www.igntu.nic.in Recruitment 2011 Indira Gandhi National Tribal University : Clerk, Attendant, Engineer

[muthukalee]

Name of the organisation : Indira Gandhi National Tribal University ( igntu.nic.in )
Name of the post : Recruitment for Clerk, Attendant, Engineer in 2011

Indira Gandhi National Tribal University,
Amarkantak, Dist.-Anuppur – 484 886
(A Central University established by an Act of Parliament)

RECRUITMENT NOTICE

Application in the prescribed format are invited from the eligible candidates for the following positions :

S.No Name of Post Details of Post & Category

1 Controller of Examination 01 UR
2 Deputy Registrar 01 UR
3 Internal Audit Officer 01 On deputation
4 Asst. Librarian 01 UR
5 Medical Officer 01UR
6 System Analyst 01 UR
7 Asst. Engineer (Civil) 01 UR
8 Junior Engineer 01 UR
9 Nurse 01 UR
10 Semi-Prof. Assistant 01 UR
11 Library Assistant 01 UR
12 Laboratory Assistant 01 UR, 01ST
13 Lower Division Clerk 02 UR, 01 OBC, 01 ST
14 Driver 01UR, 01 ST, 1 OBC
15 Library Attendant 01 UR, 01 ST
16 Laboratory Attendant 01 UR, 01 SC)
17 Dresser 01 UR

Detailed information regarding qualification and experience and pay scale may be seen university website : www.igntu.nic.in. Completely filled up application forms along with a DD of Rs. 200/- (Rs. 100/- for SC/ST) should be sent to
“The Registrar,
Indira Gandhi National Tribal University,
Amarkantak (M.P.) Pin- 484 886
by Registered/Speed Post only. The Demand Draft should be in favour of “INDIRA GANDHI NATIONAL TRIBAL UNIVERSITY” payable at State Bank of India, Amarkantak (IFSC Code no.SBIN 0004674)

More Details : http://igntu.nic.in/adntpost.pdf

***************
General Instructions:
This is information on Indira Gandhi National Tribal University ( igntu.nic.in ) Recruitment 2011 / Vacancies / Careers / to be filled, for the post of Clerk, Attendant, Engineer.
If you are looking for jobs / career in Indira Gandhi National Tribal University ( igntu.nic.in ), you have to apply by downloading the application form given in the link above.
Full details of recruitment in Indira Gandhi National Tribal University ( igntu.nic.in ) can be had from the detailed advertisement link as given above.
You can also visit the careers page of Indira Gandhi National Tribal University ( igntu.nic.in ) to know more about the selection procedure, latest results, other jobs vacancy requirements etc.
Please ensure that you apply before the last date as all government recruitment procedures adhere a strict policy on this.
***************

[Guest-IJT]

Name : CHETHAN
Email : CHETHAN818 AT GMAIL.COM
Designation / Skillset : DESIGN ENGINEER
Dear Hiring Manager :
I am writing in response to the position of Design Engineer, advertised as being open with your company at this time. I am an experienced Engineering professional who is skilled MACHINE DESIGN, I offer significant abilities in the areas document preparation, and quality assurance. Now I would like to bring my experience and knowledge to work for your company.
My ability to produce innovative and effective designs and i posses problem-solving abilities, and am adept at determining specifications, preparing diagrams and schematics, and authoring all documentation.
The accompanying resume can give you an idea of my potential for making a worthwhile contribution to your company. I believe it may be mutually beneficial for us to meet.
Thank you for your time and consideration.
Sincerely yours
chethan

Resume :

Career Objective :
I am looking forward to establish my career in Design and Development (CAD) in an organization that offers challenging opportunities and prospects for learning, growth and satisfaction.
Profile Summary :
CAD Engineer in Siddhant Technologies (1 Year)
Educational Qualification :
- SSLC, Govt. Boys School, Nyamathi with aggregate of 67% in 2004.
- Pre-University, Govt. Boys College, Nyamathi with aggregate of 60% in 2006.
- Bachelor of Mechanical Engineering from AIT, Chikamaglur with aggregate of 65% in 2010.
Computer Skills :
- AutoCAD 2010
- CATIA V5 R19

