PDS PDMS Piping Design Delhi/NCR Hyderabad Gurgaon : GS Engineering

[Admin]

G.S. Engineering, Gurgaon Delhi/NCR, Hyderabad / Secunderabad : Piping Design Engineer- Lead

Website: http://www.gsconst.co.kr/english

Keywords: PDMS, PDS, Piping Layout
Designation: Piping Design Engineer- Lead
Experience: 10 - 20 Years
Location: Delhi/NCR, Hyderabad / Secunderabad
Compensation:
Rupees 12,00,000 - 14,00,000
Education:
UG - B.Tech/B.E. - Chemical, Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 21 Jan

Job Description:
Piping Layout.
GA Drawing
Experience on PDMS or PDS Design Software

Desired Candidate Profile:
We have a opening at G S Engineering, Gurgaon.

Piping Design Engineer 5+ Years
Principal Design Engineer- Static Equipment 8 + Years
Principal Design Engineer- Rotating Equipment 8 + Years
Principal Engineer- Piping 12+ Years

Company Profile:
GS E&C has established its status as a top-ranking company domestically since its foundation in 1969 by achieving tremendous growth in the fields of architecture, civil engineering, housing, plant, environment and power plant.

Executive Name: Aijazuddin ( aijaz@aarviencon.com )

Address:
Not Mentioned

Telephone: 9999368378

Reference ID:
01

Keywords: PDMS, PDS, Piping Layout

[alok_bncoe2005]

COVERING LETTER
Dear Sir,

I would be great full to attend an interview from your organization for the post of PIPING ENGINEER , I am submitting Resume for your kind consideration. I would like to build up my career through your esteemed organization. If I will be given a chance, I can work my best.
Please find enclosed my resume showing my education, experience, and background.

Thanking you Sir,

Yours faithfully,
(alok kumar)
9350411389



CURRICULUM VITAE


BE MECHANICAL ENGINEERING, ALSO DONE 3 MONTH TRAINING IN PIPING ENGG.

ADDRESS:
ALOK KUMAR N-20, JAGAT RAM PARK,
kumarmacho2008 AT yahoo.comLAXMI NAGAR
DELHI-110092
[EMAIL="macho2008 AT rediff.com"]macho2008 AT rediff.com
Mob.no-+919350411389


Career Objective:
To use my knowledge in best possible way and contribute to the growth of the organization and to get a challenging career in the field where there is opportunity to learn more.

Educational Qualifications:



Degree Qualifications

Course: Bachelor of Engineering.
(MECHANICAL ENGG.)

University:SantGadgeBabaAmravatiUniversity, Amravati.
Institute : B.N. college of Engineering, Pusad, Dist:-Yavatmal (M.S.)

Degree percentage :- 63.00%


Project in final year:

Advance air filter in diesel engine: We made the improvement in diesel engine by attaching an electromagnetic air filter which help in reducing fuel consumption and increasing efficiency of an engine.


Seminar :

Solar& Refrigeration system
Personal Strength:

Quick learner, Hard working ,Team Spirit, Man of words, Good Motivator.

TECHANICALSKILLS:
Languages : C
MS OFFICE , EXCEL
CATIA V5R16 (SOFTWARE)
AUTOCAD
PIPING DESIGNING(PIPING ENGG.)
MICROSTATION, PDMS

INTERESTED AREA

CONSTRUCTION FIELD
POWER PLANT
REFIENERY PLANT
CHEMICAL INDUSTRY
OIL AND GAS PLANT
PRODUCTION DEPARTMENT
MANUFACTURING DEPARTMENT



HOBBIES


Playing volleyball, basketball, singing songs.


