Piping Design Engineer Spain : www.crystalconsultants.in Crytal Consultants

[Admin]

Crystal Consultants Spain : Principal Piping Engineer
Website: www.crystalconsultants.in

Keywords: principal piping engineer

Designation: Principal Piping Engineer
Experience: 17 - 20 Years
Location: Spain
Education:
UG - Any Graduate
PG - Post Graduation Not Required
Industry Type: Recruitment/ Employment Firm
Functional Area: Other
Posted Date: 27 Apr 2009

Job Description:
Studying the scope of the project, comparing it with the offer, for any deviations, and if so to take the necessary measures, controlling the hours granted to the department, for each of the disciplines.Control the agenda through regular monitoring.

Desired Candidate Profile:
16-20 years predominantly in piping Section and should have working experience in OIL & GAS industry. Maintain smooth communications with customers and leaders from other disciplines and ensure the flow and quality of technical information.

Company Profile:
Crystal Consultants

Address: Not Mentioned

Email Address: resumes@crystalconsultants.in

Telephone: Not Mentioned

Reference ID:
A/pp

Keywords: principal piping engineer


CRYSTAL CONSULTANTS

Flat No. 117, Left Wing,
Amrutha Villa opp. Yashoda Hospital,
Raj Bhavan Road,
Samajiguda,
Hyderabad-82.
Tel: 040 23412096 / 97
040 23422181

[Guest]

I am looking for the job of Piping Layout Engineer.

[Guest]

PIPING DESIGN ENGINEER

[Guest]

Mail ID : vijay_27shiva AT yahoo.co.in
OBJECTIVE
To work in an organization where I can get an opportunity to exhibit my professional skills to obtain persuasion for dedication done by me and to enhance my knowledge, so that I could help the organization in fulfilling the corporate objective along with my personal objectives.
Executive Summary
Graduate in Mechanical Engineering with experience as piping Engineer in Oil & Gas, power plant and Process industries, which includes Pre bid activities, Equipment layouts, 3D modeling, Preparing Piping Layouts, Selection of pipe supports as per stress requirement, Pipe supports modeling, Extraction of Isometric drawings, Generating Reports like Bill of Materials for piping and Preparation of Special support sketches etc.
TOTAL PROFESSIONAL EXPERIENCE
12+ Years
TECHNICAL QUALIFICATION
Graduate in Mechanical Engineering from JNTU in 2003
Diploma in Mechanical Engineering from E.S.C. Govt Polytechnic, Nandyal in 1996.
AREA OF EXPERTISE
- A competent professional with over 10+ years of experience in the areas of Piping Design Engineering in Oil & gas Refinery, Chemical Plants and Petrochemical Industries.2 years of experience in GIS, fabrication & Erection field.
- Presently working with SAIPEM, Chennai, as Layout & Supports Engineer and well versed with Projects, Feeds and Proposals.
- Good working knowledge in International piping codes ASME 31.3 and other standards like ANSI, ASTM, API and Saudi Aramco Standards.
- Proficient at Development of Equipment and Piping Layout, Layout Feasibilities, Design Review, Vendor drawing review, Nozzle orientation, Co-ordination with other discipline, MTO activities, Site Experience, etc.
- To assist the assigned personnel on developing their activities, Provide Technical assistance to Drafting team / Designers to solve possible discrepancies Drawings, Specifications, to ensure adequate flow of information within the drafting team & uniformity / Quality in design, drafting team & Checking Isometric and Layout Drawings etc.
- Hands on experience in detailed Engineering Piping Design, Feasibility layout, General Arrangement Layouts, Piping Layout, Under Ground Piping Layout, Equipment layout, Preparation of Isometric Drawings, Supports Detail, etc.
- Selection of Supports as per stress requirement for critical lines & non Critical lines.

SOFTWARE PROFICIENCY
PDS
Pelican Forge
Smart Plant P&ID
Micro station -J
Auto cad-2D
Smart Sketch
Employment History :
Current employment Nov-2007 to Till Date Saipem India Projects Limited, Chennai.
Previous employment May-2002 to Nov-2007 Avineon India Pvt. Ltd., Hyderabad.
July-2000 to Apr-2002 Ramtech Corp. Pvt. Ltd., Hyderabad.

DETAILS OF PROJECTS HANDLED IN SAIPEM
CLIENT : Dragon Oil (Turkmenistan) Ltd
PROJECT BRIEF : Generic Feed for Wellhead Platform
ROLE : Layout Engineer
JOB INVOLVEMENT :

Layout Preparation for DOTL intends to develop a wellhead platform with Jack-up drilling, Land based drilling rig and a Living quarter platform with a connecting bridge. Both the platform shall be designed for a 3000 STBOPD per each well with a total production of 20000 STBOPD. All the wells are completed as dual string producers. The Platform shall have a Bullet Tank, LP Seperator, Test Separator, Flare KO drum and Wet slop Tank.
CLIENT : Saudi Arabian Oil Company
PROJECT BRIEF : Gas Oil separation Plant
ROLE : Support Engineer
JOB INVOLVEMENT :

