Gulf SPIC Kuwait : PIPING DRAFTSMAN, AUTOCAD

[Admin]

Gulf SPIC - Kuwait Kuwait : DRAFTSMAN (PIPING)

Website: http://www.gulfspic.com

Designation: DRAFTSMAN (PIPING)
Experience: 8 Years
Location: Kuwait

Job Description:
Must have experience in AUTOCAD. Shd have experience in other software such as Microstation is preferred. Shd have experience in Engineering Consultancy field preferably in Oil & Gas / Petrochemical Areas.

Desired Candidate Profile:
Require Minimum 8 yrs Of Experience.
Passport Is Essential
Qualified in Diploma / ITI.
Should Ready To Relocate To Kuwait

Company Profile:
Gulf Spic Contracting Company WLL (GS) is an Engineering, Procurement & Construction contracting company well established and operating in Kuwait providing detailed engineering, construction, commissioning, operation and maintenance services to Oil & Gas, Petrochemical and Power plant sectors in Kuwait. GS is a company established by the Dr.Fouad.Fawzi Al-Khadra along with M/s. Southern Petrochemical Industries Corporation [SPIC], Limited, India.

Address:
Southern Petrochemical Industries Corporation Limited
SPIC HOUSE,
No.88 Mount Road,
Guindy.
Chennai,TAMILNADU,INDIA 600 032

Email Address: sashikala@spic.co.in

Keywords: AUTOCAD - PIPING

[Abdulrehman]

APPLICATION FOR THE POST OF PIPING DRAFTSMAN, AUTOCAD

Dear Sir/Madam,
With reference to your advertisement, for the subject post is vacant under your kind control; I offer my services for the same.

I have acquired sound overall knowledge of leading edge engineering principles, tools and practices with emphasis on drafting and designing. I am proficient in the use of various drafting tools including current releases of AutoCAD.

I will really appreciate your sincere consideration in this regard. Looking forward for your response.
My detail CV is attached with this application.

Abdul Rehman Qureshi
Email : q_abdulrehman AT hotmail.com

PERSONAL DETAILS :
Nationality : Pakistani
Profession : Draftsman (Mechanical)
Position in Company : Senior CAD Person
Years Experience : 14 years (Oct. 1992 to Till)
Date of Birth 20-11-1967
Father Name : Muhammad Mushtaq

OBJECTIVE :
To join an illustrious organization in order to apply various technical and drafting skills obtained during my experience with different organizations.

PROFESSIONAL EXPERIENCE :
1. PETROSIN ENGINEEING PRIVATE LIMITED, G-6/3 Islamabad. (Engineering and Design Department)
(Dec. 2007 to date)

a). QADIR PUR EXPENSION PROJECT.
- Prepared general arrangement drawings for several units required for complete operation of plant including Degasser & 3-Phase Separator.
- Prepared GA & fabrication drawings for Stock Tank.

b). SKID MOUNTED KNOCKOUT VESSEL OGDCL (5 Nos.)
- Prepared General arrangement & fabrication drawings for 5 Nos. of skid mounted knockout vessels to be installed at Bahu Development Project.
- Prepared 3D view of skid mounted vessels including piping & instrumentation.

c). BIDDING OF KPD DEVELOPMENT PROJECT (Two trains of 420MMSCFD)
- Prepared P&IDs and PFDs as per preliminary design.
- Layout for Plant Area covering X = 484.224 x Y = 612 M.

d). 10 Nos. OF PRESSURE VESSELS FOR QADIR PUR PREMEATE COMPRESSION PROJECT.
- Prepared GA drawings for 10 Nos. vessels.

e). 3-PHASE SEPARATOR FOR OGDCL (3 Nos.)
- Prepared P&IDs and GA drawings for HP, MP and LP 3-Phase Separators.

f). SKID MOUNTED TEST & PRODUCTION SEPARATORS FOR BP PAKISTAN.
- Prepared P&IDs and GA drawings for Test & Production Separators.
- Prepared Construction detail drawings, Including BOM.
- Prepared 3D model of both Separators and generate the piping Isometric drawings as per ASME Section VIII, DIV-I, Latest Edition.

2. PAEC Islamabad (Engineering and Design Department)
(Feb. 2004 up to 03 Jan. 2008)
- Prepared Piping layout drawings of chemical plants.
- Prepared 3D Models drawings of different plants.
- Prepared Layout of plant area for Chemical Plant.
- Prepared different mechanical parts drawings.

3. QSA Surgical (Pvt.) Ltd, Sialkot (Aug 1999 to Jan 2006) Production Department.
- Operate the NC (Spot Welding Machine) & CNC (Wire Cut) machine, and prepared different surgical instruments.

