The Indure Pvt Ltd Kolkata : Ash Handling Plant Design

[Admin]

The Indure Private Limited Kolkata : Design Engineers - For Ash - Handling Plant
Website: http://www.desein.com www.deseinindure.com

Keywords: mechanical, ash handling, design, engineering, power

Designation: Design Engineers - For Ash - Handling Plant
Experience: 5 - 10 Years
Location: Kolkata
Compensation:
Compensation package will be attractive and commensurate with qualification & experience
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 03 May 2009

Job Description:
The incumbent’s main job responsibilities will include the following:
·Generating design document, pump sizing, pipe sizing, pressure drop of various systems, P&ID’s, technical data sheets etc. Development of GA & layout drawings of plant & equipment.
·Development of Piping layouts & Isometric drawings.
·Preparation of Pipe & valve schedules.
·Preparation of detailed bill of Materials for procurement

Desired Candidate Profile:
Candidates must be BE or ME in Mechanical stream from a reputed College/ University having sound knowledge in Ash -Handling field having minimum 5 - 25 years of experience in design & exposure to interfacing with other disciplines like Civil, Electrical, & C & I.

Company Profile:
THE INDURE PRIVATE LIMITED is an ISO 9001:2000 certified company. It is also one of the few companies which undertake EPC contracts for complete power plants as well as Balance of Plant Packages in Power Sector for up to 500 MW. During the last four decades, it has successfully executed a large number of such contracts involving engineering, supply, erection, construction and commissioning. INDURE has been associated with installation of Ash Handling plants catering to a total generating capacity of more than 60,000 MW. Today, INDURE’S order book exceeds Rs.2500 Crores and is anticipating further orders worth Rs.4000 crores in near future.

Address:
Desein Private Limited
Desein House
Greater Kailash II
New Delhi,Delhi,INDIA 110048

Email Address: jobs@deseinindure.com

Keywords: mechanical, ash handling, design, engineering, power

[Guest-IJT]

Sir,
I am jamshar, Diploam and ITI holder with AtoCAD knowledge. So I offer my service for post mentioned above.
For regarding my qualifications and experiences, my biodata is given below.

CURRICULAM VITAE
JAMSHAR THODUVIL
jamsharsaid AT gmail.com
Ph : + 91

Career Objective
To pursue a rewarding career in global organization to enrich technical skill and competitive edge of the organization. I can work with any team and help in contributing to the growth of the organization and eventually be an asset to the organization.

Education
Diploma in Electrical Engineering :
- Board Board of technical education, Kerala state.
- College GPTC Perinthalmanna.
- Year of passing 2004
- % of Mark 76.75

NTC in Draughtsman Civil :
- Board NCVT
- College SOITC Areacode
- Year of passing 2000
- % of Mark 73.60

Higher Secondary (Pre-Degree) in Science :
- University Calicut University
- College NSS College Manjeri
- Year of passing 1997
- % of Mark 50.40

Secondary School Leaving Certificate :
- Board Kerala State Education Department
- School SSHS Moorkanad
- Year of passing 1995
- % of Mark 75.07

Computer Knowledge
- Auto CAD – Level 1 & 2
- 3ds max
- Photoshop
- MS Word and MS Excel

Experience
- 2 years experience as Draughtsman (Civil &MEP) in ADC Energy Systems, Dubai, UAE – (Feb 2009- Jan 2011)
- 6 years experience as Draughtsman in various firms in India.

[Guest]

Sir, I am Anuj Kumar ,a fresher mechanical engineering graduate and i want to work for the company.

[Guest]

sir, i am presently working in indure pvt. ltd. at mundra. but i want to permanent in company.

