Furnace Fabrica India Ltd : PDS PDMS Piping Designer

[Admin]

Furnace Fabrica (India) Ltd. All india : PDS / PDMS Designer-Piping
Website: http://www.furnacefabrica.com

Keywords: 3D- modeling

Designation: PDS / PDMS Designer-Piping
Experience: 5 - 6 Years
Location: All india
Education:
UG - Diploma - Mechanical
PG - Post Graduation Not Required
Industry Type: Construction/ Engineering/Cement/Metals
Functional Area: Other
Posted Date: 29 Apr 2009

Job Description:
Looking for PDS / PDMS Designer / Piping.

Desired Candidate Profile:
PDS / PDMS Designer/ Piping with 5-6 years hands-on-experience in 3D- modeling with minimum of two years experience in piping engineering. Shall have ITI Draughtsman Certificate / Diploma in Mechanical.

Company Profile:
Furnace Fabrica (India) Limited is a premier EPC company with annual turn over of Rs.300 crores and an employee strength of 350Nos. The company has working arrangement with OUTOTEC, Germany for turnkey execution of Gas Cleaning, Sulphuric Acid and fluid bed calcinations plants apart from industrial plant executions for chemical fertilizer, Petroleum sectors both in India & Overseas.
The company is looking out for talented and efficient professionals for its projected future and ongoing operations.
The selected candidates will placed in Mumbai as well as various sites in India & abroad. Assistance will be given for accommodation in Mumbai.

Address: Not Mentioned

Email Address: bhonsale@furnacefabrica.com

Telephone: Not Mentioned

Keywords: 3D- modeling

[rajk09]

CURRICULUM VITAE

B.Rajesh Goud
Flat.No:403 ,
Vishal Residency,
Madinaguda,
Hyderabad – 500049.
Ph.No.9703500473, Res.No.040-23838691, 040-40216161
Email: rajk09@gmail.com


CAREER OBJECTIVE: To obtain a perfect position as Engineer in professional environment by giving my right attitude and aptitude towards implementing engineering technological methods and skills successfully with passion.


PROFESSIONAL EXPERIENCE:
FROM MAY-2006 TO TILL DATE in POWER PIPING
Presently working as ENGINEER IN
Simon Carves (A PUNJ LLOYD company)

- Worked as a Project Assistant at BHEL, Hyderabad in T&C Engineering Department since Feb 2007 to March-2008.

- Worked as CAD Engineer in POORNIMA CAD CENTER, Hyderabad for BHEL projects in Power Plant Engineering Department (PPE) Department
Since May-2006 to Feb-2007


JOB RESPONSIBLITES
- During working period getting involved in Pipe Size Calculations and knowledge on P & ID schemes like Main steam, Aux. steam lines, LP,HP,DEARERATOR Extraction steam lines Lube oil, Governing scheme, steam & drain, cooling water & Condensate flow systems

- Equipment layout, Piping layout, Auxiliary Equipment Foundation, Generation of Isometrics, Preparing Bill of Materials, Stress analysis & support arrangements.

- MODELLING AND DETAILING IN PDMS-11.6 & 11.5.

QUALIFICATIONS:
- Bachelor Degree in Mechanical Engineering with pass out in 2007 Affiliated to JNTU.

SOFTWARE SKILLS:

- PDMS Version 11.6 [Design Modules-Equipment, Structures, Pipe work, HVAC, CABLE TRAYS, DRAFT and ISODRAFT-Extracting Pipe Isometrics.]
- Auto-CAD 2006 (Extensive experience in drafting and generation of final drawings)
- CAEPIPE Version 5.11 [Flexibility Analysis Tool]



PROJECTS:


Client : EID PARRY- 1 X 18.5MW STG.
Tools : Auto Cad 2006,
Team size : 2
Project#1


Involvement:


- Steady of aver all Plot Plan and Scope of work.
- Steady of P &IDs.
- Steady of Equipments GA drawings and civil inputs.
- Engineering of Equipment Layout.
- Engineering of Piping Layout.
- Extraction of Piping Isometrics from piping layout.
- Preparing of Bill of Material.
- Marking of supports in piping layout.
- Plate inserts & floor openings.

Project#2
Client : KPCL-BALLARY 1X500 MW (TD-BFP)
Tools : CAEPIPE 5.11, Auto Cad 2006, PDMS 11.6
Team size :
Involvement:


- Steady of aver all Plot Plan and Scope of work.
- Steady of P &IDs.
- Steady of Equipments GA drawings and civil inputs.
- Engineering of Equipment Layout.
- Engineering of Piping Layout.
- Modeling of all equipments and civil structures and Foundations in PDMS.
- Modeling of piping layout in PDMS.
- Extraction of Isometrics from PDMS ISO DRAFT.
- Preparing of Bill of Materials.
- Stress analysis
- Plate inserts &Floor Openings.

Project#3

Client : BORL 1 x 33 MW
Tools : CAEPIPE5.11, Auto Cad 2006, PDMS 11.6
Team size : 5
Involvement:

- Steady of aver all Plot Plan and Scope of work.
- Steady of P &IDs.
- Steady of Equipments GA drawings and civil inputs.
- Engineering of Equipment Layout.
- Engineering of Piping Layout.
- Modeling of all equipments and civil structures and Foundations in PDMS.
- Modeling of piping layout in PDMS.
- Extraction of Isometrics from PDMS ISO DRAFT.
- Preparing of Bill of Materials.
- Stress analysis
- Plate inserts &Floor Openings.
- Modeling in PDMS(Equipments, Civil, Piping, extracting of isometrics & DRAFT )

Project#4

Client : PT-IBR 1X15 MWSTG
Tools : Auto Cad 2008, PDMS 11.6
Team size : 4


Involvement:

- Steady of aver all Plot Plan and Scope of work.
- Steady of P &IDs.
- Steady of Equipments GA drawings and civil inputs.
- Engineering of Equipment Layout.
- Engineering of Piping Layout.
- Modeling of all equipments and civil structures and Foundations in PDMS.
- Modeling of piping layout in PDMS.
- Extraction of Isometrics from PDMS ISO DRAFT.
- Preparing of Bill of Materials.
- Plate inserts &Floor Openings.
- Modeling in PDMS(Equipments, Civil, Piping, extracting of isometrics & DRAFT )

Project#5

Client : RINl, Expansion project
Tools : , Auto Cad 2006, PDMS 11.6
Team size : 4

- Steady of aver all Plot Plan and Scope of work.
- Steady of P &IDs.
- Steady of Equipments GA drawings and civil inputs.
- Engineering of Equipment Layout.
- Engineering of Piping Layout.
- Modeling of all equipments and civil structures and Foundations in PDMS.
- Modeling of piping layout in PDMS.
- Extraction of Isometrics from PDMS ISO DRAFT.
- Preparing of Bill of Materials.
- Plate inserts &Floor Openings.
- Modeling in PDMS(Equipments, Civil, Piping, extracting of isometrics & DRAFT )

Project#6

Client : PTTPE LDPE PROJECT
300KTA LDPE PLANT, MAP TA PHUT.THAILAND
Tools : PDMS 11.6

Involvement:

- EXTRACTION OF ISO METRICS AND REWAORK IN PIPING
- EQUIPMENT MODIFICATIONS
- EXTRACTION OF SUPPORT SCHEDULES

STRENTHS:
- Commitment and determination towards work.
- Ability to learn new technologies and concepts.
- Practical interpersonal skills.

PERSONAL DATA:

Name: B.Rajesh goud
Father’s Name: B.Gopala Krishna
Date of Birth: 09.12.1982
Languages Known: English, Hindi and Telugu
Marital Status: Single
Nationality: Indian

REFERENCES:

Sri S.K.Dash
Manager
T&C Engg, Power Plant Engg
BHEL, R C Puram
Hyderabad-502032
Ph: 23184542 (Off)
Email: skdash@bhelhyd.co.in B.RAJESH GOUD

[Guest Poster]

i am looking job in pds and pdms pls. co. me 9718886899