www.lancogroup.com Lanco Group Gurgaon : Ash, Coal Handling Engineer

[mskavi]

Lanco Group Gurgaon : Ash Handling Engineering- Engineer/ Assistant Manager / Deputy Manager
Website: http://www.lancogroup.com

Keywords: Mechanical Engineering - Ash & Coal Handling

Designation: Ash Handling Engineering- Engineer/ Assistant Manager / Deputy Manager
Experience: 3 - 8 Years
Location: Gurgaon
Education:
UG - B.Tech/B.E. - Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 21 Apr 2009

Job Description:
Preparation of alternative layouts and flow schemes, system capacity calculations, AHS water requirement calculations, disposal system calculations, storage silo sizing, ash pond sizing, selection & optimization of equipments; studying, comparing and outlining various advantages & disadvantages of alternatives, final recommendation to the client etc.,

Desired Candidate Profile:
1 ) Candidate must have experience in mechanical engineering design of Ash and coal handling plant of a power plant
2) Must have knowledge of latest systems and softwares
3) Experience in power plant design is a must.

Company Profile:
LANCO Group, a diversified conglomerate with an asset base of USD 500 million, is one of the fastest growing corporate entities in India. LANCO has more than two decades of experience operating in the core sectors of Power Generation, Power Trading, Realty, Engineering and Construction, Information Technology and Manufacturing.

Executive Name: Prince Mathew

Address:
Lanco Group
Plot No 229, Udyog Vihar Phase - 1
Gurgaon,Hariyana,INDIA 122016

To apply, send CV to Email Address: prince.mathew@lancogroup.com

Telephone: 91-0124-4691000

Keywords: Mechanical Engineering - Ash & Coal Handling

[farid shaikh]

RESUME
Farid Ahmad Shaikh Rashid
C3/5 Reliance colony, Dahanu
Dist- Thane – 400 605.
Mobile: 9325119792/9423371976
E-mail: babafarid_1969 AT indiatimes.com
sarafarid_2005 AT yahoo.com
Objective
* To secure a promising position that offers both a challenge and a good opportunity for growth.

Technical qualification
* completed part time degree in electrical engineering from dnyaneshwar vidyapith pune in 2005 with first class
* Diploma in Electrical Engineering from Maharashtra State Board of Technical Education, Mumbai (Government Polytechnic, Amravati in summer 1989 with aggregate of 61.67%.

Education qualification
* Completed S.S.C. from new English school shirasgaon tq chalisgaon Division in March 1984 with 75.14%

Work experience
* Reliance energy ltd – manager since september1992 at Reliance Energy Dahanu Thermal Power Station, Dahanu to till date.
§ From sept 1992 to sept.1993 one year training in Npti Nagpur with two weeks simulator training in NPTI Delhi
* Oct.1992 to Jan. 1993 worked in construction power supply in dtps.
* Jan 1993 to may 1993 four months TPS operation training in super thermal power station korba (m.p)with two weeks simulator training.
* From june 1993 to 1998 worked as local turbine operation engineer
* From 1998 to 2000 worked as off site operation engineer
* From 2000 to 2001 worked as boiler local operation engineer.
* From 2001 to to 2003 worked as boiler desk operation engineer.
* From 2003 to 2005 worked as turbine desk operation engineer.
* From 2005 to till date working in CHP control room as shift charge engineer.operation and maintainance of coal handling plant.
* Erection and commisioning of coal handling plant DCRTPP Yamunanagar(Haryana) and Rosa (UP)
* Coal yard management and rail track inspection and maintainance
* Completed one year apprenticeship training in MSEB Bhusawal Thermal power station from 1989 to 1990.
* Total 18 years exp in thermal power plants.

* Personal data
* Gender : Male.
* Date of birth : 30th may 1969.
* Marital status : maried.
* Nationality : Indian.
§ language known : English, Marathi & Hindi
I hereby declare that the above information is true to best of my knowledge.

Farid S Shaikh

[Guest]

Respected Sir,I am very keen to join your organijation .so please sadeuled my enterview as soon as poslsiba

[Guest]

dear sir/mam
i want to join in ur company as a safety officer, right now i am working in blue star ltd. Gurgaon. plz reply
regards,
Rajeev R Choubey
Mob-
mail rajeevrchoubey@gmail.com

[Guest]

