ICOMM Tele Ltd Ranchi , Orissa : Erection, Execution, Planning Site Engineer

[mskavi]

ICOMM Tele Limited Ranchi , Orissa : Site Engineer
Website: http://www.icommtele.com

Keywords: Site Engineer / Project Engineer / Sr. Engineer / Engineer

Designation: Site Engineer
Experience: 2 - 6 Years
Location: Ranchi , Orissa
Compensation:
Negotiable
Education:
UG - B.Tech/B.E. - Electrical
PG - M.Tech - Electrical
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Site Engg., Project Management
Posted Date: 01 Jun 2009

Job Description:
Responsible for the Site Execution , Planning, Coordination , Contractors, Supply and Erection , Stores & Materials.

Desired Candidate Profile:
Should be a Graduate Electrical, Conversent with Lines and Sub Stations Power projects, IT literacy, Knowledge of modern maintenance techniques,

Company Profile:
ISO 9001:2000 certified,with 3000 employees & Rs.1800 corers turnover. Pioneers in Telecom, Power transmission &distribution Infrastructure Turnkey service equipment Mfg for Cellular,Fixed,Internet in India&Abraod.

Executive Name: Mr. D N Pavan Kumar

Address:
Not Mentioned

Email Address: hr@icommtele.com

Telephone: 09052002346

Reference ID:
ICOMM/Power Projects/Engineer - Orissa / Ranchi

Keywords: Site Engineer / Project Engineer / Sr. Engineer / Engineer

[Guest-IJT]

POST APPLIED FOR SR. DESIGN ENGINEER / PROJECT COORDINATOR (HVAC / PLUMBING)
SACHIDA NAND BHATT
House no. S 2, 4/236
Vaishali, Ghaziabad (U.P.) – 201010
Contact No. – 0120 – 4115468 (Res.)
Mob. – 9899024003
E- mail: - snub23 AT rediffmail.com
snummb AT yahoo.com
s.n.bhatt AT hotmail.com