4. DESCON ENGINEEIRNG, Lahore, (Maintenance Department) P & E
(From 02-12-2000 to 20-06-2001)
- Worked as a lead man (Mechanics) Maintenance of Mechanical Equipments like, Gen Set, Hydraulic Mobile Cranes, Compressors and Centrifugal Pumps etc.

5. IVCC ENGINEERING 18 Km, Ferozpur Road, Lahore.
(From Oct 3, 1992 to 15 Nov. 2000).
- Supervised the drilling work for water wells and pile foundation at different projects.
- Also supervised the Repair & maintenance work (P & E) at different projects.

I am seeking a challenging and rewarding position in your organization that can utilize my existing skills and provide opportunities to gain new ones.

QUALIFICATION :-
- Diploma of Associate Engineer (Mechanical) Ist Division
- Matric (Science) Ist Division

PROFESIONAL COURSES :
- A+ Certification
- AutoCAD
- CNC (Wire Cut)
- Auto Plant 3D

TECHNICAL SKILLS :
- AutoCAD 2D & 3D
- ASME Codes and Standards
- MS Office
- Internet Browsing relating to the job

[MD FAHIMASHRAF]

MD FAHIM ASHRAF
E-Mail : mdsonu123 AT gmail.com

AutoCAD operator level positions in Design Department with an organization of repute

Overview :
A bright individual having acquired proven educational background in the area of auto cad & designing cat loc designing
Currently designated as auto cad operator with Universal Industrial Plants Mfg. Co. Ltd, since the last 10 Months. Total experience achieved is 1.8 Years.
Have acquired hand on experience in various Design the Plant for Oxygen, Nitrogen gas.
Self motivated, hard working and goal-oriented individual, with a high degree of flexibility, creativity, resourcefulness, commitment and optimism, determined to carve a successful and satisfying career in the industry.

ORGANIZATIONAL EXPRIENCE :
TATA Steel ,Jharkhand Aug’07to May’08
Universal Industrial Plants Mfg. Co. Ltd Since3 June’08
Cad operator

ACADEMIA :
H.S.C B.S.C.B PATNA, 2003
I.SC B.I.E.C PATNA, 2005

Technical detalls :
AUTO CAD2006 TO 2009 (SCVT)2D &3D with MDT BHARAT INSTITUTE JAMSHEDPUR
ITI(NCVT)IN ELECTRICAL IMARAT UMAR TECHNICAL INSTITUTE ORRISA IN 2007.

Working profile :
Title : Making a layouts of plants, equipments layouts,& P & ID Diagram for plants
Title : Making 2D & 3D drawing of the plants equipment.
Title : Making plant operation manual & catalogue for Plant.
Team size : 5.

PERSONAL PROFILE :
FATHER’S NAME : MOHAMMAD KALIM ASHRAF
MOTHER’S NAME : RAUSHAN KHATOON
DATE OF BIRTH : 12 DEC 1987
SEX : MALE
NATIONALITY : INDIAN
LANGUAGE : HINDI, URDU & ENGLISH
RELIGION : ISLAM
MARITAL STATUS : UNMARRIED

STRENGTH :
Highly energetic and able to work under tight dead lines.
Zest for reaching out for impossible is tempered by extensive experience.
Learn the new technologies in the dawn and implement them in the day.

HOBBY :
LISTENING MUSIC, PLAYING GAMES & BOOK READING

IT Skills :
Auto cad 2d& 3d ,MDT ,Photoshop ,CorelDraw ,Microsoft office

PERSONAL DETAILS :
Date of Birth : 12th December, 1987.
Languages known : English, Hindi.
Hobbies : Dancing, Playing Soccer, Swimming, Listening Music.

[shahrajesh64]

From,
Shah Rajeshkumar R.
Dear Sir,
I have come to know through reliable source that there are vacancies existing for the above mentioned post and the recruitment's are being done. As yours is a well established firm and organisation, I would like to take the opportunity to offer my candidature for the above mentioned post. If given a chance I promise to prove the best of my ability to the satisfaction of my superiors. Hereby I enclose my bio data and finish with more details on hearing from you at Present i am working in Tebodin Middle east ltd. (Netherlands Company)

From 22 July 2007 Seconded to Enoc. Processing company LLC (ENOC Refinery). Jebelali Port , Dubai (With Abu Dhabi Employment visa)

As a Mech. Piping Draughtsman
From 18 June 2006 to 22 July 2007 worked in Doha Petroleum Construction
Co. Ltd. State Of Qatar (With visit visa) seconded to BC & T Consultant a (UNITED KINGDOM Company)

