Piping Design Engineer Delhi : Selective Consultants

[Admin]

Selective Consultants – (Unit Of Khandelwal Overseas Pvt. Ltd.) : Delhi NCR : Piping Design Engineer


We are Looking for Assistant Manager/ Manager for Delhi/NCR. Please send your resume urgently on vaibhav@selectiveconsultants.com . Candidates from all over India may apply for this position.

Job Description: Piping Engineer shall be responsible for Preparation of proposals for ITB, Tendering, Estimation, Procurement, Vendor Selection, Plant and Piping Layout, Basic Piping Design, Detailed Fabrication Piping Design, Detailed Pipe Support Design, Piping Material Specification, Piping Material Selection, Thickness Calculation, Bill of Materials, Isometrics, Support Sketch Drawings, Piping Layout General Arrangement Drawings, Stress Analysis of Critical and non critical Piping and Quality Checks.

Desired Profile: Graduate/Post Graduate in Mechanical Engineering with experience in Piping Design of Power Plants with HRSG / Boilers / Gas Turbine / Steam Turbine. Exposure to the state of the art piping design software like PDS, Auto Pipe Plus, Caesar II, Pelicon Forge etc.
Essential Knowledge – Conversant with Indian and American Standards, Familiarity with 3D design Concept.

Min Exp: 5 yrs.
Max Exp: 15 yrs.


About Us:
“Selective Consultants – (Unit Of Khandelwal Overseas Pvt. Ltd.) Is A 24 Yrs Old Executive Search & Hr Consulting Firm In Terms Of Services Offered, Professional Team, Mandates Handled And Industry Specializations Across Technical / Non Technical Positions. At Selective, We Specialize In Providing End-To-End Recruitment Solutions Based On The Client’s Requirements. We Offer Customized Services To Our Clients Ranging From Start Up Companies To Fortune 1000 Clients And Engage With A Sole Aim To Provide The Best Professionals Available Across Levels And Positions".

Warm Regards


Selective Consultants (A Unit of Khandelwal Overseas Pvt. Ltd.)
2108, Desh Bandhu Gupta Road, IIIrd Floor, Karol Bagh
New Delhi 110 005

vaibhav@selectiveconsultants.com
www.selectiveconsultants.com

Ph: 45417645, 41545500
Mobile: 09971806969

Associates : Jaipur, Chennai, Indore, USA

[manishotti]

My email ID is : manishotti@gmail.com.
i am waiting for your reply.

Thanks


Manish Otti
Date:17/4/09

[utkarshverma]

hello Sir/Madam,

I am utkarsh Verma completed my B.Tech from UPTU Lucknow in 2008 with first division.Here i attached my C.V with this mail.I have total eleven months experience in a campany. First four months experience in production company and then i m working in pipe designing since seven months. I know about piping layout, isometrics, Material takeoff and Bill of Material. I did my training from three places. I am too eager to work in eminent organization i hope that you will give me a oppurtunity to work in a campany.

With Regard
Utkarsh Verma
09227564953
09235890243

[Guest]

I am mechanical engg. having 2 yrs exp. in sheet metal industry.
i have worked as tool room engg,have also handled quality.
I am looking for a new job..
contact me at 09999672603
email-5sharma.amit AT gmail.com

[Guest-IJT]

Babu.CR PLANT DESIGN SYSTEM WITH PIPING-Entry

To contribute closely towards every success

7 years of Project Management Experience

EXPERIENCE AREA Mainly in Customer Relation & in Building Construction Projects
(TN) District-1 Personal Relation Skills, Business Marketting & Customer Service
(TN) District-2 Interior Construction interfaces with Management & Sub-Contractor
(TN) District-3 Structural Construction interfaces with Office & Directly Labours
Residential&Commercial Buildings, Pavement&Landscaping Works
Communication Services (Tel/Fax Internet Cafe & Agency Services)
Site Engineer in Cheran Construction Ltd - Coimbatore
Proprietor of CR Communications - Sivaganga
Site Supervisor in GK Group Paradise Builders - Chennai

QUALIFICATION Diploma in Civil Engineering with Electrical Engg. Background
Internet Browsing & Email Communication Skills
Microsoft Excel, Word & Power Point Presentations
Knowledge in AutoCad Drafting&Microsoft Office Applications

PERSONALITY Hard Working, Disciplined, Easy Going & Highly Responsible
Professional, Project, Personal References & Testimonials are
available for both Reference & Guidance purposes

AVAILABILITY Immediate for More Responsible Job position

SALARY Negotiable

EXPERIENCE RECORDS
Name Babu C.R. (Chandrasekaran Ramesh Babu)
Passport No B 0626488 & Driving License with clean record
Age 34 years on 16 April 2009
Dependants 1 Wife + 1 Daughter
Address 735West Street Kilapungidi Sivaganga PIN 630552
Contact Mobile: 9943685840 Landline:(4575) 233206
Email ramesh.crb AT gmail.com
dhansbabu AT yahoo.co.in

[Guest]