Date of Birth : 01/04/1968 Marital Status : Married with two children
Passport No. : G –6257207 issued on 02/01/2008 at Ghaziabad and valid up to 01/01/2018
ABOUT MYSELF
Educational Qualification
Name of Board / University Year of Passing Name of Examination Passed
U. P. Board Allahabad 1984 High School
I.T.I. Srinagar (Garhwal), U. P. 1987 Draughtsman Mechanical
Rajasthan Vidyapith University 2010 Diploma in Mechanical Engineering
Rajasthan Vidyapith University Pursuing B. Tech –Mechanical
Total Experienced : 22 years (17 years in India and 5 years abroad-Gulf & U.S.A.)
Computer Literacy : AUTO CAD 2010, Cad Duct, Revit & Elite software for Load Calculation
Career Objective
I endeavor to excel in my profession and work towards achievement of goals for the organization and of my personal goals as a co – operative effort. I am a team person who fully believes in and practices the principles of team efforts towards effective and efficient fulfillment of the job at hand.
Remuneration Details
Present Salary Drawn : Rs. 8.40 Lack C.T.C. / Annum
Salary Expectation : Negotiable
Cont…….2
WORKING EXPERIENCE FOR MNC (IN INDIA)
Organization Name Designation and Period of Service Working Activities for Particular Firm
Hastie International Pvt. Ltd. (MNC)
B-29, Sec-63,
Noida, U. P. Project Coordinator cum Sr. Design Engineer
HVAC and Hydraulic
10/08/2009 to 30.08.2010
Deals with main contractors & sub contractors, close coordination with client / MEP consultants and its authorized representative. Coordinates between India design office to Abu Dhabi site office for settle down technical issue in between, reviews and comments drawings prior issuance to the concerned parties, attends technical and progress meeting at the site likewise record the minutes of meeting. Submits drawings to the client after approval from MEP concern engineers & reports to the project manager / Engineering Manager for the same. Giving Instructions, Guidance & tips to the India’s CAD team for the production of High Quality Shop Drawings within the specified time & need of the management. Preparing time schedule for drawings to meet the target. To give Instruction to Document Controller to maintain drawings status. Being a coordinator between site issues & drawing issues, getting the input from engineers as a technically issues & finding solutions the same.
Some of the Major Project for Middle East (UAE) where I have involved:
Sl. No. Name of the Company Name of the Project Types of Project
(Working Activities)
1. Hastie International Pvt. Ltd. (MNC)
Zayed University, Abu dhabi, UAE University (Shop Drawings preparation for HVAC & Plumbing)
WORKING EXPERIENCE FOR MNC (IN INDIA)
Organization Name Designation and Period of Service Working Activities for Particular Firm
Luminous Engineering & Technologies Services,
(MNC)
B-29, Sec-63, Noida, U.P.
Van Boerum & Frank Associates, Inc.
330 South 300 East
Salt Lake City, Utah
84111 Project Coordinator cum Sr. Design Engineer
(HVAC / Plumbing )
05/07/2007 to 09/08/2009 Plumbing Skills: Well experienced in Plumbing design calculations such as Water Supply, Soil, Waste, Vent & Storm Water disposal systems and Basement Drainage & Pumping. Frictional loss in pipe, size of pipe & its velocity calculations as per Darcy’s & Hazen Williams formula and also calculate Frictional Loss in fittings, valves as per graph, total Pumps head loss due to friction, Power of Pumps. Design for sprinklers systems, Hydrant systems (Internal & External). Produce hydraulic calculation. Calculate the rate of discharge for sanitary fixture and Hydraulic gradient or slope of pipes as per Manning’s equation. Design of flow rate of water requirements per person for recommended occupancy.
HVAC Skills: Good knowledge of designing for HVAC systems (Hydronic closed & open system piping & low, medium & high pressure Duct design with constant friction loss method). Load Calculations (Heating & Cooling) from Elite software. Used of Psychometric Chart for the Air Conditioning system. Pressure loss calculation due to friction in pipe, fittings, valve, duct & duct fittings etc.
Study for code & standards for Mech. & Plumbing. Selection for all Plumbing & HVAC Equipment and make its schedule & datasheets. Drawings checking & taken the approval from client. Planning these services includes preliminary and detailed design engineering, specifications, selecting of material, estimating cost, review tender documents and selecting contractors.
Cont…….3
Some of the Major Project for USA where I have involved:
Sl. No. Name of the Company Name of the Project Types of Project
(Working Activities)
1. Luminous Engineering & Technologies Services Patron Housing, Salt Lake City, Uttah, U.S.A. Temple (Heat Load Calculation & Design of HVAC & Plumbing)
2. Luminous Engineering & Technologies Services Atlanta Tower, Salt Lake City, Uttah, U.S.A. High Rise Building (Design of HVAC & Plumbing)
3. Luminous Engineering & Technologies Services Alpine Junior High School, Salt Lake City, Uttah, U.S.A. School Building (Design of HVAC & Plumbing)
4. Luminous Engineering & Technologies Services LDS Hospital, Salt Lake City, Uttah, U.S.A. Hospital (Heat Load Calculation & Design of HVAC & Plumbing)
5. Luminous Engineering & Technologies Services Leh Elementry School, Salt Lake City, Uttah, U.S.A. School Building (Design of HVAC & Plumbing)
6. Luminous Engineering & Technologies Services PCMC House, Salt Lake City, Uttah, U.S.A. Office Building (Heat Load Calculation & Design of HVAC & Plumbing)
7. Luminous Engineering & Technologies Services McKay Dee OB Clinic, Salt Lake City, Uttah, U.S.A. Hospital Building (Heat Load Calculation & Design of HVAC & Plumbing)
8. Luminous Engineering & Technologies Services Moran Neuroscience Clinic, Salt Lake City, Uttah, U.S.A. Clinic Building (Heat Load Calculation)
9. Luminous Engineering & Technologies Services Primary Children's Medical Center, Salt Lake City, Uttah, U.S.A. Hospital Building (HVAC & Plumbing)
10. Luminous Engineering & Technologies Services San Salvador, Salt Lake City, Uttah, U.S.A. Temple (Heat Load Calculation)
WORKING EXPERIENCE OF AIR CONDITIONING FOR PHARMACEUTICAL INDUSTRIES (IN INDIA)
Organization Name Designation and Period of Service Working Activities for Particular Firm
ATE Projects Pvt. Ltd.
Laxmi Nagar
New Delhi Project Coordinator cum Team Leader (HVAC)
29/06/2006 to 04/07/2007
Involved in preparing various types of Coordination Drawings, Planning, Organizing, Directing, Monitoring, & Controlling the CAD team through the various activities of a project. Implementing new CAD Standards to increase the quality of drawings up to the ISO Standard. Giving Instructions, Guidance & tips to the CAD team for the production of High Quality Shop Drawings within the specified time & need of the management. Preparing time schedule for drawings to meet the target. Ensuring the Sub contractors are following the standards & regulations of the project. Conducting meetings about various subjects like, improving the quantity & quality of drawings, to improve each member’s communication skills, to know the status of the work & make all the team members involved in decision-making which makes to set the goal clear for each member. Motivating the Team through various ways with the help of the management. Implemented new way of increasing production through a financial & psychological approach to the team to get higher output with good Cad Standards.
Cont…….4
List of Major Project of Pharmaceutical or related Industries where I have involved:
Sl. No. Name of the Company Name of the Project Types of Project
(Working Activities)
1. ATE Projects Pvt. Ltd.
Shelys Pharmaceutical Ltd, Tanzania, Abroad Shop Drawings of HVAC for Pharmaceutical Industries
2. ATE Projects Pvt. Ltd.
Cachet Pharmaceutical Ltd, Baddi, H.P Shop Drawings of HVAC for Pharmaceutical Industries
3. ATE Projects Pvt. Ltd.
Cachet Pharmaceutical Ltd, Bhiwari, Rajasthan
Shop Drawings of HVAC for Pharmaceutical Industries
4. ATE Projects Pvt. Ltd.
Ind-Swift Laboratories Pvt Ltd, Baddi, H.P
Shop Drawings of HVAC for Pharmaceutical Industries
5. ATE Projects Pvt. Ltd.
Panacea Biotec Ltd, Lalru, Punjab
Shop Drawings of HVAC for Pharmaceutical Industries
6. ATE Projects Pvt. Ltd.
Panacea Biotec Ltd, Okhla, Delhi
Shop Drawings of HVAC for Pharmaceutical Industries
WORKING EXPERIENCE (IN ABROAD)
Organization Name Designation and Period of Service Working Activities for Particular Firm
International Air Conditioning & Refrigeration Co. L.L.C.
P. O. Box no. – 364,
Postal Code – 111, Muscat (OMAN) Senior Draughtsman Mech. (HVAC & Plumbing )
24/06/2004 to 23/06/2006 A well experienced in similar field with ability to design, draft & produce the drawings independently as a job necessitates. The preparation of Schematic diagram of chilled condenser water system for Central Plant and Co – ordination of other trades such as electrical and plumbing then make its composite dwgs. As built drawing & Detailed Shop dwgs. (Making the opening size for all ducting / piping in wall & floor, All necessary Dimensioning, Location of VAV, with its Tag No., Access Door) including layout of Pump room, Ahu Room, Fan Room, Package Units, Schedule of Equipment / Air device & B.O.Q. for Pipe, fitting & Valve Based on consultant’s dwgs. In order to make the Drainage, Rain water, Venting, Cold & Hot water supply layout with sectional views of Air Conditioning, Ventilation, Smoke Exhaust systems showing exact location of fire damper, volume control damper, Split damper, VAV, Access Door, various Diffuser / Grilles / Register (Supply, Return & Exhaust) and HVAC related accessories.
Some of the Major Project where I have involved:
Sl. No. Name of the Company Name of the Project Types of Project
(Working Activities)
1. International Air Conditioning & Refrigeration Co. Bar – al Jissah, Muscat (Oman) Hotel – Town, Village & Castle (HVAC & Plumbing)
2. International Air Conditioning & Refrigeration Co. Qasr – al – alam, Guest House, Muscat (Oman) King Palace (HVAC & Plumbing)
Cont…….5
WORKING EXPERIENCE (IN ABROAD)
Organization Name Designation and Period of Service Working Activities for Particular Firm
Kuwaiti Tech Consultants
Fahed Al – Salem Street, Kuwait City Senior Draughtsman Mech. (HVAC & Plumbing)
18/07/2001 to 14/06/2004 Detailed Engineering & working drawing like water supply piping layout, (for Toilet, Kitchen, Pantry & Bath Shower etc.), Drainage layout (for Toilet, Kitchen, Pantry & Bath Shower, Pump Room & Ground Floor Area etc.), Storm Water system, Fire Fighting piping layout and Air conditioning Ducting layout (for Supply / Return / Fresh / Exhaust air and Smoke Ventilation), Computerized Area calculating for particular A/C Area, Schematic Diagram for the systems and Ahu air balance, Material take off, equipment Schedule (Ahu / Exhaust Fan / Split Unit / air & Water cooled package unit / Window unit / Pumps / Filters / Water Heaters / Water Storage Tank) including sizing of piping, ducting and other necessary requirements the same Project for high rise Commercial & Residential building, Swimming pool, Sports club, commercial & Entertainment complex.
Some of the Major Project where I have involved:
Sl. No. Name of the Company Name of the Project Types of Project
(Working Activities)
1. Kuwaiti Tech Consultant B.B.K. Commercial Building, Kuwait Commercial Building (HVAC & Plumbing)
2. Kuwaiti Tech Consultant Al – Watia Tower, Kuwait City High Rise Building (HVAC & Plumbing)
3. Kuwaiti Tech Consultant College of Health Science – Boys, Kuwait College Building (HVAC & Plumbing)
4. Kuwaiti Tech Consultant Al – Fatah Club, Khaldiya, Kuwait Swimming Pool (Plumbing)
5. Kuwaiti Tech Consultant Al – Sayer Group, Free Zone, Kuwait Office Building (HVAC & Plumbing)
6. Kuwaiti Tech Consultant Ware House, Shuwaikh Indl. 3, Kuwait Shops (HVAC & Plumbing)
7. Kuwaiti Tech Consultant Wastee Commercial Complex, Syria Entertainment Complex (HVAC & Plumbing)
WORK EXPERIENCE (IN INDIA)
Organization Name Designation and Period of Service Working Activities for Particular Firm
Modern Air Conditioning co. (P) Ltd.
Pratap Nagar, New Delhi - 110064 Senior Draughtsman Mech. (HVAC)
15/04/1998 to 30/06/2001 A well experienced in similar field with ability to design, draft & produce the drawings independently as a job necessitates. The preparation of schematic diagram of chilled / condenser water for Central Plant and Co – ordination of other trades such as electrical and plumbing then make its composite drgs. Detailed shop drgs, then As built dwg. Including layout of Pump Room, ahu Room, Fan Room, Package Units, Equipment Data & B. O. Q. for Pipe, fitting & Valve based on consultant’s dwgs. In order to make Piping / ducting layout with sectional views of A/C, Ventilation, Exhaust systems showing exact location & selection of fire damper, Volume control damper, Split damper, VAV, Access Door, various Diffuser / Grilles / Register (supply, Return & Exhaust) and HVAC related accessories.
Cont…….6
Some of the Major Project where I have involved:
Sl.No. Name of the Company Name of the Project Types of Project (Working Activities)
1. Modern Air Conditioning Co. (P) Ltd. Escorts Heart Institute, New Delhi Hospital (HVAC)
2. Modern Air Conditioning Co. (P) Ltd. Krishna Resorts, Jalandhar City Multi Storied Resort (HVAC)
3. Modern Air Conditioning Co. (P) Ltd. Grandley Cinema, New Delhi Cinema / Shopping Mall (HVAC)
4. Modern Air Conditioning Co. (P) Ltd. Amritsar Hospital, Amritsar Hospital (HVAC)
5. Modern Air Conditioning Co. (P) Ltd. Hotel Imperial, New Delhi 5 Star Hotel (HVAC)
WORK EXPERIENCE (IN INDIA)
Organization Name Designation and Period of Service Working Activities for Particular Firm
Dalal Cunsultants & Engineers Limited.
Okhla Industrial Area, New Delhi - 110020 Senior Draughtsman (HVAC & Plumbing)
21/09/1994 to 14/04/1998 Detailed Engineering & working activities like making the concept dwgs. of Drainage, Rain Water & Water supply Piping layout and A/c Ducting layout including Material / Equipment Schedule, B.O.Q. sizing of piping / ducting area calculation for system and other necessary information which is required the same for high rise Commercial and Residential Building, Hospital, Multi Storied Resort, Cinema Hall, Hotel & Shopping Mall Complex etc.
Some of the Major Project where I have involved:
Sl.No. Name of the Company Name of the Project Types of Project (Working Activities)
1. Dalal Consultants & Engg. Ltd. Haldia Petrochemicals, Haldia Petrochemical Plant (Oil & Gas piping)
2. Dalal Consultants & Engg. Ltd. IOCL, Patiala LPG Bottling Plant (Piping)
3. Dalal Consultants & Engg. Ltd. IOCL, Mathura Refinary Hydro cracker unit (Oil & Gas Piping)
4. Dalal Consultants & Engg. Ltd. Daewoo Anchor Limited, Noida Electronic Factory (HVAC & Plumbing)
WORK EXPERIENCE (IN INDIA)
Nisag Fire System
Green Park Extn. New Delhi - 110017 Draughtsman Mechanical (Fire Fighting)
01//01/1988 to 31/08/1994 Fire Fighting work supervision and installation of its piping & pump house at site and preparation of shop drawing, As Built dwgs. based on consultant’s dwgs & coordinating of the work with that of other trades then take the approval from client for sprinkler and Hydrant (Internal & external) System for Hotels, Hospitals and Multi Storied Building as per TAC rule & regulation.
Some of the Major Project where I have involved:
Sl.No. Name of the Company Name of the Project Types of Project (Working Activities)
1. Nisag Fire System S.G.S. Thompson, Noida Office Building (Fire Fighting)
2. Nisag Fire System Radison Hotel, New Delhi 5 Star Hotel (Fire Fighting)
(SACHIDA NAND BHATT)

[Guest]

DEEPAK KUMAR JHA
Email ID : - deepakjha_oec AT yahoo.co.in
________________________________________
OBJECTIVE
- Seeking a middle level position in Electrical Engineering domain in core technical industry Steel/Iron/Cement. Design Engineering. Production and Manufacturing Field.
- Look forward to gain variety of experience during my career progression and use my knowledge and skill that I have gain during my previous work and in college.
WORK EXPERIENCE (Two Years Eleven Month)
Bengal Energy Limited, Kharagpur, (1st. July 2008 – Present).
This is an ISO CERTIFIED limited Integrated Steel Plant. I had join this organization as a Project Trainee in Green field turnkey Power Project of 132 kV / 33kV / 6.6kV / 0.415 kV Substation And 2X40 MW Waste Heat Recovery Power Plant. After completion of Project now I am involved in day to day Maintenance of switchyard & S/S.
Currently working as an Engineer (E & I) in 0.6 MTPA non Recovery type Coke Oven Plant and RMHS.
Current Salary : - 4.032 Lac p.a Expected: Negotiable
JOB PROFILE :-
- Project work of 132/33 kV grid substations, 33/6.6 kV Indoor type switchyard, 33/0.415 k V Substation. Co-ordination with consultant CECON and vendor AREVA T&D India Ltd. This is a turnkey power project.
- Erection of 50/63 MVA, 40/50 MVA, 10/12.5 MVA power transformer. Bushings erection, Conservator and radiator mounting. Switchyard equipment erection Like CT, PT, CVT, LA, Isolator, SF6 & Vacuum Circuit Breaker, Wave Trap. Involved in Testing of all Switchyard Equipment.
- Design of Cable trench, Cable tunnel, Control room illumination and panel Erection, cable scheduling, laying and termination. Making B.O.M, B.O.Q of Entire Project.
- Commissioning of 2 X 40 MW WHR Power Plant. 11 kV switchboard panel erection of Power plant side. 6.6/ 0.415 kV PMCC and MCC of Cooling Tower and Boiler MCC Panel Erection.
- Comfort to work in both field H.T and L.T line with complete execution of work Plan.
- Project, Operation and Maintenance of 0.6 MTPA non recovery type Coke Oven Plant. Here work with DCS and PLC system, Process instrumentation i.e. Thermocouple, Level and Pressure transmitter, LVDT etc. Commissioning of Charging Car, Pushing car, Hot coke Car, Mobile Hopper.
- Key member of Project team as well as operation and maintenance work of Row Material Handling System. Commissioning of L.T and H.T motor. AC and DC drive, various type of starter, Belt conveyor, Re-claimer and Stacker commissioning. Wagon Tripler Commissioning
- Commissioning of 100MT and 40 MT road weigh Bridge with complete work Execution. Now Maintenance of both Systems.
ACADAMIC :
- B.Tech (Electrical Engineering) from Orissa Engineering College, Bhubaneswar (2004 – 2008) with 7.25 CGPA.
- Intermediate from B.S.S College Supaul with first class.
- 10th. From Williams’ high school Supaul with first division.
PROJECT WORK ( B.Tech )
Made a static Over Current Relay. This type of Relay is not consisting any Movable Part. Only Static element is used to make this relay.
TRAINING
- I have accomplished my summer training at Central Electricity supply unit, Bhubaneswar, An Orissa state govt. Organization. This training was based Upon Power Distribution system of urban and sub-urban area.
- Attained a training program at IIPM, Kansbahal , Rourkela ( Orissa ) on Title “Maintenance of Electrical Equipment Transformer, Motor and Switchyard.”