As a Sr.Mech. Piping Draughtsman
Client & Project Handled:-
-EPIC New LPG Bottling Plant For woqod at New Doha
-EPIC Of Diesel Filling Station At Halul Island
-EPIC Of Mini Nitrogen Plant At Halul Island

Experience In Brief:-
Totel 20 Years (15 Years in Autocad)
PIPING
Preparation Of Piping General Arrangement Drawings
Equipment Layout For Convenient Piping
Preparation Of Process & Instrumentation Diagram.
Generating Isometrics From Piping General Arrangement
With M.T.O From General Arrangement
As Built Of Isometrics, General Arrangement & P&Ids As Per Site Condition

EQUIPMENT :
Detail Drawings Of –
Pressure Vessel
Column
Mixing Vessel
Nozzle Orientation & Detail

STRUCTURAL :
Pipe Rack General Arrangement Drawings And Detail
Shaded & Structure Building And Detail
Platform For Vessel And Tanks As Per Standard
Cat ladder & Staircase, Handrail And Railing

Current location : Jebelali Port , Dubai
Highest educational attainment : ITI (Technical Edu. Bord. Gujarat)
Gulf/Overseas experience : 3 YEARS
Visa Status (with or without NOC) : Abu Dhabi Employment visa without NOC
LEVEL OF FOREIGN LANGUAGES:- GUJARATI,HINDI,ENGLISH (READ,WRITE,SPECK)

I remain your sincerely
R.R.Shah

[jakkam124]

To,
The HRD /Personal / Recruitment Manager
Sub : Application for the post of CAD OPERATOR Draughtsman.
Dear Sir,
The purpose of this communication is to introduce myself for considering my application for the post of AUTOCAD Draughtsman. In your esteemed Organization.
I here with submitting my detailed resume with an aim to pursue a job in your Organization and become an asset to toe the organization. I am confident that I can fit in to a challenging job where I can explore my skill. Given an opportunity I will prove My knowledge and experience to the benefit of the organization.
Thanking you in advance for your time and looking forward a favorable response.
Kindly Regards,
SANTHOSH JAKKAM

CURRICULUM VITAE
Name : Jakkam Santhosh
Employer : Faysal M. Qahtani Sons Co
Work Record : January 2009 to Present
Position : AUTOCAD DRAUGHTSMAN
E-mail : santhu.124 AT gmail.com/santhu_124 AT yahoo.com

Career Objective :
To obtain a long term and fulfilling career with a high performing Management Team of a prestigious organization and to continuously develop my skills and enhance my knowledge to its fullest potential.

Summary of Experience :
Two (2) years experience as an AutoCAD Draughtsman in construction of various Oil & Gas Projects own by Saudi Aramco.

Work Experience :
1) Project : Saudi Aramco Projects
Khurais Upstream Facilities North & South
Khurais, Saudi Arabia
Position : AutoCAD Draughtsman
Duration : January 2009 to June 2010.

2) Project : Saudi Aramco Projects
Khurais Mid-Form Contract
Khurais, Saudi Arabia
Position : AutoCAD Draughtsman/Document Controller
Duration : June 2010 to Present.
Job Description :
- Preparation of details plans, such as Berm details, Road crossing details, Tie-in details, Platform details, Nameplate & Kilometer markers details etc.
- Preparation of Site Accommodation details and Site office details.
- Preparation for all oil & Water Well heads fencing details.
- Preparation for all oil(230) & Water(119) Well heads Plan & Profile details to be used as reference to jobsite construction
- Prepared As-Built drawings.

EDUCATION :
2001 – 2002 : Secondary School of Certificate (SSC). ZPSS, Wadyal.
2002 – 2004 : Intermediate (+2) (MPC). SSR Junior College, Nirmal.
2004 – 2007 : Bachelor of Science (MPC). Vashista Degree College, Nirmal.

Computer Skills :
Operating System : Windows 2000, XP
Packages / Tools : AutoCAD-2009, MS-Office

PERSONAL DATA :
Name : Jakkam Santhosh
Father’s Name : Narayana
Sex : Male
Nationality : Indian
Date of Birth : April 12, 1986
Marital Status : Single
Religion : Hindu
Languages : English, Hindi & Telugu

Declaration :
I hereby declare that the information furnished above is true to the best of my knowledge.
(J. SANTHOSH)

[acadgroup]

Osama El Maghrby
Senior Data Processor
(Geophysics)
Inspection & Survey Services
AutoCAD Specialist (Professional)
Sr. Draftsman (any field )

E-Mails : cadgroup AT hotmail.com
osamacad AT yahoo.com
Website : www.cadgroup.jeeran.com/new

Personal Information :
Nationality : Egyptian
Resident of : Egypt – Cairo
Birth date : 19th March - 1980
Gender : Male
Marital Status : Married AT 2001
Military Service : Exempted
Passport Number : 121750
Sea man Number :
HSE :
Languages : 498327 ( Place of issuance :Panama )
H2S Course, HSE Induction Course & Fire fighting Course at NPCC Training Center
And Sea Survival Course from ( GSTC ) U.A.E
Arabic, native language.
English, Good spoken & written.