NAME : SIVA KRISHNA KUMAR.CH
Email (Primary) : sivachillapalli AT gmail.com
Email (Alternante) :sivachillapalli AT rediffmail.com
Educational Qualifications
Course Name of the University/Institution % Marks
B-Tech in Electrical & Electronics Engineering.
in 2010. S.S.I.E.T, Nuzvidu, affiliated to J N T University, Kakinada. 63%
XII Standard (10+2)
in 2006
Aditya Junior College, Vijayawada. 75.5%
X Standard (10th )
in 2004 Sravanthi high school, Gannavaram. 90%
Present Working Status
- Working as a Trainee Engineer (Hydro Mechanical Engineer) for P.E.S Engineers Pvt Ltd for HYDRO ELECTRICAL PROJECT (4*125)M.W in “Sikkim”.
- Client is LANCO Group.
- Experience : From November-2010 to Till Up to now.
- Nature of work : Erection of Barrage Radial Gates & Stop log Gates.
Relevant Courses Undertaken
- Completed 2weeks Certification training program in “programming & Applications of P.L.C (SIEMENS S7-300)” from Advance Training Institute, Hyderabad.
- Completed 2weeks Certification training program in “Industrial Maintenance & Safety (Electrical)” from Advance Training Institute, Hyderabad.
Academic Projects undertaken
Project Title : A T-CONNECTED TRANSFORMER AND THREE-LEG VSC BASED D-STATCOM FOR POWER QUALITY IMPROVEMENT.
Brief Overview of Project : A three-leg voltage source converter based distribution static compensator is integrated with a T-connected transformer for the compensation of reactive Power for voltage regulation or for power factor correction, along with load balancing, elimination of harmonic currents and neutral current Compensation.
MiniProject Title : AUTOMATIC PHASE CHANGER.
Brief Overview of Project : In many of appliances in industries and house hold voltage sensitive devices will be affected from low voltage caused in any one of the phase. In those conditions if low voltage is available in one of the phase and you want your equipment to work on normal voltage. The circuit will solve the problem.
Computer Skills
- Computer Languages : Basics of “c”
- Operating systems : Windows 2000,XP
- Packages : MS office. (Word & Excel).
Positions of Responsibility
- Class Representative (C.R.) of Electrical Engineering batch in B.Tech.
- Volunteered various blood camps in college.
Awards & Paper Presentations
- Won Second Prize in Mandal Level Talent Test competition.
- Won a merit Scholar ship in SSC in school level.
Hobbies
- Listening Songs, Reading News Papers, Bike Riding.

[Guest]

CURRICULAM VITAE
Name :- PradeeP Kumar Mavi
Email :- pradeep.mavi AT yahoo.com
Academic Qualification

Diploma in Mechanical Engineering (DME) 1ST Div. June 06.
From - :Institute of Advance Study & Education Po-Gandhi
Vidya Mandir SardarShar Rajasthan-(331401)
Administration :-
1. Looking after site activates.
2. Planning and programming for site erection activities.
3. Dealing with vendors and agencies involved in erection activities.
4. Billing , BBU and protocol works.
5. Working knowledge of windows XP
Professional Background
1. Name of Organization :- M/s Drooshaba Fabricators.
Duration :- 5th Feb 2007 to Augast’2009
Designation :- Site Engineer

Current Employment
Company :- M/s Elecon Engg. Co. Ltd.
Date of Joining :- 14th Sep’2009 to Till Date
Designation :- JR .ENG.
Project :- Coal Handling System At NTPC Dadri Thermal Power Plant (U.P)
Stage-II (2X490MW)

Nature of Work :- Erection, Testing & Commissioning of
Material Handling Equipment like.
Conveyor system thermal power station part required in material handling plant. Crusher, Paddle Feeder, Track Hopper, Traveling Tripper, Stacker Recamier, Fluid Coupling, Scoop Coupling , Linear Actuator, Thruster Break, Gear Box, Drive & Non Drive pulley, ILMS, Suspended Magnet, Metal Detector , Belt scalier, Coal Sampling Unit & Belt jointing solution, RPG (Rack &Pinion Gate), Flap Gate, Sum Pump.
Following type machine equipment erection & maintenance work handling satisfactory my ability. machine all type lathe machine, drilling milling machine machine motor pump hydraulic pump.

Doing Planning and programming for site erection activities.
Co-ordination with vendors and agencies involved in erection activities.
Billing , BBU and protocol works.

