www.bgrcorp.com BGR Energy Systems Ltd Chennai, Delhi : Power piping design

[Admin]

bgrcorp.com

BGR Energy carries on the business in two segments, the Supply of systems and Equipment and Turnkey Engineering project contracting.

In the systems and equipment business, the company design, engineer, manufacture, sell and service a range of systems and equipment for the Power, Oil & Gas, Refinery, Petrochemical and Process Industries.

In the Turnkey Engineering project contracting business, the company engineer, manufacture, procure, construct and commission projects in the Power and Oil & Gas sector, wherein it take Turnkey responsibility to supply of a range of equipment and services, including the civil works required for a project and other work as may be required under the contract for such project.

Designation DEPUTY GENERAL MANAGER-MECHANICAL/PIPING DESIGN

Job Description For power projects division.
Should be exposed to multidisciplinary projects ( Thermal, Combined cycle), Conversant with project schedule , monitoring , implementation, planning , Thermal power plant /Combine cycle power plant system design and Equipment sizing , Plant layout, Piping design Overall responsibility , identify resource requirement and indent , project monitoring , budget verification and recommendation to Management , cost reduction, guiding the team to achieve the targets, identification of new EPC , Engg drg /documents approval Review of Engg document /design/technical offers. Engg co ordination meeting with in house and other Engg agencies /customer/suppliers. Equipment finalisation. Technical recommendation /evaluation of equipments. Conversant with codes and standards system design of the following packages. Boiler , turbine , water system , ETP, STP, Water balance , chimney, ESP, APH ,DEA, Heat exchanger, condenser , Pumps , EOT , cranes, valves , boiler feed pumps , turbine driven feed pumps, determination of temperature and preparation , design basis report for all the bop equipments . Plant layout , building sizing ,equipment sizing, Plant operation and control system.

Desired Profile Should be exposed to multidisciplinary projects ( Thermal, Combined cycle), Conversant with project schedule , monitoring , implementation, planning , Thermal power plant /Combine cycle power plant system design and Equipment sizing , Plant layout, Piping design Overall responsibility , identify resource requirement and indent , project monitoring , budget verification and recommendation to Management , cost reduction, guiding the team to achieve the targets, identification of new EPC , Engg drg /documents approval Review of Engg document /design/technical offers. Engg co ordination meeting with in house and other Engg agencies /customer/suppliers. Equipment finalisation. Technical recommendation /evaluation of equipments. Conversant with codes and standards system design of the following packages. Boiler , turbine , water system , ETP, STP, Water balance , chimney, ESP, APH ,DEA, Heat exchanger, condenser , Pumps , EOT , cranes, valves , boiler feed pumps , turbine driven feed pumps, determination of temperature and preparation , design basis report for all the bop equipments . Plant layout , building sizing ,equipment sizing, Plant operation and control system.

Experience 11 - 19 Years
Industry Type Oil and Gas/ Power/Infrastructure/Energy
Functional Area Engineering Design, R&D
Education UG - B.Tech/B.E. - Mechanical
PG - M.Tech - Mechanical
Location Chennai, Delhi

Keywords Any area from Thermal power plant /Combine cycle power ,Piping

Contact A.Nilofer Sharif
BGR Energy Systems Ltd(GEA Energy Systems India Limited)
Guna Buildings,
443, Anna Salai,
Teynampet
Chennai,Tamilnadu,INDIA 600018
Telephone 91-044-24334940
Email nilofer@bgrenergy.com
Website http://www.bgrcorp.com

[Guest]

Resume of:
Dick L. Miller
311 SE 16th St,Cape Coral, Fl 33990
(239) 574-0994
dicklmiller@yahoo.com

SUMMARY
Senior Level Mechanical Designer with over Thirty years experience in Nuclear, Paint Finishing and Automotive Assembly Plants. Background includes Construction Management, Mechanical Design & Engineering Subcontract Management, CAD system administrator, 3D modeling, Detailing, Design, Checking, Field Engineering, start up and debug, coordination of subcontractors in office/field and proposal support. Four and a half years of International experience in Shanghai, China as a Mechanical Design Consultant. (HVAC, Process Piping Systems, Sheet Metal Enclosures and Structural Platforms)