Work Experience :
MASRIA CO. ENGEINEERING, TRADING & CONTRACTING (EGYPT). May 2009 – To Date
Industrial zone no. 1 – Area 2-Block 13013 El Obour City – Cairo - Egypt
DRAFTSMEN TEAM LEADER
The development department is the latest addition to Masria Company’s work team.
The thought of adding this department was essentially intended to support the design department,
And the development department tasks were expanded.

My mission as a team leader Is :-
- Develop and upgrade the engineering software (AutoCAD) to meet Company criteria.
- Create and update the data base of the company (plan view drawings for design department, price and specification for the sales and secretary departments…etc.)
- Link different departments of the company (design, Sales…etc.) together with a new software.
- Create a back up software for the design projects to avoid losses and misses
- Solve the problems issued during the usage of different engineering software.
- Set a dead time line for the projects in hand
- Create the standard sheets of the company (Data Sheets, Design form….etc.)

National Petroleum Construction Company ( NPCC ) U.A.E Jan. 2007 – Apr. 2009
P.O. Box 2058, Mussafah, United Arab Emirates ( NPCC Survey Division )
GEOPHYSICS SENIOR DATA PROCESSOR
o Survey data processing.
o Site Scan and Pipeline inspection.
o Positioning and anchor clearance.
o As built drawing. ( AutoCAD 2D and 3D )
o Processing all the geophysics data coming from the Geo. Engineer.
Chart Generating
o ( Bathymetry - Echo Sounder Track - Fish Track – Contour and Seabed Features …etc.)
o Platforms 3D Structures.
Specialized Software
o EIVA Software ( Processing Package ).
NaviEdit Survey Data Editing
NaviModel Digital Terrain Modeling
NaviPlot Fairsheet Charting
o AutoCAD Software.
o AutoChart Software.
o Microsoft Office Package.
MASRIA CO. ENGEINEERING, TRADING & CONTRACTING (EGYPT). May 2005 – Dec. 2006
74, Gozif tito St. El Nozha. , Cairo
CAD DESIGNER
- AutoCAD Specialist.
- Making layouts of kitchen & laundry equipment for great projects by specialized programs.
- Graphic designer for equipment catalogues & Internet Website.
- Use All M.S Office Programs ( Creating data base for company projects )

THALES GEOSOLUTION OVERSEAS LIMITED. (EGYPT). Sep. 2000 – Dec. 2004
Katamia Road, 12 km Cairo - Sokhna Road, Cairo. – Egypt
SENIOR DATA PROCESSOR
My mission as a data processor Is :-
o Guide the ROV pilots in conducting a R.O.V. General Visual Inspection survey.
o Recording digital video for the Pipeline and jackets R.O.V Visual Inspection.
o Representing all anodes positions and all events from the seabed inspection.
o Deliver all the acquired inspection Data :
- Platform 3D Model.
- Final Charts for site survey
- List of all inspected items (Members, Nodes, Legs, Cutting points …etc.)
- Linked to the 3D model, the digital video and digital still photos.
- List of all debris events at the area surrounding the Jacket base.
- Log of wall thickness and marine growth thickness measurements.

SEMINAR CONSULTANT CO. Aug. 1998 – Sep. 2000
Eltayran St, Nasr City, Cairo, Egypt.
CAD DESIGNER
AutoCAD Draftsman 2D, 3D & Data Processing as Part time.
Work as a free lancer for other oil companies.
I Accepted in previous projects for the following clients
UAE UAE Qatar KSA UAE INDIA Qatar EGYPT

Skills :
Skill Level Years practiced
Geophysics Data Processing ( On/Offshore ) Expert More than 10 years
EIVA Software.
AutoChart Program. Expert
Good More than 3 year
More than 3 year
All MS-Office Programs. Expert More than 10 years
Internet programs Expert More than 8 years
AutoCAD R.14 Up To 2011 and MAP (2D,3D) Professional More than 10 years
Photo Shop & Most Graphic Programs
Corel Draw
Free Hand
Programming ( Visual Basic & AutoLisp )
Wide Knowledge in all Hardware Intermediate
Beginner
Beginner
Good
Expert More than 2 years
More than 1 year
More than 1 year
More than 3 years
More than 7 years

Education :
Technology College Cairo, Egypt
( Institute After Technical Schools ) – ( Certified ) ( Architectural Designs )
Courses and Training
1998 / 1999 American University ( and other institutes )
Cairo, Egypt August 1997
AutoCAD Program 2D,3D
ILI Institute August 1998
Cairo, Egypt
All Programs in Microsoft office Course (Word, excel, access, power Point, outlook, front page).

