www.betasoftsystems.com Beta Soft Systems Delhi : Piping PDS / PDMS, SPR, Navis

[Admin]

Beta Soft Systems Delhi : Lead Engineer - Piping
Website: http:// www.betasoftsystems.com

Keywords: Preparation of piping Design, Development of piping and valve,piping layouts and equipment layouts,GADs, Isometrics, supports, bill of materials,stress analysis and nozzle load analysis,enquiry documents,PDS / PDMS,SPR,Navis.

Designation: Lead Engineer - Piping
Experience: 10 - 20 Years
Location: Delhi
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Other
Posted Date: 01 May 2009

Job Description:
Preparation of piping Design basis.
Development of piping and valve material specification.
Development of conceptual piping layouts and equipment layouts.
Review of piping design drawings including GAD’s, Isometrics, supports, bill of materials.
Review of stress analysis and nozzle load analysis.
Review of enquiry documents /material requisitions /technical bid analysis and purchase requisitions.
Preparation of construction tender specifications.
Review of contractor drawings and documents.
Development and upgradation of technical specification and standards
Planning of resources and job allocation
Working knowledge of PDS/PDMS,SPR,Navis works
Progress monitoring and reporting

Desired Candidate Profile:
Preparation of piping Design basis.
Development of piping and valve material specification.
Development of conceptual piping layouts and equipment layouts.
Review of piping design drawings including GAD’s, Isometrics, supports, bill of materials.
Review of stress analysis and nozzle load analysis.
Review of enquiry documents /material requisitions /technical bid analysis and purchase requisitions.
Preparation of construction tender specifications.
Review of contractor drawings and documents.
Development and upgradation of technical specification and standards
Planning of resources and job allocation
Working knowledge of PDS/PDMS,SPR,Navis works
Progress monitoring and reporting

Company Profile:
A client of Betasoftsystems

Executive Name: Ishita Mittal

Address:
SCO No. 398
Sector- 20, Urban Estate
Panchkula
Panchkula,Haryana,INDIA 134 112

Email Address: ishita@betasoftsystems.com

Telephone: 9779181122

Keywords: Preparation of piping Design, Development of piping and valve,piping layouts and equipment layouts,GADs, Isometrics, supports, bill of materials,stress analysis and nozzle load analysis,enquiry documents,PDS / PDMS,SPR,Navis.

[Guest-IJT]

Dear Sir,

I am writing in response to your advt. in indianjobtalks.com for a Process Design Engineer position in L&T Valdel Engineering Chennai . With my previous experience in various roles, I believe I am a perfect candidate for the position with your organization.

I have 3 years hands-on experience in the domain of Process Engineering & Design. Presently I am working as Senior Engineer-Process in PL Engineering Ltd., (Formerly Simon Carves India Ltd., A Punj Lloyd Company), Gurgaon. I have sufficient experience in Basic, FEED and Detailed Engineering. Besides, I am conversant in Process Engineering Simulation softwares like Aspen Hysys, Aspen HTFS and Aspen Flarenet.

For further evidence of my qualifications, I have enclosed my Curriculum Vitae for your kind consideration.

I enjoy my work here very much and believe that I could make a greater contribution to the company in the position of Process Engineer. Therefore, I thank you in advance for considering my application and hope to have the opportunity to meet with you soon.

Please feel free to call me at 09999804689 if you would like to schedule an interview to discuss this opportunity in detail.

Thanks & Regards,

R.NATARAJAN
Enclosure: Curriculum Vitae

CURRICULUMVITAE
R. NATARAJAN
138, Munirka, New Delhi-67
Mobile: 09999804689
Email: natraj_btech AT yahoo.co.in

Objective
· Seeking a position to utilize my skills and abilities in the process engineering that offers professional growth while being resourceful, innovative and flexible and
· A challenging position in chemical engineering which employs my extensive process design and manufacturing experience.

Key skills & Knowledge areas
· Offshore process (Topside process platforms)
· Gas processing (Gas dehydration and TEG regeneration system)
· Refinery operations (Hydrogen Generation Unit)
· Renewable energy (Polysilicon)
· Process simulation (HYSYS, HTFS, FLARENET)
· Sugars & Distilleries (Manufacturing)

Experience (Total experience: 3+ Years)
PL Engineering Ltd,Gurgaon. (A Punj Lloyd Company) May ‘08 Till date Senior Engineer-Process
Kavin Engineering And Services Private Ltd., Coimbatore, TN. Aug ‘07 April ‘08 Process Engineer-Trainee
Shree Ambika Sugars Ltd., TN. July ‘06 July ‘07 Graduate Engineer Trainee

Project Experience
PL Engineering Ltd. (A Punj Lloyd Company), Gurgaon, Haryana.

* Project Title: INITIAL DESIGN AND FEASIBILITY STUDY FOR TANK FARM PROJECT in Cork, Ireland.

Client: Global Liquid Solutions Limited.
Task Performed:
v Process Flow Diagram preparation
v Piping & Instrument Diagram preparation
v Equipment List preparation
v Pump hydraulics calculation
v Process Design Basis Preparation and
v Hazardous source list preparation.

