Harita TVS Technologies Ltd Chennai : CATIA V5 DESIGN ENGINEER WALK-IN

[mskavi]

Harita TVS Technologies Limited Chennai : WALK-IN INTERVIEW(23/05/2009) FOR CATIA V5 DESIGN ENGINEERS @ CHENNAI
Website: http://www.haritatvs.com

Keywords: Catia V5,Catia,CatiaV5,automotive

Designation: WALK-IN INTERVIEW(23/05/2009) FOR CATIA V5 DESIGN ENGINEERS @ CHENNAI
Experience: 2 - 4 Years
Location: Chennai
Education:
UG - B.Tech/B.E. - Mechanical,Diploma - Any Specialization
PG - M.Tech - Any Specialization
Industry Type: Auto/Auto Ancillary
Functional Area: Engineering Design, R&D
Posted Date: 19 May 2009

Job Description:
The candidate will be responsible for modeling and creating 2D drawings for automotive domain projects.

Desired Candidate Profile:
Job Description:

Designation: Design Engineeer

Qualification : BE/BTech/Diploma

Experience : 2-4 yrs

Skill : The candidate should have hands on experience in
Catia V5, Modeling & creating 2D drawings.

Job Location: Chennai

Date: 23/05/2009 ( SATURDAY)

Timing : 9.00 AM to 4.00 PM.

WALK-IN VENUE DETAILS:

HARITHA TECHSERV Limited,

5B,Sriman Srinivasan Cross Strret,

Venus Colony, Alwarpet,

Chennai - 600018.

Contact Person : Sri Priya / Jagdish



Company Profile:
Harita TVS Technologies Ltd provides Engineering Design and Embedded Technology Services to customers in the Automotive Sector. The Company offers end-to-end solutions for next generation automotive products by leveraging over two decades of accumulated technical expertise in Engineering. With the experience and strong engineering background of the TVS Group, the company provides value added services to its customers in all phases of the product development cycle.

Address: Not Mentioned

Telephone: Not Mentioned

Reference ID:
HARITA/MAY/2009

Keywords: Catia V5,Catia,CatiaV5,automotive

Submit online resume here:
http://www.haritatvs.com/SubmitResum...468_4133331321

[Guest]

RESPECTED SIR/MADAM,
MY NAME IS PRAVEEN ,I HAVE BEEN LOOKING FORWARD FOR A JOB . I HAVE COMPLETED MY CATIA ADVANCED IN CADD CENTER TRICHY. SO I HERBY ATTACH MY RESUME DESCRIBING MY QUALIFICATION AND TALENTS . SO IF YOU FIND ANY JOBS THAT SUITS MY QUALIFICATION PLEASE MAY I HAVE AN OPPORTUNITY TO ATTEND.

AREA OF INTEREST:
1)ENGINEERING DESIGN.

SOFTWARES KNOWN:
A) CATIA (ADVANCED WITH SURFACE AND GENERATIVE SHEET METAL DESIGN)- COMPLETED IN JULY IN CADD CENTER.
B) AUTOCAD (2D,3D) - ALSO HAVE HAND IN EXPERIANCE ON VISUAL BASICAUTOMATION .
C)ANSYS (BASIC) - STUDIED IN COLLEGE DURING MY 7 SEMESTER

Email :- bpk_3060 AT yahoo.co.in

Contact. No.
Mobile: 9025474114

Present Address:
B.PRAVEEN KUMAR
B2/584, BHEL
TOWNSHIP
KAILASAPURAM
TRICHY-14

Permanent address:
B.PRAVEEN KUMAR
PREMNIVAS
POST ERAMALA
VIA ORKATTERY
VADAGARA TALUK
CALICUT DISTRICT
KERALA STATE
Personal Data
Date of Birth : 19TH APRIL 1986
Sex : Male
Nationality : Indian
Marital Status : Single

B.PRAVEEN KUMAR
EDUCATIONAL QUALIFICATION
May 2008 – B.Tech (full time) In Mechanical Engineering, First Class –67.7% -SASTRA University, Thanjavur, TN.

