Qatar Oman : Civil Engineer : STAAD Pro, PDS PDMS

+ Ask Question / Post resume
Results 1 to 4 of 4
  1. Post Count Number #1
    Site Admin
    Join Date
    April 17th, 2008
    Location
    Europe
    Posts
    11,588

    Qatar Oman : Civil Engineer : STAAD Pro, PDS PDMS

    Urgently Required for EPC Company

    Position Senior Civil Engineer (Offshore Experience)
    Location Qatar / Oman
    Start Time
    Immediately

    Skill Sets Required

    Knowledge of STAAD Pro Required. However PDS / PDMS Exposure will be preferred.
    Knowledge of Analysis and Design of Concrete and Steel Structures necessary
    Familiarization with BS and ACI codes will be an added advantage

    Basic Requirement
    Degree in the respective fields of Engineering B.Sc / M.Sc / B.Eng and /or membership of Internationally Applicable Professional Institute.
    Overall 15 years in Experience with at least 3 years in Offshore Engineering
    Projects Experience in Upstream and Downstream Oil & Gas Industries including Refinery and Petrochemical Industries.
    Experience and a good Understanding of Working on EPC projects.

    Interested Candidates can send their CVs along with the following Details

    Current Location
    Current Salary
    Expected Salary
    Mobilization Period
    Attn : Mr. Haider Ali Ansari

  2. Post Count Number #2
    rajendra_rpj
    Guest

    Draftsman Civil/Structural

    I am looking job for Sr DraftsmanCivil/Structural RCC/Steel

  3. Post Count Number #3
    IJT addict Guest-IJT's Avatar
    Join Date
    October 15th, 2010
    Location
    Looking for Job
    Posts
    20,894

    Name : gunasekaran r
    Email : gsgunasekaran71 AT gmail.com
    Designation / Skillset : PDMS PDS pipingn desig

    Resume :
    CAREER OBJECTIVE :
    To obtain a position in the field that provides the opportunity to make a strong contribution to organisational goals through continued development of professional skills.

    EDUCATIONAL QUALIFICATION :
    S.No Course Name of Institution Year Marks Secured :
    1 B.Tech., (Chemical Engg.) Adhiyamaan College of Engineering, Hosur. 2011 Pass Out 70%
    2 HSC Pasumalai Higher Secondary School,Madurai. 2007 . 73.7%
    3 SSLC Sri Ramakrishna Gurukula Higher Secondary School, Mettur.. 2005 . 69.8%
    * CGPA Calculated till Eighth Semester

    AREA OF INTEREST :
    - Chemical Process Industries
    - Mass Transfer

    ACADEMIC CREDENTIALS :
    - Participated in National Level Seminar on “Control of Non-Linear Systems” Organized by institution of Engineers (India) at Adhiyamaan College of Engineering, Hosur.
    - Attended Short term Course on “Excel for Numerical Techniques” at Adhiyamaan College of Engineering, Hosur.

    PROJECT :
    Control of Non – Isothermal CSTR
    Abstract : This project presents the design of a non linear feedback controller is analyzed for temperature and concentration control of continuous stirred tank reactors (CSTRs) which have strong non-linearities. Consequently, we need to introduce a control mechanism that will make those proper changes on the process to eliminate/reduce the impact that such non-linearities may have on the desired operation of process plant.

    SKILLS :
    - Programming Languages;c

    CO-CURRICULAR ACTIVITIES :
    - Member of ‘Indian Institute of Chemical Engineers’.
    - Member of ‘Institute of Engineers’.

    EXTRA CURRICULAR ACTIVITIES :
    An active member of
    - World Human Rights Organization.

    PERSIONAL TRAITS :
    - Team Facilitator, Willingness to learn and Leadership qualities.

    LANGUAGES :
    Can read, write and speak English, Tamil fluently.