My Achievement:

Ø Gaiety 2009 Volleyball winner.(captain)
Ø Gaiety 2009 Basketball winner. (captain)
Ø National winner of volleyball 1999
Ø Playing national in volleyball in 1999-2000& 2001-2002
Ø Representing in university games in basketball & volleyball


Extracurricular activities:

Ø Member of MESA

Personal Profile:
Name : Alok Kumar
Father’s Name : Sri Ram Sagar Ram
Date of Birth : 01/10/1985
Sex : Male
Marital Status : Single
Nationality : Indian
Hobbies : Listening song, playing Cricket & Volley Ball & Volleybal
Permanent Address : C/o:Sri Ram Sagar Ram
Sector-6/d, Qr no.-2346
Bokaro Steel City, Jharkhand
Pin-827006
Present address : N-20, jagat ram park, Laxmi nagar
Delhi-110092

Phone No. : +919350411389




Declaration:
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.


Place: Bokaro Steel City Alok kumar

[prabhat_bond]

Prabhat Kumar
Mobile: +91 9998987796 ~ Ph. (Res.): 0228 – 6617968
E-Mail: prabhat.kr.jha AT gmail.com
Date: dd/mm/yy

To,
The HR Manager,


Dear Sir/ Madam,

I am writing to express my interest in the Piping Engineer as mentioned in the Indain Job Talks Forum

I have 3+ years of experience in the areas of Plant Layout, Piping Design, Support Design, Invitation to Bid for Proposal. Review of my credentials will confirm that I am capable of achieving organisation’s objectives and organic growth through effective contributions.

At present I am associated with Reliance Engineering Associates Pvt. Ltd., Jamnagar (Jamnagar Export Refinery Project) as Piping Engineer.

In addition, I possess good skills in communication, presentation with demonstrated abilities in leading motivated teams to achieve organisational goals.

My detailed resume is enclosed for your reference. I believe my knowledge and skills will bring value to your organisation and would welcome the opportunity to meet, discuss and explore the possibilities of the same.

Thanking you

Sincerely,



Prabhat Kumar

Enclosure: Resume

[Guest]

Resume

Harshal P. Bhanej

34, “Renugaj” Sonal Vatika Soc, Nr. K.B.Parikh school, Ajwa Road, Vadodara, Gujarat, India.
Phone : (091-265-6583790) Cell No : (09873922782) Email : harshalpbhanej AT yahoo.co.in

Personal Details
Name : Harshal P. Bhanej
Birth Date : 22nd July 1982
Language Command : Marathi, English, Hindi & Gujarati
Abroad Visit : Sept 2007 to Dec 2007 USA
Passport Information : Valid up to 21st March 2016
Visa Information : 10 years Multi Entry Business Visa

Career objective
Looking forward a highly challenging, knowledge gaining & growth oriented career in Design & Detail Engineering field of Power/ Process Plant & Refinery Engineering Applications.

Academic Qualifications
- Diploma in Mechanical Engg. In May 2002, M.S. University, Vadodara, Gujarat with Distinction.
- Higher Secondary ( 12th Std.) from Gujarat State Board in March 1999, with Second class.

Computer Skills
- Proficient in PDS Piping Software.
- Proficient in PDWB Piping Software, CADMS (General Piping Composite)

Core Competencies
Power Plant Engineering Design & Detail Engineering Experience in preparation of
- Developing Piping Layout, Equipment Model & Isometric for the project per checklist in line with process & standards for Combined Cycle Power Plant as per ASME B31.1 & process plant details as per ASME B31.3
- Vendor drawing review.
- Basic Plot Plan, Equipment Layout, Pipe-Rack Layout.
- Material Take-Off/ Bill of Material (BOM) Control & preparation of requisition for procurement.
- Piping study & preparation of Piping General Arrangement drawing.
- Preparation & checking of piping Isometric with BOM.
- Detailing of Pipe Support with sub-structure, hanger selection & BOM preparation.
- Generation of Above and under ground Piping Composites.

Professional Synopsis
- Total 7 years Experience in Power & Process Plant Piping DESIGN using PDS & PLADES-2000 software, respectively in present & previous organization.

