TEBODIN MUKESH Consultants Chennai Abu Dhabi UAE : Mechanical/Piping

[Admin]

TEBORedUKESH Consultants & Engineers India Pvt. Ltd. Chennai, : Senior Design Engineer- Mechanical/Piping
Website: http://www.tebodin.com

Keywords: Senior design engineer, Project manager, Piping engineer, Mechanical engineer

Designation: Senior Design Engineer- Mechanical/Piping
Experience: 8 - 13 Years
Location: Chennai,
Abu Dhabi UAE
Compensation:
Best in the industry for the deserving candidate.
Education:
UG - B.Tech/B.E. - Any Specialization
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 31 Mar 2009

Job Description:
1. Prepare Mechanical and piping Specifications, designs including calculations, stress analysis
2. Coordinate with clients and vendors
3. Manage and control project related activities with other disciplines
4. Prepare Bill of Quantities and manhour

Desired Candidate Profile:
1. Engineering Graduate and knowledge in mechanical and piping design works
2. Min 5 years exp with Oil/Gas related engineering consultancy company
3. Knowledge of latest software for piping and international standards
4. Good communication skills

Company Profile:
Tebodin founded in 1945 in The Hague, the Netherlands having 3,000 employees worldwide and with more than 40 offices in 20 countries. Tebodin is involved in many prestigious projects worldwide with a total investment value of EUR 4 billion.

Address: Not Mentioned

Email Address: tksudhee@tebodinme.ae

Telephone: Not Mentioned

Keywords: Senior design engineer, Project manager, Piping engineer, Mechanical engineer

[Guest]

CURRICULUM VITAE
SERMAMANIRAJ.T
2/21,Valasakkaran villai,
Sawyerpuram.-628 251
Tuticorin Dist.
Tamil Nadu.
E-mail: maniraj4christ AT yahoo.com
Mob : +91-9976 332267
________________________________________ CAREER OBJECTIVE:
To work sincerely to achieve the Dream of your company by utilizing my skills, knowledge, hard work and enhance my technical skills through the experience in your organization.

EDUCATIONAL QUALIFICATIONS:

Course Board/ University Institution Year of Passing Marks obtained(%)
B.E
(MECH.) Anna University Government College Of Engineering, Tirunelveli. 2009
75.03

HSC State Board Pope Memorial Higher Secondary School, Sawyerpuram. 2005 90.333
SSLC State Board Pope Memorial Higher Secondary School, Sawyerpuram. 2003 91.200


PROJECT- I
Title : Automatic Moisture & Light control system.
Description:This Project achieves the Automation in irrigation system of gardens . & agriculture fields using Micro controller
PROJECT-II:
Title : Two Speed Gear Box
Description : This Project demonstrates the Design and Fabrication of Two speed
gear box .
Type : Sliding mesh type.

.
FIELD OF INTEREST:
- Internal Combustion Engines.
- Gears
SOFTWARE SKILLS:
- Drafting package : AutoCAD 2007.
- Modeling package : 1) Solid edge V19.
2) Ansys V10.0

EXTRA-CURRICULAR & CO-CURRICULAR ACTIVITIES:
- Underwent a Training Course of “Coordinate Measuring Machine” .
- Underwent a Inplant Training at Tamilnadu State Transport Corporation Ltd.
- Participated a Energy Conservation programme DOFC, Govt. of India.
- Industrial Visit Representative of the class.
- Member of ISTE.
- Participated in the awareness programmes conducted by Red Ribbon Club.

SIGNIFICANT ACHIVEMENTS:
- Secured School first in HSC Examinations.
- Secured Centum in SSLC Science subject.
- Done the Automated Irrigation System Project newly.

