Weaving Manager Indonesia : HPG Global

[Rajkumargautam]

HPG Global Indonesia : Weaving Manager - Indonesia.

Designation: Weaving Manager - Indonesia.
Experience: 8 - 10 Years
Location: Indonesia

Job Description:
To head the weaving unit having 200 Air Jet machines of Toyota and Pickanol working on grey fabrics. Should have experience weaving preparatory etc. Should have experience of maintenance and quality.

Desired Candidate Profile:
Degree / Diploma in textile with 8-10 years of experience of working as weaving manager on air jet machines on 100% cotton and blends in grey.

Company Profile:
Most reputed group having different textiles units in Indonesia having spinning and weaving facilities.

Email Address: hpgupta@hpg-global.com
Website: http://www.hpg-global.com

Keywords: Weaving Manager

[Guest]

Reference ID:
Weaving Manager - Indonesia.

29/03/09

FROM,
R.SREENIVASAN.
2/900 –B1, MOOVENDAR NAGAR
BAGALUR ROAD
HOSUR -635109
TAMIL NADU


DEAR SIR,
Given to understand that there is a requirement of a Senior person to take care of a new installation, I would like to apply myself for this post. At present I am working as a General manager in a reputed organization at Hosur taking care of the entire plant of 100 % EOU.

Earlier I was working as a Weaving manager in Premier mills ltd for the past 22 years. Then as GM operations for two years in Summer India Textile mills. With this strong work base in weaving and wide experience in home textiles from planning to production and with customer handling, I am sure that I will fit into your organization to meet your requirements.

With my abundant knowledge I have accomplished many things in my career. As a team leader, I can motivate the given team with a vibrating energy to produce the best results in short duration.

Hope I will certainly fit into the requirements and I am sure that I can fulfill the expectations of the management in all the ways within the stipulated time. I shall always find the ways and means to enhance the performance levels with the available resources.

Request to keep in confidence.

Thanking you,

With regards,


( R.SREENIVASAN)
BIO – DATA
Name : R.Sreenivasan.
Date of birth : 22nd May,1959
Age : 49 years
Contact no : 94433 84738
Mail id : vasan_59@yahoo.com
Qualification : Diploma in Textile technology
Institute : Thiagaraja Polytechnic, Salem
Present position held : General Manager
Passport : G 0657630
Languages known : Speak – Tamil, English,
Telugu, Hindi.
Write - Tamil, English

Previous Experience :
1979 – Century mills,Bombay
1980-81–Tata Textiles ltd, Bombay
From 1982 – July 2003 Premier mills ltd , Hosur
July,2003 – May 2005 Summer India Textile mills(P) Ltd
June 2005 till date ER Textiles Hosur

WORK EXPERIENCE:
Weaving Preparatory:
PRODUCTION AND MAINTENANCE OF THE FOLLOWING MACHINES
- BENTRONIC SECTIONAL WARPER
- BEN DIRECT WARPER
- BEN SIZETEC SIZING MACHINE

Loom shed
- PRODUCTION AND MAINTANENCE OF SULZER PU MACHINES AND P7100 MACHINES ,P 7150 WITH DOBBY AND JACQUARD
- SULZER TRAINING IN 1999 AT BOMBAY FOR PU MACHINES
- CAN HANDLE THE STAUBLI KNOTTING M/Cs AND MAINTAIN PC VERSIONS MACHINES IN PERFECT CONDITION.
- TOYATA AIRJET WEAVING MACHINES JAT 610 MODEL

PRIME RESPONSIBILITY IN THE EMPLOYMENT
1. TO ASSURE THE QUALITY OF THE YARN / FABRIC THAT IS BEING PRODUCED / PROCESSED AT EVERY STAGE OF PRODUCTION.
2. TO MAINTAIN THE QUALITY LEVELS OF THE PRODUCTION AND TIMELY DELIVERY.
3. MAINTAIN THE MACHINE CONDITIONS TO PRODUCE THE BEST QUALITY PRODUCTION.
4. MARKET SAMPLE FABRICS ANALYSIS AND FINDING OUT FEASIBILITY OF PRODUCTION.
5. NEW PRODUCT DEVELOPMENT.
6. CO-ORDINATING WITH EXPORT AND DOMESTIC MARKETING DEPARTMENT.
7. PROBLEM SOLVING.
8. JOB PROCESSING OF MADE UP FABRICS
9. STITCHING UNIT WITH 200 MACHINES
10. HANDLING CUSTOMERS VISITING MANUFACTURING UNIT.
11. REPLYING CUSTOMERS QUERY
12. GENERAL ADMINISTARTION
13. UTILITIES

