NAVA NIRMAN ENGINEERING PVT LTD Kolkata : Heavy Machinery,sheet metal, structural fabrication Mechanical Engineer

[mskavi]

NAVA NIRMAN ENGINEERING PVT. LTD. (PROPOSED) Kolkata, : Mechanical Engineers- Degree/ Diploma/ ITI

Designation: Mechanical Engineers- Degree/ Diploma/ ITI
Experience: 2 - 6 Years
Location: Kolkata,

Job Description:
Heavy sheet metal and structural fabrication works.
Experience in sheet metal and heavy fabrication works- 2 to 6 years.

Desired Candidate Profile:
Experience: 2 - 6 Years
Location: Kolkata and suburbs.
Education: UG – Degree/ Diploma/ ITI- Mechanical Engg/ Production Engg.
PG - Post Graduation Not Required

Company Profile:
A Fast growing ISO 9001:2000 certified company operating extra large body fabrication for Indian Railways. Also plan to supply defense, shipping and Telecom sector large haevy fabrications.
Our turnover is around 25 Cr. per annum.

Our head office is located at shyambazar and site office at Dankuni, nearby Dankuni Bus Terminal Housing Complex. Our factories are located at Dankuni, Dhulagarh, Chakundi and Bhadua.

Address:
Nava Nirman
Highway Super Market (Latia Building)
T N Mukherjee Road
Dankuni
Kolkata,West Bengal,INDIA 700210

Email Address: e6world@yahoo.com, navanirmanengineers@rediffmail.com

Keywords: nava nirman, operations, Degree, Diploma, ITI- Mechanical Engg, Production Engg, Design, Drg., Purchase, QC, Production, Maintenance, Industrial Products, Heavy Machinery, Heavy sheet metal, structural fabrication

[Guest]

Curriculum Vitae
DIBAKAR BERA
Email : diwakarberadiatm AT gmail.com
OBJECTIVE
To secure a challenging position in private/public sector, where I can effectively contribute my skills as Technical Professional, which offers professional growth while being resourceful, innovative, and flexible.
BRANCH
ELECTRICAL ENGINEERING
Languages known : English, Hindi and Bengali.
EDUCATIONAL QUALIFICATION
PROFESSIONAL :
COURSE : B.TECH
COLLEGE : DURGAPUR INSTITUTE OF ADVANCED TECHNOLOGY & MANAGEMENT
UNIVERSITY : WEST BENGAL UNIVERSITY OF TECHNOLOGY (W.B.U.T)
STREAM : ELECTRICAL ENGINEERING
SEMESTER 1st 2nd 3rd 4th 5th 6th 7th 8th
Marks Obtained 7.47 7.23 6.80 7.25 7.08 7.53 7.96 7.96
ACADEMIC :
EXAMINATION YEAR OF PASSING BOARD INSTITUTION PERCENTAGE OF MARKS
HIGHER SECONDARY EXAMINATION 2006 WEST BENGAL COUNCIL OF HIGHER SECONDARY EDUCATION(W.B.C.H.S.E) CONTAI MODEL INSTITUTION 71.2
SECONDARY EXAMINATION 2004 WEST BENGAL BOARD OF SECONDARY EDUCATION(W.B.S.E) FULESWAR DURMUTH HIGH SCHOOL 75.5
SKILL PROFILE
SUBJECT OF INTEREST : ELECTRICAL MACHINE, POWER SYSTEM,POWER ELECTRONICS.
HOBBIES
Playing Cricket, Listening Song specially Hindi.
VOCATIONAL TRAINING
VOCATIONAL TRAINING FROM “THE DURGAPUR PROJECT LIMITED”, DURGAPUR.
PROJECT UNDERGONE
TITLE :A DETAILED PROJEC REPORT ON THERMAL POWER PLANT
DURATION :6 MONTHS
UNDERGUIDENCE :PROF. BHASKAR SENGUPTA
STRENGTHS
Eagerness to Work Hard, Patience, Self Confidence, Positive Attitude.