July 2005 – Diploma in Mechanical Engineering (full time), First Class -71.58% - Shanmugha polytechnic Thanjavur, TN.

TECHNICAL SKILLS
AMERICAN SOCIETY FOR NON DESTRUCTIVE TEST - LEVEL II
- Radiographic testing (RT)
- Ultrasonic testing (UT)
- Magnetic particle testing (MT)
- Liquid Penetrant testing (PT)
COMPUTER KNOWLEDGE
- AUTOCAD (2D, 3D, Auto lisp)
- Visual Basic (AutoCAD Application)
- CATIA (Advanced – Generative Surface design + Sheet
Metal Design)
- ANSYS (Basic)
- Mechanical Desktop

TRAINING PROGRAMS
- Undergone 12 months On the Job Training in BHEL
During this period ,been involved in
1) Automation of detail Engineering Drawing Generation for wind box assembly and its components (Nozzle tips , Damper assembly , Casing , Inner panel Assembly front Cover Plate , Outer Panel assembly)
2) Automation of Design Calculation of Fuel Firing system.

3) Preparation of P&ID’s for fuel oil system.
4) Preparation of detail drawing for bunker to mill system.


- Undergone 1 week training in “VEESONS ENERGY SYSTEMS PVT LIMITED”
In the areas of function/ activities, design, quality control and assurance, production, planning and material management departments.

- Undergone 2 weeks training in “TRICHY STEEL ROLLING MILLS LIMITED” in the areas of main rolling, structural rolling mill and in the lab of the company.
WORK EXPERIENCE :
ORGANIZATION : BHARAT HEAVY ELECTRICALS LTD (BHEL), TRICHY.
PERIOD : 12 MONTHS
DEPARTMENT :
- FUEL SYSTEM, PRODUCT ENGINEERING, FOSSIL BOILERS

NATURE OF WORK:
AT INVOLVED IN AUTOMATION PROJECT DEVELOPMENT USING VISUAL BASIC AUTOCAD APPLICATION.
PROJECT:

1.”PROGRAMMING OF FUEL SYSTEM USING VBA”
- DESIGN AUTOMATION IN AUTOCAD – USING VISUAL BASIC AUTOCAD APLLICATION
2.”VERTICAL SURFACE GRINDING ATTACHMENT ON LATHE”

CARRER INTEREST:
- DESIGN ENGINEERING
- QUALITY CONTROL
DECLARATION:
I Herby assure you that if I am given an opportunity to serve your organization. I will discharge my duties to the best of my ability and to the satisfaction of my seniors.


DATE: (PRAVEEN KUMAR.B)

[santoshys]

Dear madam,
I have very good knowledge above mentioned job. Please Help...
CURRICULUM VITAE
SANTOSH Y SUNKAD Email: santoshprajju AT gmail.com
C/O, Manjunath Reddy Ph- 09632671259
Residing Kammasandra (Village)
Electronics city (po)
Bangalore-560100
Karnataka

CAREER OBJECTIVES:
- To do a job and gain experience and knowledge.
- To deliver my responsibilities in a most professional manner vis-à-vis the quality and deliver time and contribute directly or indirectly to the business performance of an organization.
- To develop my overall personality through interaction with the worldwide community.
- To work for the technology and make advancements in the technologies.

ACADEMIC PROFILE:
Qualification Institute Percentage Year
S.S.L.C. Govt. High School,Aremallapur 64% 1996
I.T.I. Machinist Govt. I.T.I., Bhadravathi 69% 1996-98
NAC B.E.M.L. Bangalore. 73.28% 1999-2000
Diploma in Mechanical Engineering. S.J.M. Polytechnic Chitradurga.
I year – 66.41%
II year – 58.58%
III year- 58.18%Agg. – 61.40% 2001-04

LANGUAGES KNOWN:
- English, Kannada, Hindi, Telugu.
COMPUTER PROFICIENCY:
- Knowledge of Software : MS Excel, MS World, Power Point, DOS, CLS.
- Drafting Tool : AutoCAD 2006.
- 3D Modeling Tool : CATIA- V514,16.
- CNC PROGRAMMER& OPERATION IN GT&TC TRAINING AT BANGALORE.

