Multi Mantech International Pvt Ltd Baroda : civil Site Engineer

[mskavi]

Multi Mantech International Pvt. Ltd Vadodara/Baroda : Site Engineer - Baroda
Website: http://www.mmipl.in

Keywords: Diploma civil engineer, civil engineer, fresh engineer

Designation: Site Engineer - Baroda
Experience: 0 - 2 Years
Location: Vadodara/Baroda
Education:
UG - Diploma - Civil
PG - Post Graduation Not Required
Industry Type: Construction/ Engineering/Cement/Metals
Functional Area: Site Engg., Project Management
Posted Date: 05 Jun 2009

Job Description:
* Quality and Quantity check on Site.
* Maintaine Site Register.
* Provide engineering support to the contractor.
* Report to Sr. Site Engineer.

Desired Candidate Profile:
* Must be atleast diploma civil engineer.
* fresh engineers interested to work for consultant company can also apply.
* Fresh / Experience graduate and under graduate engineers under Distance learning mode can also apply.
* CANDIDATE MUST FROM BARODA

Company Profile:
MMIPL is an ISO 9001:2000 certified Infrastructure management and Consulting Engineering company supported by its wide network of offices. MMIPL is a Multi Disciplinary company providng wide area for its engineers to explore out.

Executive Name: Mrs N H Patel

Address:
Multi Mantech International Pvt Ltd
M-Square
Millenium Plaza,Opp Swaminarayan Temple
Judges Bungalow Road, Vastrapur
Ahmedabad,Gujarat,INDIA 380015

Email Address: mss@mmipl.in, nhp@mmipl.in

Telephone: 91-79-26750515

Reference ID:
SITE ENG-BRD

Keywords: Diploma civil engineer, civil engineer, fresh engineer

[Guest-IJT]

CURRICULAM VITE

JOB TITLE : PIPE WELDER


GNANA SEKARAN. M

E-mail : gnanasekaran.mani AT gmail.com gnanasekaran.mani AT rediffmail.com

20+ Years Experience in Welding (SMAW, GMAW, FCAW, GTAW), Inspection of Welding, Fabrication & Erection AND 4 and Half YEAR OF EXPERIENCE IN NTTF as an Assistant Training Officer. At present working in TUV Rheinland (India) Pvt.Ltd. as a Welding Instructor.


Academic Profile :
- WELDING AND INSPECTION-AWS CERTIFIED WELDING INSPECTOR’S Seminar and examination was conducted by INDUSTRIAL QUALITY CONCEPTS (IQC), CHENNAI. INDIA-May 2008.
- NAC-NATIONAL APPERNTICESHIPCERTIFICATE- (June 1984 – June 85)
in I.A.E.C.BOILERS INDIA PVT.LTD, Ranipet.
- NCVT – WELDER TRADE-(August 1982–July 83) with 75%
INDUSTRIAL TRAINING INSTITUTE – VELLORE.
- HIGHER SECONDARY- 1981-84 With 50%.
GOVT.Hr.Sec.School. Puttuthakku.
- MATRICULATION- 1980-81 With 60%
GOVT.Hr.Sec.School. Puttuthakku.

Technical Qualification
1. ASNT Level – II Multi skill.
ASNT Level – II Ultrasonic Testing (UT),
ASNT Level – II Radiography Testing (RT),
ASNT Level – II Penetrant Testing (PT),
ASNT Level – II Magnetic Particle Testing (MT)
Total experience : 24 Years.
21 Years in India
3 Years in abroad

Experience in all kinds of welding like SMAW, GMAW, FCAW, GTAW and Gas Cutting, Gas welding.