PERSONAL PROFILE:
Name : SERMAMANIRAJ.T
Father’s name : A.Thangavel.
Sex : Male.
Date of Birth : 22.02.1988
Nationality : Indian.
Languages known : English, Tamil.
Hobbies : Solving Su-du-ku, listening to Music
DECLARATION:
I hereby declare that all the particulars mentioned above are true to the best of my knowledge and belief.
Place:Tuticorin.
Date: 31.07.09 SERMAMANIRAJ.T

[Guest]

pleasa mail me current requirements in piping .......... i am a piping engr my e mail id :shahulshs@yahoo.co.in
mobile:09526744871

[Guest]

CURICULAM VITAE
G.Prasanna Venkat Ramanan
Prasanna.june14 AT gmail.com

Objective

A position as a Systems Analyst that utilizes my knowledge and experience and provides me with versatile and challenging responsibilities.
System Administrator
Duties Performed :
- Installed software, upgrading, and maintenance of operating system.
- Installed, upgraded, and maintained server hardware components as per requirement.
- Installed complex hardware and software and upgrades to ensure work is performed as per the company policy.
- Support MT’s and QA are in lab session.
- Configuration and troubleshooting of outlook, outlook express and Internet related problems
Skills/Abilities/Knowledge :
- Good knowledge of hardware information such as CPU, Memory, Disk, Network, Bios.
- Have good experience as Windows System Administrator.
- In Operating System Windows 98, Win XP, Windows 2003 Server, & Ms- DOS.
- Designing Level Adobe Photoshop, Page Maker & Instant Artist, and Corel Draw.
Skills :
- Installation of the software and hardware.
- Rectifying the monitor video graphics card,
- Resolving computer related problems.
- Maintenance and repair of networks.
- Network Troubleshooting.
Personal Details :
Name : G.Prasanna Venkat ramanan
Date of Birth : 14-06-1984
Father’s Name : D.Gopala Krishnan
Qualification : MSE, DHNE, PGDCA, CCNA, MCSE. BCA
Professional Experience :
System Administrator
Meglio Technologies Pvt Ltd., 2008 – present.
- Maintaining all systems and Network Installing Windows XP with user security and installing needed software for all MT’s and QA’s.
- Installed software, upgrading, and maintenance of operating system.
- OS Installation/Configurations of Windows 9x/XP/2K/2003, Vista, Fedora, Ubuntu.
- Configuration and troubleshooting of outlook, outlook express and Internet related problems.
- Maintenance of Medical Transcription Unit by giving system support and medical Transcription software support and also interact with end users.
- Active Directory users and groups management.
- Implementation and administration of DNS, DHCP.
- Remote Administration using terminal service, VNC, PCAnywhere and Dam ware
System Service Engineer
Argosy an Info Tech (P) Ltd, 2006-2008
- Responsible for providing the desktop system administration and support to the network.
- Interact with the clients to resolve the queries, issues, and problems.
- Responsible for providing help, support and assistance in initial installation of the system, setup, and maintenance of the user account, data recovery, etc.
System Service Engineer
Sri Devi Computers, Sankagiri. 2003-2006
- Assembling. & creating Partitions on the Hard disk(s).
- Installing Operating System (Microsoft) on the Computer.
- Installing various Application Software and Assigning User rights.
- Internet Protocol (IP) address configuration and DHCP based IP Address Configuration.
- Managing Server and assigning the user rights for the Client computers.
- Internet Connection Sharing (ICS) from Server to Clients.
- Customer Support and Troubleshooting with Operating System.


Date : Truly Yours


Place : Sankagiri (G.PRASANNA VENKAT RAMANAN)

[er.gagandeep.6095@gmail.com]

Dr sir i am Gagandeep Singh as an Mechanical Engg. (spl. in welding tech.) From SLIET longowal sending you my cv
GAGANDEEP SINGH
E-mail : er.gagandeep.6095 AT gmail.com
Branch :Mechanical Engg.(with spl. In Welding Technology)
Mobile no :

ADDRESS FOR CORRESPONDANCE PERMANENT ADDRESS
T/well Division P.S.T.C ltd P.S.T.C coloney opp. Govt. college Malerkotla
Sangrur-148023
Punjab. T/well Division P.S.T.C ltd P.S.T.C coloney opp. Govt. college Malerkotla
Dist. Sangrur
Punjab