SUMMARY:
- Total 6.5 Years of experience.
- Creating of 2-D drawings and accommodating the modifications in the drawing as per the customer needs using Auto CAD.
- Creating of 3-D models using the customer inputs and drafting using CATIA V5 as per the customer requirement.
- Making all types of layout at collage layout system, which is very helpful for Rotogravure machine.
- Making CNC Programming and sequence of operation on touch screen ”DUOSTAR & POLISH MASTER” these machines are manufactured by “DAETWYLER COMPANY”(SWITZERLAND).
- Proficiently making Sketcher, Part modeling, Assembly Modeling, Modifying the assembly drawings, Drafting(Generating views, Detailing views, Sectional views, generating dimension, showing symbols and tolerances),DMU Kinematic Simulation of assembly drawings, Generating videos, Sheet metal designing, Surface designing & Data saving management.
- Quality checking by using of Precision measuring Instruments.

WORK EXPERIENCE:
- After completion my ITI, I joined “ALFA ENGINEERING WORKS” as a QUALITY INSPECTOR from Agu-98 to MAY-2001. (1.7 Years).
- After completion my DME, I joined “CADBURY INDIA LTD” as a PRODUCTION TRAINEE from JAN-2005 to JULY-2005. (6 months).
- 3.8 Years worked in “THE PAPER PRODUCT LTD (HUHTAMAKI PPL)” Hyderabad as a PRODUCTION SUPERVISOR.
- Present Working in CADD CENTRE Bommasandra, Bangalore as a Design Engineer Faculty (AutoCAD and Catiav5R16). From July 2009 to till, date.

JOB PROFILE:
- Shift Handling.
- Making the Plan Sheet as per urgencies.
- Maintaining the Record Daily production.
- Sending daily production report to Head of the Dept.
- Monitoring the All Performance of M/C (Excel sheet).
- Monitoring Tool Performance of Each M/C.
- Monitoring the Store Activities only our dept.
- Monitoring the QMS documents & Graphs.
- Entering all Production Report LAN System.
- Making Preventive maintenance Record. & sending the date Engg.Dept.
- Making the Monthly MRM Presentation (Power Point).

PERSONAL DETAILS:
Name : SANTOSH Y.S.
Father’s Name : Yallappa Sunkad
Date of Birth : 1st March 1978
Permanent Address : S/o H Y Sunkad,
Choudeshwari Nagar,
4th cross Medleri Road,
Ranebennur (581115)
Haveri Dist.
Karnataka State.

Nationality : Indian
Religion : Hindu
All the information above is correct as per my knowledge is concerned. I am looking for organization that leads me supportive and co-operative environment with ample chances to contribute and diversify my knowledge and skills and offer me a good potential for future growth.

Yours faithfully,
Date: (SANTOSH.Y.S.)
Place: Bangalore

[Guest Poster]

RESPECTED SIR/MADAM,
MY NAME IS SHARIFF ,I HAVE BEEN LOOKING FOR A JOB . I HAVE COMPLETED MY CATIA ADVANCED IN CADD CENTER. SO I HERBY ATTACH MY RESUME DESCRIBING MY QUALIFICATION AND TALENTS . SO IF YOU FIND ANY JOBS THAT SUITS MY QUALIFICATION PLEASE MAY I HAVE AN OPPORTUNITY TO ATTEND.

AREA OF INTEREST:
1)ENGINEERING DESIGN.