[Guest]

CURRICULAM VITAE
SUNIL KUMAR
DIPLOMA (MECHANICAL ENGG.)
Email – skumar_mech05 AT sifymail.com
Sunil.kumar AT crescentpower.co.in
Applying for the post – Engineer , Sr. Engineer
Career Objective
To make life a continuous learning process by being amidst challenges and exert my resources of skill and creativity to wards the benefit of our organization and society and getting commensurate returns rise to principle of success while working in connection with my ideas of life.
Experience : 6Yrs. working experience in Thermal Power Plant.
CRESCENT POWER PLANT, 2x50MW (AFBC ) ASANSOL (W.B) RPG GROUP (CESC)
Role JR.OFFICER GR. II
Duration 10 March, 2010 to till date.
Responsibilities Day to day looking Opretion &Maintenance of , Seizers, Rotary Breaker,single roll & double roll crusher ImpecterCrushers,Vibro feeder, D.DScreens, Flip-flop screen,Conveyors, travling Trippers, DE&DS system Compressors and all Mechanical Equipment of Material Handling plant Contractor billing, Indent with ERP system, Planning and looking preventive maintenance and breakdown maintenance and record keeping.
IND SYNERGY LTD, RAIGARH (CG) 2x 50 MW (AFBC & W.H.R.B.)
Role Maintenance Egg.
Duration 20 Apl. 08 to 01 March, 2010
Responsibilities Day to day looking Maintenance of ESP -Boiler, feed pump, I.D., F.D.,P.A., C.W. system, CHP, Turbine Over houling &Auxiliary Maintenance.
2x125 MW AKRIMOTA THERMAL POWER STATION (G.M.D.C.,) Ketch (GUJARAT) CHP -600TPH
M/S TRF LTD. (A TATA ENTERPRISE) - on Contract basis
Role Engineer
Duration March 05 to feb 08
Responsibilities Erection ,Commissioning and day to day looking Maintenance of Seizers, Rotary Breaker, Impactors. Crushers, Compressors, Screens, Conveyors, Trippers, Stacker and all Mechanical Equipment of Material Handling Plant. Preplanning and looking preventive Maintenance and Break down maintenance.
Professional Qualification :
Examination University/Board Year of Passing Aggregate
Diploma in Mechanical Egg. RGPV, Bhopal Dec. 04 - Jan. 05 62.81%
Industrial Training :
Have taken one month’s industrial training from Vindhya Nagar Super Thermal Power Station, (NTPC) Singrauli (M.P.)
Job location ; Any where in India
Current Salary : 3.PA
Salary Expected negotiable
Notice period : One month

[Guest]

Dear Sir/Mam
I have completed my Company Secretary (C.S.) from the Institute of
Company Secretaries of India and currently pursuing LL.B. I will be
much pleased to work in a globally competitive environment on
challenging assignments that shall yield the twin benefits of the job
satisfaction and a steady-paced professional growth. Hereby I attach a
copy of my resume for your kind reference.

Expecting a favorable reply

Best regards
Vandana Singh

[Guest]

CURRICULAM - VITAE
1) NAME : PANKAJ BHARADWAJ
2) Profession : Mining Engineer
3) Designation : General Manager
4) Firm : D.B. POWER Ltd. Gurgaon
5) Experience : More than 24 yrs.

8) Qualifications :

- Academic : Bachelor of Engineering (Mining Engineer) from M.B.M. Engg. College Jodhpur, Rajasthan,India.
- professional : IInd Class Mine Manager`s Certificate of Competency (From DGMS,Dhanbad,India)

- Post Graduate Diploma in Sales & Marketing

- Gas Testing Certificate Holder.
9) Job Exposer & skill set :
- Worked as Mining Engineer in operational Mines of Coal India Ltd. In different Mining Statutory positions. Worked in Opencast Mine as well as Under ground mines & exposer of HEMM deployment & positioning at following position.
Period Designation Place of Posting Responsibility
1st June 2011-till date
Nov.2007-May 2011 General Manager
Associate General Manager, since 01.04.2010
D. B. Power. Ltd. 813, Phase-v, Udyog- Vihar , Gurgaon
Adani Mining Pvt. Ltd.
Plot no.83, Institutional Area, Sector-32, Gurgaon. All Mining & pre-Mining activities. (Mainly Environment & Forest matters), Q.E . /Half yearly reports to Coal controller/ CEA & MoC.
Technical assistance to CEO, Mining & Assisting in Environmental matters.
Sept. 2003 to Nov.2007
S.O.M.(S.G.)
RSO,CIL ,JAIPUR Realization of coal sales from RVUNL, legal matters, liasioning work with state govt.& Banks.
Jan.1995-Aug.2003
Sr. U/M (Spl.gr.)
RSO,CIL ,JAIPUR Realization of coal sales from RVUNL, legal matters, liasioning work with state govt.& Banks
Sept.1993-Jan.1995
Sr. U/M
Manikpur O/C Project,SECL Shift In-charge and Supervision of drilling , blasting &Production
July 1989-Aug.1993
Under Manager
-do-
-do-
June 1988- June 1889
Jr. Mining Engineer -do -do
May 1987 –May 1988
Jr.Mining Engineer(Trainee) Dhori Khas (UG) Colliery,C.C.L. Shift Incharge in Production.
- Presently working as General Manager, in DB Power Ltd.
- Working in development of green-field Projects.
- All pre-mining activities related to environment & forest clearances.
- Coordinating all technical matters related to govt. clearances for implementing coal mining projects.
- Preparation of Bid documents for domestic & international competitive bidding selection of JVP/MDO for coal mining.