CAREER OBJECTIVE
To produce fruitful output with the available resources by giving sincere efforts and dedication to the allocated assignment.
EDUCATIONAL PROFILE

Course
Institution
University/
Board
Year of passing
% Marks
B. E.(Mechanical Engineering)
(Spl. in welding Tech.) SLIET
PTU
2009
63
Diploma Mech. Engg.
(Spl. in foundry tech.) SLIET
SLIET
2006
67.45
Certificate Mech. Engg.
(Spl. in Tool and die) SLIET SLIET
2004 63
Matriculation
M.M.High school
Malerkotla P.S.E.B 2002 63
INDUSTRIAL EXP.
One Year Exp. With NEW SWAN ENTERPRISES UNIT- 2 IN LUDIAHNA as PRODUCTION ENGG.
CUREENT CTC.
1000 Cash in hand.
JOB PROFILE.
1.Look after complete fabrication section.
2. Allocation and handling of manpower.
3. Development of new welding fixtures.
4. Improvement in existing welding fixtures for better quality and production targets.
5. Handling customer complaints for welded assemblies.
6. To perform various destructive and non destructive tests.
7. To look for process and product audit
8. To perform kaizens through innovative ideas.
9. To perform 5 s and other activities.
INDUSTRIAL TRAINING.
1. 7 QC TOOLS
2. 5 S
3. ISO 9001 :2009
4. TS (TECH. SPECIFICATION)
COMPUTING SKILLS
Auto CAD
Fanuc/CAD-CAM
Windows Office
INDUSTRIAL TRAINING
6 Weeks Training with Punjab Tractor Ltd. Mohali, punjab
6 Weeks Training with Mechin Cad Technologies. Chandigarh
6 Weeks Training with Goetze India Ltd. Patiala. punjab
12 Weeks Training with Goetze India Ltd. Patiala.
PROJECT UNDERTAKEN
Project on Developing casting procedure
Project on W.P.S (welding procedure specification)
AREAS OF INTEREST
Welding (Fabrication)
Foundry


SPECIAL ACHIVEMENT
2nd Prize in Group Discussion organized by Society of Instrumentation Technocrats SLIET, Longowal.
1st prize in General Awareness Quiz organized by Health Club, SLIET, Longowal.

EXTRA CIRRICULUM ACTIVITIS
Joint Secretary of CRISIS MGMT. Committee in Techfest 2008
Convenor of CRISIS MGMT. Committee in Techfest 2009
Participated in Prastuti ( Paper Presentation) organized by Mechanical Engg. Society, SLIET.
PERSONALITY TRAITS
Learning Attitude
Negotiator
Leadership
Situational worker
Team working ability
HOBBIES/ SPARE TIME ACTIVITIES
Playing cricket
Yoga and meditation
Plantation
Internet surfing

[Guest]

sir this s ashok jayaraman, now im finished my mba and searching for the job can u refer me.

[Guest]

BALAKRISHNAN K
E-Mail : kbkrishnan87 AT gmail.com

OBJECTIVE :
To work with an organization that provides me with a challenging environment and ample opportunities to improve my professional, innovative and practical skills, to enjoy the spirit of team work for the upliftment of the organization
EXPERIENCE :
Employer : Inovonz Engineering Pvt Ltd, Chennai, India
Position held : Site incharge (Erection and Commissioning Engineer)
From : May 2010 - to till date
Project : Abhijeet Infra Ltd (4 X 61.5 MW) Thermal Power Project, Mihan . Power Plant, Nagpur, Maharashtra
BOILER MAKE : WUXI, CHINA
TURBINE MAKE : DONGFANG, CHINA
Duties and Responsibilities :
· Project management and Supervising the Erection and Commissioning of total Control & Instrumentation jobs in (4 X 61.5 MW) Thermal Power Project.
· Preparation of site-specific procedures for control & instrumentation activities.
· Preparing work schedule, Allotting daily work to the workers and complete the work with target time.
· Review the cable wiring diagrams, hook up diagrams.
· Impulse line slope as per document.
· Preparing cable termination schedule from the I/O list.
· Loop checking of all digital & analog I/O for HONEYWELL DCS system.
· Maintaining cable termination schedule.
· Commissioning and Troubleshooting field instruments like Transmitters, Temperature Element, Switches, Control Valves, MOV’S, SPM analyzer,O2 analyzer
· Material purchase
· Maintaining site Account and Expansion
· Preparing BOQ and Invoice for the carried work