Consolidated Contractors Company.
Markup drawings & spooling details using in-house software ( Taliso )
National Petroleum Construction Company ( NPCC ) U.A.E
Survey Data Processing Programs ( EIVA Package ).
Inspection Programs ( Visual Works ).
I have Worked in these Countries Before : ( U.A.E , KSA , QATAR , INDIA )
Please carefully read about my skills & services on my personal website : www.cadgroup.jeeran.com/new
Thank you for your time. Updated on Jan ‘2010

[Guest]

Dear Sir/Madam ,
I would like to apply as a draftsman according to your posted job.
Herewith my resume for your further review..

RODEL D. JARDIN
BACHELOR OF SCIENCE IN CIVIL ENGINEERING
E-mail Address : jardinr AT yahoo.com

CARREER PATH SUMMARY :
POSITION PERIOD COMPANY :
Draftsman December 27,2006 – present Al-Watani Factory For Fiberglass Technical Staff Co. Mina Abdulla Kuwait
Draftsman June, 2004 – November 2006 City Engineers Office Tacloban City Philippines

SPECIAL SKILLS :
- 2D & 3D Drafting/Modeling using Autodesk Inventor
- Architectural Drafting/Modeling in 3D using Autodesk Rivet Architecture
- Realistic view rendering using Autodesk 3D Max
- 2D & 3D Drafting/Modeling using Autodesk AutoCad
- Structural Analysis using Staad Pro 2007 (Bentley)
- Foundation Design Analysis using Staad Foundation (Bentley)
- Stress Analysis using Algor FEMRO
- Pipe Stress Analysis using Algor PipePak
- Database Programming using Microsoft Access & Excel
- Land Surveying
- Supervision and technical solution

PERSONAL DATA :
Age : 28
Birthday : Oct. 3, 1981
Nationality : Filipino
Civil Status : Single
Sex : Male
Hobbies : Playing guitar, singing, listening music
Language Spoken : English, Filipino, Arabic

WORK EXPERIENCES & DESCRIPTION :
December 27,2006 - present Al-Watani Factory for Fiberglass Co.(www.watanigrp.com)
Manufacturer of GRP pipes, fittings, tanks, molded products, polycrete etc.
Subhan Kuwait (Main Office),Mina Abdulla (Plant)
Position : Draftsman
Functions : Provide fabrication drawings for all company products 3D using most advance computer programs.

June 2004 – November 2006 City Engineers Office Tacloban City,Philippines
Position : Draftsman
Functions : Provide tender drawings for the structural projects of municipalities.

EDUCATIONAL BACKGROUND :
- College Graduated Bachelor of Science in Civil Engineering June 1998 – March 2004 Eastern Visayas State University(former Leyte Institute of Technology) Tacloban City, Philippines
- Secondary June 1994 – March 1998 Leyte National High School Tacloban City, Philippines
- Primary June 1988– March 1994 LaPaz Central Elementary School LaPaz Leyte,Philippines

[selvadubai2006]

CURRICULAM VITAE
SELVAKUMAR GOVINDARAJ
E-mail : selvadubai2006 AT gmail.com

Professional Objective :
I am looking for new and challenging position, which will make best use of my skills and experience and enable further personnel and professional development.

Professional Experience :
From Jan 2006 to Till Date
Working as a Mechanical Cad draughtsman in ETA-Melco Elevator Company LLC. (A joint venture with Mitsubishi Electric Corporation, Japan) Dubai.
- Job Involves :
Preparation of layout, detailed, electrical drawings & as-built drawings for elevators.
Preparation of site coordination drawings, site study & inspection at site.
Preparation of project documents in the aspect of design, attending of technical queries from principles.

- Major projects involved in ETA-Melco Elevator Company LLC, UAE.
Central Market Redevelopment Project, Abu Dhabi, UAE.
Abu Dhabi financial centre (ADFC), Abu Dhabi, UAE.
International Petroleum Investment Company (IPIC), Abu Dhabi, UAE.
Al Ain Mall and Resort, Al Ain, UAE.
Seba Tower, Abu Dhabi, UAE.

