Union Public Service Commission Recruitment 2010 : Marine Engineer, Intelligence Officer

[muthukalee]

UNION PUBLIC SERVICE COMMISSION
ADVERTISEMENT NO.21

INVITES APPLICATIONS FOR THE FOLLOWING POSTS
PUBLICATION DATE : 13.11.2010
NORMAL CLOSING DATE : 02.12.2010
CLOSING DATE FOR REMOTE AREAS/ABOARD : 09.12.2010

1.(Vacancy No.10112101613) One Chief Instructor(Marine Engineer)
2.(Vacancy No.10112102213) Two Scientists- SB(Physical, Rubber, Plastic & Textile(PRPT)
3.(Vacancy No.10112103613) One Senior Scientific Officer
4.(Vacancy No. 10112104213) One Senior Scientific Officer, Gr.II(Lie Detector)
5.(Vacancy No. 10112105613) Seven Deputy Central Intelligence Officers(Technical)
6.(Vacancy No. 10112106213) One Deputy Legislative Counsel
7.(Vacancy No. 10112107213) One Assistant Public Prosecutor

NOTE:
1.Candidates are requested to apply in the format published along with this Advertisement No.21 and NOT write to the Commission for application forms. They are also requested to go through carefully the details of posts and instructions published below before applying.

2.NATURE OF POST : All posts belong to General Central Service except otherwise mentioned.
a) Posts at S. Nos.1,2,4,5,6 are permanent
b) Posts at S. Nos.3 & 7 are temporary.

3.PAY SCALE & CLASSIFICATION : (Figures in bracket at the end of the pay scale indicate the approx total emoluments(per month) excluding TA and HRA at the minimum of the scale).
a) Rs.15600-39100+Rs.7600 (Grade pay) (T.E. Rs.31320) Group ‘A’ Gazetted for the post at S. No.6 above
b) Rs.15600-39100+Rs.6600 (Grade pay) (T.E. Rs.29970) Group ‘A’ Gazetted for the post at S.No.1 above
c) Rs.15600-39100+Rs.5400(Grade pay) (T.E. Rs. 30450) Group ‘A’ Gazetted for the posts at S.Nos.4 & 5 above
d) Rs.10000-325-15200(T.E. Rs.22050)(Pre-revised) Group ‘A’ for the post at S. No.3 above.
e) Rs.9300-34800+Rs.4200(Grade pay) (T.E. Rs.18225)Group ‘B’ Gazetted for the post at S.No.7 above.
f) Rs.8000-275-13500(T.E. Rs.17640)(pre-revised) Group ‘A’ Gazetted for the post at S.No.2 above.

4.AGE LIMIT AS ON NORMAL CLOSING DATE : a) Not exceeding 50 years for the post at S. No.6
b) Not exceeding 40 years for the posts at S. Nos.1 & 3
c) Not exceeding 35 years for the posts at S. Nos.2,4 & 5
d) Not exceeding 30 years for the post at S.No.7
N.B. The age limit shown against all Sl.Nos is normal age limit. The age is relaxable for SC candidates upto 5 years & upto 3 years for OBC candidates in respect of vacancies reserved for them. AGE IS ALSO RELAXABLE FOR CENTRAL/UT GOVT SERVANTS UPTO FIVE YEARS AS PER THE INSTRUCTIONS ISSUED BY GOVT OF INDIA FROM TIME TO TIME. For age concession applicable to other categories of applicants please see relevant paras of the Instructions to Candidates for recruitment by Selection.
NOTE : Candidates with disabilities[ as indicated against Item(s)] can apply to the respective posts even if the post is not reserved for them. However, such candidates will be considered for selection to such post by general standard of merit. Persons suffering from not less than 40% of relevant disability shall alone be eligible for the benefit of reservation and other relaxations as permissible under the rules

5.HEADQUARTERS:At places specifically stated against certain posts, otherwise anywhere in India or aboard.

6.PROBATION: The persons selected will be appointed on probation as per rule.

Disclaimer The contents of this page are informatory in nature. Kindly verify the same from the Commission's office.

http://upsc.gov.in/recruitment/advt/2010/21_10.pdf

[Guest-IJT]

Rakesh D. Panchal
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
rakesh_pl AT hotmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set :" is:
-------------------------------------------------------
Sr. Draughtsman - Electrical Offshore
-------------------------------------------------------
The submitted value of field named "Your Cover Letter :" is:
-------------------------------------------------------
Respected,
I am writing to express my interest in the position of Electrical Designer, currently i am looking for the vacancy because of its relevance to my prior professional and academic experiences. I strongly believe that I can make a considerable contribution in your company.
I can offer many skills from my studies, work and other activities.
Currently I am working in Lamprell offshore company, which is located in Sharjah-UAE since last 3 months to till date. Previously I have been 3 yrs exp. in Mumbai & 2 yrs Experience in Singapore & 4 months in Rotterdam, Holland from other company called KeppelFELS.
Kindly please find attached CV for your information.
Thank you very much for your time and consideration of my application.
I look forward to your positive response.
Presently i work in UAE
If i m not able to get in touch mobile then reply on my mail i'll respond immediately.
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
CURRICULUM VITAE
RAKESH D. PANCHAL

