www.viraj.com Profiles Ltd Mumbai : Chemist

[Rajkumargautam]

Viraj Group Mumbai Suburbs : Chemist

Designation: Chemist
Experience: 2 - 4 Years
Location: Mumbai Suburbs

Job Description:
Responsible for Testing

Desired Candidate Profile:
should have2-3 Years of experience as chemist in Manufacturing Industry

Company Profile:
Viraj Profiles Limited is an Export oriented company, manufacturing Stainless Steel Engineering Products and is exporting it to over 90 countries. It diverse quality products include Flanges, Bright Bars, Angles, Flat Bars, Channels, Beams, Wires, Wire Rods and Fasteners. The manufacturing Facilities and its offices are located in MIDC, Industrial Area, Tarapur. (Maharashtra)

Email Address: prashant@viraj.com
Website: http://www.viraj.com

Keywords: chemist

[Guest-IJT]

SONAWANE DATTU CHNDRABHAN

Email ID :-dattu.sonawane AT rediffmail.com

Education Profile
S.
No. Name of Course School/College University Year of Passing Percentage

1 D.M.E. K.K.W. Polytechnic, Nashik B.T.E. Sum 2005 60.77 %
2 D.P.T. S.H.H.J.B. Polytechnic, Chandwad B.T.E. Sum 2003 57.27 %
3 H.S.C. Mahadavrao Boraste Mahavidyalaya, Ozar Nashik March 1998 60.00 %
4 S.S.C G.E.S.H.A.L.High School, Ozar Township Nashik March 1996 52.80 %
Employment History

Current Experience
Company Name :- Aditya Birla Health Services Ltd.
Position Level :- Maintenance & Utility Engineer
Current salary : 3 lac per annul.
Notice period :- one month

Previous Experience
Company Name :- Emcure Pharmaceutical Ltd.
Position Level :- Maintenance & Utility Engineer
Date of join :-11/08/2009 up to 1/04 2010
Previous Experience
Company Name :- Cipla Ltd.
Position Level :- Maintenance & Utility Engineer
Date of Join :-1 /1/2006 up to 15/11/2008 till date
Company Profile
Cipla Ltd. Is a manufacturing of largest pharmaceutical and bulk drug production. The company imports its finished products to all over companies it is also to scientific division safety and environment division in USFDA ,ISO, MHRA, WHO and British safety council.
Job Profile
Build up knowledge of pharmaceutical / health care engineering maintenance for all the three wing of technical division (Mechanical, Electrical, Civil) with cost control and management.
1. Maintenance & installation of different types of pumps
2. Good knowledge and maintenance of reciprocating and screw compressor.
3. Good knowledge and maintenance of pneumatic machine.
4. Good knowledge and operation of ETP / STP plant.
5. Good knowledge of water & brine chilling plant
6. Operation and maintenance of vacuum pump and steam jet ejector
7. Good knowledge and maintenance of industrial purified water system
8. Good knowledge and maintenance of utility air compressor, Boiler, Thermopack & Nitrogen plant
9. Good knowledge and maintenance of Heating Ventilation and Air conditioning system (HVAC)
10. Good knowledge and Maintenance of BMS system.
11. Knowledge of process cooling towers & Hot water generation system.
12. Knowledge of different types of valve.
13. Maintenance of equipment Such as, S. S. Reactor, Glass lined Reactor, Centrifuge, Fluid Bed dryer, RCVD, Blender, Sifter, VTD, sifter, stirrer, and sizonar. Compression m/c, packing m/c multimill, cadmill, jetmill.
14. Knowledge of Hydraulic System.
15. Good knowledge and Maintenance of Medical gas system.
16. Preparation of documents, such as DQ, IQ, OQ, PQ, Validation and maintenance schedule and Audit.
Responsibilities
1) Responsibilities for entire maintenance activities of Engineering Department.
2) Plan preventive maintenance AMC/ new equipment.
3) Preparing layout of new project and co-ordinate with contractors for negotiation, order & execution.
4) Plan and implementations of cost control policy.
5) Contribution to plant appearance safety by executing all maintenance activities

Previous Experience
- Company Name :-Samsonite South Asia Pvt. Ltd.
- Position Level :- Working as an operating trainee in production
( Injection Moulding) Department.
- Date of Join :- 28th March 2004
- Date of Left :- 28th December 2005
Company Profile
Samsonite South Asia Pvt. Ltd. Is multinational company, manufacturing travel accessories. The Company imports its finished products to Europe, US, Latin America etc.
Job Profile
Operating on PLC Injection molding machines and vaccum forming machines which produce plastic components like shells housings, seats etc.
Extra responsibility to maintain quality of the molding items by setting proper cycle time, involvement in the process of mould change, machine setting, colour changes etc.
Academic Project :
D.P.T. Project :-
Title :- Design of ultimate tensile stress testing machine.
This type of unit is designed to test the UTS of different components like,
copper, aluminium etc.
D.M.E.Project
Title :-Design and manufacture of automatic gear and breaking system and digital indicating.