From Oct 1998 to Aug 2000
Worked as a Civil Auto Cad draughtsman cum site supervisor in P.MAHENDRAN ARCHITECTS PVT LTD, Chennai, India.
- Job Involves :
Worked on preparation of architectural drawings, overall plot plans, general arrangement & detail drawings..
Prepared Civil Shop Drawings.
Prepared Civil as built Drawings.

- Major projects involved in P.MAHENDRAN ARCHITECTS PVT LTD, CHENNAI.
Ponnu Samy Restaurant, Royapettah, chennai.
Vaigai Internatioanl, Kodaikanal, India.
Resident and office Building (G+5), Parrys, chennai.
Viyaya shanthi appartments, India.

From June 2001 to Feb 2002
Worked as a Civil CAD draughtsman cum site supervisor in CITADELSOFT. COM, Chennai, India.
- Job Involves :
Preparation of residential and commercial building drawings.
Preparation of site co-ordination drawings.

Educational Qualification :
Academic :
Secondary school leaving certificate from Educational Board, Government of India in 1993

Technical :
Draughtsman in civil engineering from MONFORT industrial training centre, Chennai, India, (Under NCVT India).1998
Diploma in Archiin CADD centre training services, Mylapore, Chennai.1998

Computer Proficiency :
Drafting platform : AutoCAD
Desktop software : MS office XP

[Guest]

DEAR SIR,
PLEASE FIND THE MY RESUME.

RESUME
Mohd Mujahid
Email : hellomujahid87 AT gmail.com
mdskn_1987 AT yahoo.co.in

Objective :
To achieve the best opportunity in the field of Information Technology by doing hard work with sincerity and to gain a deep insight things and use it for the productive development in the globe.

Summary :
- Excellent skills with short learning curve when faced with new challenges and environments.
- We are distribe the job to the employee.
- To Maintain the Job status of daily productivity.
- Co-Ordinates the QA and QC Team.
- Receive the jobs from the client.
- Transmit the jobs to the clients on due date.
- We are responsible to the jobs.

Work Experience :
- Total 3.5 years work experience in Publishing Company
- 1.7 years work experience INNODATA ISOGEN Pvt. Ltd. As a Data Processor.
- 1 year work experience APTARA Pvt. Ltd. As a Programmer.
- Currently I am working in INNODATA ISOGEN Pvt. Ltd. as a production Associate (Team Lead).

Technical Skill :
Languages C, C++
Databases MS-Access, SQL Server 7.0
Scripting Languages VB Script & Java Script
Package MS-Office, PageMaker, Photoshop
Others HTML, XML, CSS, DTD, XSLT, EPSILON, EPUB, MOBIPOCKET, AMAZON KINDLE, I-POD

Educational Qualification :
Degree School/College/University/Board Year :
MCA Sikkim Manipal University Appearing
B.Sc. (IT) Sikkim Manipal University 2008
Intermediate (Science) H.R. Inter College, Khalilabad, Sant Kabir Nagar, U.P. (U.P. Board) 2004
High School (Science) S.J.G.S. Inter College, Menhdawal, Sant Kabir Nagar, U.P. (U.P. Board) 2002

[Guest]

Shakir Showkat Fansopkar
E-mail : fansopkars AT yahoo.in

RESUME
POST APPLIED FOR : PIPING DRAUGHTSMAN

CARRIER OBJECTIVE :
Looking for a challenging and responsible position in AutoCAD Draughtsman (Mechanical/Piping) with a reputed organization where my skills and several years of experience can be utilized and I can improve and advance in position and knowledge.

EDUCATIONAL QUALIFICATION :
S.S.C Exam Passed from Kolhapur Board in year 2002.
H.S.C Exam Passed from Kolhapur Board in year 2006.

TECHNICAL QUALIFICATION :
Diploma in Mechanical Draughtsman from (I.T.I) Industrial Training Institute in Ratnagiri.
Diploma in Piping Draughtsman from Conducted under (R.E.S) Royal Education Society Ratnagiri Maharashtra.
Diploma in Computer Aided Design (AutoCAD 2D & 3D Modeling) has Passed in 1st Class From a PC Point Computer Education Ratnagiri Maharashtra.

COMPUTER KNOWLEDGE :
Completed AutoCAD (2D Modeling).
Certificate in AutoCAD release march 2007 (And good working knowledge with release AutoCAD 2004, 2006, 2007, 2008 & 2009).
Handy to work with operating system Windows XP, Windows 98, Windows 95 Internet & Email etc..
Microsoft Excel & Microsoft Word.

