Instrumenatation Head Delhi : Oil & Gas Industry

[ics.recruitment]

Description:
Specialization:Design Engineering,Engineering,Industrial Engineering,Service/Maintenance/Repair,Design


Job Function:Engg. project Mgmt./site Engg./Civil Engg.,Production/Manufacturing/Maintenance/Packaging

Industry:Petroleum/Oil and Gas/Power

Qualification:School & Graduation -
BE/B.Tech, Diploma

Level:Senior -Sr. Manager, General Manager


Key Skills:Should have minimum 15 years exp in Instrumentation engineering from Oil & Gas

Experience: 15 - 20 Job Details: Should have minimum 15 years experience in Instrumentation engineering from an Oil & Gas Industry.
Candidate should be a graduate in Instrumentation/Electronic Engineering
and should have experience in the field of detailed engineering of
instrumentation and control systems for the process industry including
review of P&I diagrams, preparation of Instrument data sheets, loop and
logic diagrams, selection / sizing of field and control room
instrumentation e.g. DCS, PLC systems. Specific experience in engineering
consultancy organization/EPC Companies will be essential. Knowledge of
relevant Codes, Standards & computer based softwares such as Intools
required. Suitable candidate shall be considered for Head of Instrument
position.



Bharat Chander Uprati
Executive-HR & Business Development

B4/23, Safdarjung Enclave,
New Delhi :- 110029
Phone : +91-11-26183550, 26101250
Mobile : +91-9718554712,9871480555
E-Mail : hr@ics-india.com
Website : www.ics-india.com
www.oilgascareerhunt.com

[Guest-IJT]

Mr. BHALCHANDRA DATTATRAY VACHAKAL
Current Address: - 502/5, Al Ameri House, Near Golden stand 10, Dubai, U.A.E.
Mobile No = 00971+504758460
Office No = 00971+48034774,
Email = bhalchandra.vachakal AT gmail.com ,
info_bhal AT yahoo.com ,


SUMMARY:
Over 9 years of experience in Piping & Layout design for Oil & Gas (Onshore and Offshore), Chemical, Petrochemical and Refinery Plants for Design / Detail Engineering and Modification projects. Using in 3D PDS Modeling, Good Working knowledge of PDS, Smart Plant Review, Pelican Forge, Microstation, AutoCAD and PDMS, is added advantage /2D/3D

TECHNICAL SKILL:
- 3D Modeling of piping as per P&ID, using PDS Intergraph Ver. 8.0,
- Equipment modeling as per vender drawing detail.
- Study, preparation and checking Pipe Supports Arrangement as per support standard and design special pipe supports sketches.
- Conduct 3D model reviews (internal / external)
- Isometric Extraction and Checking
- Studies and MTO estimation for Bids.
- Columan, Exchanger, Pump and compressor Piping
- Plot Plan Development and GA Preparation,
- Rack Piping, OSBL and ISBL Piping.
- Piping Clash & Review in SPR with client
- Nozzle Orientation.

COMPUTER AIDED DESIGN & SOFTWARE:-

Intergraph : - PDS Ver. 8.0 (Good Experience)
Aveva : - PDMS
Bentley : - Pelican Forge (Support Modeler)
Intergraph : - Smart Plant Review
Bentley : - Microstation’SE/J
AutoDesk : - AutoCAD

LIST OF FUNCTIONS: -

- PDS Piping Designer with J. Ray McDermott. Dubai, U.A.E. ( Feb. 2010 to Till date)
- Associate as a PDS Piping Designer with Chemtex Global Engg. ( Feb 2009 to Sep 2009 )
- PDS Piping Designer with Becrel Engineering Pvt. Ltd. ( Feb 2008 To Jan 2009 )
- PDS Piping Designer with SP Consultant Services ( July. 2004 To Feb 2008 )
- Designer with Reliable Consultant Services ( Dec. 2002 To July. 2004 )
- Piping Draftsman with Reliance Petro Chemical.( Sep. 2001To Dec. 2002 )
- Piping Draftsman with CAD Solution ( Dec. 1999 To Sep. 2001 )
EDUCATIONAL PROFILE:-
- Mechanical Draftsman from Industrial Institute, India.
- Piping Draftsman from Akar Institute, Mumbai, India
- Certificate Course in AutoCAD in Aug.1999 from Zaknet Institute, Mumbai. India
- H.S.C. March 1997
- S.S.C. March 1995

Detail of Work Experience:-

1) J. RAY McDERMOTT ENGINEERING. DUBAI (U.A.E.)