Familiar In :
· Hook-up drawings
· P & I Drawings, Data Sheets, GA drawing
· Calibration of Yokogawa made Transmitters (Pressure, Flow, Level, and Temp).
· Attending for DCS/PLC Loop configuration, HONEYWELL DCS system.
· Commissioning all Digital and Analog signal instruments.
· Troubleshooting field instruments like Transmitters, Temperature Element, Switches.
· Commissioning field instruments like Transmitters, Temperature Element, Switches.
· Loop checking and Commissioning Control Valves, rotork & CHINA MOV’S
· Industrial Parameters Measurement (Pressure, Temp, Flow, Level)
PREVIOUS WORK EXPERIENCE :
· One Year part time Operation and Maintenance Experience in ‘Wind Care’ (a contract for vestas) Ayikudy from 2006 to 2007.
· One Year technician Experience in ‘Geo Basic Surveys’ at Bangalore from 2004 to 2005.
EDUCATIONAL QUALIFICATION :
BE (Electronics and Instrumentation Engineering) from Vel Tech Engg college, Chennai
Anna University, Chennai (2010 Passed Out) 73.17 %
Diploma (Electronics and Communication Engineering) from M.S.P.V.L polytechnic college
DOTE University, Chennai (2007 Passed out) 91.23 %
PROJECTS EXECUTED :
Title : Boiler Automation Using PLC, Organization: BHEL at Tiruchy
The project’s main aim is safe start up, safe running and safe shutdown of boiler. PLC use control and monitors the presence (or)absence of the FD & ID fan, airflow, water level in boiler dram, and verifies the least one flame in the furnace if any one absence the bailer will trip.
CERTIFIED COURSES :
· ‘Industrial Control Automation’ (PLC, SCADA, DCS) course from MSME-Chennai
· ‘Computer Hardware Servicing and Networking’ training from Mega Soft Computer
SOFTWARE SKILLS :
· MS-office, Windows XP, 98.
· Language Basic of C, C++
· Basic knowledge in INTOOLS and PLC Programming
EXTRA CURRICULAR ACTIVITIES AND ACHIEVEMENTS :
· Won the prize for paper presentation on the topic ‘Smart sensor’ at INSTRUBLITZ ’09
· Winner of arts competition in my school for four years in a row
· Coordinator - Creativity team in VEL INSFIRE’09 a National level technical symposium
· Participated in ‘Six sigma’ certificate program from MSME-DI, Chennai
· NCC ‘B’ Certificate Cadet.
PERSONAL STRENGTHS :
· Hard working and committed
· Takes initiative and work individually or as a group
· Good physical and mental health

[Guest]

RESUME

SUMAN SHANKAR M
Piping Engineer
E-mail : sumanshankar15 AT gmail.com

Objective :
Seeking a position as a Piping Designer where I can apply my skills and knowledge in the field towards the growth and development of the organization.

Technical proficiency :
Certified Course in Master Diploma in Mechanical CADD from Cadd Center Chennai.

Technical Skill :
- Layout Activities :
- Preparation of Bulk Material Take Off (MTO) from P&ID's and equipment layouts.
- Preparation of Isometric Drawings with Bill Of Material from Piping GAD
.
- Material Activities :
- Various Calculations as per ASME 31.3 like Thickness calculations of pipe.
- Preparation of piping Specifications as per process data.