    DECLARATION :
    I hereby solemnly affirm that all the details provided above are true to the best of my knowledge.
    Place :
    Date :
    GUNASEKARAN.R

  4. Post Count Number #4
    Unregistered
    Guest

    cv for the post of civil designer

    Resume
    GOPAL KRISHAN
    Email : gopal.krishan AT rediffmail.com

    Personal Details :
    Father’s name : Shri Jagdev Singh
    Date of Birth : 16 September 1974
    Sex : Male
    Marital Status :Married
    Nationality : Indian

    ACADEMIC QUALIFICATION :
    ** Graduation from Delhi University in 1996

    PROFESSIONAL QUALIFICATION :
    ** 2 Years Certificate Course of D/M/Civil from ITI, Tilaknagar, New Delhi in 1998

    TRAINING :
    ** Course on AutoCAD from R.M. CAD Center, New Delhi

    COMPUTER PROFICIENCY
    ** AutoCAD Rl 14, 2000, 2002, 2004~2010
    ** SP3D
    ** Microstation
    ** PDS – FrameWorks Plus
    ** Well conversant with Ms Excel, Ms Word

    WORK EXPERIENCE :
    From September 2006 to Till date
    Employer : Samsung Engineering India Pvt. Ltd.
    Position : Sr. Designer

    PROFESSIONAL EXPERIENCE :
    Total Professional Experience 14 Years
    Major experience :
    Preparation of layout Drawings for underground facilities like CRWS system, Storm Sewer system, sanitary system, Pile and Foundation plans, Trench layout & details, Roads & Paving, Drainage details drawings.
    Preparation of Equipment foundation drawings and PDS modelling for the same.
    PDS Modelling for Drainage system, Road & Paving, Pipe trenches for Blow Down & Fire fighting system.
    Preparation of U/G composite drawing.

    Experience Summary :
    ** Working on TAKREER Carbon Black & Currently Delayed Coker Project at Abu Dhabi(Started in October 2012).
    My Responsibilities includes preparation of Contaminated Rain Water System, Oily Water System and Sanitary Sewer systems layouts and detailed drawings.
    Modelling of Drainage and Pipe trench system.
    Also responsible for preparation of U/G Composite layout drawing.
    Preparation of Road & Paving drawings etc.

    ** HDPE Unit and Associated facilities at Dahej Petrochemical Complex for ONGC Petro Addition Ltd., Dahej, Gujarat, India.
    Responsible for preparation of CRWS,OWS, SWS & CBD systems drawings as well as modeling. Also responsible for preparation of U/G Composite drawings for all underground piping & other facilities, Pavement drawings and other general civil related drawings.

    ** Dual Feed Cracker Unit and Associated Facilities for ONGC Petro Addition Ltd., Dahej, Gujarat, India
    Responsible for preparation of all UG related drawings and preparation for Road & Paving, Pile & foundation layout, drainage, interface plan & sections, valve box pits, slop drum pits, dyke walls, oil containing pits for transformers etc & modeling as well.

    ** Shah Gas Development(SGD) Programme EPC Package 4- Shah Utilities & Off-sites Project
    Responsible for modeling of drainage system and Trenches for PKG#4 & PKG#9.

    ** Basic Engineering Design Package for PTA Project of Samsung Petrochemical Company. Seoul, S. Korea
    Preparation of Engineering Standards for Basic Engineering Design Package.

    ** NHT-CCR Trinidad & Tobago Ltd.
    Responsible for preparation of Standard drawings for RCC and STEEL for the project & also involved in 3D Modelling of various structures of project on PDS, Equipment Concrete Foundation etc.

    From December 2005 to September 2006
    Employer : L&T-RAMBØLL Consulting Engineers Limited, India
    Position : Engineering Consultant (Highway & Bridges Division)
    Responsibility :
    ** Preparation of highway alignment drawings, plan and profile drawings, bridges substructure, superstructure, pile, pilecap, pier and piercap drawings.
    Projects Worked :
    ** Panipat Elevated Highway Project,Panipat
    Client : L&T ECC, Chennai
    ** Responsible for preparation of detailed drawings for elevated structure, structural drawings, strip plans, alignment plans, cross sections, plan and profile drawings.
    ** Detailed Design of Rail cum Road Bridge across River Brahmaputra at Bogibil near Dibrugarh in Assam (India) 4.3 km long composite welded steel truss superstructure
    Client : RIGHTS India Ltd.
    ** Responsible for preparation of detailed design drawings for Jubilee bridge superstructure (Steel Rail Bridge).