[Guest]

RESUME
RAJU VERMA
E-mail :rajuieccet AT gmail.com
Career Objective :
To work in a professionally managed organization enabling my skills in both professional and personal field and offering a significant learning and performance based career in the modern and fast growing techno commercial organization. I wish to evolve as an effective personality through progressive, sincere and sustainable.
Technical Qualification :
- B. Tech in Electrical Engineering from IEC College of Engg.& Tech. Gr. Noida,G.B.NAGAR (U.P.)
- Diploma in Electrical Engineering from Govt. Polytechnic, Ghazipur(U.P.) in 2008.
Academic Qualification Background :
- High School (10th) from UP Board, in 2003.
- Intermediate (12th) from UP Board, in 2005.
Additional :
- One Year Diploma in Computer Application.
Industrial Training :
- 4 weeks Summer Training from 132kv substation Andhau,Ghazipur(U.P.) in 2007 & 4 weeks Summer Training from DTL DELHI.
Academic Project
- Traffic Light Controller with Adaptive Logic
Key Strengths :
- Able to establish effective priorities.
- Strong problem solving abilities.
- Ability to interact with people on all levels, using acute listening skills, diplomacy.
EXPERIENCE :
At this time working in CONTAINER CO-OPERATION OF INDIA LTD. TUGALKABAD as maintenance engineer from 25/09/2011 to till now.

[Guest]

Position Applied for : Safety officer
Himansu Kumar Samal

Mail to : - him_cnet AT rediffmail.com
him2cnet AT gmail.com
OBJECTIVE
To achieve excellence in work through skills, experience, determination & devotion & be a resource - contributing centre by adding value to organizational growth.

- 10th passed with 46% of mark from ORISSA BOAED. 2003.
- COMPUTER HARDWARE & NETWORKING FROM (C-NET)-Rourkela
- Advanced course in industrial Safety Management (IIMS)-Rourkela
- Diploma in Industrial fire & Safety (IIMS) From-Rourkela
Operating Systems : Windows 2000 & XP.
Application Software : Ms- Office, Hardware & Networking
- Driplex was established in 1974. Driplex is fully equipped with technology, know-how,
resources & experience to undertake turnkey execution of complete Ash Handling
systems for coal-fired thermal power stations & industrial boilers. Technically tie up
with M/s Zhenjiang Pneuplan Pneumatic Conveyance Ltd, China.
- International and national codes and regulations.
- Customer and industry standards.
- ISO 9001 :2000 Quality Management System.
PROJECTS OF REPUTED CUSTOMER’S HANDLED
a. Ash Handling Package of 2nd phase expansion of 18.5 MW & 250 TPH Steam cum
Co-generation Power Plant (SPP) in NALCO, Damanjodi, Orissa.
1. Handling the all electrical activity
2. Work in 415 Volts

1. Application to Work Permit
2. Excavation Permit
3. Height Work Permit
4. Radiography Work
5. Controlled Blasting Permit.
6. Confined Space Entry Permit.
7. Requisition to Work Permit
8. Night Work Permit

1. When Worker starts the job before give to the Safety tool box/Peptalk Training :-
.
Hazards involved :
1. Fall from high
2. Materials fall from the height
3. Electrical shock
4. Short Circuit
5. Fire
Precaution to be taken : Safety belt must be tie up in a safe position. Use fall arrester and
Lifeline. Use proper PPEs. Earthing and its continuity through
MCB and ELCB. Use of flesh back arrester in all cutting sets.
2. Daily cheek the PPE’S (Personnel Protective Equipment)
1. First time entry the new worker start the job before I can provide the Induction Training
A. Introduction H.Emergency Procedure
B. General Safety Rules & Regulations I. Responsibility for Safety
C. Safety Organization J. Personnel Protective Equipment
D. Work Permit System k. Electrical Work
E. Hot Work L. fire Fighting
F. Work at height N. Hygiene & Housekeeping
G. Material Handling & Rigging
This Topic Discus to the Worker and Worker Name, Gate pass No, Designation Sub contractor Name and signature maintain the register.
1. Adult Register
2. PPE Issue Register
3. First Aid
4. Daily Observation
5. Daily Action
6. Tool Box Training
7. Induction Training
8. Awareness Training
9. Load Test Status
10. Earth Movers
11. Electrical Records
12. Contractor Status
13. Gas Cylinder Status
14. Weekly Report
15. Accident Register
16. Monthly Report

- Organizing and Ensuring Tool Box/ Safety Talk meeting before starting daily job for
briefing about hazards and its safety precaution.
- Coordination the safety activities between the sub-contractor and client etc.
- Review and approve the sub contractors’ safe working procedure.
- Daily inspection of work sites for locating hazards & issuing report.
- Be familiar with state and statutory legislation Bihar Safety rule and guideline.
- Making reports and investigations of all near misses incidents or accidents.
Organizing the periodic safety committee meeting, preparation of agenda.
- Periodic Inspection of Approved PPE’s.
To educate worker for proper use of different types of PPE’s.
- Ensuring the safety equipments, (including firefighting equipment) is always ready
for use, monitor expiry dates inspection requirements.
-Directs the work of personnel in his charge and maintains list of safety equipments.
-Prepares comprehensive HSE report to include accident, incident, near miss and
investigations reports and waste generation.
-Conduct training to the contractor’s staff.
-Generate a safety management system, ensures personnel’s adherence to safe
working and maintains good housekeeping.
-Check on periodic basic all equipment’s and tools specified in the contract and ensure
they are in safe working condition.

[Guest]

RESUME
Vivek Kumar Singh
Email : -viveksingh.singh99 AT gmail.com
OBJECTIVE :
- To obtain Full Time position for Instrumentation & Control systems where outstanding skills, relevant work experience and education can be utilized.
- Strong People Management skills coupled with professional competencies in judiciously managing resources with structured inputs across domains of project planning, budgeting, scheduling & monitoring.
- I am looking forward to be associated with leading organization like you to fulfill my desire of accruing knowledge and skill which is useful in the growth of organization.
EDUCATIONAL QUALIFICATIONS :
Examination Division Board/College/University
MBA (PROJECT MANAGEMENT) PERSUING SIKKIM MANIPAL UNIVERSITY
B.TECH (2007- 2010) , 60.4% First U.P.T.U.,LUCKNOW
Diploma in Electronics Engineering ( 2004-2007) , 72.3% First B.T.E.UP,LUCKNOW
INTERMEDIATE (2003) Second U.P. Board
HIGH SCHOOL (2001) Second U.P. Board

PROFESSIONAL EXPERIENCE : 01st July, 2010 to Till date
- I am Working as a Control desk Engineer in Ash Handling Control room (Handling Dry & wet mode) under CREATIVE ASHTECH POWER PROJECTS PVT.LTD from 01st July 2010 to till date in 4X300MW Power supply, Rosa Thermal power plant Shahjahanpur U.P.(Reliance Power)
- I am also working as a Control and Instrumentation (C&I) Engineering in Ash Handling plant in O&M department, I have good knowledge in instrumentation field like Pressure Gauge, Pressure Switch, Temperature Gauge, Temperature Indicator and Controller, Level transmiter, Pressure Transmiter, Level switch, Temperature Switch, calibrating & installing Pneumatic Control Valve etc.
SKILLS :
- Having knowledge of Allen Bradley PLC (RSLogix5000PLC)
- SCADA(Wonder ware : In Touch)
- Installation and commissioning of instruments.
- Knowledge of control loops and application
EXPERIENCE ASH HANDLING PLANT :-
1. Working in a Vacuum phase system in Wet mode & Dry mode (ash handling package) in Rosa Power Supply Company Limited.
2. Experience of trial and testing, and commissioning of rotary equipment i.e. Pumps, Compressor, Blower, Silo and respective Operation & Maintenance etc.
3. Bearing the responsibility of Testing, Commissioning and Operating ash handling plant processes such as Esp. hoppers Evacuations, Buffer hopper Evacuation, Bottom de-ashing, Eco hoppers de-ashing, Collector tower and Dry ash mode evacuation are including operations of silo area.
4. Managing the functions of troubleshooting and preventive (quarterly) breakdown of various machines.
5. I am quite confident in instrumentation field especially all type of valves, MHVs, calibrating of gauge, switch, and transmitter.
SUMMER TRAINING :
- Organization : Institute of Technology Banaras Hindu University (03/06/2009 to 05/07/2009).
- Duration : 5 Weeks Training: Conducted a 5 weeks study on intelligent techniques for cluster analysis and its implementation on MATLAB.
- Organization : Diesel Locomotive Works Varanasi (03/07/2006 to 29/07/2006).
- Training : Conducted a 4 weeks research on Tool Room, Telephone Exchange & Electrical lab.
ACADEMIC PROJECT DETAIL :
Rf Control Wireless Alert for Motor Pump
MICRO PROCESSOR BASED ON-OFF LEVEL AND TEMPERATOR CONTROLLER.
My interest in project execution was immense and I had worked hard to materialize the same, in to reality. The project was successfully completed and tested. I stimulated different conditions and found the Controller working as excellent. These involved a level sensor for giving single to the processor.
COMPUTER PROFICIENCY :
- Operating Systems Known : Windows 98, Windows 2000, Windows XP Professional, and Windows Vista.
- Software Packages Known : C,C++ Language, CAD LAB, MATLAB, Microsoft Office,
Internet applications and more.