SOFTWARES KNOWN:
A) CATIA
B) AUTOCAD (2D,3D)

Email :- shariff1003 AT gmail.com

Contact. No.
Mobile: 9959906799

Address:
ABDUL SHARIFF SHAIK
S/o SHAIK IBRAHIM
Nachuvari center
Gunipudi
Bhimavaram-534201
W.G Dist,AP

Personal Data
Date of Birth : 04-12-1988
Sex : Male
Nationality : Indian
Marital Status : Single


CAREER OBJECTIVE:
To work in an organization that will provide me an opportunity to utilize my skills in contribution to organizational goals and aim at perfection through continuous development of professional skills.
EDUCATIONAL INFORMATION:
Course Name of Board/University Year Percentage
B.E (Mechanical) S.R.K.R ENGINEERING COLLEGE, 2010 57.0% Till ANDHRA UNIVERSITY, BHIMAVARAM 4 -1 semester
Intermediate Aditya Junior College, Bhimavaram 2006 79.8%
SSC SRI KAKATIYA MERIT SCHOOL, Bhimavaram 2004 62.83%

TECHNICAL SKILLS
COMPUTER KNOWLEDGE
- AUTOCAD (2D, 3D)
- CATIA

PERSONAL TRAITS:
- Ability to lead a team as well as work in it.
- Ability to deal with changes in work environment.
- Faith in hard work
ACHIEVEMENTS AND ACTIVITIES:
- Acts as a volunteer in Robokrithi workshop conducted by Technophilia at S.R.K.R Engineering College
- Organized National level Technical Symposium SANKETHA’09.
- Organized National level Technical Symposium SAVEME’09.
- Completed the project on ‘Machine Time Reduction in Pneumatic Shaper’.

PERSONAL INFORMATION:
Name : Abdul Shariff Shaik.
Date of Birth : 04-12-1988. Age: 21. Sex: Male.
Father’s Name : Shaik Ibrahim.
Occupation : Employee
Marital Status : Single
Nationality : Indian
Languages Known : Telugu, English
Hobbies : listening music, Watching Movies, playing cricket.

DECLARATION:
I declare that the above information is true to the best of my knowledge and belief.

S.A.Shariff

[Guest Poster]

Rajeev Ranjan.
B.E. (Electronics & Telecommunication)
LOCAL ADD
Row House A-6, phase-3,
Golden nest ,Mira-Bhayandar Rd
Mira road (E) thane - 401105
Mail- ranjan.er2007 AT gmail.com , Mob - 09594620096 ,9867457074
Career Objective
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.


Career history
DURATION COMPANY AREA DESIGNATION
AUG 06 to, OCT 07 RT Outsourcing Gwalior N.S.N PROJECT M.P. Trainee & SITE ENGINEER
Dec O7 TO MAY08 . DIG VIJAY COMMUNICATION N.S.N Projects (GUJRAT) Site Engineer
Jun 08 To Dec 08 GTL MUMBAI Bharti Mumbai BSS (Kuala, Ghatkoper)

Dec 08 TO Till date COALTECH ENGINEER’S Airtel & Aircel Mumbai &

Gujarat NEC Project Co-0rdinater(NSN Pro)

Job profile
- Co-ordinater NSN Project (Mumbai) :
NSN PROJECT IN MUMBAI, Customer Relation, Vendor Relation, Manpower Recruitments for MUMBAI COALTECH, SDR/MRF/CAM , ,DAILY Target Setup, AT Planning & Output ,Documentations and final WCC SIGN.

- Co-ordinater NEC PROJECT(Gujarat)(2 months 48 sites)
NEC PRO in AHMADABAD. Planning & customer relations, men power recruitment, Quality visits, Documentations.

- Worked as coordinater for ALCATEL-LUCENT project Gujarat COALTECH ENGINEERS 16 sites in Gandhi Dham, Bhuj, surendar ,Ahmadabad.
- Experience to work on ZTE sites installation commission .

Team Strength- 18 t0 28 employees (engineers, technicians, vendors).

Extra Activity in Coaltech –Manpower searching from different originations for our outsourcing and project team.