[Guest]

RESUME
L.KESAVAN
Email id : kesavangrt AT yahoo.co.in
CAREER OBJECTIVE :
A challenging position sought with a progressive company that believes in its people where professional experience and expert knowledge can be exploited to the full.
High level of commitment and professionalism offered in return for challenge.
ACADEMIC QUALIFICATION :
April - 2008 : B.E in Mechanical Engineering with First class,
Thanthai Periyar Government Institute of Technology,
Vellore, Anna University, TN.
April - 2000 : Diploma in Mechanical Engineering, First class with
Honours, Tirupattur Polytechnic, Tirupattur, Tamil Nadu
ADDITIONAL QUALIFICATION :
- AutoCAD
- PRO/E
- MS Office, Microsoft Excel
PRESENT WORK EXPERIENCE :
Name of the Organization : M/s. VERGA Attachments Pvt. Ltd.,
Position Held : SENIOR EXECUTIVE - QUALITY
Duration : 25th August 2008 to Till Date.
WORK RESPONSIBILITY :
- Review of material test certificates, Identification and correction of materials as per material specification
- Inspection Carried out for Incoming Materials as per the Standards/Drawings and requirements, Raw Materials, Job Work Materials and Bought out items
- Inspection of New Development Jobs and finished products as per the Drawings
- Dimensional and Visual inspection of Earth-Moving Equipments (JCB Buckets, Couplers and Frames ).
- Preparation of inspection requirements for design specifications
- Inspection of material and welding related activities during the fabrication
- Coordinating with client and third party agencies for final clearance.
- Handling of mentioned instruments like Vernier, Micrometer, Height Gauge, Dial Bore Gauge, Bevel Protractor and other Gauges.
- Maintaining of Japanese 5’s house keeping principles and KAIZEN continuous improvement process
- Preparing of all quality control documents like SOP, WPS, 7QC Tools, PPAP, PDCA
- Conducting of NC meeting and preparing & monitoring of NC records
- Preparation of Inspection reports like Incoming, In-process and Final Inspection
- Preparing welder performance record
- Handling and solving customer complaints.
- Witnessing and interpreting dye penetrant testing of Earth-Moving Equipments (JCB Buckets and Couplers).
- Finding the root cause of In-house and customer end rejections.
PREVIOUS EXPERIENCE DETAILS :
1. Name of the Organization : M/s. Sree Srinivasa Structurals
Ranipet, Tamil Nadu.
( BHEL/BAP Ancillary Division )
Manufacturing of Air Preheater, Electrostatic Precipitator and Fans Sub Components through Fabrication of Sheet Metal Process.
Designation : Production Engineer
Experience : 08th March 2004 to 10th June 2008.
2. Name of the Organization : BHEL/BAP, Ranipet, Tamil Nadu
Manufacturing of Air Preheater, Electrostatic Precipitator and Fans Sub Components through Fabrication of Sheet Metal Process.
Designation : Technician Apprenticeship Training
Experience : 01st Mar 2003 to 28th Feb 2004.
Alternate E-mail : kesavangrt AT gmail.com
HOBBIES :
Music, Reading books and playing volley ball.

[Guest]