PROFESSIONAL EXPERIENCE
The P1 Group – Lawrence, Kansas 2008-2009
Senior Piping Designer
Assigned to the Twin ADM Ethanol Plant Projects; Columbus, Nebraska & Cedar Rapids, Iowa as a Piping Detailer for the Piping Fabrication Shop. Fully Responsible for providing ISO drawings including support selection for the entire Evaporation Building utilizing AutoCAD 2009 by analyzing 2D design drawings, P&ID and Specifications. Worked with the rest of the Team to bring the Project to a successful close by providing ISO drawings for the Milling and Mash Prep Buildings by analyzing 3D Quick Pen Modeling drawings. Checked ISO’s and Pipe Spool (Flat Sheets).

Cairntron International – Shanghai, China 2004-2008
Senior Mechanical Design Consultant
Provided mechanical design and engineering support for various small industrial Paint Shop Systems. Assisted in bid document preparation, project execution, jobsite inspection of installations & research.

PAC – Shanghai, China 2004-2004
Senior Mechanical Design Consultant
Provided mechanical design and engineering support for new SGMW Paint Shop. Participated in Team Engineering with documentation support and Mechanical design consulting for Booths, ASH’s and Workdecks. Proposal support of new Phosphate & Elpo system for Holden, Australia.

Durr AIS – Wixom, Michigan 2002-2004
Senior Mechanical Designer
Provided complete drawing packages for fabrication & installation of Paint Finishing Systems. Provided layout and detail drawings utilizing AutoCAD 2002 with Xrefs. Coordinated with design & engineering throughout the course of the Decoma Project.

Paint Systems Engineering LLC – Clarkston, Michigan 2001-2002
Senior Mechanical Designer - CAD System Administrator
Provided complete drawing packages for fabrication & installation of Precious Metal Recovery Furnace and Paint Finishing Systems.
- Set up & maintained CAD System and Company Standards.
- 3D Modeling of Precious Metal Recovery Furnace utilizing AutoCAD 2002.

ABB Automation Inc. – Auburn Hills, Michigan 2000-2001
Senior Mechanical Designer
Responsibilities included Design management, Drawing, Detailing, Checking and working on special projects as the Lead Designer when required.
- Managed Design subcontract of Oven systems for Hummer Project.
- Provided layout and detail drawings utilizing AutoCAD 2000i and Solidworks.
- Checked design drawings & coordinated with design team thru out the course of the Hummer Project.

Trinity Automotive of America – Bingham Farms, Michigan 1998-2000
Senior Mechanical Designer - CAD System Administrator
- Set up & maintained CAD System and Company Standards with AutoCAD 14.
- Provided layout and detailed design drawings of Paint Finishing systems.

ABB Automation, Inc. – Auburn Hills, Michigan 1994-1998
Senior Mechanical Designer
- Lead Designer for LEPC, Volvo Chassis and Yang Feng Bumper Line.
- (13) Month International assignment in Shanghai, China to oversee Chinese design team.
- Provided layout and detailed design drawings for a variety of Paint Finishing Systems.

Haden, Inc. – Madison Heights, Michigan 1989-1993
Lead Mechanical Designer
- Design coordinator & Management for various projects including Saturn, Peterbilt, Kenworth, Key Plastics, and Dry Pure. Detailed design drawings utilizing Microstation software.

Air Industry - Troy, Michigan 1988-1989
Lead Mechanical Designer
- Lead Sheet Metal Designer for Phosphate and E-Cost systems for GM Plant in Montreal, Canada. Manual Drafting of General Arrangements, Equipment Layout and Detailed Fabrication Drawings.

