
Ø Design & Development.( Mould & Tool )
Ø Exposure on Jigs, Fixture & Gauges.
Ø Metrology & Quality Control.
Ø Production Processes.
Ø Knowledge about Plastic Material Science, It’s processing & testing.
Ø Workshop Technology & Calculation.
Ø Workshop Practice.

OTHER SKILLS:-
Ø Estimation, costing & planning of Press tools, Moulds, Jigs& Fixtures.
Ø Having 6000 hours of practical hand on all type of conventional machinery in Tool Room.
Ø 400 hrs. Practical exposure to latest CAD/CAM development in Tool & Mould manufacturing.

DESIGNING SOFTWARE SKILLS
- AutoCAD 2004-09
(2-D, Drafting, Solid Modeling etc)
- PRO-E WILD FAIR 4.0, UG -NX4

(Solid & Surface modeling, product design, mould designin, mould making mould maintaince, Assembling, Detail Drafting, Core Cavity Extraction)

PROJECTS HANDLED
1.During DTDM (6th sem): I have made of a Portable Vice in 1st sem, Hand Injection mould of a Spoon in 2nd sem , Press Tool of a Clip in 3rd sem, Hand Injection mould of a Cable Clamp in 4th sem, Injection mould of a Soap Case in 5th & 6th sem .

PERSONAL ATTRIBUTES:
- Initiator & wish to make things happens.
- Innovative & fast learner.
- Hardworking & Dedicated to my profession.
- Believe in team work environment.

STRENGHTS: -
- Self-Motivated & Confident
- Initiative & Optimistic
- Good team dynamics
- Ability to perform best under pressure


I hereby declare that all the details furnished above are correct to the best of my knowledge.

[Guest]

RESUME
Saurabh Sharma

Mail ID : saurabhsharma792 AT gmail.com
CAREER OBJECTIVE
To involve myself in the field of plastics by enlarge testing and manufacturing in particular in much dedicated way.
PERSONAL SKILLS
Comprehensive problem solving abilities, ability to work with team members, willingness to learn and urge to lead as per assignment with punctuality.
QUALIFICATIONS
ACADEMIC : 10th passed in the year 2002 from Haryana Board .
: 12th passed in the year 2008 from Haryana Open Board .
TECHNICAL : Three years Diploma in plastic Technology from Chhottu Ram Polytechnic Rohtak From 2002 to 2005 .
EXPERIENCE
1. Company : M/s KISAN MOULDINGS LTD.
Company Profile : Manufacturer of all SWR pipes & fittings, ASTM pipe & fittings, Injection Moulding Fittings, Composite pipes & fittings, Rubber ring, solvent cement.
Position : Production Executive
Period : Oct 2010 to till date.

Responsibilities : 1. Looking after all production activities.
2. Conducting inspection and testing for products manufactured in house
And submitting report.
3. Maintenance of company standard and completing formalities.
4. Installation of production machineries, setting process and continuing production
5. Selecting appropriate manpower and train them for different operations in plant
6. Responsible for overall production and setting process control points.
7. Identifying corrective and preventive measures and effecting continuous
Improvement.
8. Complete document of production of ISO
2. Company : M/s RIKKI PLASTIC PVT. LTD.
Company Profile : Manufacturer of all Automobile parts for JCB CRANES, HERO HONDA motor cycles, YAMAHA motor cycles.
Position : Production Engineer.
Period :JUNE 2005 toAPR 2007

Responsibilities : 1. Looking after all production activities in shift.

2. Conducting inspection and testing for products manufactured in house
And submitting report.
3. Maintenance of company standard and completing formalities.
4. Complite document of production of ISO TS .
3. Company : M/s AJAY INDUSTRIAL CORPORATION. , Dehradun.
Company Profile : A Group of companies engaged in various plastics and other manufacturing process.
Its one Division started at Dehradun manufacturing CPVC Pipes and Fittings
for hot and cold water system as per American Standards. This Process is having
Technical collaboration with one of the overseas expert in this field i.e
NOVEON(Belgium). Also
Manufacturing CPVC and PVC Pipes and fittings for Industrial piping system.

Position : Production Engineer.
Period : MAY 2007 to MAY 2009 .
Responsibilities : 1. Overall responsibility of production.
2. Installation of production machineries, setting process and continuing production..
3. Selecting appropriate manpower and train them for different operations in plant
5. Responsible for overall production and setting process control points.
6. Identifying corrective and preventive measures and effecting continuous
Improvement.