Fathy Ibrahim Emam Morgan
E-mail : fathymorgaan AT yahoo.com
Summary
Respected project management professional with experience working in remote field offices, with experience on medium through mega projects including nearly 35 years of overseas experience working in multi-cultural and diverse countries including Kuwait, United Arab Emirates(Abu Dhabi) and Egypt. Sr. Project manager and key team member is responsible for establishment of WorleyParsons hydrocarbons capability in Cairo Egypt. Project management to Greenfield and Brownfield (Offshore and Onshore) oil and gas projects.
Core strengths include strong organizational and communication skills with high level of integrity, trust and focus on added value. Self-motivated and driven to excel with a reputation for initiative, versatility and ability to manage challenging situations. Additional qualifications include training in Risk Management, Contract Manager Training, Frontline Leadership, Certification as a Project Management Professional (PMP) by PMI and EIT Accreditation.
Specialties
Project and Engineering Management Professional with experience are in project execution of national and international oil and gas engineering project teams. Strong experience Piping, Pipelines and Topsides (FEED, EPC and EPCM) projects.
EXPERIENCE
WorleyParsons Engineers Egypt Ltd, Cairo, Egypt April’ 2008 – Date
Project Manager/ Senior Project Manager
Project Manager is responsible for execution of new project management to achieve all of the project goals and objectives while honoring the preconceived project constraints. Typical constraints are scope, time, and budget. Optimize the allocation and integration of inputs necessary to meet pre-defined objectives.
Major Project Handled :
- For Egyptian LNG Waste Heat Recovery Units (WHRU).
- For Melrose EL Mansoura Petroleum Co 10”& 8” Gas Re-Injection Pipelines.
- For Suez Oil Processing Co Modernization study of Coker Complex.
Gulf of Suez Petroleum Company (GUPCO) Egypt 2005 – 2008
Lead Piping/ Pipelines Engineer –– On-shore/ Off-shore Projects
To provide Project Engineering expertise for the company and management of allocated engineering resources within assigned projects.
To have overall responsibility for the execution and delivery of engineering solutions for allocated projects.
The scope of the project :
- Design of new sub-sea pipelines for revamping the field production, and dehydrating/ desalting units in GUPCO Plant.
- Extension and upgrading of plant utility systems.
- Design of new storage and loading facilities and plant interconnecting piping.
Major Project Handled :

- 20” Trunk Oil Pipeline from Booster Platform (Off-Shore Field). (20 KM Long.)
- 16” Inter-Field Oil Pipeline (IOL) between Platforms. (12 KM Long.)
- 20” Water Injection Pipeline between Platforms. (10.5 KM Long.)
Khalda Petroleum Company (KPC) Egypt 2003 – 2005
Project Manager
Had a dual role are : my primary responsibility, as lead project engineer, providing technical support to plant expansion and I am also serving as project manager / Focal point of various upcoming projects in Umm Baraka field for KPC. Directed general piping engineering activities such as:
- Consultation with licensors, Revamp and upgrade issues, capitol projects and strategic planning of basic engineering design packages, inspection and technical assistance at new refinery projects and turnaround.
- Demonstrably improved technical skills of trainee engineers through coaching and mentoring performance monitoring, optimization and troubleshooting activities.
Major Project Handled :
- New Crude Oil Plant. (Dehydration/desalting plant) 3 trains. At Umm Baraka Field.
- New Water Injection Plant at Khepri Field.
- New Oil Separation Area at Hayat Field.
ABB (Petroleum Technology) PT, Cairo, Egypt 2000 – 2003
Piping Manager Technical Services (PMC project)
- Responsible for fabricate and Install the interconnecting piping detailed engineering and production planning functions of the entire petroleum additives Complex.
- Follow–up the Construction on Site and Handling and adopt a practical approach to pipe problem.
- Working within the provisions and guidelines of the quality assurance system.
- Personal training safety and working within the OHS&W procedures.
- Author of several technical, incident / accident investigation reports for management.
Major Project Handled :
- New Blending Plant for Alexandria Petroleum Additive Co (Turnkey Project).
- New Fire Fighting and Cooling Water System (aboveground & underground).
Abu Dhabi Marine Operating Company (ADMA OPCO) 1985 – 2000
Lead Mechanical Engineer
Responsible for the safe and efficient project installation of the entire platforms complex that comprise of two integrated gas treatment and separation platforms of Zakum , Umm Shaif and Das Island fields.
Major Project Handled :
- Dehydration and Desalting Area Up-Grading Modifications.
- 30” New Main Oil Pipeline from Zakum Field to Das Island(20 KM Long) Subsea Pipeline.
- New 4 No Tank (cylindrical floating type) with Piping Interconnecting addition to Existing Tank Farm at Das Island….etc.
Kuwait Oil Company (KOC) Kuwait 1980 – 1985
Mechanical Engineer
The responsibilities included :
- Cooperation with refinery operation, troubleshooting and optimization of the processes
- Coordination of technical service activities on site at start-ups, base case and guarantee test runs
- Assistance in establishing design base cases and objectives
C. F. BRAUN Company Egypt 1978 – 1980
Piping Project Leader
Responsible for the safe and efficient projects by :
- Prepare the Job programs and time schedules, Liaise with project leaders of other disciplines within technical services to collect all data required to start and complete engineering work.
- Follow up the job programs and time schedules to meet the target date of projects of the New Lube Oil Plant for Suez Oil Processing Company and New 20” main crude oil pipeline.
AMINOIL CO - KUWAIT (Mina Abdulla Refinery)(Now with Kuwait National Petroleum Co- KNPC) 1974 - 1978
Designer – 1
Responsible for Carried–Out engineering Design, Calculations and Material take off for all jobs compliance with AMIN Oil Standards and applying the codes of international(API’s, ASME…etc)
Major Project Handled :
- New Blow down system design detailed to Sulphur Plant Modernization.
- New design detailed for new API Separator (skimming system) on Refinery.
- Sweetening gas plant area extension by add 3 No New Air cooler.
Suez Oil Processing Company 1968 - 1974
Designer (Mechanical)
Responsible prepared Engineering Design Details, Specifications, and Material Take- Off and apply codes of requirement.
Major Project Handled :
- New Distillation Unit (7500 T/D) for Tanta Refinery.
- New Asphalt Unit (1000 T/D) for Cairo Refinery.
- New Filling Station with associated Loading arms with Pump house to Al Zawiah refinery at Libya.
EDUCATION
Bsc in Mechanical Engineering (1968) University of Cairo, Egypt.