EXPERIENCE IN THE FOLLOWING CLOTH PRODUCTION WEAVING:
1. HOME FURNISHINGS .
2. YARN DYED SHIRTING VARIETIES
3. MADE-UPS.
4. DAMASK FABRICS.
5. DESK LOOM SAMPLE PREPARATION.
6. DOBBY WOVEN DESIGN FABRICS.
7. JACQUARD WOVEN DESIGN FABRICS
8. LIGHT,MEDIUM AND HEAVY COTTON FABRICS..
9. COTTON VOILES.
10. POLYESTER VOILES.
11. DYED &, PRINTED – COTTON AND BLENDED FABRICS.
12. FINE COUNT SHIRTING VARIETIES

ACHIEVEMENTS IN THE CAREER
IN THE TOYOTA AIRJET WEAVING MACHINES, THE NOZZLE BANK ARRANGEMENT WAS MODIFIED THEREBY REDUCTION IN THE AIR CONSUMPTION TO THE TUNE OF 8 TO 10 CFM PER MACHINE WAS ACHIVED. THIS HAS RESULTED IN A HUGE SAVING OF RS 75 TO 80 LACS PER ANNUM AND PURCHASE OF ONE COMPRESSER WITH A CAPACITY OF 1500 CFM WAS AVOIDED

[mg20361@mail.com]

I have maintenance Line Exp 30+ yrs.
CURRICULAM – VITAE
H.MOHAMED GHOUSE 3/12, Ganga Vihar,
KDA colony,Jajmau,
KANPUR. (UP) 208010.
INDIA.

Tel : 91-9198647996
E.Mail :mohamedghouseh AT ymail.com
mg20361 AT gmail.com
Objective
Looking forward to challenging and competitive work atmosphere leading to a professional experience technical achievement.
Summary of Experience
· Having 30 years experience in the Maintenance of all types of Machineries
· Installation and Maintenance of all types of Leather, Foot Wear & Garment machineries.
· Trouble shooting and rectifying of any problems arising production area and in the shop floor.
· Correct setting of machines and correct usage of tools and attachments for different types of fabric and garments.
· Installation and Maintenance of all types of Treatment Plants.
· Installation and Maintenance of HV & LV Panels.
· Honest, Hardworking, Loyal and Energetic.
Experience
v Company : Super House Ltd. Unnao, Kanpur

Position : SR.Manager –Maintenance
Period & Duration : 2009 – 2010
v Company : Kwun Tong Apparels Ltd ( Bangladesh)
Must Garments Group Hong kong
Position : Manager –Maintenance
Period & Duration : 2008 – 2009
v Company : Pearl Global Ltd
Position : Manager -Maintenance
Period & Duration : 2008 – 11 Months
v Company : Celebrity Fashions Ltd
Position : Manager -Maintenance
Period & Duration : 2005 – 2007
v Company : Intimate Fashons (I) P Ltd.
Position : Chief Engineer
Period & Duration : 2001 -2005
v Company : Chevro Leather Manufactures
Position : Maintenance - Engineer
Period & Duration : 1993 –2001
v Company : Habiba Sewing Services
Position : Chief Executive
Period & Duration : 1990 –1993
v Company : Leather Machinery Corporation (PFAFF
Industrial Sewing Machines)
Position : Service Engineer
Period & Duration : 1984 -1990
Position : Electrical Assistant Engineer in Saudi Arabia
Period & Duration : 1982 –1984
v Company : Farida Shoe, TAW ,SSC Shoes
Position : Maintenance In charge
Period & Duration : 1978 –1982
REFERENCE
1. Mr. Amit Rai 4. Mr.Richard
DGM- Operations Production Manager –Sales Technical,
Celebrity fashions ltd Brother International, Chennai.
Chrompet. Chennai. Mobile:9840072979.
Mobile: 9840946468

2. Mr. Vijaya Raghavan 5. Perkinian
VP. Finance – Commercial, GM Operations,
Celebrity Fashions Ltd, Leania Fashions,
MEPZ. Chennai. MEPZ, Chennai.
Mobile : 9940197210 Mobile : 9840066800.