* Project Title: MUMBAI HIGH SOUTH, ICP-R PLATFORM PHASE-2 RE-DEVELOMENT PROJECT (Proposal)

Client: ONGC., India.
Task Performed:
v Process Simulation and Heat and Mass Balance Table preparation (Using ASPEN-HYSYS) for Gas dehydration and TEG Regeneration, Compressor Packages
v Equipment list preparation
v Process datasheet preparation for Gas dehydration and Fuel gas generation system.
v Equipment list preparation

* Project Title: SOLAR GRADE POLYSILICON 2500 MTPY PROJECT

Client: Kun Renewables.
Task Performed:
v Process datasheets preparation for Distillation Section
v Line list preparation for Distillation Section
v Instrument Process Datasheet preparation for Distillation Section
v Pump hydraulics calculation
v Equipment List preparation
v Vendor documents review

* Project Title: DHT – HYDROGEN GENERATION UNIT PROJECT (Proposal)

Client: HPCL, Mumbai.
Task Performed:
v Equipment list preparation
v Line sizing and Pump hydraulics calculation
v Piping & Instrument Diagram preparation
v Hazardous source list preparation.
v Vendor documents review

* Project Title: DHT – HYDROGEN GENERATION UNIT PROJECT (Proposal)

Client: HPCL, Vizag.
Task Performed:
v Equipment list preparation
v Line sizing and Pump hydraulics calculation
v Piping & Instrument Diagram preparation
v Hazardous source list preparation.
v Vendor documents review

* Project Title: BANIAS REFINERY REVAMP (Proposal)

Client: Punj Lloyd, New Delhi.
Task Performed:
v Client documents review
v Line list preparation
v Interconnection diagram for process and utility units
v Cooling water, Fuel Gas and Fuel Oil network integrity checking
v Fuel Gas Knockout Drum sizing

* Project Title: THAMMAMA-C ASAB LEAN GASPIPELINE PROJECT (Proposal)

Client: ABU DHABI GAS INDUSTRIES LTD. (GASCO)
Task Performed:
v Client documents review
v Line list preparation
v Technical query preparation


Kavin Engineering And Services Private Ltd., Coimbatore, Tamilnadu.

* Project Title: ESPOIR IVORIEN GAS DEHYDRATION UPGRADATION PACKAGE

Client: VME Process.
Task Performed:
v Process Flow Diagram preparation
v Piping & Instrument Diagram preparation
v Process Simulation and Heat and Mass Balance Table preparation (Using ASPEN-HYSYS) for Gas dehydration and TEG Regeneration system
v PSV sizing calculation
v Line sizing calculation
v Line list preparation
v Process Description preparation
v Process Control Narratives preparation
v Equipment List preparation
v SAFE Chart preparation and
v Cause and Effect Chart Preparation

* Project Title: TSJOC SRKP Field Development Project

Client: MODEC, Singapore.
Task Performed:
v Commissioning Procedure prepared for the complete Topside Process Systems which includes; Crude Stabilization System, Water Injection System, Produced Water Treatment System and Fuel Gas Treatment System and Flare System.

* Project Title: Apache Ningaloo Vision Project

Client: PROSAFE.
Task Performed:
v Piping & Instrument Diagram preparation
v Process Control Narratives Preparation for Gas dehydration and TEG Regeneration system

* Involved in many Proposals as a team member.



Simulation Softwares Known
· Aspen-HYSYS
· Aspen-HTFS
· Aspen-FLARENET
· Familiar with all in-house softwares: PSV Sizing, Line sizing, Pump calculation, Vessel sizing, etc.
Job Responsibilities
PL Engineering Ltd. and Kavin Engineering and Services Pvt. Ltd.
· Performing Process simulation for Heat and Mass Balance Table using Aspen- HYSYS simulation software.
· Preparation of engineering drawings and documents (HMBT, PFD, P&ID, Process calculations, line sizing etc.).
· PSV sizing and pump hydraulics.
· Preparing process datasheets for equipments, packages and instruments.
· Preparing commissioning procedure.
· Preparing interlock list and cause and effect diagram.
· Safety Analysis and Function Evaluation Charting.
· Knowledge in API RP (14C,14E,520,521) standards and Shell DEP (20.04.10.10).
Shri Ambika Sugars Ltd
· Involved in production and maintenance of 5000 TCD sugar plant as a shift in-charge
· Effectively took part in the Project team in Technical assistance for expansion of sugar plant from 5000 TCD to 7500 TCD
Education

Co-curricular Activities
· Completed certificate course in Diploma in Computer Applications (DCA).
· Ball badminton player.

Personal Information
Name : R. NATARAJAN
Father’s name : M. Ramasubramanian
Date of birth : 25-05-1984
Address for communication : C/O. R.Muthukrishnan,
63, Venkatesa Perumal Nagar,
Balaji Street, Valasaravakkam,
Chennai-87.
Nationality : Indian
Religion : Hindu
Gender : Male
Marital status : Unmarried
Languages known : English, Hindi, Tamil.
Passport No. : F91147120
Place of issue : Tiruchirappalli
Date of issue : 31-08-2006
Date of expiry : 31-08-2016

DECLARATION
I hereby declare that the particulars of information and facts stated above are true and complete to the best of my knowledge and belief.

PLACE: New Delhi. Yours sincerely,
DATE: