www.sudarshan.com CHEMICAL INDUSTRIES Ltd Mahad : Piping, Erection Engineer

[mskavi]

SUDARSHAN CHEMICAL INDUSTRIES LIMITED Mahad : Erection Engineer – Based at Mahad
Website: http://www.sudarshan.com

Designation: Erection Engineer – Based at Mahad
Experience: 3 - 4 Years
Location: Mahad

Job Description:
1. The candidate should have good exposure to execution of Projects in Chemical Industries.

2. He should have detail knowledge about the installation of Equipments/Piping

3. Must have worked with Chemical Industries.

Desired Candidate Profile:
DME/BE(Mech) with 3-4 years of experience in execution of Projects with Chemical Industries.

Company Profile:
Our vision is to be a world class manufacturer of Pigments , Agrochemicals and Specialty Chemicals. We are on a high growth trajectory in our aspiration to be #1 in Asia for agrochemicals and pigments.
We offer a very challenging environment for result oriented individuals. We need highly focused personnel who believe in achieving demanding targets .

Address:
SUDARSHAN CHEMICAL INDUSTRIES LIMITED
162 Wellesley Road
Next to RTO
Pune,Maharashtra,INDIA 411001

To apply, send CV to Email Address: careers@sudarshan.com

Keywords: DME / BE Mech with 3 - 4 yrs. of experience

[Guest]

N.Srinivasan
Employed as CONSULTANT – Piping & Construction in a Petro-chemical

Consultancy firm at BANGALORE from 8th JUNE 2006 to 7th April 2009.( 34 Months)

Work Experience :
Worked at projects for PIPING Erection and Inspection of BOILER & TURBINE piping.
Organized a team of work force managed to complete the work in time schedule.
Checking of piping GAD’s and Equipments drawings for Gujarat Refinery.
Checking of ISOMETRIC drawings for stress analyzed lines.
Special supports marked and developed for sulphuric acid plants, liquid ethanol projects, carbon black projects & polymer plants.
Jacketed ISO’s checked for stress analyzed lines for proper supports &proper selection of springs.
Checking of piping Layouts ,Isometrics ,Piping BOMs, Hanger Support sketches prepared in line with stress Analysis reports. for Ethanol plants, sulphuric acid plants, Carbon black plants etc.

Reviewing of Auto Plant models :
Checking for Interferences of Pipes, Structures, cable trays etc
Mismatch of fittings, Head clearances, walkways, accessibility of Hand operated valves, Instrument locations for easy reading of gauges etc.
Nozzle Orientations on equipments, Pipe support locations with type of supports.
Preparation of Hand made sketches for Special type supports which are not appearing on company standards.
Guiding of juniors, freshers on pipe support selection and location of supports etc on critical pipe routings.

Work Experience :
Was employed as CONSULTANT Piping Engg in a Good
Consultancy firm at Chennai ( MADRAS) from October 2005 to May 2006
a)Doing static Analysis for cogeneration plants from 8Mw to 60Mw sets for various sugar plants.
b)Hanger support sketches prepared for co - generation sets.
c)BOM quantities checked .
d)Fabrication drawings are checked before Final Release for fabrication/construction.
e)Sugar plant site visited to finalize Piping routing and terminal points for various service lines.
f)Trained freshers for Piping layout and detail engineering activities also to do stress analysis on CAESAR software.
BHEL New Delhi ,PEM - CONSULTANCY(Mech Piping &Layouts)

Senior Piping Engineer June 2001 to August 2005
Done Static Analysis for steam, extraction, feed water, condensate & vent - drain piping systems of power plants. Reports prepared for Hangers/support loadings.
Ensuring the essentiality &number of Metal Expansion Bellows , Size ,Type etc.
Preparation of Mfg Quality Plan, Tech Spec. and Data sheets. for MEB.
Vetting of vendor drgs , , EJMA calculations ,material deviations, raise clarifications etc Prepare Technical recommendations for different bidders.
Co - ordination with others like procurement, Inspection, customer / consultant etc.
Erection sites technical Queries/ SAR’s/ for piping are attended and replies were made. Attended site problems and remedial solutions are given.
BHEL,PEM New DELHI (Mechanical Piping& Layouts)

Piping Engineer June 1996 to june2001
Static Analysis done for pipelines for sets of 500mw, 210Mw, 120Mw, 60Mw, 30Mw coal fired ,co gen. and gas-based projects .by using CAESAR II & Mec21.
Assisted to do Dynamic Analysis for critical piping MS, CRH &HRH.
support group : (valves section)
Estimating the requirement of valves for complete power plant valves type, size ,rating, and quantity. Bidder enquiries technically scrutinized for procurement activity.

General Foreman (piping &layouts engg) june1994 - june1996
Checked vendor/out sourced drawings/comments/clarifications marked.
Composite piping layouts developed/Isometrics developed /checked for auxiliary steam/feed water/condensate/vent & drain and low pressure pipelines.

Foreman (piping & layouts engg) june1989 - june1994
Co - generation power plant 110mw size plot plan, equipment layout plan were developed and complete piping (high, medium, low, very low pressure) routed on pipe racks. 3 Gas turbines F6 and 3HRSG’s are located. Liquid Fuel storage equipment located and relevant pipings are routed.
Individual steam pressure headers are static analysed for different load conditions by anchoring /isolating the other headers.
Asst Foreman (piping & layouts engg) june 1985 - june1989 Combined cycle power plant 180 mw(2steam turbine+4Gas turbine)
Developing of composite piping drawings as per PID’s of steam, extraction, condensate, feed-water, and vents ,drains.
4x210mw thermal sets coal fired complete system piping composite/equipment/isometric drawings are prepared. piping & fittings BOM prepared. Lp piping vendor prepared drawings checked and commented.
Supervisor (piping& pipeline design Detail engg) BHEL Piping Center ,CHENNAI( MADRAS) &

Pipeline design engg. BHEL TRICHY Feb1980 to june1985,
Preparation of welding schedules,hanger /pipe supports schedules.
Developing of Isometric drawings and Checking of Fabrication/shop Drawings.
Liasion with Boiler Inspector and other Inspection agencies Llyods,PCR etc.

Technician Trainee - Oct 1978 to Feb 1980 - BHEL High Pr..Boiler plant TRICHY Training taken for PID’s study and preparation of 2D and Isometric PIPELINE drawings/hanger engg/
stress analysis/site requirements/erection guidance etc.
Periodical visits to pipe manufacturing shops/NDT techniques/Weld joint defects/remedy.
Preparation of part drgs with guidance/discussion with experts about piping draw in gs importance,differences in the usage of materials,preparation of BOM weld in g rods quantity,hanger types and applications, underground pip in g design implications etc.
This training converted the Individual’s carrier from shop floor to Piping Engineering work.

Shop Floor Experience :
Boiler Production(Medium fabrication shop)Jan1968 to Oct 1978
Fabtication & assemb;y of heavy size pressure vessels for namrup fertilizers, Hydraulic testing of the same for Llyods, PCR and other leading agencies satisfaction and approval.
On rotating machines.worked with CHEZCHOZLOVAKIANs one year for Ball Mills, Hammer molls, Bowl Mills. Visited projected project sites to recrtify the mills seal leakages and arranged permanent remedial solutions, worked with GERMAN EXPERTS Six months for Fans fabrication assembly .Dynamic balacing of heavy duty IMPELLERs for FD,ID,GR fans. Hands on with USA Combustion Engg experts for six weeks for Bowl Mills assy &testing on no , oad conditions.. Attained a good skill on weld techniques/weld repairs/weld procedures/welder’s qualification etc.
Intensive in plant Trainee : BHEL High Pr. Boiler Plant ,TRICHY, May 1967 - Jan 1968
Remarks: Self can work as good piping engineer/layouts/detail engineering/stress analysis/piping Inspection/erection.

Name : N.Srinivasan
Date of birth : 01 - 08 - 1945
Marital Status: Married
Qualifications: Diploma In MECH ENGG Oct 1974
Post Diploma in METALLURGY march 1980

3 years (January 1964 to February 1967) Full term Apprenticeship CRAFTSMAN Training under the apprentices act 1961 . M/s ITILtd.Dooravani nagar, Bangalore - 560016.
Eight months “INTENSIVE INPLANT TRAINEE” in the FITTER trade during 1967 to 1968 .
General information : Self with good health with clean habits

SIGNED: N.SRINIVASAN
DATE: 17-09-2009,Bangalore.34

[Guest]

CURRICULUM VITAE
ANIKET R. NIMJE
Petrochemical Engg.
Email ID : fatecaster03 AT gmail.com

OBJECTIVE :
Looking forward to work in a challenging environment, which gives me an opportunity to enhance my technical skills and analytical abilities, so that I am able to grow along with the company.

EDUCATIONAL QUALIFICATION :
Examination Institute University / Board SGPA CGPA Year of Passing
Semester-VII Dr.Babasaheb Ambedkar Technological University, Lonere.
H.S.S. C. L.B.S. Jr. collage, Bhandara. Maharashtra Board 77.17% 2007
S.S.C. St. Paul Eng. School, Bhandara. Maharashtra Board 80.80% 2005
Aggregate Grade points (C.G.P.A) : 7.35

COMPUTER PROFICIENCY:
- C language
- C++

PROJECT WORKS :
- Removal of H2S form biogas in absorption column by using fe/NTA chillets.

CO-CURRICULAR ACTIVITIES:
- Participated in national level poster presentation.
Topic : Ocean Thermal Energy.
- Coordinated state level Quiz competition.
- Also an Joint secretary in 3rd year.

[Unregistered]

RESUME
VAIBHAV RAMCHANDRA SHINDE
Email id : vaibhavshinde764 AT gmail.com

EDUCATIONAL QUALIFICATION :
Exam Year of Passing University/Board Percentage :
B.M.S. April- 2013 Mumbai University First Class.
H.S.C. Feb- 2010 MSBSHSE 49.83
S.S.C. Mar- 2008 MSBSHSE 50.00

SOFTWARE PROFICIENCY :
MS-CIT

CO-CURRICULAR ACTIVITIES :
T.C.S. Co. Training camp

PERSONAL PROFILE :
Name : Vaibhav Ramchandra Shinde
Father’s Name : Ramchandra Maruti Shinde
Date of Birth : 18/03/1993
Gender : Male
Nationality : Indian
Hobbies : Playing Cricket & Volleyball, listening music, Reading
Languages Known : English, Hindi & Marathi

Date :
Place : Mahad.
Vaibhav Ramchandra Shinde.