3. Mr. Ram, 6.Mr. Gaurav
Manager – Sales, GM Operations,
IIGM, Chennai. Pearl Global Ltd,
Mobile:9381066572. MEPZ, Chennai.
Mobile : 9940043105.
Technical Qualification
· Diplomo Mechanical Engineering (DME)
Computer Knowledge
· Computer Basic, D-base, WordStar
· Working knowledge of MS Office
· Working knowledge of stage 4.0 and Proman Software package
Additional Qualification
· Undergone training program in Fire Safety and First Aid
· Done a course on Garment & Leather / Shoes Machineries.
· Undergone a 3 month Training in PFAFF- Germany.
· Undergone a 2 month Training Gabor Shoes & Fashions, Austria.
· Undergone a 2 month Training in Garment machines in Body Line , Srilanka.
Responsibilities as a Maintenance Manager
(I) Installation and Maintenance of all types of Garment Sewing Machineries like.
· Single needle machine (Brother, Juki , Singer, Pfaff, Consew, etc.,)
· Double needle machine (Chain stitch & Lock stitch –All models)
· Feed of the Arm (Twin needle & Triple needle)
· Edge Trimmer (All models)
· Button hole machine (All models)
· Button stitch machine (Lock stitch with Trimmer and Electronic Program machines.
· Over lock machine (Thread & Five thread – All models)
· Kansai Special machine (Different gauge sets : 1 ½ ” , 1 ¼ , 1” , ½”
· Union Special machines (All models)
· Flat Lock machines (knitting - All models)
· All types of Leather & Leather Garments, Shoes Machineries.
· Leather Hydralic Press, Skiving M/C, Splitting M/C, Stamping M/C, Fusing M/C,
Grimping M/C, Postbed, Flatbed, All Special Typeg’s of Sewing M/C,s & Bottoming M/C, Etc..
· Computerized Single Needle machine (Can program machine for different operations like Pocket welting, Label attaching , Flap making and Sleeve placket making.)
· Pneumatic machines like Pocket creasing, Collar creasing, Collar pointing, Cuff turning, Pocket welting, Maier blind hem, Surging over lock, Key hole with programmable machines and modsu pattern Swear machines.
· Installation and Maintenance of Band Knife machines.( All models)
· Installation and Maintenance of all types of Fusing machines like Hashima, Kanneigiessor, Veit and Ngai Shing machine.)
· Maintenance of all types Snap Button Machines.
· Installation and Maintenance of Fabric cutting and checking.
· Special machines like Durkopp Adler Pocket welt, Sleeve attaching and surging machines.
(II) Installation and Maintenance of all types of Garment Finishing Equipments
and Machineries like
· Installation and Maintenance of Electrical Portable steam boiler.
· Installation and Maintenance of Automatic packaged Thermax Steam boilers – All types.
· Installation and Maintenance of Thermic Fluid boiler –All types
· Installation and Maintenance of Laundry washing machines like Ramsons and Ngai Shing.
· Installation and Maintenance of all types of Hydro Extractors.
· Installation and Maintenance of Tumble Driers like Oil, Steam and Electrical models.
· Installation and Maintenance of all types of Suction Stem Ironing tables and Inseam Busters with iron boxes.
· Installation and Maintenance of Thread Sucking machines.
· Maintenance of Needle Detectors.
· Installation and Maintenance of Sand Blasting Equipment for Trousers.
·
(III) Installation and Maintenance of all types of Water Treatment Plants with
Water Pumps like.
· Washing Water plant
· RO Drinking Water Treatment Plant
· Sewage Water Treatment Plant
· Boiler Softener Water Treatment plant
· Maintaining of Water Analysis Report and Daily water test log books.
· All types of Overhead water pumps.
· Deep well water pumps
(IV) Installation and Maintenance of all types of Pneumatic and Hydraulic
machineries like
· Air Driers
· Compressors (All models-2HP to 60HP)
· Vaccum pumps
(V) Fabrication of following works
· MS Pipe lines (Water, oil and Air Lines)
· SS Pipe lines (Hot & Cold Water, Air Lines)
· GI pipe Lines (Hot & Cold, Air Lines)
· Others Sheet Metal and MS fabrication works
(VI) Tool Room Maintenance like
· Lathe machine
· Drilling machine (Portable & Heavy duty)
· Grinding machines
· Power hacksaw Cutting machine
(VII) Installation and Maintenance of Electrical areas like
· Transformer with OLTC (100 to 1500KVA)
· Diesel Generator (2 KVA to 6oo KVA)
· HT Breakers (Oil & Vaccum)
· Power Factor Controller Systems
· Capacitor banks
· HV & LV Panel boards
· Stabilizers
· Water Heaters
· Maintaining of daily EB reading logbooks and Electricity bills
(VIII) Installation and Maintenance of Safety Systems like
· Fire Alarm
· Fire hydrant systems
· Fire Extinguishers
· Conducting Fire Safety training program and Mock drills
· Conducting First Aid training program
· Maintaining of Fire Alarm test logbooks and Fire Extinguishers service logbooks
(IX) Installation and Maintenance of Air conditioning Systems like
· Window type Air –conditioning System (LG, Whirlpool, Daiken)
· Wall mounted Split Air conditioning system (Daiken, Hitachi, Bluestar and LG)
· Ductable and Ceiling Suspended Split Air conditioning Systems (Blue star)
· Cassette type Ceiling suspended Air conditioning System (Blue star, Daiken and LG)
· Floor mounted Split Air-conditioning System
(X) Systematic File maintenance and Reports like
· Preventive machine Maintenance Schedule
· Break down Maintenance record
· Machine History record
· Machine Broken Needle record
· Stitch per inch record
· Special machine program setting record
· Machine Emergency requisition reports
· Monthly machinery stock report
· Monthly production report
· Monthly Fuel and Electrical power Consumption report
· Logbooks like boilers, Gensets and Treatment plant
· High pressure vessels calibration record
· Daily Mechanic and Electrical reports
· Record of different types of machine accessory items like pressure foots, Folders, Gauge sets, Electrical and others mechanical spares.
· Calibration Record for Measuring tapes and Steel rule.
(XI) Expert and Speedy rectification of any problems arising in shop floor and
Preventing any major problems by doing preventive maintenance. Also ensuring
the time taken for Break down maintenance is very low and thus enabling
speedy production by keeping machine down time is low.
(XII) Correct setting of machines by dismantling the required RPM of machines,
Stitch density and correct usage of tools and attachments for different types of
Fabric and garments.
(XIII) Updating machine transaction and Spares inventory of materials to others
factories are through using in software package.
PERSONAL
NAME : H.MOHAMED GHOUSE
DATE OF BIRTH & AGE : 20.03.1961 (49 Years)
FATHERS’S NAME : C.M. HABIBULLAH (Late)
FATHERS’S OCCUPATION : Rtd. Sub-Inspector Reserve Police
Vellore
MARTIAL STATUS : MARRIED
NATIONALITY : INDIAN – MUSLIM
LANGUAGE KNOWN : TAMIL, ENGLISH, HINDI & TELUGU
LMV LICENCE : 5393
PRESENT SALARY : 1500USD+Benefits
I hereby declare that all the information given above is true to the best of my knowledge.
Date : 09-10-2010
Place : Kanpur MOHAMED GHOUSE.H