PAPER PRESENTATION
Sulphar Hexafluoride (SF6) Circuit Breaker and Pole Mounted Substation.
SOFTWARE SKILL

- Proficient in Computer programming language C and C++.
- Have work idea about Data Communication and Computer Networking.
- Efficient to work in MS Office. Window 7, Window XP, RDBMS, DATA Structure.

[Guest]

RESUME
UPENDRA MOHANTY
Email : um1200901 AT gmail.com
CAREER OBJECTIVE
To secure a challenging position in an organization that allows me to prove the best of my technical knowledge and abilities & ideas in an Industry.
EDUCATIONAL QUALIFICATION
Course /Branch Institution Board / University
% Of marks Year of passing
DCA PACE COMPUTER EDUCATION PACE COMPUTER EDUCATION 72 2011
I.T.I
(ELACTRICIAN)
BAISINGA,
MAYURBHANJ S.C.T.E & V.T, ORISSA
79.57

2007
INTERMEDIATE ARTS
M.G.M,
BAISINGA
MAYURBHANJ C.H.S.E, ORISSA
43 2000
HIGH SCHOOL
CETIFICATE
EXAMINATION SAHUPADA HIGH SCHOOL,
BALASORE B.S.E, ORISSA
44
1998
PROFESSIONAL QUALIFICATION
Advanced Certificate Course in Electrical Wiring.
PROFESSIONAL EXPERIENCE
Currently working as Site Supervisor in M/s. Jyoti Structures Limited in a RE Project under RGGVY scheme in Balasore district of Orissa.
Have 4 years experience in survey, erection of HT and LT lines and Distribution Transformers, O/M of Domestic Inverters, house wiring.
I hereby declare that the information furnished above is true & correct to the best of my knowledge and belief.
Place : Balasore
(Name of the applicant)
Date :