Price-Westen – Warren, Michigan 1986-1987
Field Construction Coordinator
- Assigned to CPC-GM Framingham Assembly Plant, MA. Provided construction management for new paint shop installation including start up and de-bug. Responsible for coordination of construction activities with Sheet Metal subcontractor, review potential sub-contractors during the bid evaluation and clarification stages prior to contract awards.

Air Industry – Birmingham, Michigan 1984-1986
Lead Mechanical Designer
- Lead Designer provided design supervision for Spray booth and Clean Room facilities. Supported sales and estimating. Manual Drafting of General Arrangements, Equipment Layout and Detailed Fabrication Drawings. Followed Projects to completion including Construction and Systems Start up.

Zack, Inc. - Midland, Michigan 1982-1984
HVAC Field Engineer
- Provided on site resolutions for HVAC Ductwork systems installation due to interferences during construction of Nuclear Power Plant Units 1 and 2. Supervision of Mechanical sub-contractor, provided pre-inspection of systems prior to QC Final Inspection and acceptance.

IBM Corporation – San Jose, California 1982-1982
Mechanical Designer
- Contracted to IBM as a Designer for HVAC and Piping system modifications of Clean Room systems for research and development department. On site supervision of subcontractors during installation.

Bechtel Power – Midland, Michigan 1981-1981
Field Engineer
- Provided on site resolutions for Ductwork systems installation due to interferences during construction of Nuclear Power Plant Units 1 and 2. Liaison with head office design department to solve site generated technical/engineering queries.

GM Tech Center – Warren, Michigan 1980-1981
Mechanical Designer
- Performed Design modifications for Plant Engineering of various piping and ductwork systems, in research and development department. Coordinated on site construction activities with GM installation subcontractors.

United Engineers & Constructor’s - Richland, WA 1980-1980
Field Engineer
- Provided on site Redesign of Ductwork and Supports to satisfy seismic, thermal and load design criteria during construction of nuclear Units 1 and 4. Walk down and Field Measurement of Systems.

O.Germany, Inc. – Warren, Michigan 1976-1980
Mechanical Designer
- Designed and drafted duct and piping systems for a variety of GM assembly plants. Manual drafting of Boiler Room and Waste Water Treatment Layouts.

EDUCATION
Orange Coast College, Costa Mesa, California
Art & Illustration Major

Lake Superior State, Sault Ste. Marie, Michigan
Liberal Arts

Central Michigan University, Mount Pleasant, Michigan
Liberal Arts

SOFTWARE
AutoCAD, Microstation and Solidworks

Personal and professional references furnished upon request.

[Guest]

RESUME

Name: Sarath.C.RPhone: 09370935497

Objective: Challenging position in growth oriented organization which offers
diverse job responsibility in Piping Engineering using my technical
Skills.
Educational Qualification: -

1) Post Diploma in Piping Engineering:
Passed from Suvidya Institute of Technology, Mumbai, with Distinction (81.2%), in 2009.

2) Diploma in TOOL & DIE Making:
Passed from NTTF-cochin, Kerala, with First Class (70.5%), in 2003-06.

3) H.S.C.:
Passed from SREE BUDDHA CENTRAL SCHOOL, Kollam, Kerala.
With second Class (54%), in 2001-02.

4) S.S.L.C.:
Passed from LOURDEMATHA HIGH SCHOOL, Kollam, Kerala,
With First Class (74%), in 1999-00.

Technical skills

- Proficient in piping isometry.
- Proficient in MTO and selection of piping commodities.
- Proficient in developing pipe rack.
- Knowledge in development of equipments and piping layouts.
- Knowledge of P&ID, equipment data sheet, hook up etc.
- Familiar with international design codes & standards like ASME, ANSI etc.
- Familiar with basic part of stress analysis to route lines.
- Familiar with inspection and testing procedure of piping system.

Computer skills

- Autocad-2004/2006/2008.
- CAESAR-II (Data entering & modeling).
- PRO-E wildfire V2 (2 Month training from CADD CENTRE, Cochin, Kerala.).
- MASTER CAM V5 (2 weeks training from DOEACC, Calicut, Kerala.).
- Working Knowledge of MS OFFICE.