COMPANY : TUV Rheinland (India) Pvt. Ltd,
Welding Technology centre,
B-111, Devasandra Industrial Area,
Mahadevapura,
Bengaluru – 560048
Position Held : Welding Instructor
Duration : January 2011 – Till date

COMPANY : EDUTECH NTTF INDIA PVT.LTD.
(Formally known as NTTF-Nettur Technical Training Foundation)
Web : www.nttftrg.org Pune – Bengaluru Road, Dharwad – 580001. Karnataka.
Position Held : Asst.Training Officer / Section In charge.
Project : 1. Welding Training for Rehabilitation (Tribal) People in Tata steel “Kalinganagar” in Orissa.(tie-up with Tata steel)
2. Pipe line welding training (SMAW, FCAW) for ‘Punjlloyds’ east- west gas pipe line project in Belgaum Training Centre.
3. Welding Training for Mechanical Maintance Students in Bellary Training centre (Toranagallu) tie-up with JSW.
4. Savanur
5. ITC chirala

Duration : July 2006 – Dec 2010

DUTIES AND RESPONSIBILITIES :

- Taking the whole in charge of the training centre
- Providing training in SMAW, GMAW, FCAW and GTAW
- Handling theory classes in various welding and cutting subjects through power point presentation
- Ensuring the accurate calibration records are maintained for all welding machines.
- Monitor the weekly overall performance of the welder trainees.
- Preparing the weekly and monthly report of training
- Periodically conducting monthly theory and practical test
- Maintaining the welder trainees exercise evaluation records
- Passed the Radiography test (Pipe welding) conducted by Punjlloyd Ltd.
- Often visit the project site and observing the welding procedures like API 1104 to improve the welding training, quality and inspection methods.
- Managing trainee’s hostel and their complaints.

COMPANY : R.A.K. CERAMICS, Post Box no: 4714, Ras Al Khaimah, U. A. E.
Position Held : WELDER / FABRICATION AND ERECTION DEPARTMENT
Project : New plant construction and erection works. SUDAN (African country) Project also.
Duration : December 2004 – March 06.

DUTIES AND RESPONSIBILITIES :
- Fabrication and erection work of the platform, column and all type of structural works.

COMPANY : AL-AMEED WELDING WORKS, 33. House no 1219, Road 3928, Area 939, East Riffa, BAHRAIN. (ARABIAN GULF)
Position Held : WELDER / WORKSHOP INCHARGE
Project : Repairing and making new Hydraulic cylinders and piston rods, mainly AFI company jobs.
Duration : June 2002 – April 04

DUTIES AND RESPONSIBILITIES :

- Involve the Inspection of all welding activities.
- Responsibility for Measuring and cutting of the cylinders and piston rods
- Workshop maintenance and supervision


COMPANY : BRIJ & ASSOCIATES, 33. Medavakkam main road, Keelakattalai, CHENNAI – 600117
Position Held : SUB CONTRACTOR / FABRICATOR
Project : Bus body building (Asok-leyland’s Dubai order), Heavy vehicle (Defense) bodybuilding and Tanker works.
Duration : July 2001- June 02

COMPANY : BALMER LAWRIE FREIGHT CONTAINERS LTD., Madras Export Processing Zone, Tambaram west, CHENNAI – 600045
Position Held : QC WELDING INSPECTOR
Project : Manufacturing of Freight Containers and Car Containers.
Duration : April 1995 – June 2001

DUTIES AND RESPONSIBILITIES :
- Daily check in consumable storage
- Carry out fit-up and welding inspection on daily basis.
- Periodically check the gas flow rate, voltage and current settings.
- Inspect overall welding process before, during and after
- Monitor weekly welder performance and overall rejections
- Monitor line vice weld summery
- Carry out line check inspection, issue punch list to production crew.
- Maintaining QA/QC documentation activities to comply with company system

COMPANY : MANJU WELDING WORKS, Rangapuram, Vellore – 632009.
Position Held : PROPRITOR / FABRICATOR
Project : Fabricating grill, windows, shutters and all type of engineering woks.
Duration : March 1989 – January 1995

COMPANY : WIPRO LTD., (Fluid Power Division), Peenya Industrial Area, BANGALORE – 560058
Position Held : WELDER
Project : Manufacturing of Hydraulic cylinders and Piston rods.
Duration : August 1988 – December 1988

COMPANY : FOURESS ENG. (India) PVT. LTD. Peenya Industrial Area, BANGALORE – 560057.
Position Held : WELDER
Project : Manufacturing various types of Valves and Isolators.
Duration : October 1986 – April 1988

TRAINING AND SEMINAR

- PEDAGOGY (TRAINER’S TRAINING) PROGRAMME – Conducted by Mr.BHAT. EDUTECH NTTF Corporate office, BANGALORE, INDIA.