J. Ray McDermott is a leading worldwide marine solutions company with fabrication facilities in the Americas, Middle East, Caspian and Asia Pacific. Services include design, fabrication, transportation and installation of offshore platforms, and installation of offshore pipelines.
Designation: - PDS Piping Designer
PROJECT – Rasgas Expansion Project (Ras Laffan Liquefied Natural Gas Co. Ltd.)
JOB PROFILE:-
- Piping and Equipment 3D modeling using PDS
- Preparation and checking of Design and Fabrication Isometric drawings with Bill of Material/Joint numbers/Spool numbers, Field weld marking.
- Support modeling as per support stander detail and extraction 2D drawings using Pelican Forge (Support Modeler)
- Preparation and Checking of equipment layouts, Safety and Escape route layout.
- Clash checking and Review in Smart Plant Review
- Preparation of General Arrangement Drawings using Drawing Manager.
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.

2) CHEMTEX GLOBEL ENGENEERS PVT. LTD. MUMBAI
Chemtex is an engineering, Procurement and construction company that specializes in delivering technology oriented projects for the Oil & Gas Petrochemical, Refinery, Polymers, Fibers, energy and Environmental Industries
Designation: - PDS Piping Designer

Client: - Burns & McDonald (USA)
PROJECT: – Memphis Refinery and Port Auther Refinery.

Client: - ABB (Italy)
PROJECT: –Potassium Naitrate Crystallization Plant KN03 CHILE

JOB PROFILE:-
- Piping and Equipment 3D modeling using PDS
- Isometric Extraction, Checking and MTO Preparation
- Support Modeling and extracting detail drawing from Pelican Forge (Support Modeler)
- Conducting and operating (SPR) model review with Client
- Pump and Exchanger Piping Designing, Pipe Rack Piping Designing.
- Study and Understanding the PID & Client Specification and commenting on them with respect to layout
- Prepare Piping layout, Equipment layout (section, Elevation), GAD Drawing, Special Supports Drawing etc.
- Study & checking of the Nozzle orientation & Ladder/ Platform drawing. Checking the nozzle reports.
- Doing Squad checks and commenting on the vendor drawings.
- Interaction with Multi Office disciplines Civil, Process, and Stress etc.
- General Plot Plan and Equipment Layout preparation.
- Check & Review Clashes, and clear all clashes in clash report



3) BECREL ENGINERRING PVT. LTD. MUMBAI
BecRel Engineering Pvt. Ltd. is engaged in providing Design / Detailed Engineering Services as a Sub-contractor to Bechtel Corp., for the Jamnagar Export Refinery Project for Reliance at Jamnagar in Gujarat. Bechtel Corp is main Contractor engaged by Reliance to provide the EPPMCC services for the Jamnagar Export Refinery Project.
(Reliance Petro Chemical and Bechtel Engg. Pvt. Ltd. Joint venture)
The venture carries out the different design conditions for the worlds largest grass root refinery in Jamnagar i.e., Jamnagar Export Refinery Project (JERP).
Designation: -PDS Piping Designer
Project: - Jamnagar Export Refinery Project

JOB PROFILE:-
- Piping Modeling of Big bore & Small bore lines with the help of P & ID’s using PDS.
- Modeling of Major Equipments like Compressors, Heat Exchangers, Columns, Spherical Tank, Pumps etc. as per vendor drawing using Equipment modeling.
- Carrying out the Batch Extraction for the lines.
- Designing of Supports with the help of Support Standards using Piping and Equipment modeling.
- Isometric checking (Bill of material, Piping routing, P&ID/GAD, Support arrangement, Flow direction,)
- Coordinates (N, S, EL.) Piping Specifications, Location of Vent & Drains at appropriate locations, Accessibility)
- Check & Review Clashes in Smart Plant Review. (SPR)
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.