Experience-

1. Able to manage O & M of BTS, Hardware and Software Up gradation, 3G NOKIA site survey, installation, BTS training in PUNE.
2. Supervised and coordinated for Commission & Integrations of NOKIA BTS for AIRTEL, AIRCEL Cell Sites (NSN PROJECT).
3. M/W, NEC link ,SDH,PDH equipments installation and commission.
4. LOS issue, corrective maintenance of BTS/MW Network
5. RRI,FIFA ,FIU,E1/T1 commission for radio link.
6. Fault rectification & Troubleshooting of BTS & MW link. 100% link obtains.
7. Power plant installation commission.
8. Multiplexer (MUX) Commissioning and Cross Connection of numerous cell sites
9. Alarm creation, Quality visits.
10. Punch point clearing.
11. VSWR analyzing.
12. VSWR trouble shoots.
13. Make cross connection for (E-1) Media.
14. E1 thru, E1 break. Call testing,
15. Half E1 by pass. Full E1 by pass.
16. TRX Loop testing & Alarm Termination.


17. Path loss, RSSI.
18. N.D report.
19. Sector swaps check.
20. ULTRA /FLEXY BTS swapping.
21. TRX addition.
22. Air combining. Fault rectification & Troubleshooting of BTS & MW link.
23. Sector addition, Segmentation of BTS,
24. MRF making.
25. CAM,SRN,TSSR study
26. Link Budget study.
27. AT sheet making signing.
28. P.O, WCC.
29. Documentations & all work as coordinator.
30. ZTE sites installation commission.
31. ALCATEL-LUCENT

Designation Expects:- Depends on company profile that may be site engineer, Quality Engineer, Coordinaer ,Field Manager etc…

Current salary: - 21000/-(+TA,MOB )

Salary Expected : - 30% hike
Intimation time to switch the job: - 10 to 15 days
Educational Background
- B.E. (2006) in Electronics and Communication from M.P.C.T Gwalior
- Higher Secondary (1999) from D.C College Hajipur Vaisali Bihar (71%)
- High School (1997) from C.B.S.E. ( 50%)
Industrial Training
Industrial training at Bharat Sanchar Nigam Limited, Gwalior(M. P.) for a period of 25 days.
Permanent Contact Information
Father's Name : Shri Santosh kumar
Date of Birth : Dec30, 1982
Address At +Po : Barsam ,Via - Mangwar, Dis- Saharsa , Bihar
Nationality : INDIAN
Language Known : Hindi & English.

I vouch the authenticity of above-mentioned information.
Date:
Place: . Rajeev Ranjan

[Guest]

AMBADAS P Hibare
* :ambadas.hibare AT gmail.com
* :hibare.ambu AT yahoo.com

Career Objective
Seeking a position to utilize my skill and abilities in the Design industry that offers profession growth while being Resourceful, Innovative and flexible.
*
Experience in Summary
· Having Total Experience on diploma 3+ in CADD field as Design Engineer & Draftsman
· Relevant Experience in CATIA V5 2+ years on Automotive.
· Gained good experience in 3D-modeling, Surface modeling, Assembling and Drafting.
· Completed 1- year Apprenticeship Training in KSRTC Depot-3 Gulbarga on I.T.I.
· After completion of I.T.I. worked in Korishetty Maruti Servicing Point Gulbarga, for 2 years as Trainee.
· Positive attitude with readiness to learn continuously and self-motivated.
· Possess good communication and interpersonal skills with ability to work under pressures and meet deadlines.
Education Details
Pursuing AMIE from THE INSTITUTION OF ENGINEERS (INDIA) KOLKATA University. Membership No. ST555372-0 www.ieindia.org
Diploma in Mechanical Engineering from N.E.S Polytechnic, Gulbarga Karnataka in 2007
I.T.I in M.M.V from Govt. I.T.I (Men), Gulbarga, Karnataka in 2001
Technical Skills
Operating System : Microsoft Windows
Basics : MS Office, MS Excel
Software’s : CATIA-V5 (CCCP), Auto CAD 2007
Software Packages :
Certified Professional program in CAD/CAM/CAE/PLM (CCCP) By EDS Technologies Bangalore Training Duration : (120Hrs) 18 Apr 2011 to 06 May 2011
Dassault System-Certified PLM Education Partner. www.edstechnologies.com
A) CAD Packages
CATIA V5 R20 (CCCP)
Mechanical Design (MD2)
Sketcher (PDG)
Part (PDG)
Assembly Design (ASD/ASSM)
Draft