    From July 2002 to December 2005
    Employer : Stup Consultants Pvt. Ltd., New Delhi
    Position : CAD Operator (Highway & Bridges Division)
    Responsibility :
    ** Generate Strip Plan, Alignment Plan, Land Acquisition Plan, Utility Relocation Plan etc.
    ** Preparation of Cross-section, L-Section drawing including QC of drawings.
    ** Responsibility also includes data processing, assisting Design personnel in preparation of other details drawings
    ** Preparation of working drawing of prestressed concrete bridges, pier, pier cap, pile, pile cap, girders, slab culverts, pipe culverts and slab culverts in skew position.
    ** Preparation of General Arrangement Drawing of Bridges, Foundation drawings, Substructure & Superstructure drawings, Dimension & R.C.C. details of bridges.
    Projects Worked :
    ** Project : Consultancy Services for DPR for rehabilitation and strengthening of existing 2-lane road and widening to 4/6-lane from Km 152.0 to Km 219.00 (NH-58) and Km 144.00 to Km 197.00 (NH-72) in the state of Uttranchal.
    Client : Ministry of Road Transport and Highways, India
    ** Project : Consultancy Services for Project Preparation of strengthening of NH-10 for the Road Section from Km 250.0 to Km 275.00
    Client : PWD, Haryana
    ** Project : Consultancy Services for Preparation of Conceptual Parking and Traffic Regulation Planning at Inland Container Depot, New Delhi
    Client : Container Corporation of India
    ** Project : Consultancy Services for Improvement of City Roads in Agartala
    Client : National Building Construction Corporation, India
    ** Project : Flyover at Moti Nagar Intersection (Ongoing)
    Client : U.P. State Bridge Corpn. Ltd.

    From September 1998 to June 2002
    Employer : Development Consultants, New Delhi
    Position : Arch. Draftsman
    Responsibility : Preparation of working drawings of plans, elevations, Sections of various group housing projects.

    MAJOR PROJECTS :
    DDA Mega Housing Project
    Client : Delhi Development Authority
    Project Cost : 150 Crores

    Details :
    This is a competition project won by us in 1999. The project has an estimated cost of Rs. 150 Crores to be built on 18 hectares at Dwarka, Delhi. The project was won by the team effort. The units designed are of EWS with covered area of 30 sq.mtrs., LIG with covered area of 45 sq.mtrs., MIG with 70 sq.mtrs. and SFS with 120 sq.mtrs. In all there are 2050 DU's. The break-up being EWS with 207 units, LIG with 320 units and MIG with 448 units, SFS with 947 units.

    The site has a mixed land use plan it incorporates shopping on ground floor and residences on upper 3 floors/All the units except SFS.

    PROJECT STATUS :
    OTHER PROJECTS :
    (1) Vidyut Vihar Sahkari Awas Samiti Ltd. at Noida
    No. of flats 226 D.U's with 4 types of units. The project cost is Rs. 23 crores approx.

    (2) Bhagirathi Sahkari Awas Samiti Ltd. at Noida
    No. of flats 156 D.U's with 3 types of units. The project cost is Rs. 18 crores approx.

    (3) KSS C.G.H.S. Ltd. at Faridabad
    No. of flats 100 D.U's with 3 types of units. The project cost is Rs. 12 crores approx.

    (4) Lovely Home C.G.H.S. Ltd. at Dwarka.
    No. of flats 107 D.U's with 2 types of units. The project cost is 14 crores approx

    (5) Vivekanand C.G.H.S. Ltd. at Dwarka
    No. of flats 105 D.U's with 2 types of units. The project cost is 12 crores approx

    (6) Janaki C.G.H.S. Ltd. at Dwarka.
    No. of flats 144 D.U's with 2 type of units. The project cost is 12 crores approx. The project is completed in 1999.

    CERTIFICATION :
    I, the undersigned, certify that to the best of my knowledge and belief, these data correctly describe me, my qualifications, and my experience.
    (Gopal Krishan)
    Date :
    Place : New delhi