Personal Strength
Hardworking, Good Team Player, Good Cens. Skill, Leadership quality, Highly Motivated Sincere, Learner and Initiator.
Reference :-
1) Sanjay Lonkar (Sr. Manager Engineering Aditya Birla Health services Ltd. Pune. ) -9881123070
2) Mangle S. ( Manager in Utility section SPD division Emcure Ltd. Pune )
9371160338.

Place :-

Date : - / / D.C. Sonawane

[Guest]

CURRICULUM VITAE
kansabanik_soma AT rediffmail.com
parali.soma AT gmail.com

SOMA PARALI
Objective :
Intend to build career with leading corporate of excellent work environment, which will help me to explore myself by giving opportunity of learning and personal growth to enable me to actualize my potential. Willing to work as a key player in creative environment.
Professional Experience :
Job Title : Four years of professional experience in Chemical analysis of industrial samples.
Brief description of work :
- Testing of iron ore sample : Fe, Si, Alumina, moisture, CaO etc.
- Testing of drinking water sample : pH, conductivity, turbidity, odor, hardness, Ca, Mg, Cl, So4, Sio2, Fe, PO4, TDS, Alkalinity, FRC, SO3, CO2, carbonate, bicarbonate etc
- Testing of effluent water sample : pH, TSS, COD, BOD O&G, T-Cr, DO, F, PO4, Sludge volume, Phenol, NO3, MLSS etc
- Testing of construction water sample : pH, Cl, SO4, Organic and inorganic matter, TSS, H2SO4 required to neutralize 100 ml of water using methyl orange indicator, NaOH required to neutralize 100 ml of water using phenolphthalein indicator.
- Testing of coal sample : Total moisture, inherent moisture, surface moisture, ash content, VM, UHV, GCV, LOI, fixed carbon, Fe & S content etc
- Testing of fertilizer sample : Moisture, total P2O5, water soluble P2O5, sulphur content, Kjeldalh N2 etc
- Testing of admixture sample : Sp gravity, pH, Cl, Moisture, dry material content, ash content etc
- Testing of soil sample : pH, Cl, SO4, PO4, Mg, Fe, Reactive SiO2, Oil content, Fe etc
- Testing of metal : M, Cr, Ni, Mo, P, Sio2 etc
- Testing of air sample : SO2(ambient), NOX(ambient), SO2(stack), etc
- Testing of acid sample : Purity of H2SO4, purity of H3PO4, HCl, P2O5 of H3 PO4, SO3 of H3 PO4
- Testing of oil sample : Density, Sp gravity, viscosity, free acid, sludge content, saponification value, iodine value, acid value, moisture, melting point etc.
Instruments used in chemical labs are
Digital balance, pH meter, conductivity meter, turbidity meter, single beam spectrophotometer, UV visible spectrophotometer, melting point apparatus, viscosity meter, water bath, Soxhlet apparatus, Nitrogen apparatus, COD apparatus, double distilled water apparatus, single distilled water apparatus, muffle furnace, hot air oven, BOD incubator, TSS apparatus, Dean and stark moisture apparatus, Hygrometer, Hydrometer, Hot plate, heater, Desiccators, Heating mantel, Suction pump.
Employment Record :
Company name and address Omega Consultant Services,
E-block, Durgachak, Haldia, Purba Medinipur Indicative Consultant India
Basudevpur, HPL link road, Haldia, Purba Medinipur
Duration of work Jan 2007 to Feb 2008 March 2008 to Feb 2011 last
Employer Arun Kr Das(Technical director) Jayanta Sarkar(Director)
Position held Chemist Sr Chemist
Educational Qualification :
Professional Qualification :
Degree Course
Board/ University
Year Of Passing
% obtained
Grade
M Sc in Chemistry
Vinayaka Missions University, TN
2009

73.5
1st
B Sc in Chemistry
Vidyasagar University
2005
51.13
2nd
Academic Qualification :
Exams School/ Board Year Of Passing % Obtained Division
Higher Secondary
W.B.C.H.S.E. 2001 64.9 1st
Secondary
W.B.B.S.E. 1999 78.9 1st
IT Exposure :

Operating Systems : MS DOS, MS OFFICE, WINDOWS,
Windows XP, Fundamentals, internet.