Shape Design (HD2)
Generative Shape Design (GSI)
Free Style (FSS)
Analysis & Simulation
Generative part
Structural Analysis (GPS)
Digital Mock Up (DMU)
Kinematic (KIN)
Navigator (NAV)
Space Analysis (SPA)
Fitting (FTT)
Machining
Lathe (2 Axis)
Prismatic (3/5 Axis)
B) PDM/PLM Package
Enovia V5 Smarteam R20
Editor
Life Cycle management
Work Flow
Administrator
Integration
Professional Experience :
Presently working as Design Engineer for NAGEL SPECIAL MACHINES PVT. LTD. Bangalore. Through SAMVITH TECHNOLOGIES, Bangalore from Nov 2010 to Till Date. www.samvithtech.com
Worked as Design Engineer CATIA V5 (AutoCAD Draftsman) SOFTTECH SOLUTIONS, Bangalore from June 2008 to Oct 2010.
NAGEL SPECIAL MACHINES PVT.LTD. Bangalore.
Role : I was involved in designing, modeling and detailing of the Structural parts of
Honing Machine.
Description : The NAGEL Special Machine is the manufacturers of special finishing
machines such as Honing machine mainly for the different automotive parts
like Engines, Crank etc. where high accuracy should be maintained for piston
bores etc., I was involved in the Design and Detailing of different structural
parts machine base, column, axial clamps etc.
Project Details :
Project
Title : PDC (Pressure Die Casting) Components
Client name : CHAMUNDI DIE CAST Bangalore.
CAD Software : CATIA V5, Auto CAD 2007
Role : I was involved in modeling, detailing and making moulds of the
Automobile Components.
Description : This Project includes designing, 2-D detailing of the single and four
cavitymoulds for the component of Aluminum alloy material of the
Automobile Components (BAJAJ).Including Casting Processes My role
in this project was I was in the designing and modeling along with
detailing of the sub-assembling parts such as top plate, bottom plate etc.
Using CATIA V5 R17 and AUTO CADD 2007 software.
Project
Title : TOOLING (FRP &Vacuums Forming) Plastic Components
Client name : REVA Electric Car Co. (Pvt) Ltd. Bangalore.
CAD Software : CATIA V5 R17
Role : I was involved in making tooling for CNC Machining route.
Description : This Project includes making of Tooling for CNC Machining route of
Automobile component (REVA ELETRIC CAR).My role involves
taking nonparametric model, extracting inner surfaces of the model,
make a skin surface and convert into a 3D solid tooling using
CATIA V5 R17 software.
Project
Title : Brackets (2D to 3D Conversion and Drafting)
Client name : Rajlaxmi Stumpings Ltd.
CAD Software : CATIA V5 & Auto CAD 2007
Role : I was involved in Conversion of 2D to 3D parametric solid body. And
along with detailing, Appling GD&T for the drawings
Description : This Project includes Conversion of 2D drawing to parametric 3D solid
model. The input for the project was 2D hard copy and 2D soft copy of
AutoCAD format data. Using CATIA V5 R17 and AUTOCADD 2007
software.
Project
Title : 2D drafting
Client name : Hinduja Foundries Ltd. Sriperumbudur Chennai.
CAD Software : Auto CAD 2007
Role : I was involved in detailing of the Fixtures.
Description : This project includes 2D detailing of the Snag Grinding Fixture,
TATA-FIAT 4Cylinder Block etc.

