www.cisf.nic.in Careers 2012 Central Industrial Security Force : Constable Driver

[muthukalee]

Name of the organisation : Central Industrial Security Force ( cisf.nic.in )
Name of the post : Careers for Constable, Driver in 2012

CENTRAL INDUSTRIAL SECURITY FORCE
SPECIAL RECRUITMENT DRIVE FOR FILLING UP BACKLOG VACANCIES OF
SCHEDULED CASTES, SCHEDULED TRIBES AND OTHER BACKWARD CLASSES OF
CONSTABLES IN THE TRADES OF (DRIVER) AND (DRIVER-CUM-PUMPOPERATOR(
DCPO)) IN CENTRAL INDUSTRIAL SECURITY FORCE - 2012

http://cisf.nic.in/RECRUITMENT_files/RECRUITMENT.htm
http://cisf.nic.in/RECRUITMENT_files...%20ENGLISH.pdf

Applications are invited from Male Indian citizens for filling up the following temporary posts of Constables/Driver and Constable/Driver-cum-Pump-Operator in Central Industrial Security Force as special recruitment drive for filling up backlog vacancies of Scheduled Castes, Scheduled Tribes and Other Backward Classes in the Pay Band – 1 Rs.5200-20200 + Grade Pay Rs.2000/- plus usual and admissible allowances to the Central Government employees from time to time.

Name of post No. of Post
1. Drivers/Constable(Driver)–Direct (Backlog vacancies) - 683
2. Driver-cum-Pump-Operator/Constable(DCPO)–Direct (Backlog vacancies) - 143

Age Limit : Between 21 and 27 years.

Educational Qualification :
a) The candidate should have passed Matriculation or equivalent qualification from a recognized Board.
b) Educational certificate other than State Board/Central Board should be accompanied with Government of India notification declaring that such qualification is equivalent to Matric/10th class pass for service under Central Government.

Experience : 03 years experience of driving Heavy Motor Vehicle/Transport Vehicle or Light Motor Vehicle and Motor Cycle with gear as on the closing date for receipt of application from candidates. i.e. 25-02-2012 including for the candidates of North East region.

HOW TO APPLY :
Application on the proforma as per Appendix – ‘A’ should be sent to any of the authorities prescribed below along with requisite application fees of Rs.50/- (Rupees fifty only) in the form of Postal Order drawn in favour of the officer mentioned under column 2 below and payable at the post office as mentioned under column 3. SC/ST candidates are exempted from application fee.

CLOSING DATE : Application should be sent so as to reach the concerned DIG of CISF as shown in the para-5 above by 25-02-2012 and in case of residents of North East region by 03-03-2012. No application will be entertained which is received after the due date.

The envelope containing above documents should be super scribed “APPLICATION FOR THE POST OF CONSTABLE/DRIVER or CONSTABLE/DRIVER-CUM-PUMP-OPERATOR” AS THE CASE MAY BE.

[Guest-IJT]

Name : mohamed mathar
Email : mohamedmathar.09 AT gmail.com
Designation / Skillset : Grease production& maintenance Supervisor
Date : 18 January 2012
From
Mohammed Mathar,

Dear Sir / Madam,
I understand that there is potential for the expression of talent in your esteemed organization. It is with great interest that I am forwarding my resume for your kind consideration. Presently, I am working as Senior Plant Supervisor at ABS Lube LLC, Abu Dhabi.
I have over 28 years of experience in assembling, calibrating and maintenance of industrial machineries such as :
- Lube oil blending and filing machinery,
- Grease manufacturing plants - including kettles and boilers
- Food processing equipment
- Packaging machinery
I also have 12 years experience in the production of lube oil and grease of different specifications in the Middle East. If given an opportunity, I’m confident of fulfilling your expectations and certainly will be an asset to your organization.
Herewith, I am enclosing my resume for your kind perusal. An interview will prove you of my abilities. Thank you for your time and consideration, and do not hesitate to contact me on 050-5468497 in case if you have any queries.
I hope to hear from you favourably.
Yours cordially,
K. Mohammed Mathar