[Guest]

CURRICULUM VITAE
PRADIPTA KUMAR DASH
E-mail :- pradeep.dash2010 AT gmail.com
Post Applied For : Analytical Chemist
CAREER OBJECTIVE
With the motivation and goal I am keen in innovative new ideas to achieve the millstones. To be a part of an organization that allows me to explore and bring out the talents inherent in me and help me to learn a lot in the process.
ACADEMICAL QUALIFICATION
- Matriculation passes from B.S.E Orissa in the year 2001.
- Intermediate (PCMB) from C.H.S.E Orissa in the year 2003.
- Graduation (PCMB) from Utkal University Orissa in the year 2006 with Distinction.
- P.G.D.C.A (‘O’ level) Computer Course Under Utkal University at Kasinath Mohavidyalaya, Kaipara, Jajapur, Orissa.
PERSONAL EXPERIENCE
- Worked as Trainee Chemist in Superintendence Company of India Pvt Ltd, at Nalda, Keonjhar, Orissa, from 11th Oct. 2006 to 10th Sep.2007.
- Worked as Chemist Bhubaneswar Central Lab (NABL Accredited) of Inspectorate Griffith India Pvt Ltd., from 1st Oct. 2007 to 4th March 2010.
- Worked as Chemist at NTPC (UP), Vedanta Power Ltd (Rajasthan), and Bhusan Steel & Power Ltd, under Inspectorate Griffith India Pvt Ltd.
- Worked as Chemist in SPS Steel & Power Ltd, Jharsuguda, Orissa, (MBF, Silico Manganese & SMS).
- Worked as Sr.Chemist in Bhushan Steel Ltd, Meramundali, Dhenkanal, under Spectro Analytical Labs Ltd, Joining in 07th March 2010 to 26th April 2011 in SINTER PLANT & BLAST FURNACE & COKEOVEN.
- Now working as a Sr Executive- Chemist in Abhijeet Group of Company at Napur
- Total Experience : 5 years & continue.
JOB RESPONSIBILITY
Independently handle the Laboratory, Setting the new Chemical Laboratory, Prepare Chemical Analysis & Report.
SMS
- All the Chemical and Physical analysis of Billets.
- All incoming Raw materials of SMS.
o Silico manganese,
o Pig iron,
o Sponge iron,
o Ferro silicon,
o Ramming mass,
o Molasses,
o Sodium silicates,
o CPC & MET COKE
o Caster and Rapids oil
o Ferrochrome
o Ferromanganese
BLAST FURNACE
- Slag and Metal analysis of BLAST FURNACE.
- All incoming raw materials of BLAST FURNACE
1. Iron Ore,
2. Manganese Ore,
3. Quartzite,
4. Coal and Coke,
5. Sinter,
6. Pellets,
7. Limestone,
8. Dolomite,
9. Hydrated Lime
10. Gas Analysis
SILICO MANGANESE PLANT
- Raw materials of Silico Manganese Slag and Metal analysis of Silco Manganese.
- All incoming
1. Ferromanganese Slag,
2. Iron Ore,
3. Manganese Ore
4. Quartzite
5. Coal and Coke
6. Limestone
7. Dolomite
AGGLOMERATION PLANT
(SINTER PLANT)
- Sinter analysis.
- T I and AI of Sinter.
- All incoming raw materials of Sinter plant.
1. Iron Ore Fines,
2. Silica Sand,
3. Limestone and Dolomite,
4. Coke Breeze,
5. RI & RDI,
6. Esp. Dust
7. Mill Scale
COKE OVEN
- Analysis of coke & Coal.
1. Proximate Analysis (IM, VM, ASH).
2. GCV
3. CHN & S
INSTRUMENT HANDEL
- Or sat for Gas analysis.
- Strohleien for Carbon.
- Distillation Unit.
- PH Meter.
- Leco 350, 500, Digital Bomb calorimeter for GCV.
- Truspec CHN & S.
- XRF (Bruker, S2 Ranger).
- RI & RDI
- Vibratorycopmill for samples preparation (INSMART SYSTEM).
- Moisture Analyzer.
- Flame photo meter.

[Guest]

CURRICULUM VITAE
NAVNEET KAPOOR

CAREER OBJECTIVE :
* A challenging job with opportunity to rise and grow, job should also provide a responsibility and conduct for development of personality. As I am extrovert in nature I'll try to prove myself best in field.
EDUCATIONAL QUALIFICATION :
* High school from U.P. Board.(2002)
* Intermediate from U.P. Board.(2004)
* I.T.I Diploma(COMPUTER) .(2004-2005).
* Graduation B.Sc. (P.C.M.) from Lucknow University.(2007-2010)
EXTRA CURRICULUM ACTIVITIES :-
- KNOWLEDGE OF MS-OFFICE, D.T.P.,Hardware & Networking.
- Manual Accounting with Computerized Accounting(tally 4.5,5.4,6.3,7.2,9.0).