Present Employer
Fluor Daniel India Pvt. Ltd.
Duration: August – 2006 onwards Cadre: Designer

Project Assistance
o OJSC Niznekamsk Refinery and Petrochemical complex – TANECO Russia. (GREEN FIELD)
- Working in SULFER RECOVERY unit and preparing piping for the respective area.

o 1634 MW Oak Grove Super Critical Power plant – TXU Texas.
- The project is a nominal 1634 MW super critical Lignite Fired Power Plantand it will have the lower Sulfer Dioxide, Nitrogen oxide and mercury emissions in U.S. and 80 percent cleaner than the average U.S. coal plants.
- Feed water system (Area Lead)
- Handled Underground piping and Turbine area piping.

Previous Employer
M/s. Larsen & Toubro – Sargent & Lundy Limited, Vadodara, Gujarat – India.
(An ISO 9001-2000 Company)
Duration: October - 2002 to August-2006 (Campus Selection)

“L&T Sargent & Lundy Ltd.” Is a joint venture of two leading organizations Lasren & Toubro Ltd., India and Sargent & LundyLLC , U.S.A.
The leading Engineering Consultant for Power sectors.
Project Assistance
o 500 MW Poletti Combined Cycle Plant – New York Power Authority
- Appointment of our unit as the consulting engineer for 800 MW combined cycle project for which GE is the EPC contractor, which involves our role for basic and detail engineering of the main plant portion. GE has offloaded integral equipment piping and interference engineering to the consulting engineer.
- Piping Support Drawings and Details generation and revisions for HP, HR, & LP steam systems.

o ORC 2 x 18.5 MW Cogen Power Plant
- Involvement of our unit in the project for study and to analyze the proposed power block area location with out much affecting refinery processes.
- Plot plan arrangement and equipment arrangement /Reshuffling.

o IPCL Gandhar 90 MW : Fuel Gas conversion for IPCL
- Piping composite and Piping Isometric generation for gas line from IPCL battery limit to HRSG TPs.

Co-Curricular
- Building/ Unit Coordinator for Sports activities and cultural activities.
- Member of Executive body of L&T SPORTS CLUB.
- Elocution, Extempore speech, Drama competitions winner in school and collage age.

Declaration
I hereby declare that all above information furnished by me are true and correct to the best of my knowledge and belief.

Harshal P. Bhanej Date: _____________

[shri_hcst]

Respected Sir,
I am exploring the possibility of an opportunity to be the part of an organization. My objective is to grow physically and financially with the growth of the organization and in the process gain more knowledge. I am confident that my knowledge, skills and experience could make great contributions to the organization.
Details are as fallow:-
Name : Shrish Kumar Gupta
Email ID : shrish.kumar AT hotmail.com
Qualification: B.Tech (Mechanical Engg) in 2007
P.G.Diploma (Piping Design & Engg) from M.I.T.,Pune in 2009
Key Skills : Codes & Standard, Review of P&ID, Plot plans, Layout, GAD, Isometrics, MTO preparation, Stress Analysis
Software Skills : Auto CAD 2004., PDMS 11.5, CEASER II 5.0, Pro/E Wildfire 2.0., MS Office.
Exp. Salary : Negotiable
Therefore I would appreciate the opportunity to have a personal interview at your earliest convenience.
Thank you for your consideration and I look forward to hearing from you.

Yours sincerely,
Shrish Kumar Gupta
08010116020

[jenashwini]

cover letter


Dear Madam/Sir,

I am interested in applying for the PIPING DESIGN ENGINEER position. My resume is attached for your review. I am confident that my skills and past experience would make great contributions to your organization.
Thank you for your consideration and I look forward to hearing from you.

Yours sincerely
ashwini Kumar jena

Resume.


Mr. Ashwini Kumar Jena.
ashwinijena AT yahoo.com

PIPING DESIGN ENGINEER
Career Objective :

Looking for a challenging and demanding position in Piping Design and Engineering in a growth oriented Mechanical Consulting, Contracting, Construction organization to render professional skills and add value to organizational growth and objectives.