ACHIEVEMENTS :
- NCC B certificate & camp certificate holder.
- Involved in the pulse polio mission and social awareness campaign.
- Involved in organizing of the annual game event in college festival.

[Guest]

Currently working in L&T (AS A RS(REGULAR SUPPLY) EMPLOYEE) from last 2.5 tears as a SITE EXECUTION ENGINEER (MECHANICAL) AT ROURKELA. Here i am engaged in ASSEMBLY & ERECTION of various building structures which includes MIXING BUILDING, CRUSHER BUILDING, SCREENING BUILDING, JUNCTION HOUSE, CONVEYOR GALLERY & CONVEYOR EQUIPMENTS for the construction of India's largest SINTER PLANT FOR SAIL, REOURKELA STEEL PLANT AT ROURKELA, ORISSA, INDIA.

CURRENT SALARY- 12000/MONTH
EXPECTED SALARY- NEGOTIABLE
APPLIED FOR THE POST OF ASSISTANT ENGINEER
CONTACT NO -

AVAILABLE IMMEDIATELY

[Guest]

B.tech in mechanical engineering and ASNT LEVEL-2 with 2 years experience in QA/QC field in Tata power limited (UMPP)
RESUME

Name : K.Dilleswararao
Email : dilleswara AT gmail.com


CAREER OBJECTIVE :
A well established engineering position in a global organization and offers my skills and ability to archives the best.
Academic Qualifications :
B.Tech.
(Mechanical
engineering)
AITAM, Tekkali
JNTU, Kakinada
2005-09
INTERMEDIATE Vikas jr college, srikakulam Board of intermediate Education, AP
2002-04
S.S.C Kiranmayi school, pathapatnam. Board of Secondary Education, AP
2001-02
Certification :
- American Society of Non Destructive testing (ASNT) Level 2 in Radiography testing (RT), Ultrasonic Testing (UT) , Magnetic Particle Testing(MPT),Penetrate Testing(PT), Visual Test(VT)
Software proficiency :
- Auto cad
PRESENT WORKING :
Working as an Engineer (QA/QC) Grade in POWER MECH PROJECTS L. T.D with DOOSAN PROJECTS INDIA L.T.D at MUNDRA from Nov-2010 to still now.
Client : COASTAL GUJARAT POWER L.T.D
EPC contra : DOOSAN PROJECT INDIA L.T.D
Project : ULTRA MEGA POWER PROJECTS (5X800MW)
Location : Mundra, Gujarat
Designation : Engineer (QA/QC)
Consultant : DOOSAN INDIA PROJECT L.T.D
Manufacturer : DOOSAN HEAVY INDUSTRIES & CONSTRUCTION
LIMITED (KOREA, 5X800MW, CGPL, Mundra)
Company : COASTAL GUJARAT POWER LIMITED
Job responsibilities in Q.A/Q.C Department :-
- Offering N.D.T & check the radiography film.
- Prepare the Erection welding Schedule, Inspection & Test plan & Quality assurance plan.
- Arrange the P.W.H.T test & Hardness test as per requirement.
- Check the Material Spectral analysis.
- Inspection of materials and welding consumables as per specification.
- Conducting visual inspection on welds and parent material.
- Preparation and attending of punch list for erection.
- Alignment & level checking.
- Structural steel fabrication inspection
- Fit up checking ,material verification & dimensional analysis
- Managing all documentation and data control.
- Checking of preheat & post heat.
- Establishing and maintaining the quality plan as per ITP.
- Inspection and clearance of FIT-UP, material verification & weld visual inspection
- Establishing and maintaining the quality plan reports