4) M/s. SP CONSULTANT SERVICES, MUMBAI.
SP Consultant is a engineering design consultancy engaged in Piping Design & routing for Oil & Gas industry .Also engaged in design of Boiler & Pressure vessels.
Designation: Piping Designer
Client: – Reliance Petro Chemical
Project: - Jamnagar Export Refinery Project
JOB PROFILE:-
- Equipment and Piping Modeling as per Piping Layout, Equipment Layout & P&ID
- Isometric Extraction of using Isometric Drawing Manger
- Nozzle orientation as per the convenience of routing.
- Checking Isometric And MTO
- Place logical and physical support using Piping Equipment Model
- Preparation of piping layout.
- Preparation of GA Drawing.

5) RELIABLE CONSULTANT SERVICES, MUMBAI.
Engineering, Management and Construction Services to the Oil & Gas, Refining, Chemical, Polymer, Pharmaceutical, Environmental Protection and Transportation Industries.
Designation: - Piping Designer
Project: - Haldia Petrochemicals Ltd.
JOB PROFILE:-
- Drafting of Piping Layout, Isometrics and Equipment
- Proficient in preparing isometrics with MTO.
- Preparation of Isometrics.
- Help to Preparation Plot Plan Development.
- Draw Isometric, Pipe and Fitting Material Take Off
6) RELIANCE PETRO CHEMICAL LTD, MUMBAI
Designation: - Piping Draughtsman
Project: - Patalganga Power Plant
JOB PROFILE:-
- Preparing Piping Layout, Equipment layouts, Equipment Drawings, P & ID for isometric view in Auto cad 2000
- Developing piping general arrangement around columns, heat exchangers, compressors, turbines, pumps and various other process equipments.
- Preparing Piping Layout, Equipment layouts, Equipment Drawings, P & ID, Material specifications to draw isometric views on Isometric sheets.
- Preparation of GA Drawing

7) CAD SOLUTION, THANE.
Designation: - CAD / Microstation Operator
- Prepared Assembly & details drawings for dies, Tools & Machine Parts.
- Modification & Development drawing of dies, Tools & Machine Parts on exciting machine
- Reporting to Technical Office Manager.

*PDS DESIGNING & MODELING SKILL*
- Complete piping study with plot plan with P&I D’.
- Modeling Equipment as per vendor document.
- Routing Piping as per given P&ID.
- Modeling control valve stations, PSV’s, Flow elements etc. as required.
- Modeling Slope lines as per process requirement.
- Modeling required Piping Supports for critical lines.
- Updating stress comments in model.
- Modeling Structures & platforms for equipment and valve access.
- Modeling the access way to access the required stations and equipments.
- Modeling Pressure & Temperature instruments as per instrument hook-ups.
- Co-ordinate with other area members for Iso Interface checking.
- Checking clashes in model through Smart Plant Review clear and correct in Model.
- Extracting Isometric drawings and checking PDS Iso errors.
- Checking extracted isometrics with P&Ids and Checking MTO and commodity code.
- Finalise the routing with lead engineer and checker.
- Updating the Vendor and Process comments in model.

PERSONAL BACKGROUND
PASSPORT NO : H2759463
Nationality : Indian
Age : 31Yrs.
Date of Birth : 27 October 1979
Sex : Male
Language Known : English, Hindi & Marathi.

I am a very hardworking, explorative and sincere person with a great desire to use my utmost potentials and prove them through my work.
Date :
Place : Mumbai (Bhalchandra vachakal)