EXPERIENCE IN BRIEF :
4 Years experience in the field of Piping & Engineering in preparing all kinds of drawing independently through AutoCad.
Preparation of Piping Isometric Drawings.
Preparation of Nozzle Orientation.
Preparation of Equipment Layout.
Preparation of Piping Drawings.
Preparation of Bolting Layout.
Preparation of Process and instrumentation Diagram.
Preparation of Utility Line Diagram.
Preparation of Detailing & Section Layout.
Preparation of As-Built Drawings.
Preparation of Pipe rack Layout.
Preparation of Piping Support Details.
Bill of Materials.

PROJECT HANDLED :
M/s. Inogent Laboratories Pvt. Ltd. (Hyderabad)
M/s. Actavis Pharma Manufacturing Pvt. Ltd. (Alathur)
M/s. Hindustan Unilever Ltd. (Rajpura)
M/s. Dr. Reddys Laboratories Ltd. (Hyderabad)
M/s. Eisai Pharma technology Mfg. Pvt. Ltd. (Vizag)

WORK EXPERIENCE :
India Exp. :
1) Work As a Piping Draughtsman in
B. Mehtalia Consultants Pvt. Ltd.,
G-11-13-15, Shilpin*Centre,
Near Manoj Udyog Bhavan,
G. D. Ambedkar Marg,
Wadala, Mumbai – 400 031.
From Octomber. 2007 to December 2010.

2 ) Current Working As a Piping Draughtsman in
Knexir Consultants Pvt. Ltd., (Consulting Engineers)
Sahney Compound, 27, Kirol,
1st Floor, Building B,
Vidyavihar (W), Mumbai 400 086
From December 2010 to Till.

[Guest]

Curriculum Vitae
Dipesh N. Prajapati
E-mail : pra_dipesh AT yahoo.co.in

Objective :
- Seeking a Challenging and Growth oriented profession in Piping, where I can utilizes my technical background for the benefit of the organization.

Technical Skills :
- Following Activities can be carried out :

Working Activities :
- Preparation P&ID Drawings and Equipment Piping Layout, Overall Piping Layout.
- Preparation of Tendering and Bulk Material Take Off (MTO) from P&I D's and Equipment Layouts.
- Piping material Take-Off,
- Preparation of Equipment Nozzle Orientations Plan,
- Preparation of Tank farm Area, Overall Plot Plan Layout,
- Designing for Piping Layout/Pipe rack Layout,
- Design and development of Equipment Layouts.
- Design and Development of Piping Layouts.
- Preparation of Isometric Drawings with Bill of material from piping GAD.
- Extraction of Isometric, output in G.A,working with Cad Works Plant Professional.
- Tie-in data List.
- Line list preparation.
- Equipment and Piping layout.
- Piping GA, ISOMETRIC, Plot Plan, P&ID Drawings
- Rack Piping, Exchanger piping, Pump Piping.
- Preparing Pipe rack and Tank Farm Piping.
- Fittings, Flanges, Valves etc,
- Preparation of Valve Material Specification, Piping Material Specification,
- Familiar with Codes and standards like ASME ASTM, ANSI.API.BS etc

Work Experience :-
- Worked as Sr. Piping Draftsman with M/s Quanta Process solutions. Vadodara. from March-2010 to Till date. (9 month).
- Currently working as Sr. Piping Draftsman with M/s Alpha Projects. Vadodara. On Deputation at TATA CHEMICALS. from Sep -10 to till date on contract basis.
- Worked as Sr. Piping Draftsman with M/s Sam-de-Services. Vadodara. from Dec-07 to Sep-10. (2 Years 9 month).
- Worked as Piping Draftsman with M/s Parth Project Services. Vadodara. (Turnkey Projects.) from Oct-06 to Dec-07. (1 Years 2 month).
- Worked as Mechanical Draftsman with M/s Kaushal Engg.Services. Vadodara. On Deputation at L&T Energy Center. CCPP Dept & L&T Chiyoda Process Dept. From Sep-05 to Sep-06. (1 Years ).
- Worked as Piping Draftsman with M/s Chemech Engg.Services.Bharuch. (Detail Engg. Consultant) From July-01 to Aug-05. (4 Years ).

Projects Executed :-
Being an active team member, I had executed following Projects complete,
1) Quanta Process Solutions,
- KDAC CHEM PVT. LTD. Running.
2) Tata Chemicals. Mithapur,
- MUW-2 Asset Renewal.