Software skills piping :

1. Piping Drafting : - PDMS 11.6, PDMS 12.
2. PDMS :- MODULES
(1) Equipment modeling
(2) Piping Modeling
(3) Draft
(4) Iso draft
(5) Structure modeling
(6) Support Modeling

Software skills :

1. Operating System known : Xp, Vista, Windows 7.
2. Office suites : Microsoft Word.

Academic Qualification :

- B.E (Mechanical Engineering) from GHITM PURI, ORISSA,2005
- Diploma in Process Piping Design/Drafting & Stress Analysis per ASME B31.3 Training from Institute of Piping Engineering and Building Services, Hyderabad,2008

Technical skills :

Knowledge of - PFD and P&ID
- Equipment drawings
- Plot plan
- Process plant layout

Job Experience :
- Organization : Silicon Engineering and consultants. (Hyderabad)
Duration : JUNE 2008 TO AUG’2010.
Job profile : piping design engineer

PROJECTS HANDLED
Project#1 :
Project : water treatment /gas scrubber area for hydrocarbon onshore plant
Role : Piping Designer
Software Used : PDMS

Responsibilities :

- Preparation of equipment layout for water treatment area (tanks &pumps)/flare area (knockout drums), providing tie in point co-ordinates to the pipeline department
- Providing civil information drawings (viz...Sleepers, foundations,) and civil loads
- Providing structural info drawings like operating platforms/N2 cylinder shed, pumpshed etc
- Design of piping layout for WTP area, pump layout and tank layout
- Design of flare system, blanket gas system and pilot gas system
- Performed study on pipe rack (width & no. of tiers calculation)
- Extraction of MTO report for at different stages OF PROJECT FOR purchase
And procurement
- Getting approval from client for special supports (spring hangers and other costly stuff etc)
Modeling points

1) modeling of equipments as per vendor data and routing of lines as per P&ID, PMS
2) checking of isometrics and GA drawings
3) modeling of supports for critical and noncritical lines
4) scheduling o isometrics as per client's schedule

Project#2 :
Project : Potable Water Generation Units (Das Island)
Role : Piping Designer
Software Used : PDMS

Responsibilities :
- Modeling of Equipment and Piping for different systems like, utility open drain and closed drain systems in PDMS.
- Modeling for tall tower. Ladder arrangement as per the specification.
- Nozzle orientation as per General arrangement drawings received.
- Structural modeling for temporary platforms and handrails.
- Data Consistency and Clash Checking for System
- Involved in Preparation of Equipment Layout.
- Involved in Preparation of Piping Layout.
- Modeling of pipe supports for non critical lines as per support span calculation.
- Modeling of pipe supports for critical lines as per stress isometrics.
- Extraction of isometrics.
- Extraction of MTO reports.


- Organization : SKF BEARINGS INDIA LIMITED, under ARS Associates
Duration : Dec. ’2005 to June ’2006
Job profile : Customer Support Engineer.

Job Responsibilities :
- Promoting various maintenance product & condition monitoring equipments of SKF.
- Provides solutions to the customer for the root cause of bearing failures in m/c.
- Building up healthy relationship between customer & SKF.
- Looking after the satisfaction of customer by up-dating them about the latest technology in SKF products & its benefits

- Organization : H.A.L (Hindustan Aeronautic Limited) Koraput Orissa
Duration : 16 Nov.’06 to 15 Nov. ‘07
Job profile : Apprenticeship Trainee

Job Responsibilities :
- Check the Quality of Oil & Fuel before and after Engine Testing.
- Inspect the parts of Engine for any Defects before & after Mounting.
- Also look after the parameters of the engine during testing.


Industrial Trainings/ Projects
- One month training as a part of curriculum at NALCO, Damanjodi in 2003.
- One month training as a part of curriculum at HAL, Sunabeda-2 in 2004.
- Study report on INVESTMENT CASTING.2004
- Study report on SUKHOI-30 MKI FIGHTER PLANE.2005
- Project on REFRIGERATION TO INCREASE ITS EFFICIENCY.2005
- Project on STUDY OF TURBOJET ENGINE & TESTING PROCEDURE
OF AL31-FP ENGINE, WITH ITS DESIGN FEATURES.2006-2007