Academic profile :

- B.E. [MECHANICAL] : -From Anna University, Chennai in May 2010 Securing First Class with 72% in aggregate.
- H.S.C. : - From Tamil Nadu State Board in March 2006, Securing First Class with 60% in aggregate.
- S.S.C. : - From Tamil Nadu Board in March 2004, Securing First Class with 70% in aggregate.
Technical expertise :
- Smart Plant 3D
- Smart Plant PID [SP P&ID]
- Familiar with AUTOCAD, CATIA V5 R16,UniGraphics Nx6.
- MS-Office, Windows.
- MSP
Industrial training :
- Underwent an implant training in Ashok Leyland, Chennai.
Project during academics :
- Title : Engine Subline And Engine Docking Area Merging [HYUNDAI]
- Title : Welding Distortion Control in Bogie Frame Assembly [ICF]
Professional Experience : (Total experience in piping: 1+ yrs)
ALPAN Engineering Consultants, Chennai. 2010 to till date
Role : Piping Designer
Job Responsibilities :
- Generating P&Id’S.
- Extracting Reports From P&ID.
- Checking of Material Take Off (MTO) with P& ID and layout.
- Handled the tasks of collecting information, performing calculations, preparing sketches and original rough layouts to present design proposal
- Responsible for providing solutions to different complex problems under general direction
- Assigned the tasks of determining and developing approaches to solutions
- Handled the responsibilities of designing portions or system components as well as modifies existing designs
- Responsible for providing feedback on status and man-hours
- Coordinated design criteria with engineering and planning group in accordance with the contractual specifications
- Preparation and Updating of Material control chart for Project.
Project Handling :
- Offshore associated gases Abudhabi gas industries (GASCO)
Area of interest :
- To gain a complete knowledge and application of technical principles, theories and concepts in the concerned field
- To contribute my best to meet the goals and objectives of the organization
Capability :
- Team Managing
- Quick Learning

[Guest]

i am looking for job in mechanical industries.plz help me out on dis.......my no is

[Guest]