- Complete all document for the Audit as per our client requirement
- Carried out Weld Visual Inspection of Welding.
- ESP activities like Hoppers, electrodes alignment, weld visual, kerosene test.
Previous Working Experience :
Organization : M/s. GOPAL ENGINEERING WORKS
Designation : QC Engineer
Duration : JULY 2009 to September 2010
Sector : HPCL CDU-II Shut down, HPCL, VSP.
Location : Visakhapatnam, Clint : M/s. HPCL-Visakh Refinery
Job responsibilities
- Presently I have worked in CDU-II Shut down (Crude Distillation Unit) at HPCL Visakh Refinery as an execution engineer and as a QC inspector.
- Collect the required materials for the specific jobs.
- Taking fit up clearance for pipe line job.
- DP test for all the welded joints on all the columns.
- Hydro test of nozzles & exchangers.
- Leak (soap solution) test of RF pads etc.
- CS pipe line work for wash water line at refinery.
- Box up the Deck man ways of the column.
- Inspecting of pipeline welded joints and also draw the pipeline
Drawing and study of pipe line drawing.
- Participated in CDU-I (Crude Distillation Unit) maintenance work at HPCL refinery as Execution engineer and as a QC inspector.
- Preparation of QA Plan and Non Destructive Examination
Programs.
- DP test of all the welded joints on all the columns.
- Hydro test of all nozzles & exchangers.
- Leak (soap solution) test of RF pads.
- Monitoring the job and site.
- Inspecting of stage wise welded joints, i.e. before welding, During
welding & After welding
- Inspecting of Incoming Raw Material. That is Visual inspection and
Dimensional inspection.
- Inspecting of different stages of Fabrication. That is Visual inspection and Dimensional inspection.
- Preparation of Final Inspection Report.
- Inspecting of beams and columns like Spacing, verticality and
water level and Inspecting of welded joints of Beams and Columns.
Project Work :
- Title : HYDRAULIC WATER BELL
Team size : Lead through 6 members.
Description : Experimental and theoretical investigation on
Hydraulic water bell. In this Project we have studied
about different types of bells, which are used to cool
the electronic instruments by indirect contact of
water, happens when a jet Strikes the impactor.
- Title : “SHIP CONSTRUCTION”(Mini project)
Location : “HINDUSTAN SHIPYARD LTD”, VISHAKAPATNAM.
Description : The processes involved in “SHIP CONSTRUCTIONAL
WORK” in Hull berth department.
Strength:
- Hard working, quick learning, positive attitude.
Declaration:
I K.DILLESWARARAO hereby declare that the information furnished above is true to the best of my knowledge.

Place:-
Date :- Signature
(K.Dilleswararao)

[Guest]

Sir,
I am a diploma engineer having 9 years experience. presently working with McNally bharay engg. co. ltd. in the field of ash handling proposal engineering and merketing. if any suitable opening is there in your company͵ i will be ready to serve for the same
Regards
somnath bhattacharjee

[Guest]

ADDRESS OF KOLKATA OFFICE