3) M/s Sam-de-Services,Vadodara. (Detail Engg. Consultant.)
- Bayer Crop science Ltd, Ankleshwar –
Day Tank Farm, Off site area, Process Plant. (Ac-1),
Expansion of Nemacure Plant (Ac-4),
Brine plant (AC-2),
Expansion of Fluopcolide Plant,
Expansion of Triazophos Plant. (Ac-2).
- Haubach Color Pvt. Ltd – Alpha Blue Plant Expansion.
- GFL Dahej –Site activities Measurement & Updation.
Of Existing & New Prep. Of drawing as per Requirement.
- Tata Projects – Ongc Olpad.
- DRDE GWALIOR.
- BRPl ASSAM.
- Replacement of Coolers, (GSFC Baroda.)
- Preparation of Pipe rack As Built Drawings (GFL Halol)
- Expanded Polymers Ltd. Dahej – As Built.

4) M/s Parth Project Services. Vadodara. (Detail Engg. Consultant.)
- Dr’ Raddy's Laboratory Ltd. (Unit-5 & 6)
- Meditab Limited.
- Cipla Ltd. (kurkumbh).
- Sud-chemie Ltd. (Nandesari).

5) M/s Kaushal Engg. Services. Vadodara. (Detail Engg. Consultant.)
- Preparation of P&IDs for “BA Energy” IN Auto CAD. Canada
- Preparation of P&I D's for “Indial Oil Corporation Ltd ” IN Auto CAD.
- Preparation of P&I D's for “Petronas Penapisan in Microstation-SE
- Preparation of P&I D's for “Bahrain Petroleum Co. BSC” In Autocad-2006
- P&I D's Preparation & Splitting for “Chennai Petroleum Corpo. Ltd” In Autocad.

6) M/s Chemech Engg. Services. Bharuch. (Detail Engg. Consultant.)
- IPCL & IOCL Vadodara,
- Lupin Laboratory Ltd, Ankleshwar,
- Isagro-Asia Panoli,
- J.B.CHEMICALS. Panoli,
- Hikal Ltd. Panoli,
- Cadila Pharma Ltd, Ankleshwar,
- Videocon Ltd, Bharuch,
- Kaypee Mechanical pvt. Ltd. Bharuch,
- L&T Bharuch,
- Huber Ltd. Zhagadia,
- KLJ Organics Ltd. Zhagadia
- USV Daman, Vapi,
- Dyke Engineering Ltd,
- Welkin Engineering Ltd,
- Dolphin Engineering Ltd.

Educational Qualification :-
EXAMINATION BOARD/ UNIVERSITY YEAR OF PASSING CLASS :
S.S.C G.S.E.B Gandhinager March-1999 Second
Draftsmen Mechanical I.T.I N.C.V.T Gandhinagar July-2001 First
Auto Cad LCC BHARUCH Jan-2002 A
H.S.C G.S.E.B Gandhinager March-2005 Pass

Computer Proficiency :-
- Operating Systems Worked with : Windows /2000/XP.
- MS office-2000/XP
- CAD Software : Auto CAD R-14 to 2011,
- Micro station-SE,
- Cad Works Plant Professional (3D Modeling)
- Ms-Visio.

[Unregistered]

RESUME
M.J.ARUN KUMAR
G-MAIL : mjarunkumar2 AT gmail.com

OBJECTIVE :
Seeking good positionDIPLOMA in MECHANICAL ENGINEERING TOOL & DIE MAKING ( Design and fabrication ) oriented work environment to implement my knowledge in the field.

EDUCATIONAL QUALIFICATION :
QUALIFICATION INSTITUTION YEAR OF PASSING % OF MARKS :
D.M.E ( TOOL & DIE ) GOVT Technical Traning Center ,Guindy , Chennai - 32 APRIL - 2013 84.2%
SSLC Kesari higher sec school T.Nagar Chennai – 17 APRIL – 2010 72%

DESIGNING KNOWLEDGE :
** AUTO CAD
** SOLID WORKS

EXPERIENCE :
** 5 Months in Sri Balaji Tech making for ship valves.

INTRESTED :
** DESIGN IN PRESS TOOLS
** DESIGN IN PLASTIC MOULDING
** DESIGN IN JIG AND FIXTURE

PERSONAL PROFILE :
NAME : M.J.ARUN KUMAR
FATHER NAME : M.JAYARAO
DATE OF BIRTH : 15-10-1992
SEX : MALE
LANGUAGE KNOWS : English,Tamil,Telugu & Hindi
HOBBIES : Playing chess, Reading books

DECLARATION :
I hereby declare that all the above stated details are true to the best of my knowledge.
Place : Chennai
Date : 17:09:2013
yours truly,
( ARUN KUMAR .M.J )

[Unregistered]

Any opening for diesel mechanical? He is having 14+yrs exp in gulf countries now he is in India