4. Company : M/s .TIME TECHNOPLAST LTD SILVASA.(AN ISO9001:2000)
Company Profile : A Group of companies engaged in various plastics and other manufacturing process.
Its one Division started at SILVASA manufacturing Furniture , jars and lid.
Its also making HDPE pipes,GRPpipes and PVC PROFILE.
Position : Production Sr . Engineer.
Period : JUNE 09 to OCT2010
Responsibilities : 1. Overall responsibility of production in a shift.
2. Installation of production machineries, setting process and continue
production..
3. Selecting appropriate manpower and train them for different operations in plant
4. Responsible for overall production and setting process control points.
5. Identifying corrective and preventive measures and effecting continuous
Improvement.
CAPABILITIES
1. Clear theoretical & Practical idea about properties & Characteristics of raw material to its product.
2. Practically strong in Trouble shooting.
3. Ability to Handle the material like HDPE,LDPE, NYLON, PP, TPE, PVC, CPVC,PBT, PU,EVA,PPHP, FPP ,DERLIN.
DECLARATION
I hereby solemnly declare that all the statements made in the above application are true and correct to the best of my knowledge and belief.
TOTAL EXPERIENCE –6 Years

[amit9811969766]

CURRICULUM VITAE

AMIT KUMAR SINGH
E-MAIL ID — amit.singh362 AT gmail.com
CAREER OBJECTIVE :-
To utilize my creative knowledge, technical skill and analytical mindset towards realization of both organizational and personal goal with deep experience of building teams and executing good plans.
EXPERIENCE :-
COMPANY :- PRECISION MOULD & DIE PVT. LTD
COMPANY PROFILE :- We are ISO 9001:2000 certified for design and manufacture of moulds and plastic products with 3 manufacturing locations and with an employee strength of about 500. For over 35 years we at Precision Moulds and Dies (PMD) have been manufacturing high end fully hardened injection molding moulds and plastic products for all types of industries . Plastic products includes packaging products, industrial products, premium household products, personal care products etc which are supplied to all leading brands in India, UK and USA.
DEPARTMENT : – PRODUCTION (INJECTION MOLDING)
DESIGNATION : – ASST. MOLDING ENGINEER
JOB PROFILE :-
- Handle 250T L&T, 180 T Haitian, 150T Allplas, 150T L&T, 100T L&T, 100T Allplas 90T Haitian, 80T Allplas, 80T Haitian, 50T Allplas INJECTION MOLDING MACHINE.
- Training to the operators regarding process & quality consciousness.
- Looking after total manpower & material utilization for the shift.
- Maintain all process parameters to achieve the standard quality & target production.
- Maintaining 5’S on the line
- Keeping eyes on good house keeping & discipline in respective shop floor area
COMPANY : - MOTHERSON SUMI SYSTEMS LIMITED
A Division of Motherson Automotive Technologies and Engineering (MATE)
COMPANY PROFILE :- MATE offers injection molding & blow molding solutions for automotive as well as non automotive sector world wide for MSIL, HONDA, HYUNDAI, GMI, TML, PRICOL, NISSAN, CONTINENTAL, CALSONIKKANSEI, and WHIRLPOOL.
DEPARTMENT :- Production (INJECTION MOLDING)
DESIGNATION :- DET
JOB PROFILE :-
- Operating 1300 T- Mitsubishi, 850T- JSW, 660T-Nissei injection Molding Machine for with process and Robot setting process and machine troubleshooting.
- Manpower & Resource Management and Continual Improvement.
- Trouble shooting of Injection molding defects.
- Looking after total manpower & material utilization for the shift.
- Responsible for meeting target production.
- Ensure quality in production initiate corrective actions to solve quality problems in production..
- Minimizing the possibility of machine break down by timely intimating maintenance department.
- Keeping eyes on good house keeping & discipline in respective shop floor area.
- Have adequate knowledge of 5S & KAIZEN & Its application in industries
ACADEMIC CREDENTIALS :-
- SECONDARY PASSED FROM C.B.S.E IN 2004
- 10+2 PASSED FROM C.B.S.E IN 2006
TECHANICAL QUALIFICATION :-
DIPLOMA IN PLASTIC TECHNOLOGY FROM CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY (CIPET) PANIPAT CENTER WITH AN AGGREGATE OF 72% APPROXIMATELY IN 2010.
TECHNICAL FORTE :-
- OPERATING SYSTEM – WINDOW 9X/2000/XP, DOS.
- MS OFFICE
- INTERNET
SOFTWARE KNOWN :-
- CAD using AUTO CAD