SITE VISIT: As the part of training for Piping engineering, I visited Petro-chemical plant, GANESH UNHYDRIDE, Tarapur, Maharastra.

- WORK EXPERIENCE: -

Organization: WARADE TOOLS PVT LTD.

Designation: PPC Engineer.
Duration : From October 2007 to October 2008.

Work summary:-
1Process planning of all the projects.
2Study Die Design to check feasibility to manufacturing & order specified raw material.
3Decide sequence of operations & job priority.
4CNC & conventional machine planning.
5Machining offloading.
6Trouble shooting while manufacturing process.
7 Completely involved in establishing the Departmental procedures, work for
ISO 9001-2000.

Organization : JYOTI TOOLINGS PVT LTD

Designation: Trainee Tool Room Engineer

Duration: From July2006 to July 2007.

Work summary:-

1Daily work scheduling for Tool room.
2Study Die Design & give guidance & inputs to die makers.
3Work scheduling for machines.
4Documentations for ISO.
5Supervision of the project.
.

- OTHER ACHIEVEMENTS
Member of Quality circle (QC) Team “Navaratnas”, which won Excellent award in NCQC-2005 held at Cochin.


Professional Attributes
- Skilled in Task Management, Man Management and Project management
- Ability to work for the best improvement of the company under pressurized conditions.
- Excellent analytical skills
- Able to work within in the framework of established workplace regulations and Policies
- Good communication skills.

References: can be produced on demand.

Personal Details
Name: Mr. Sarath.C.R.

Date of Birth: 03rd October 1984.

Marital Status: Single.

Sex: Male.
Nationality : Indian.

Language known: English, Hindi, Malayalam, Tamil.

Permanent Address:Chandramangalam,
Puthenthura.P.O.
Neendakara, Kollam,
. Kerala, India.
Pin- 691588
Phone No: 04762685997.
Mobile No: 09370935497.


E-mail: sarath4sarath@yahoo.co.in
Alternate E-mail : sarath4sarath@gmail.com
Pass port No : G 4124108 Issue date : 03.08.2007
Expiry date: 02.08.2017

I hereby declare that the information given above is true to the best of my knowledge and I would render my services to the best satisfaction of my employer.

Date: 14.04.2009
Place : Mumbai. Mr. SARATH.C.R.

[Guest]

RESUME

R.GOPINATH Mailto:r.gopinath.be2007@gmail.com
(BE - Mechanical) Ph.no: 999 411 4604.

Objective
To work as a key player in a challenging environment with innovation, contributing to achieve the goals and grow with the organization.
Work Experience
THREE years of total experience in designing, in that TWO YEARS Experience in drafting, detailing & modeling of heavy industrial structural for industrial application.
Software Proficiency
AutoCAD : 2D Drafting, 3D Modeling
Pro/E-Wildfire 2.0 : 2D Drafting, 3D Modeling & Assembly
Solid works : 2D Drafting, 3D Modeling & Assembly
Autodesk Inventor : 2D Drafting, 3D Modeling & Assembly
MS-Office : Word, Excel & PowerPoint
Current Employer:
Organization : Bharat Heavy Electricals Limited., Trichy. Internal Expansion
Employee mode : ON CONTRACT
Duration : Nov2009-Till date
Designation : CAD Engineer
Software Used : AutoCAD2007
Responsibility :
• Understanding the requirement and inputs
• Preparing General Assembly drawings of Top Guard (Sun roof)
• Preparing detail drawings of Column, beam, bracing ,support and purlin
• Preparing Layout drawings
• BOM generation using the in-house designed tools.
Added Responsibility:
• Drawing standardization
• Preparing standard connection drawing
• Preparing calculation sheets using Excel
Previous Employer:
1) Organization : GDES PVT LTD., Madurai
Duration : Sep2008-Nov2009
Designation : CAD Engineer
Software : Smart sketch 5.0
Project : Preparing SIGN BOARD drawings for the client IHS Inc. - USA
Responsibility :
• Understanding the layout and preparing the data sheet
• Uploading data in IBM AS-400 data server
• Fine tune the drawings prepared by smart sketch
• Preparing the non standard drawings in smart sketch

2) Organization : Sri Vishnu Magnetics & Electronics Pvt Ltd., Chennai.
Duration : Aug2007-Aug2008
Designation : Drafter
Responsibility :
• Preparing 2Ddrawings for GA.
• Convert Paper drawings to AutoCAD drawings.







Education
Master of Business Administration (Distance Education)
Currently in Madurai Kamaraj University, Madurai.
2003-2007: Bachelor of Engineering in Mechanical

Personal Details:
Father’s Name : K.Rajendran
Date of Birth : 28/04/1985
Languages known : Tamil, English
Marital Status : Single
Address : 2/216(A), P.K.M-Nagar,
3rd, Street, Vandiyur,
Madurai-625020.

Declaration:
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Place :
Date : (GOPINATH.R)

[Guest]

RESUME
A.EZHILVANAN
Email : ezhilbeeie AT gmail.com
OBJECTIVE :
A challenging position in an organization where my technical and analytical skills would be applied for the betterment of the organization.
PROFESSIONAL WORK EXPERIENCE
1. RANGA CONTROLS PVT LTD., CHENNAI SINCE : JULY 2008 TO TILL DATE
DESIGNATION - INSTRUMENTATION ENGINEER
FIELD - DESIGN AND DETAILED ENGINEERING
- Involved in detailed engineering, reviewing and validating process data
- Reviewing and annotating Piping and Instrument diagrams, generating wiring drawing/details, preparation of cable layout / routing drawing, Instrument location layout.
- Checking of Inter-Disciplinary drawings like Piping Isometrics and Vessel / Column trim drawings.
- Co-ordination of project activities, by interacting with people of various levels in various departments.
DEPUTATION :
Saipem India Pvt Ltd, Chennai November 2010 to October 2011
DESIGN TOOLS :
Smart plant Instrumentation - INTOOLS (7.3)
INSTRUCALC - Calculation software.
AutoCAD 2008, Exposure to Micro Station.
MS Office, other Programming Languages
JOB DESCRIPTION :
- Preparation of Instrument Index using Intools.
- Preparation of Instrument Datasheet (Pressure Gauge, Level Gauge, MOV, On/Off Valve, Pressure Safety Valve, Ultrasonic flow meter, Mass flow meter).
- Preparation of Instrument Layout.
- Preparation of Pneumatic Layout.
- Preparation of Cable Schedule, JB Schedule, Loop Schematics.
- Preparation of Enquiry Specification for various Field Instruments.
- Sizing calculation for Pressure Safety Valve.
- Reviewing vendor drawings, QAP and Inspection Test plan.
- Technical bid evaluation of field instruments (Pressure Gauge, Level Gauge, MOV, On/Off Valve, Pressure Safety Valve, Ultrasonic flow meter, Mass flow meter).
- Estimation of MTO for Erection activities.
- Checking of Instrument List, I/O List, Loop Schematic and Junction Box Schedule.
MY JOB DESCRIPTION IS AS BELOW
1. Detailed Engineering Activity for Carbon Block Expansion Project
- Preparation of Instrument Index
- Preparation of Input / Output List
- Preparation of Cable Schedule
- Preparation of Hook up drawings and BOQ
- Preparation of Instrument Location Plan
- Preparation of Junction Box Schedule
- Preparation of Loop drawings
- Vendor drawing review
2. Detailed Engineering Activity for ANALYZER HOUSE – MANNAITECH – CPIC – DAMMAM
- Preparation of P&ID
- Preparation of General arrangement Drawing for Analyzer Shelter
- Preparation of Analyzer Tubing Hookup, Header routing Layout and BOQ
- Preparation of Panel & Junction Box termination details
- Preparation of Data Sheets – Pressure gauge, Temperature gauge, Differential Pressure Switch
- Vendor drawing review
VI – MICRO SYSTEM PRIVATE LIMITED SINCE AUGUST 2006 – JULY2008
DESIGNATION - CUSTOMER SUPPORT ENGINEER
FIELD - PLC & DCS
JOB PROFILE - Installation, Programming & Demo.
My job description is as below
- Hands on experience in handling the DCS (Ge-Fanuc).
- PLC Programming (Ge-Fanuc, AB, Siemens).
- Process Screen Development using SCADA. (Flow, Level, Temperature, Pressure)
- PLC Course Handling.
- PLC Based Project Guidance.
EDUCATIONAL DETAILS
COURSE/
CLASS
INSTITUTION STUDIED BOARD
OF STUDY YEAR OF
PASSING % MARKS
B.E
(Electronics & Instrumentation) Muthayammal Engineering College, Rasipuram. Anna
University
(Chennai) May 2006 73
Diploma(EIE) Salem Polytechnic
College, Salem. Director of Technical Education April 2003 85