Professional Experience :
CAD Engineer in Siddhant Technologies, Bangalore from 2nd August 2010 to Till Date.
Company profile :
Siddhant Technologies, Software Company engaged in providing Engineering
Design Services, such as designs of Jigs & Fixtures, Gauges etc. and CAD/CAE
Services and Solutions.
Responsibilities :
- How to make 2D drawings (Redrawing, Part Drawing and Assembly Drawing).
- Design of Jigs, Fixtures and Gauges.
- Preparation of 2D Drawings for Mechanical Projects.
- Modeling of Jigs, Fixtures and Gauges.
- Modelling of Machine parts
- Preparing Bill Of Materials.
Projects :-
Project 1
Title : Reaming Jig.
Client : Bosch, Bangalore.
Tool Used : AutoCAD 2010.
Description : - In this project it includes both designing, Assembly and
Part Drawings of the Reaming Gauge.
Project 2
Title : Holding Fixture.
Client : Hantek Technologies, Bangalore.
Tool Used : AutoCAD 2010.
Description : - In this project it includes both designing, Assembly and
Part Drawings of the Holding Fixture.
Project 3
Title : Design of PTO Casing
Client : M/s San Engineering and Locomotives India Private Limited.
Software : Catia V5 R19.
Description :-PTO Casing for the transmission of power from input to output. Modeling of this is done for structural analysis purpose to find out the displacement and stresses. The basic design is referred with available product data. Both modeling and detailing is done.
Project 4
Title : Design T-300 Machine.
Client : Kimplas Piping Systems Pvt Ltd.
Software : Catia V5 R19.
Description
T-300 is a winding machine, Modeling of this machine is done for preparing industrial Heater Coils. The Basic Design is referred with available product data. Both Modeling and Detailing is done.


I declare that all the information given above is true to the best of my knowledge and ability.
Place: Bangalore Your’s sincerely
Date:

(Chethan Kumar N.B)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4440178
Date & Time : 3rd Aug 2011 11:07 AM (UTC)
IP Address : 117.192.207.80
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13 (.NET CLR 3.5.30729)
Predicted Country : India

[Guest]

CURRICULUM VITAE
RAVINDER MISHRA
E- Mail : - ravindermishra17 AT gmail.com
OBJECTIVE :
To work in a challenging environment and effectively contribute for the achievement of goal of the organization and there by develop my skills by putting maximum effort.
WORKING EXPERIENCE

- Presently working as a Accounts Officer in
“SEL Manufacturing Co. Ltd” manufacturing and trading company dealing in “Garments & Yarn” Ludhiana from July, 2010 to till date.
- Two Year Experience as an Accounts Asstt. With GRS. INDUSTRIES LTD Ludhiana.
- One Year Experience as an Accounts Asstt with Gurcharan Singh & Associates.
WORK- PROFILE
- Making Payments to the Creditors and receipts from Debtors
- Maintaining Term Loan & Cash Credit Accounts Reconciliation.
- Keeping Record of All Term Loans & Current & Cash Credit Accounts
- Record keeping of Foreign Payments & Receipts
- Party Statements Reconciliation
- Return filling of TDS.
ACADEMIC QUALIFICATION
Exam Passed Board/University Year of Passing
Matriculation P.S.E.B. Mohali. 2005
10+2 P.S.E.B. Mohali. 2007
B. Com Punjab Univ. 2010
COMPUTER SKILLS :
- Operating System : XP, 98, Ms- Dos, Windows 03/07.
- Software Known : Basic Knowledge of Tally, ERP 9,
- Internet : Basic idea of internet.
HOBBIES & INTEREST :
- Interacting with new Peoples
- Travelling
- Listening Music
STRENGTH :
- My strength is my confidence, Strong Dedication & Determination towards my goal and Punctuality.

[Guest]

Shivalika Wadiwa
E-mail : shivalika.wadiwa AT yahoo.com
2006-11 Institute of Engineering and Technology, Indore (M.P.)
Bachelors of Engineering- Computer science (55.50%)
2005-06 First step English medium school, chhindwara (M.P. Board)
HSC - Physics, Chemistry, Maths & English add.Biology(66.66%)

2003-04 First step English medium school, chhindwara (M.P. Board)
SSC – General (78.0%)
Technical skills

Field Of Interest : Software Testing , QA.

Key Skills : Manual Testing ,Test Case Execution ,Bug Reporting.
Bug Reporting Tool : JIra.
Programming Languages : C,C++
Favorite Subject : Control System, ERP, Artificial Intelligence ,Software Engineering.
Operating System : Windows Xp, Window vista ,Windows 7.
Basic Knowledge Of : Database Management System, Operating System.
Work & Experience
- Worked in Performance Matrix BPO for 2 months as a technical support associate.

Project and Training
Project Name : Construction Plus website
Technology Used : ASP .NET, SQL Server
Team Size : 3
Role : Manual Tester
Summary : Our project provides automated facility to the user to get all information
Related to purchasing of houses along with interior and exterior designing

Co-curricular Achievements & Activities
- Had been a member of winning team at school level cricket tournament when I was in 11th standard.
- Had given Dance classes to students in collage.
- Many times got prizes in Science Exibition at temple level competitions.
- Worked as a Tutor
Soft skills
- Readiness to adopt and learn new things.
- Ability to work efficiently in a team.
- Excellent verbal and written communication skills

[Guest]

sir pls help to down load clerk online application form

[Guest]

Sir, do you have any vacancy for Intermediate?

[Guest]

post applied for library assistant
Name Harpreet kaur
E. mail- preet.sweety1 AT yahoo.co.in
Education
I have done graduation in arts from k.u.k.and 3year diploma in L.I.S. now doing B LIB from IGNOU.one year experience as a librarian from D.A.V school.presently working in spring field school as a librarian.
Plz snd a mail if vacant post is available.