[Guest]

RESUME
ANANDHKUMAR.P
Email - anandhkumar88 AT gmail.com
Area of Interest
Projects
In Plant Training
Co-Curricular Activities
Languages known

Objective
- To get a suitable job to enrich my knowledge, skills and
Ability in a challenging and creative environment.
Academic details :
Institution Board Of % Of Marks
University & Qualification
Paavai Anna University (Coimbatore) 76.6
College of Engineering, BE[Electronics and communication
Namakkal. Engineering][2008-2011]
ThiagarajarPolytechnic Directorate of Technical 87.5
College. Salem. Education. Chennai[DEEE]
[2008]
Govt.Boys.Hr.School State Board 82.7 Salem-636003 H.S.S [2006]
Govt.Boys.Hr.School State Board 60.2
Salem-636003 S.S.L.C [2004]

Computer Proficiency :

Languages : C,(Basics).
Package : MS Office,MULTISIM,MODELSIM
Hardware : Computer Hardware Maintenance And Servicing.

- Digital Electronics.
- Microprocessor.
- Presented Final year Project titled on “EYE BLINK AND ALCOHOL SENSOR BASED VECHICAL ACCIDENT PREVENTING SYSTEM”.
- Presented the final year project in Diploma titled “NETWORK ENABLED INDUSTRIAL AUTOMATION”.
- Undergone in plant training at BHARAT SANCHAR NIGAM LIMITED, Salem.
- Undergone in plant training at ELECTRICAL LOCO SHEET, Erode.
- Undergone in plant training at BURN COMPANY LTD, Salem.
- Participated Technical Quiz in Paavai College of Engineering.
- Runner in kho-kho Inter college level.

[Guest]

Respected sir
I have seen your company profile on a job site,with reference to your requirement for design engineer in your company, I have posted my resume with this mail, i am awaiting for your response.
thanks
N.Harikrishnan

[Guest]

Curriculum vitae
P.KARTHICK
Email : karthi_guts22 AT yahoo.com

To seek a challenging position , in dynamic environment and desires to progress further in the field and likes to grow with the organization and prove to be an asset for effective functioning ,also to be team player for the achievement of organizational goals and its success.
EDUCATIONAL QUALIFICATIONS :
· B.E in Automobile Engineering from Anna University of Technology, Coimbatore in June 2011, CGPA -8.12 (81.2%)
· Diploma in Mechanical Engineering from Murugappa Polytechnic College, Avadi, Chennai in April 2007 with 83.2%.
· 10th State Board from R.C.M. Hr. Sec High School, Avadi, Chennai, Tamil Nadu Education Board, India in 2004 with 91%.

TOTAL YEAR OF WORK EXPERIENCE :

CAREER PROFILE
·1 RANE ENGINE VALVE LIMITED, Aug 2007 – June 2008( 11 months)
Alandur, Chennai.
Designation : CELL LEADER
Job Responsibilities :
·2 Responsible for process planning for achieving the production as per the target.
·3 Monitoring the line problems and analyzing the root causes and implementing the corrective action towards zero defects.
·4 Responsible for managing 5S in the shop floor.
·5 Responsible for arranging tools and all consumable items.
·6 Encourage the employee involvement in improvement activities.
·7 Focus on continuous improvement activities like cost reduction improvement of productivity and implementing kaizens.
·8 Planning and handling of manpower required for the production.

PROJECTS ACHIEVEMENTS :
ü1 Diploma project :
Fabrication of Semi-Automatic cutting machine.
ü2 Engineering project :
Cost reduction through Value engineering techniques in FES at Ashok Leyland limited, Ennore plant, Chennai.
ü3 Implant training in BorgWarner Morse Tec pvt ltd and Ambal autos service centre .
KEY SKILLS :
Well Conversant with AUTO CAD 2010, pro-e wildfire 5.0, solid works, Windows 98, MS word, MS Excel, E-Mail, Internet.