- WELDING AND INSPECTION – Seminar and AWS-CWI examination was conducted by INDUSTRIAL QUALITY CONCEPTS (IQC), CHENNAI. INDIA-May 2008.

- ASNT Level – II Multi skill - Seminar and examination was conducted by BIT Inspection Technology, CHENNAI. INDIA. August 2008.

- ADOR FONTECH’S Repair & Maintenance of Welding.
ACHIVEMENTS

- Planning and chalking out for the new NTTF Vocational Training (Welding) center, tie-up with Punj Lloyd – Belgaum center, Karnataka

- Recruiting the trainees and Co-coordinating the training programme.

- Conducting Interview and recruiting employees (welders) for TATA Motors (Telco, Tata margobolo) Dharwad.

- II Prize Winner of CII’s (Confederation of Indian Industry) Regional Work skill Competitions at Bengaluru. (Dec-2009)

MY STRENGTH
1. Ability to learn and adapt with the new environment.
2. Innovative & problem solving abilities
3. Relationship building and Good People management Skill.
4. Keen to take challenging tasks and understands the importance of knowledge sharing and teamwork.
5. Sincere and hard working.
6. Have the ability to work to the satisfaction of the Management under any circumstances.
7. Ability to learn new languages and can easily accommodate to new surroundings and new workplace.

If given an opportunity to serve in your organization, I assure my full involvement in discharging of duties with total dedication and commitment to the organization. Anticipating a favorable reply from you sir,

DECLARATION

I here by declare that the details furnished above are true to the best of my knowledge and belief.
Date : 19/02/2011
Place : CHENNAI.


M. GNANASEKARAN.

[Guest]

RESUME-
NAME : SHIVANG PRAVINCHANDRA TRIVEDI
EMAIL : shivang_triv_1985 AT yahoo.co.in
HOBBIES : music, Compiling, Reading.-
DISCIPLINE : DIPLOMA CIVIL, Passed In 2006 (M.S.U OF BARODA)- B.E CIVIL (STRUCTURE) Passed in 2009 (M.S.U OF BARODA) - (got admission in 2nd year B.E civil through open test, 2ND RANK)
CAREER OBJECTIVES :- Put all my creativity and innovative skills with team work at workplace for development of organization, to achieve organizational goal for personal and professional growth in my career.-
EXPERIENCE :- After completing diploma civil and during my graduation period I have got following experience.
RESIDENCIAL AND COMMERCIAL BUILDING SUPERVISION FOR OM CONSTRUCTION AS A SITE INCHARGE (for whole project of residential bunglow from dec 2006 to mar 2009)
EXPERIENCE OF BILLING WORK, ESTIMATION AND COSTING FOR OM CONSTRUCTION CO. (part time and contract base job as project completes)Bill for labor contractor for residential, bunglows, estimation for new residential bunglows projects.
QUALITY QUANTITY CHECK FOR OM CONSTRUCTION FOR RESIDENTIAL AND COMERCIAL BUILDING.
EXPERIENCE ON STRUCTURE DESIGN OF SLAB AND BEAM OF BUNGLOWS AND FLAT IN RUMADRI ASSOCIATES WITH CERTIFICATE IN SUMMER TRAINING FROM TECHNOLOGY FACULTY M.S UNIVERSITY OF BARODA IN MAY 2008
AUTOCAD 2009(WITH AUTODESK INTERNATIONAL CERTIFICATE) WORKING IN STRUCTURE DESIGNERS OFFICE FOR DESIGN AND DRAWING FOR RESIDENCIAL FLATS, AND BUNGLOWS.(may-june 2008 and 2009)
Previous Job : Pratham Developers.(Baroda)
Working time : 2 years.(july 2009 to may 2011)
Job Profile : Jr. Engg. Execution
CURRENT JOB : L&T Limited.(Godrej Garden city, Ahmedabad) From May 2011.
JOB PROFILE : Site Incharge, Execution and Planning.-
Total Experience : 5 years
After Degree : 2 years.
Salary Drawn : 30000/- Per month on hand