Resume :
Professional Objective
- To always exceed what is expected. A positive and committed industrial manufacturing professional in pursue of a challenging career with a goal oriented organization that has established itself as a brand leader in its industry of expertise.
Key Skills and Attributes
- Creative, efficient and open minded
- Ability to manage and prioritize workloads
- Acquire and apply new skills quickly and easily
Personal Information
- Nationality Indian
- Religion Islam
- Date of Birth 9th September 1960
- Driving Licence UAE Driving License for Light Motor Vehicle
- Martial Status Married
- Visa Status Residence Visa (Transferable)
- Languages known English and Tamil (To read, write and speak)
Hindi, Marathi and Arabic (To read and speak)
Technical Qualifications
- Advanced Vocational Training on Tool and Die making from Industrial Training Institute, Pune, India. (1 year course - Year of Passing 1978)
- National Trade Certificate on Fitting & Assembly of machine motors and pumps from Department of Technical Education, Maharashtra, India (NCTVT) (4 year course - Year of passing 1982)
Computer Skills
- Operating System Windows XP / Windows 7
- Application Software Microsoft Office Products (Word, Excel and PowerPoint)
- Email Microsoft Outlook
- Web Browser Internet Explorer / Google Chrome
- Engineering Applications Auto CAD (Basic Knowledge)
Professional Experience
From June 1999 to Current Date (12 Years)
Senior Plant Supervisor AT ABS Lubricants, Abu Dhabi, UAE
ABS Lubricants is a leading lube oil and grease manufacturing company in the emirates of Abu Dhabi. The company manufacturers and supplies to many countries in the Middle East including UAE, KSA, Oman, Qatar, Bahrain, Yemen, Iraq, Pakistan and Afghanistan
Key Responsibilities
- Routine production of grease and lube oil. The job involves supervision of cooking, processing and lab testing of grease on daily basis.
- Periodic and “out of the box” maintenance of the entire grease and lube plant in the areas of mechanical, electrical, hydraulic, pneumatic, plumbing and piping.
- Preventive and periodic maintenance of filling and packaging machines; air compressors; oil and grease pumps; grease sufonication cooking kettles, thermic fluid heater, weighing scales and chemical pumps
Achievements
- Installed packaging and sealing machine for small oil cans (5 L, 3 L and 1 L) and weighing and filling machine for 208 Litre Oil Drums.
- Overhauled and commissioned a German-make metal cans seamer machine.
- Redesigned metal can filling system to suit new designs of cans.
April 1983 - May1999 (16 years)
Testing and Commissioning Officer AT Mather and Platt Ltd., Pune, India
Key Responsibilities
- Sixteen years experience in installation, testing and commissioning of various foods processing and petroleum product packaging equipments. Job involves trial run, testing and calibration of electronic weighing scales; periodic and preventive maintenance; fault detection; providing training to plant operators and on-site after sales services.
Achievements
- Assembled Lube Oil packaging equipment for the following Petroleum Companies in India
- Indian Oil Corporation, Madras (IOL)
- Hindustan Petroleum Corporation, Calcutta (HP)
- Bharat Petroleum, Delhi (BP)
- Indo Burma Petroleum Corporation, Calcutta (IBPC)
- Castrol India Ltd (Castrol)
- Tide-Water Oil Company (Veedol)
- Balmer Lawrie and Co
Foreign Assignments
- Seychelles Agro Industries [Seychelles]
Food processing machineries
- Willowton Oil and Cake Mills [South Africa]
Edible Oil filing and packaging plant
- Palmac Oil Refiners Ltd [Kenya]
Edible Oil filing and packaging plant
Projects Handled
High speed oil filling & packaging line, including rotary piston filler with an output of 120 cans per minute; can seamers from M/s Somme, Spain; Check Weigher form M/s Best Inspection, United Kingdom; Plastic can capping machine from M/s Zalkin, France; Lowerator from M/s Malegera, Italy. Work also includes interconnection conveyors, air compressors, dryers, screw elevators etc.
Assembled Food processing equipment for the following companies in India
Modern Food (Jam, Ketchup and Juice processing equipment)
Fruitline Exports (Mango Pulp processing machines)
Multipurpose food processing line, including washer, inspection conveyer, bucket elevator, crusher, pulpers, pasteurizer, preheaters, vacuum pan, storage tanks, rotary pump filler, can seamers, bottle washers, can steriliser and retorts.
Dabur [India] Limited (Health products)
Zandu Balm (Health Products)
Chavanprash processing and filling line, including veneer, feed conveyer, screw elevator, washers, bifurcation conveyer, feed hopper, Amla precookers, pulpers, jacketted kettles, rotary pump filler, heat sealing machines and capping machines.
Vilber Foods (Onion Dehydration Plant)
Onion dehydration lines, it includes onion peeler with rated capacity of 80-100 OP, inspection conveyer, onion washer, bucket elevator onion slicer, slice washer, flight elevator, 5-band continues dryer, bin dryers and shielded dryer.
Balaji Foods (Potato chips)
Potato chips processing plant, Potato slices, Slice Washer, Dewatering conveyor, Fryer, Deoiling conveyor, heat exchanger and thermic fluid heating system.
Pepsi Foods [India] (Chilli Paste)
Chilli paste processing line, it includes Washer, Inspection conveyor, Flight Elevator, Bifurcation arrangement, Precooker, Blancher, Chilli cutter, Chilli grinder imported from M/S Fryma, Italy, Chilli paste mixing tank and acid dozing system.
Other Major Clients in India
- Tight Water Oil Company, Madras ( Veedol Brand Lubes)
- Balmer Lawrie, Calcutta (heat resistance grease)
- Shaw Wallace, Haldia (Insecticide)
- Lipton India, Trichy (Vegetable Oil)
- Shri Ram Foods, New Delhi (Vegetable Oil)
- Ahmed Mills (Postman brand coconut oil)
- Indian Tobacco Company (ITC), Manthralaya (Sunflower brand edible oil)
- Tamil Nadu Agro Industries (Edible Oil)
- MAC Pack (Lube Oil)
- LIPEC Food Processing (Fruit Juices)
- Kissan Chemicals (Pesticides)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 5145123
Date & Time : 18th Jan 2012 12:31 PM (UTC)
IP Address : 83.110.75.209
Browser Info : Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.220 Safari/535.1
Predicted Country : United Arab Emirates

[Guest]

CURRICULUM VITAE
SIVARAM.M
email :sivaram.mogalathurti AT gmail.com

CAREER OBJECTIVE :
Seeking a position to utilize my skills and abilities in the Industry that offers professional growth while being resourceful, innovative and flexible.

EDUCATION QUALIFICATION : SSC

TECHNICAL QUALIFICATION : ITI, FITTER

COMPUTER KNOWLEDGE :
M.S Word, Photoshop,Autocad, Knowledge of E-mail and internet.

PERSONAL SKILLS :
Good communication and Analytical skills, self motivated, Innovative
Thinking and always willing to learn and hard working.

WORK EXPERIENCE : 2year
APPERNTICE in BHEL (HYD).
SHIP MARIN WORK in (KAKINADA PORT).6mnts.
ENERCON INDIA PVT LTD in (MUMBAI).1year.

DECLARATION :
I hereby declare that the above-mentioned information is
correct up to my knowledge and I bear the responsibility for the correctness of
the above-mentioned particulars.

Place : VISAKHAPATNAM.
(SIVARAM.M)
Date :

[nimai96]

I have passed 10th.