- Selection of pipe Supports as per Stress Requirement.
- Supports modeling by using Pelican forge for critical and non-critical lines.
- Preparation of Special Support Sketches.
- MTO for Special Supports.
- Support Feasibility Checking.
CLIENT : Saudi Arabian Oil Company
PROJECT BRIEF : Shah Gas Development Project
ROLE : Piping Engineer
JOB INVOLVEMENT :

MTO for the following areas - Slug Catcher, Gas regeneration and condensate, hydrotreater unit, solvent regeneration and Dehydration unit.
CLIENT : Abu Dhabi Gas Liquefaction Company Ltd. (ADGAS)
PROJECT BRIEF : Integrated Gas Development Project – Das Island
ROLE : Piping Engineer
JOB INVOLVEMENT :
- MTO Preparation module wise.
- Preparation of Feed Endorsement Documents.
_______________________________________________________________________
CLIENT : Snamprogetti
PROJECT BRIEF : Bandar Abbas (Condensate Distillation Unit-1&Unit-5)
ROLE : Piping Engineer
JOB INVOLVEMENT :
- Equipment modeling - Routing of Piping as per the Process requirements using P&I Diagrams
- ajor modifications including new big bore line routing to the Basic Model sent by M.O.C (Milan Overseas Company)
- Further Updating the modified model review comments made by M.O.C.
- Flow Checking
_______________________________________________________________________
CLIENT : Snamprogetti
PROJECT BRIEF : Qatofin LLDPE Plant
ROLE : Support Engineer
JOB INVOLVEMENT :

- Preparation of Special Support sketches.
- Supports Feasibility Checking.
- Supports Material take off.
DETAILS OF PROJECTS HANDLED IN AVINEON INDIA PVT. LTD.,
CLIENT : British Petroleum.( Aptech, U.S.)
PROJECT BRIEF : Crude Oil Treatment Plant
ROLE : Piping Engineer
JOB INVOLVEMENT :
Preparation of Isometrics Input in CAESAR-4.5.
CLIENT : Thermax, India
PROJECT BRIEF : Power Projects
ROLE : Piping Engineer
JOB INVOLVEMENT :
- Equipment modeling
- Piping routing & modeling as per the system requirements using P&I Diagrams.
- Structure Modeling Using Frameworks plus.
- Generation of 2D GA Drawings for Piping & Equipments from 3D model.
- Isometric Generation.
- Support Detailing.
- Review the 3D Model – Internal & external with client.
_______________________________________________________________________
CLIENT : Bechtel , U.S.A
PROJECT BRIEF : 750 MW Power Project (Doosan Babcock, U.K) (Overseas)
ROLE : Piping Engineer
JOB INVOLVEMENT :
- Equipment modeling
- Preparing support philosophy drawings.
- Piping routing & modeling as per the system requirements using P&I Diagrams.
- Generation of 2D GA Drawings for Piping & Equipments from 3D model.
- Isometric Generation
____________________________________________________________________
CLIENT : LNG Plant -Qatar
PROJECT BRIEF : Nitrogen Separation Plant (Air Liquide)
ROLE : Piping Engineer
JOB INVOLVEMENT :
- Equipment modeling.
- Routing of piping as per P & I Diagrams.
- Isometric generation.
- Flow Checking.
- Generation of piping layouts from 3D models.
- Planning of day- today weekly activities of piping for achieving the deliverable schedule
- Making clash free with all the disciplines.
CLIENT : JGC, Singapore
PROJECT BRIEF : Titan Petrochemicals
ROLE : Piping Engineer
JOB INVOLVEMENT :
Checking and approval of basic and detailed engineering documents, and co-ordination of process engineering activities to meet schedules.
- Equipment modeling.
- Routing of piping as per P& I Diagrams
- Isometric generation
- Flow checking
_______________________________________________________________________
CLIENT : SOKU, Nigeria
PROJECT BRIEF : De bottle necking Project (SAIPEM, Chennai)
ROLE : Piping Engineer
JOB INVOLVEMENT :
- Flow Checking.
- Creating Views for supports using micro station.
- MTO preparation for Supports.
_______________________________________________________________________
CLIENT : Ras Gas, Qatar
PROJECT BRIEF : Ras Laffan Natural Gas (Technip ,Chennai)
ROLE : Piping Engineer
JOB INVOLVEMENT :
Creating piping & instrumentation diagram using Intergraph’s Smart Plant P& ID.
_______________________________________________________________________
CLIENT : Qatar Gas, Qatar
PROJECT BRIEF : Qatar Gas
ROLE : Piping Engineer
JOB INVOLVEMENT :
Creating piping & instrumentation diagram using Intergraph’s Smart Plant P& ID.
_______________________________________________________________________
DETAILS OF PROJECTS HANDLED IN RAMTECH CORPORATION PVT. LTD.,
_______________________________________________________________________
ROLE : Cad Engineer
Duration : July 2000 to April 2002
JOB INVOLVEMENT :
GIS projects British Telecom (U.K), MCI Telecom (U.S).