CURRICULUM VITAE
PANKAJ DESHMUKH
pankaj.s.deshmukh AT gmail.com
Career Objective :
To secure a challenging position where I can effectively contribute my skills as Piping Engineer, possessing competent Technical Skills.
Professional Summary :
- Piping Engineer with over 5 years of experience in Piping Design & Detailed engineering with the extensive work as Piping Engineer in the field of Process & Power plants design.
- Experience in Piping Lay outing in 3D environment using Intergraph’s Plant Design System ( PDS Ver. 7.2, 7.3 & SP3D)
- Hands on experience in study of Plot plan, Equipment Layout, P & ID, and Client Information.
- Pipeline routing from studied drawings & documents.
- Preparing Material take off requirements and isometric drawings for construction in PDS 3D.
- Performing Manual Bulk MTO & rough isometric sketches of layout for estimation.
- Known to international Codes & Standards for different piping commodities. (ASME, ASTM, API).
- Pump Piping (Suction, Discharge), Air cooler piping, PSV piping.
- Piping & Planning of Buried Underground Piping.
- Oily Water Sewer typical connections, Manhole & Cleanout Inlet Outlet piping length calculations.
- Experience in underground Firewater piping planning, locating firewater monitor, double hydrant valve, LRWM, etc.
- Experienced in Equipment checking, nozzle orientation checking.
- Known calculations to determine pipe wall thickness & ratings.
- Trained in Intergraph’s Smart plant 3D (SP3D), and Naviswork Jet stream (Review Software) on job training.
- Highly experienced in navigating Smart plant Review (SPR) for model walkthrough
Technical Skills :
- 3D Layout Tools : Intergraph’s Plant design system (PDS) ver. 7.2/7.3
Trained in Aviva’s PDMS 11.6 SP4
On job training in SP3D
- 2D Tools : AutoCAD 2006
Bentley Microstation V8
Intergraph’s Smart Plant P & ID.
- Review : Intergraph’s Smart Plant Review (SPR)
Naviswork Jet stream Ver. 5.8
- Other : MS Office (Word, Excel, Power point), Windows 98/XP
Work Experience :
Toyo Engineering India Ltd, Mumbai, India. March 2008-Till Date
An engineering consultancy providing its core competent technical skills in the field of Piping Design and Overall Detailed engineering for EPC, EPCC, EPCM, LSTK projects in India & Abroad.
Position : Area Engineer
Projects :
1) Diesel hydro treating Unit, HPCL Refinery Mahul, India. LSTK Project for Piping Design and overall detailed engg.
Position – Area Engineer (PDS 7.3)
2) Kazstroy Sulphur Recovery Unit, HPCL- Mittal Energy Ltd., Bathinda Refinery. EPC project for piping design and overall detailed engineering.
Position – Assistant Area Engineer (PDS 7.3)
3) IOCL Panipat Refinery DEMO project for live training of SP3D.
4) IOCL Panipat Motor Spirit quality up gradation project. Revamping project.
5) AUM Complex, Trinidad & Tobago. Urea Plant piping design & overall detailed engineering EPC project.
Scope of Work :
- Piping routing from study of Plot Plan, P & ID, Equipment layout, Vendor doc, Civil drawings for structure, equipment foundations, roads, hardstand, hydra movement etc.
- Review the plant 3D model from design, accessibility, maintainability aspects using Smart Plant Review.
- Preparation of Civil information, Mechanical information.
- Coordinating with various other departments for ID (Inter Disciplinary) checks like civil, instrumentation, electrical, mechanical, process.
- Checking of isometrics w.r.t. P & ID, Equipment drawing and model review for clashes.
- Selection of pipe supports using stress analysis report of CEASAR II
- Clash resolution.
- Nozzle orientation, platform arrangement according to maintenance & accessibility.
- In project KSRU handled Underground piping area.
- Oily water sewer manhole location planning, Lay outing all the underground networks of sloped piping considering depth provided.
- Complete modeling of underground sloped piping, manhole seal connections, dummy manholes cleanouts etc.
- Manhole & Cleanout inlet outlet piping length calculations.
- Underground fire water piping lay outing, Arrangement of hydrant, water monitor, post indicator valve, fire hose reel, direct buried valve, safety shower, etc.
- Attain 30%, 60%, 90% client review comments.
- Continuously updated project drawings & documents in 3D model to final as built.
Rolta India Ltd, Mumbai, India. June 2006-March 2008
An engineering consultancy providing Engineering Design & Automation solutions for various types of projects in India & Abroad.
Position : Executive L II
Projects :
1) SHARQ Third expansion of Ethylene plant, Jubail Industrial city, Saudi Arabia.
Position – PDS piping Designer (PDS 7.3)
2) HDPE Yanbu – Yansab Industrial city, Saudi Arabia.
Position – PDS piping Designer (PDS 7.2)
Scope of Work :
- Complete modeling of designated area in PDS 3D including piping modeling, equipment modeling, modeling of platform, ladder, staircase, dummy structure, maintenance envelopes, access area for operator, dropout area, davit, etc.
- Isometric extraction using isometric drawing manager.
- Piping routing & modeling using G. A. drawings.
- Selection of support using stress report from CEASAR II & modeling of supports.
- Tags killing of 30%, 60%, 90% Client & Internal review.
- RDB updating in model as per schedule.
- Data integrity check and resolution.
- Clash check and resolution of clashes by coordinating with other area modelers.
- Developed Tank Farm lay out.
- Prepare, generate & check piping isometrics & MTO.
- Performed manual valve MTO from P & ID.
- Performed manual bulk MTO from rough sketches of lay out drawn by designer.
Education :
Bachelor of Technology in Chemical Engineering, U.D.C.T., Maharashtra, India.

[Guest]

I AM INTERESTED TO WORK IN OUR ORGANIZATION AND SO I HAVE APPLIED FOR THE JOB.

[Guest]

Madam/Sir,
I have 7 years of Gulf Experience in U.A.E in light Vehicle. Now i am in chennai .
If u have any opening please contact me : raajr20 AT gmail.com .
Thanking you
Anand Raj.