Leighton India Mumbai : PDS/PDMS Piping Design Engineer

[Admin]

leighton India Mumbai : Piping Engineers (Lead/Senior)

Website: www.leighton.co.in

Keywords: Piping Engineers Lead / Senior

Designation: Piping Engineers (Lead/Senior)
Experience: 5 - 10 Years
Location: Mumbai
Education:
UG - B.Tech/B.E. - Mechanical
PG - Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Site Engg., Project Management
Posted Date: 12 Mar

Job Description:
Shall be able to lead piping design team.
Experienced in Piping stress analysis using CAESAR II or Auto PIPE, Material selection studies, preparation of MTO & data sheets, plot plans, isometrics, layouts, pipe support design and standards, technical evaluation, coordination with vendors and procurement department.
Shall be able to lead a pre-engineering topside survey team.PDS/PDMS experience an advantage.

Desired Candidate Profile:
Mechanical Engineering Degree.

Company Profile:
We are Leighton International, one of the leading contractors and project developers in Asia and the Gulf region. Our strength lies in our ability to develop innovative, practical solutions for our clients.

Read leighton India Blog

Address: Not Mentioned

Email Address: hr@leighton.co.in

Telephone: Not Mentioned

Keywords: Piping Engineers Lead / Senior

[Guest-IJT]

M.VISHNUKUMAR
No:1052,LIG-II MAIL ID : Vishnu_eee1711 AT yahoo.in
29th street, MOBILE : 9789872112
Avadi,
Chennai-600054

OBJECTIVE:
To work effectively in a challenging and creative environment and contribute towards the goals of the organization.

EDUCATIONAL PROFILE:

Examination / Discipline School / college Board / University Year %

B.E(Electrical and Electronics) Saveetha Engg college, chennai Anna
University 2008 63%
H.S.C. Vidhya Vikas Higher Sec School,Thiruchengode State
board 2004 83%
S. S. L.C St joseph A.I Boys Higher Sec School,Chennai Anglo Indian 2002 74 %


WORK EXPERIENCE:
compeleted Apprenticeship Training in TNEB/MRT/WEST/CHENNAI (TamilNadu Electricity Board)

Work Experience of Current employment:
o 110 / 33/ 11 KV Substation maintenance
o Relay, Circuit breaker and Transformer panel wiring
o New Relay,breaker,Current Transformer, potential transformer and Power Transformer Testing
o Maintaining and Attending faults in Relay, circuit Breaker, Current Transformer, poten-tial Transformer and Power Transformer in Substations
o Checking power consumption and power factor in Industries

AREA OF INTEREST:

o Protection & Switch Gear
o Power System Analysis

COMPUTER PROFICIENCY:

o Diploma in Systems and networking(Certified by NIIT)

INDUSTRIAL VISITS:

o Visited Nuclear power plant in Kalpakkam, Thermal power plant in Ennore.

ACADEMIC PROJECT:

Title: Web based wirless target detection robot

PERSONAL PROFILE:

Name : Vishnukumar.M
Father’s Name : Murugesan.G
Father’s Occupation : Business
Sex : Male
Marital Status : Single
Nationality : Indian
Languages known : Tamil & English
Date of Birth : 17-11-1985
Hobbies : Hearing songs and playing cricket

DECLARATION:
I do hereby declare that the particulars of information and facts stated above are true, correct and complete to the best of my knowledge and belief

Place: Name: Vishnukumar.M
Date: Signature:

[Guest]

i am working in Al answer ceramic Oman as a mechanical engineer in project.

[Guest]