- All pre-mining activities of Lohara projects, Parsa East & Kanta Basan / Machhakata /Chendipada coal projects i.e. Applying for prospecting License, Mining plan, Mining lease, Land acquisition, Environment-Forest clearances etc.
- 24 years experience of mining field, Regional office in Public sector as well as corporate working in Private Sectors.
- Languages- Very good speaking, reading & writing of Hindi, English.

[Guest]

SRINIVASULU.P
Education
B.E., (Electronics and Communication
Engineering)
N.B.K.R.Institute of Science and Technology,
Vidyanagar-524413.
Email
Srinu.14107 AT gmail.com
Programming
Languages Known
- Basics of C
- Basics of MATLAB
Strength
- Hard Working
- Team player
- Adaptability Career Objective
To be associated with a progressive organization that gives me scope to apply my knowledge and skills to be a part of the team that optimally works towards the growth of the organization.
Educational Profile
Course Institution Board Year of Passing Marks
%
B.E(ECE) N.B.K.R.Institute of Science and Technology, Vidyanagar S.V. University 2011 64.12
Intermediate V.R Junior college,venkatagiri Intermediate 2007 68.2
SSC G.G.H.School,venkatagiri State 2005 72.1



Field Of Interest
- Signal & Systems
Project Work
- This project titled “INDUSTRIAL ROBOTIC APPLICATIONS” was designed to facilitate the monitoring of the temperature, presence of poisonous gases and bombs in industries, airports and high security and safety zones. Here temperature is sensed using LM35 sensor and can be sensed from a distance. If any hazardous situation happens in a distance it can be sensed immediately in a distance and GSM module residing near the controller sends the data to the remote distance acknowledging what is happening near the industrial area.
Responsibility :
- . To Implement Sensor system.

Extra-Curriculum
- Active participant in Association activities at college level.
- Donated BLOOD in blood donation camp conducted by RED CROSS SOCIETY.
- Accolades
- Secured first prize in SYMPOSUM-09 conducted by S.R.K.R College BHIMAVARAM For model presentation on “COLLISION PREVENTION SYSTEM FOR VEHICLES USING ULTRASONIC SENSORS WITH MICROCONTROLLER”.
- Secured second prize in POTENZIA-09 conducted by M.G.I.T College Hyderabad for model presentation on “FIRE FIGHTING ROBOT”.

[Guest]

ROHIT MISHRA
E-Mail
mishrarohit.mishra10 AT gmail. com
Pastime
- Net -surfing
- Watching News Channel
- Reading Newspaper

CURRICULUM VITAE
OBJECTIVE
Aspiring towards challenging assignments in the field of electrical & electronics engineering with a reputed organization.
PROFESSIONAL ABRIDGMENT
- A skilled individual with keen interest in the field of Electrical & Electronics Engineering.
- Proficient in grasping new technical concepts and utilizing them in an effective manner.
- Strong technical, analytical, problem solving and organizational abilities.
- An effective communicator with excellent interpersonal and relationship building skills.
EDUCATIONAL CREDENTIALS
- Pursuing B. Tech. (Electrical & Electronics Engineering) from IIMT Engineering College, Meerut. Affiliated to U.P.T.U. Lucknow with 71.26%till 7th sem.
- Diploma in electrical engineering from HANDIA POLYTECHNIC ALLAHABAD Affiliated to B.T.E Lucknow with 78.59% in 2009.
- 10th from vidya sagar intermediate college with 73% (U.P. Board) 2006.
ACCOLADES
- NCC B & C certificate.
- Participated in college technical fest.
TECHNICAL SKILL SET
- Operating System WINDOW VISTA, WINDOW XP,WINDOW 7.
- Proficient in working on Microsoft office.
SEMINARS DELIVERED
- DC Chopper
PROJECT
Emergency light in polytechnic
Electricity generation from the busy road in B-tech
HOBBIES
- Internet surfing.
- Playing cricket.

SUMMER TRAINING ATTENDED
In Diploma : JAL SANSTHAN ALLAHABAD (two weeks)
In B.tech :
Company : BHARAT HEAVY ELECRTICAL LIMITED, VARANASI
Title : Work on CNC
Duration : Four Weeks
Date :
Place : Meerut – 250001
ROHIT MISHRA

[Guest]

Do you have vacancy for the post of Manager P&A at your company?