Antony Wilson. J

Mail : antonywilson007 AT gmail.com

OBJECTIVE :
To improve and develop my knowledge and ability by working with developing organization with challenging opportunity and achieve company’s growth and personal growth.
BASIC
I am a Mechanical engineer having 2 years of experience in engineering industry in Projects, Machine shop, Assembly, production planning and control, Product development, process improvement, Industrial engineering and a lot a lot in Quality Control activities.
EXPERIENCE AS FOLLOWS
1. Indiana gratings and conveyors pvt.ltd. , Jejuri
Quality Control Engineer (from March 2011 till date).
I am working as a senior Engineer in Quality Control Department.
We have 4 units in Jejuri. Three are for steel grating manufacturing and one for steel fabricated structural beam. I am heading this department for our units.
Basic Functions : Attend Quality targets Meeting. Cross checking design document and drawings. Maintain cost control. Control Quality in My area & boost production output with client requirement. Maintaining Documents for my all activities. Control Human resources (Direct and Indirect labor). Ensure better utilization of all resources. Establishing new activity improving machine life.
Organizational relations : Reports to Quality Control Manager.
Working relationships to – Production Planning
Supervisor, Preparation Supervisor, Site Engineering
Supervisor, Foreman, Maintenance, Site Supervisor, Safety
Establishments :
1. Welding Procedures (WPS)
2. Procedure Qualification Records (PQR)
3. Welder/Welding Operator Performance (WPQ)
4. Quality / Production Reports etc
Third Party and Customer Handling
- Individually able to handle the Customer and the Third Party Inspector.
- Able to handle the Inspection as per AWS standard and Indian Standard.
Customers
- BHEL
- SUZLON
- THERMAX
- L&T
- TATA BLUE SCOPE STEEL Pvt Ltd
- GEODESIC ( Mumbai Airport Project)
Coordination
- Coordinate with Production Dept. & Project Management for Schedules and Priorities.
- Coordinate with Planning Department for revisions, drawing clarifications and change in design or connections.
- Coordinate with Preparation department, Fit-up/Welding/Final Hand Over departments for phase closing / project completion.
- Coordinate with Painting Dept., Blasting/Painting/Shipping departments for phase closing / project completion
Planning/Organizing
- Set priorities for Jobs based on :
- Job priorities from the Production Planning.
- Current Backlog situation.
- Materials for MTC certificate.
PERFORMANCE :
- Good relation to low level and top level of management
- Feedback to improve Production, Quality in economic scope
- Co-ordinate to Third Party Inspection / Customer Inspection
Controlling/Utilization of resources
- Monitor periodic utilization reports of all welding, fit-up and Painting works.
- Co-ordinate with Maintenance to take corrective actions in case of machines with very high downtime. If necessary, Calibration Status Check.
- Maintaining a comprehensive ASME, AWS, ASTM and ISO procedures.
Facilitate Cost Reduction
- Instruct Production Engineers to ensure optimum usage of consumables & tools and to eliminate wastages of filler wires, welding electrodes, Acetylene, Oxygen, CO2 and Painting material by correct flow usage,
- Ensure maximum utilization of manpower, space and equipments.
Administration
- Approve disciplinary action (if any) based on Site Engineers comments to ensure workplace safety, good employee conduct etc.,
- Recommend rewards (citation/certificate/monetary benefits) to motivate good performers.
- Monitor and conduct periodic review of the performance of all the employees.
- Clarify the above mentioned departmental objectives to Production Engineers and ensure productivity of all resources.
Process improvements/Speeding profitability :
- Design, developing and recommend new Jigs and fixtures for fabrication.
- Design and developing and recommend /lifting /turning handling tackles and tools.
- Design, developing and recommend weld distortion control devices.
- Arrange periodic employees training programs in new welding procedures new fitting methods, New painting System drawing reading and training in automatic welding machines.
Authority
- Instruct Production Engineers and Site Engineers to initiate specific actions to meet Quality.
- Weekly once arrange meeting for my department regarding Quality Issues.
- Approve issuance of consumables and tools.
- Set Job priorities.
- Approve disciplinary actions.
Quality :
o Ensuring the adherence to quality standards requirements across the shop floor.
o Overseeing implementation of quality systems to streamline and standardize work flow.
Responsibilities as follows
- Preparing Welder Qualification.
- As per Quality Manual, Quality System Procedures and Quality Documents
- And also as per Customer Quality Requirement, Plans
- Production plan Approval
- *Production process controls and activities
- *Quality Control Activities
- *Selection, Preparation and Painting Procedures
- *Selection of appropriate NDT methods
- *Self Inspection of Boiler Components (BHEL)
- *Worker Management and Good Relation
- Capacity calculations of plant
- Work study
- Time study and production norms fixing
- Preparing plant lay out
- Selection of new machines
- Searching machine suppliers and negotiating prices.
- Trials on new machines and handing over to production dept.
- Improving process by reducing non value added time.
- Weekly MIS reports of all plants.
2. Edwin Raja Engineers, Mahendragiri. (from July 2010 to February2011)
This Experience was in INDIAN SPACE RESEARCH ORGANISATION at Mahendragiri.
I have joined this company in project stage.
Ours is a separate business unit for Fabrication and erection.
I am responsible for
* Production development
* Installation of machines
* Vendor development
* Price negotiation
* Make or buy decision
*Quality Control and Production planning
* Customers follow up
* Attending customer complaints
Establishment :
I have established the site MET in Fabrication and in Erection in my Heading. I had a team of 30 welders and 12 Fitters and 42 helpers to complete the work in 3 months by arranging three Shifts.
WORK DONE :
The work was the fabrication and erection in PIPE LINES. We did all kinds of Pipe line fabrication (SS & MS). I was acting as Quality Control Engineer and Plant Head for my Company in the Plant. Starting from Raw material to Erection work it was my Scope.
3 : VASAN ENGINEERING INDUSTRIES, TRICHY(from JUNE2009 to JUNE 2010) (Quality control Engineer)
I had worked with Vasan Engineering Industries.. This company is located at Mathur near trichy. We are one of the Sub contracts for the Bharat Heavy Electronics Ltd (BHEL).
The work which we did was Structural Fabrication.
Period details and history
1. Joined this company in JUNE 2009 as Quality Supervisor later I got promotion as Quality Control Engineer in three months.
2. Went to BHEL through company for one month for rectification work on the job Wind Box which was done by another company.
3. Then after that My Company got an award for doing Wind Box Quickly and Perfectly in BHEL because of me.
PRODUCTS
- Boiler Components
- Fabrication Components of Non Pressure Parts up to 500 MW
- Structural of Main Column, Bracing, Structural members, etc.
- Fluid Path of Ducts, Hoppers Bellows etc.
- Wind Mill Tower
- T.T Burner Assay
- Wind Box
Customers
- BHEL
- SUZLON
- THERMAX
- L&T
Responsibilities
1. Achieving dispatch targets
2. Day to day activities of department
3. Follow up with planning, purchase departments
4. Floor planning and line balancing
5. MIS report
6. Prepare production orders, release orders to shop floor, schedule, rout cards, updation of orders, prepare parts requirement list for next three months and distribute to concern departments, follow up with all departments, planning of dispatch schedule.
7. Maintaining Day Book Register and Dimensional Report.
Other activities
1. Active participant in time study on all details regarding WELDING
2. Making Welder Qualification.
3. Teaching Welder regarding Welding.
4. Do the Welding also if there is absence of Welders.
5. Able to do weld in 2G position
Educational qualification details :
- Diploma in MECHANICAL Engineering in Pastor Lenssen Polytechnic College, DON BOSCO INSTITUTION Kuthenkuly
- SSLC in St. Ann's Matriculation higher Secondary School, Panagudi with 70%.
- NDT Courses (RT, UT, MT, PT) at SEA HUB NDT SERVICES, Vallioor.
- Safety Courses (PSSR, PST, EFA, HUET, FPFS) at SNS Maritime Institute, MUMBAI
Computer knowledge
Operating system : DOS, Windows XP, SAP functions related to production
Application software : MS-Office2003, AUTOCAD, MS PROJECTS
DECLARATION
I certify that the above information given by me is true to the best of my knowledge. If given a chance I will work with all my effort for the growth of the organization.
PLACE : Vallioor
DATE : (Antony Wilson. J)

[Guest]

CURRICULUM VITAE
NAME : DIBYAGYOTI MONDAL.
EMAIL ADDRESS : raj.dibyo1989 AT yahoo.in
- Career Objective :
To be work as an Accountant.
- Current Status :
I am a B.Com. (Hons) graduate from Calcutta University with (1+1+1) System. At present I am working in a Cable Manufacturing company RATAN PROJECTS & ENGG.CO.PVT.LTD. as an Assistant Accountant.
- Educational Qualification :
Board/University Year Examination Percentage
Calcutta University 2007-2010 B.Com. (Hons) 54%
WBCHSE 2007 Higher Secondary 72%
WBBSE 2005 Madhyamik 58%
- Other Qualification :
Course Year Institute Course Contains
Computerized Financial Accounting 2009 Ramkrishna Mission Shilpamandir MSword,Excel,
Tally,Fact,Ace,
Accord,Internet
PCAT Course
(Continued…) 2010-2012 Bengal Tax Council (TCE) E-filling of ITR VAT,CST,SERVICE TAX, TDS, EXCISE,ESI,PF & E-WAYBILL,‘C’ FORM GENERATION etc.
- Work Experience :
1) Company Name :- Ganesh Gears Pvt. Ltd.
Duration :- June to Nov’2010 = 6 months
Responsibilities :- Normal Voucher, Journal,
Non-Excise Purchase,Sales Entry
TDS Entry. (In Tally – 9)
2) Company Name :- Ratan Projects & Engg. Pvt. Ltd.
Duration :- Dec’2010 to At Present
Responsibilities :- Cash & Bank Related all Entries,BRS,
Normal Voucher,Journal,Non- Excise & Excise Purchase-Sales Entry,Job Bill Entry(In Oracle)
- Declaration :
All of the above statements are made with best of my knowledge and honesty
Place : Bally, Howrah
Date : 01/02/12
(SIGNATURE)

[narendra5104]

Narendrakumar H. Bhanushali
E mail : narendra5104 AT gmail.com
narendrabhanushali01 AT gmail.com

Career Objective :
To apply my logical strengths, implement innovative ideas and work on challenging tasks in a motivating environment through constant gain of knowledge.

Experience Present :
Global Wind Power Ltd, Silvassa :
July. 2010 to till date.
An ISO 9001 – 2008, ISO – 14000:2004 and OHSAS – 18000:2007 Company, Sister concern of Reliance Capital (ADA Group).

Present position : Production Engineer.
Date of joining : July 2010 to till date
Job Description :-
- Worked in heavy fabrication unit.
- Involved in Production activities for fabrication of tubular wind mill towers for Vestas India Ltd., General Electric Energy, Norwin -Denmark, Lagarwey - Germany and Kenersys – India and Furlander – Germany.
- Knowledge of various weld procedures like GTAW, SAW, SMAW, GMAW.
- Familiar with various NDT, like Visual Inspection & Liquid Penetrate Testing.
- Programming for CNC Cutting Machine with Omni Cad & Omni Bevel software.
- Looking after various Processes Shell formations Dept. (i.e. CNC Cutting, Rolling & L/S welding).
- Maintaining all Production document for ISO 9001- 2008.
- Attended ISO – 14000:2004 and OHSAS – 18000:2007 Training Programs and also the documentation preparation for same.
- System implementation and compliance.
- Monitoring the welding processes.
- Manpower utilization in shift at shop floor to meet target production.
- Processes improvements.
- Planning and production in each shift on the shop floor.
- To archive the production target, man power utilization.
- Working on SAP, preparing purchase indent, clearance of GRN, Material requisition etc.

Education Qualification :
Course Discipline Board/University Passing Year Percentage
B.E. Mechanical Veer Narmad South Gujarat University JULY 2010 66.45%
HSC Science
Gujarat Board MARCH 2005 56.00%
SSC Gujarat Board MARCH 2003 90.00%

Project Undertaken :
1) Working Model of Pneumatic press
Description :
- Pneumatic press has been designed to shape or cut metal by applying mechanical force or pressure.
- Its uses compressed air instead of regular hydraulic press, and have higher efficiency and lower cost compared to hydraulic press.

Seminar Undertaken :
1) Hyper car Description :
- The hyper car design concept combines an ultra light, ultra-aerodynamic auto body with a hybrid-electric drive system.
- It’s Eco friendly, less emission, recyclibity, fuel efficient.

Course Covered :
Engineering : - FORGING, CARPENTERING, FITTING, LATHE WORK, WELDING.

Computer : -
- AUTOCAD.
- MICROSOFT OFFICE, OPEN OFFICE.
- OMINI CAD & OMINI BEVELE software for CNC Cutting Machine programming.
- SAP Business one
+ Qualified internal auditor for ISO – 9001 :2008.
+ Qualified internal auditor for ISO – 14000 :2004 and OHSAS – 18000:2007.
+ Level - II (as per ASNT) in PT. [Liquid penetration testing]

Hereby, I declare that the above-mentioned details are correct to my knowledge.
NARENDRAKUMAR H. BHANUSHALI.

[Unregistered]

Sumon Adhikary
Email : sumonadhikary AT gmail.com

Aspiration :
To attain a satisfactory and dignified career platform by working with a reputed concern, while striving for the organizational benefits

QUALIFICATION :
Diploma in Mechanical Engineering
Degree Passing Year Institute/ University/ Council % :
Diploma in mechanical engineering 2010 West Bengal Council of Technical education 72.8
Standard 12 2005 West Bengal council of higher secondary examination 54.7
Standard 10 2003 West Bengal board of secondary education 71.8

WORK EXPERIENCE :
One and half years experience as Engineering Assistant and Quality Control personnel
Organization/ Area Duration Designation From To :
Excel Enterprises Oct 2012 Till Date Sales Engineer
Force Motors Limited May 2011 May 2012 Diploma Engineer Trainee, Quality Control, Body shop
Levcon Instruments private limited Oct 2010 April 2011 Engineering Assistant, Production Unit

PROFESSIONAL SYNOPSIS :
1. Independently responsible for ‘TRAX’ Body Quality of Force Motors including
a) Jig and fixture improvement
b) Process improvement
c) Product audit
d) Maintaining and review of supervisor check-sheet
e) Chronic problem analysis
f) Press part check according to drawing
g) Giving feedback to press shop
h) Handle customer complaint of paint shop and assembly shop

2. Responsible for Welding Quality including
a) MIG welding, SPOT welding
b) SEAM welding parameters
c) Checking of MIG, SPOT, SEAM welding machine
d) Coordination with maintenance department for correction

3. Have knowledge of 5S

PERSONAL DETAILS :
Date of Birth : 8th May, 1987
Sex : Male
Languages known : English, Hindi, Bengali
Nationality/ Religion/ Category : Indian, Hindu, Scheduled Caste
Father’s Name : Joydeb Adhikary
Marital Status : Bachelor

I hereby declare that all the information provided by me in this application is factual and correct to the best of my knowledge and belief.
Sumon Adhikary
01st April, 2013

[Unregistered]

Dear sir

I went to apply for fitter post .I have pass ITI FITTER
From Pursuraha govt ITI In the year 2019


My biodata is attached with this mail .

Regards

Santu Porel