SARODE VISHAL B
E-Mail : sarode99 AT gmail.com

In quest of assignments in the field of Piping Engineering Industry with a reputed organisation
PERSONNEL CREDENTIALS
- Acquired knowledge and understanding of subject Robot Designing through different academic projects.
- Abilities in handling multiple priorities with a bias for action and a genuine interest in personal and professional development.
- An enterprising individual with good interpersonal skills with strong analytical, comprehensive problem solving abilities and a willingness to learn.
- Endowed with a passion for winning as evinced through demonstrated excellence in the extracurricular areas.
SCHOLASTICS
2010 Mechanical Engineering (B.E.) from MMCOE, Pune University with 52.38%.
2006 Class XII from Kendriya Vidyala, Ojhar, CBSE with 59.00%.
2004 Class X from GES-HAL, Ojhar, Maharashtra Board with 72.00%
PROFESSIONAL CREDENTIALS
2012 Piping Design Engineering & Construction (P.G.D) from AAPT, Pune with Distinction.
- Preparation of Plot Plan, Piping Layouts, Equipment Layout, G.A Drawings, Piping isometrics and Line list by using P&ID with Costing.
- Conversant with international codes and standards like ASM B31.1, ASME B31.3, ASME B31.4.
- Pressure design of Process Piping and Component as per ASMEB 31.3.
- Preparation of preliminary valve MTO, Final MTO.
- Static and Dynamic analysis of piping systems.
- Knowledge of designing of Tank farm, Pipe Racks, Expansion loops, Jacket piping etc.
- Plot plan, Process plant layout, PFD and P&ID, Equipment drawings, Pipe Welding.
- Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning.
- International Design codes & Dimensional standards. Viz : ANSI/ASME, API, BS, ASTM, DIN & there use in design, analysis and calculation.
Project Title : PLANT DESIGN FOR PRODUCTION OF OIL.
Organization : ASIAN ACADEMY OF PROFESSIONAL TRAINING.
Description : In this project we did the equipment layout (plan and elevation), nozzle orientation and piping general (plan and elevation) arrangement. After that did calculations for stress acting on pipe internally as well as externally by using standard formula and nomographs as per ASME B 31.3 and then did floor height calculations’ and ladder calculations. Finally drawn the equipment layout (plan and elevation), piping arrangement (plan and elevation) and Isometrics by using software like Auto CAD as well as Pro Pipe software.
COMPUTER SKILLS
Designing Software : PDMS, Pro Pipe, AutoCAD 2010, Caesar-II, CATIA V5R17
Tools : Ms-Office, Outlook Express
Operating System : Windows-XP/ Vista/7, Ubuntu, Mac
Others : C, Operating ERP, Hardware & Networking (Basics), Programming Injection Molding M/C
ACADEMIC PROJECTS
Project Title Design & Manufacturing of Grooving Machine.
Organization M.M.C.O.E.,Pune
Role Coordinator
Duration 6 months (2009-10)
Description The machine manufactured, provides easily the groove on stud’s of different material. This Machine is able to size different groove on stud. It’s a kind of small milling machine. Major advantages were the less production cost and performance of operation is simple as it does not require skilled labor. The project has been drafted, designed and tested for its safety & simplicity.
- Features of the project are : Low manufacturing, Ergonomic design, Simplifying the cutting procedure, Rigidity of machine ,Better & Quick productivity
INDUSTRIAL VISITS
- Hindustan Aeronautics Limited (HAL-NASIK DIVISION), Aircraft Manufacturing Division, Nashik. Vacational Trainee (Inplant Training : 15 days)
- Visited Ujani dam, to know know details on Hydel Power station.
- Visited Sudarshan Chemicals, to see Mechanical Equipment in Pune.
INDUSTRIAL WORK EXPERIENCE
- Organization : SAPL (SARDESAI AUTOPARTS PRIVATE LIMITED), PUNE.
- Experience : Eighteen Months ( 01/07/2010 to 31/01/2012)
- Designation : Production cum Quality Control Engineer
- Company is OEM manufacturer of major plastic automotive components.
- Programming Injection molding m/c.
- Responsibilities such as; Production & Quality aspects of products; Managing & Supervising- Injection molding m/c & operators.
- Updating Shift Analysis, NCR, TPM & has sound knowledge of ERP.
- Conducting Internal audit, Inspection, Process Chart, PDCA, APQP (new development), PPAP, SPC, 5s activity & Lean management.
- Participated in Kaizen Event successfully organized by TML (Tata Motors Ltd) : completed 4 projects.
- Introduced Poka Yoke methods, made 5 projects in company.
- On regular basis carrying out Waste & Rejection management along with Recycling practices.
- Preventive maintenance, Operators training, maintain hygiene and cleanliness in the plant.
- Maintaining Heat Ageing Test of Degassing Tanks.
- Made 14 no’s of Jig-Fixtures for plastic products for process enhancement.
INDUSTRIAL PROJECTS
Project Title Mould Runner Detecting System : Industrial Safety Product
Organization SAPL, Pune
Duration 2 months (Oct’10-Dec’10)
Description
- Designed & manufactured a System, which detects the left runner in the mould.
- This absolutely prevents the mould damage, time and increase the production.
- Successfully working system installed on 2 machines.
- Thus ultimately leads to Process control enhancement.
OTHER ACCOLADES
- Participated in Kaizen Event for Quality Improvement in CHC & AWT products by TML.
- Successfully completed training on Catia V5 from Kumar Solutions Pune.
- Won various prizes in Robotics,
- First prize for COEP Robotics Event ‘MinDSparK’ in Oct’2008.
- First prize for COEP Robotics Event ‘MinDSparK’ in Oct’2009.
- Second prize at a National level event at SVPCOE, Nagpur in 2010.
- Participated in International level event RoBoCoN 2010 Robotics held at Balewadi Stadium conducted by DD-MAE, Role : Team Leader.
- Organised IntraCollege Robotics Event : RoboRAce2k9
- My project “SOLOMECH” was selected in “IIT TECHFEST POWAI” for “ENERGIZE COMPETITION”. It was ranked among top 20 out of 2060 projects in 2009-10.