[Guest]

PRAMODKUMAR JAMMALADINNI
Email :jammaladinni AT gmail.com

Career Objective :
To facilitate that I accomplish nascent skills, expertise, adeptness and imbibe proficiency in my trade subject through which I can mitigate the problems in my career and emerge as an outstanding professional in my sphere of work and earn laurels to the firm with which I am associated.
To invigorate my skills, abreast of latent technologies with commitment and dedication which will help me to explore and enrich my potentials which not only bring professional satisfaction but also to contribute to the upliftment of the society around me.
Educational Qualification :
COURSE TOTAL MARKS MARKS OBTAINED PERCENTAGE CLASS
SSLC 625 540 86.40% First class with distinction
PUC 600 322 54.00% Second class
B.E. in MECHANICAL ENGINEERING
SEM TOTAL MARKS MARKS OBTAINED PERCENTAGE CLASS
1st 700 400 58.00% SC
2nd 600 309 52.00% SC
3rd 700 372 54.00% SC
4th 700 316 46.00% SC
5th 700 408 59.00% SC
6th 750 408 55.00% SC
7th 750 475 64.00% FC
8th 650 450 69.00% FC

Aggregate : 57.12%
Project Undertaken :
“Investigation on drilling of polymer matrix composite materials”
My strengths :
- Problem solving ability
- Good Interpersonal skills
- Good verbal and written communication skills
- A good team facilitator
- A very sincere, hard working, committed and dedicated worker
- Works with team spirit and a go-getter.
Tools :
- CATIA V5 R20
IT Proficiency :
- Ms-office
- C :Basics
Hobbies :
- Playing Kho Kho,Badminton,Volley Ball.
- Cooking
- Swimming.
- Chating

[Guest]

PLEASE REPLY ME ABOUT JOBS. MY EMAIL ID IS kulkarnivpr AT gmail.com.

[Guest]

M.SENTHIL KUMAR

(BE – MECHANICAL ENGINEER)
- senthil_knwlge AT yahoo.com
Career Objective

Looking for an excellent challenging opportunity to work as a mechanical engineer with my creative talent and innovative capability that will help to give better service to your company.

Academic Qualification
GRADUATION :

2007– 2011 Bachelor of Engineering – Mechanical
Alagappa Chettiar College of Engg. & Tech,
Karaikudi-4.

Total Percentage Secured : 75%

Final year marks : 75.86%

SSLC :
2004-2005 S.S.Hn.Hr.Sec School, Muhavur, viurudhunagar dist

Percentage Secured : 75 %
HSC :
2006-2007 S.S.Hn.Hr.Sec School, Muhavur,viurudhunagar dist
Percentage Secured : 89.78 %
Experience :
- Seven month of experience as Production engineer in Diamond engineering pvt ltd, Chennai.
Nature of work :
- Analyzing the CAD drawing in-depth. From that, preparing the material by shearing, cnc, machining requisition by pre-planning.
- Then finding the required machines and workers through monitoring the capability of machines and correct workers.
- Forming Team work, finish the job successfully as per 100% customer satisfaction with 0% rework.
Achievements :
- Secured School first in HSC.
- Ist Prize in paper presentation in ISTE.
- 3rd Prize in paper presentation in SAE.
- First Class in Computer Aptitude Test exam and got ISO9000 standard certificate.
Project :
- Generating power from speed breaker by using rack and pinion arrangement.
Skill Set :
- Catia v5 designing software
- Basics of Auto-cad 2007, Pro-e v3 and Ansys.
- Basics of C Language
- Ms-Office
Area of Interest :
- Strength of Materials.
- Manufacturing technology.
Industrial Visiting :
- “Shanthi Gears” Coimbatore.
- “ASHOK LEYLAND” ennore.
In-Plant Training :
- “Thermal Power Station” for 5days, mettur.
- “TNSTC Re-Conditioning unit” for 15days, devakottai.
Extracurricular profile :
- Active member of NSS.
- Active member of SAE.
- Active member of ROTARACT.
- Active member of Mechanical Association.
- Active member of ISTE.
Participation :
participated paper presentation competition in
- Karpagam College Of Engineering, Coimbatore.
- Francis Xavier College of Engineering, tirunelveli.
- Noorul Islam College of Engineering, nagarcoil.
Declaration :
I hereby declare that all the above furnished details are true to the best of my knowledge.
Yours truly,
Place :
Date : (M.SENTHIL KUMAR BE.,)

[Guest]

sir,
i completed pd-pmt 2011 batch at cipet and technical skill pro/e, catia with fresher.

[Guest]

I am searching jobs in designing.