[Guest]

Dear Sirs,
I am Raja. I have completed my B.E(Mechanical Engineering) and completed by 1 Year training in BHEL,Trichy.
Kindly let me know if you have any opportunities in your surroundings.
B. RAJA
Email : kpr.king11 AT gmail.com

OBJECTIVE
To acquire the best knowledge in the field of Mechanical Engineering as an Engineer, I wish to improve on my creativity as well as other innovative skills and to pursue a challenging career in a progressive organization with an active involvement to achieve goals mutually.
EXPERIENCE
Successful Completion of One Year Graduate Apprentice Trainee (GAT) in Bharat Heavy Electricals Ltd., (BHEL), Tiruchirappalli, Tamil Nadu from 21stSep 2010 to 20th Sep 2011.
JOB PROFILE
- Visual examination of all welds and carrying out proper NDT as per customer approved NDT plan.
- Ultrasonic Equipment Calibration.
- Magnetic particle testing equipment Calibration.
- Yoke Calibration.
- Inspecting material composition using Spectrometer.
- Evaluating and interpreting Radiographic films of the pressure parts, structural.
EDUCATIONAL QUALIFICATION
Bachelor of Engineering (Mechanical Engineering)
- 3-Years regular Stream (2007-2010) from E.G.S PILLAY ENGINEERING COLLEGE, Nagaipattinam (Affiliated to Anna University –Chennai) with 73.12% ( FIRST CLASS) of marks.
Diploma in Mechanical Engineering
3-Year regular stream (2004-2007) from AVC Polytechnic and Engineering College, Mannanpandal, Mayiladuthurai With 80.12% (FIRST CLASS WITH HONOURS) of marks.
HIGH SCHOOL
- In Year 2004, Passed S.S.L.C in Sambandam Higher Secondary School, Sembanarkovil with 74% of marks.
PROFESSIONAL QUALIFICATIONS
Certifications and Accreditations
- Successful completion of LEVEL II (involving PT, MT, RT, and UT) in GB NDT ENGINEERING SERVICE) at , TIRUCHIRAPPALI .
Computer Proficiencies
- Programming Language : MS-Office and SAP,SOLID WORKS
- Packages : AutoCAD
PROFESSIONAL AFFILIATIONS.
MAIN PROJECT
Project Title : EFFECT OF ETHANOL EMULSION ON DIESEL ENGINE
Main Aim of this project is to control the emission and blending for Ethanol & Diesel fuel and operate the diesel engine

[Unregistered]

I am having 6years experience in thermal power plant Critical piping and also power cycle piping in combined cycle plant means Gas and Steam generation plant .in the last year 2012 I have successfully completed hydro test and steam blowing and normalisation of all the steam lines in combined cycle is their any vacancy for job