[Guest]

I'm looking for a course in textile dyeing and printing only. Please let me know if possible and the cost. Elsa Young email address: elsa.bornfree@yahoo.com

[Guest]

Resume
Name - Neel Kamal verma
Educational qualification
a) High school (MP Board Xth Standard) 1998
M.P.board Bhopal Pass with 66.47%
b) Higher secondary exam. (12th standard) in year 2000-0 From MP board Bhopal pass with 57.17% with math subject
c) 3 years Diploma in textile technology from Shri Vaishnav polytechnic Indore (M.P.) Pass with 65.47% in year 2001-03
Training
1)15 days industrial training in Uniworth textile
2) One month training with Picanol GMMX erecter Mr. G.M. patel for maintenance, trouble shouting for Picanol Rapier machine
Machine Handle - Picanol Rapier Gama 4R and Gamex 6R, OPTIMAX and Toyota 710(Air jet).
JOB profile
1. Expert in trouble shooting of all type of damages and loom efficiency.
2. Overall working of production activities like quality setting Width adjustment during gaiting
3. Preparation of production report of each machine & manpower
4. Responsible for the man power handling and shift scheduling
5. Workers handling and divide their work according to shift requirement.
6 Attend starting mark, bump mark crack and all type of damage trouble shooting done.
7. When new quality starts checks all parameter and run with without damage.
Work Experience—
8 YEARS EXPERIENCE IN WEAVING
1) Raymond UCO denim PVT LTD (Yavatmal)
Duration- Nov 2005 to aug2009
Post- shift officer (O1)
2) Vardhman fabric
Duration-sep2009to march2011to till
Post- shift officer (O2)
3. Birla century (A unit of century textile and industries ltd)
As a Team leader.
From March-2011 to till now
Language known - Hindi and English
Salary excepted- as per company rule