Objective :
Seeking a challenging and progressive career using inherent strengths and qualities and to contribute towards the organisational goals.
Educational Qualifications :
- Passed S.S.C from Mumbai board in March1996 with 2nd class.
- Passed ITI in Mechanical Draughtsman from Mumbai University in July 1998 with 1st class.
- Passed Diploma in AutoCAD14 Software from Mumbai Institute in October 1998 with 1st class.
Computer Skills :
- 2d & 3d in AutoCAD R12, 14 Map R2 / 2000, 2004, 2006, 2008.
- Smart Marine3D (Intelliship) & Smart Plan Review
- PDS – Plant Design (Electrical Raceway & Support Frame works)
- TRIBON (M2) – For 3D Modeling
- Microstation – 95 (Basic)
- I_Geovec, Iras B, Iras C (Raster to Vector)
- Raster Utilities (File Converter)
- Photoshop R 6.0 (Basic)
- Microsoft Office 2000
- Insurance Zone, Fire Zone
- Wspmap (Related Wind analysis), Raster to Vector Conversion.
- Computer Hardware Installation & Basic configuration
Company :
1. LAMPRELL, Sharjah UAE. (Work Exp : Jan 2011 – till date)
2. KEPPEL FELS OFFSHORE (P) LTD., Goregaon (W). (Work Exp : Oct 2005 – Jan 2011)
3. KEPPEL FELS OFFSHORE & MARINE LTD., Singapore (23 Months)
4. KEPPEL VEROLME LTD. Nederland, Holland (From Singapore office- 4 Months)
5. CHEMTEX ENGINEERING LTD., Andheri (E). (Work Exp : Oct 2004 – Oct 2005)
6. MEGAVISION TECHNOLOGIES (P) LTD., Bandra (E). (Work Exp : Dec 1999 – Sept 2004)
7. MICROCAD, Andheri (E). (Work Exp : May 1998 to November 1999)
Organization :
1. LAMPRELL, Sharjah, UAE, Hamriyah Free Zone.
Designation : Electrical Designer III
Period : From January 2011 to till date
Nature of Work :
- Prepare Design for Cableway as per Contract & Owner requirement.
- Prepare layout for Schematic and Arrangement as per Vender Certified Drawings.
- Prepare Lighting Arrangement & One line Diagram.
- Prepare Cable schedule for Power & Instrumentation.
- Familiar with Instrument package in Rig Control Networks.
- Prepared Layout for Hazardous area as per referring DNV or ABS clause.
Worked in Projects :
- 116E – NATIONAL DRILLING COMPANY – Jack-up Worked in Hamriyah port UAE.
- 116E – EURASIA DRILLING COMPANY – Jack-up Worked in Hamriyah port UAE.
Organization :
1. KEPPELFELS OFFSHORE LTD., Prism Tower, Mind space, Goregaon (W).
2. KEPPELFELS OFFSHORE & MARINE LTD. (HEAD OFFICE) – 50 Gul Road, Singapore.
3. KEPPEL VEROLME LTD., Rozenburg, Rotterdam, Holland.
Designation : Electrical Senior Draughtsman
Period: 1) From October 2005 to Feb 2006 (Mumbai – India)
2) From Feb 2006 to Feb 2007 (Singapore)
3) From March 2007 to June 2007 (Holland – Netherland)
4) From July 2007 to Nov 2007 (Singapore)
5) From Dec 2007 (Holland – Netherland)
6) From Jan 2008 to Feb 2008 (Singapore)
7) From March 2008 to till date (Mumbai – India)
Nature of Work:
- Prepare Design for Cableway as per Contract & Owner requirement.
- Prepare layout for Schematic and Arrangement as per Vender Certified Drawings.
- Prepare Lighting Arrangement & One line Diagram.
- Prepare Cable schedule for Power & Instrumentation.
- Familiar with Instrument package in Rig Control Networks.
- Worked with Radio Holland regarding for System packages like PAGA, FIRE & GAS and RADAR MAST ANTENNA etc.
- Prepared Layout for Hazardous area as per referring DNV or ABS clause.
Worked in Projects:
- R302 - BALCKFORD DOPHIN – Semi Submersible (16 Column) Worked in Holland
- B280 - SEA DRILL – N-Class Jack-up worked in Singapore
- R309 – SEDCO – 706 - Semi Submersible (8 Column) worked in Singapore
- R298 – SEDCO – 702 - Semi Submersible (8 Column) worked in Singapore
- P56 - Petrobras - Semi Submersible (8 Column) worked in Mumbai
- EMAS – DPS – On shore process module worked in Mumbai
- R328 – Noble – Drill Ship worked in Mumbai
- P61 – Petrobras - Papa Terra – FPSO worked in Mumbai
Organization:
2. CHEMTEX ENGINEERING LTD., Powai, Hiranadani, Andheri (E).
Designation: AutoCAD & Microstation Operator (Electrical Senior Draughtsman)
Period: From October 2004 to October 2005 (1 Year)
Nature of Work:
- Preparation of Electrical Layouts & DRN’s according to requirements.
- Creating Cable tray layouts with 2D & 3D format according to standards.
- Creating Lighting layouts with Single line diagram with respected standards.
- Creating Power & Grounding Layouts with motor list & bill of material with respected standards.
Worked in Projects:
- RELIANCE Polymer Plant (Phase-II), Hazira, Surat, India.
- PRAXAIR Polymer Plant, China.
- TATA Steel Ltd. India.
- BOMBAY DYING
Organization:
3. MEGAVISION TECHNOLOGIES (P) LTD., Bandra (E).
Designation: Lead supervise in AutoCAD & Microstation jobs operations
Period: From December 1999 to September 2004. (5 years)
Nature of Work:
- Preparation of Architectural, Electrical drawings & GIS mapping.
- Creating 3d models in Autocad & Rendering in 3d max.
- Making Layouts from Raster to Vector. Drawing consists of Civil, Electrical, Piping, Mechanical and Ducting.
Worked in Projects:
- Worked on the Enercon India Ltd. project digitizing of map, which were used for windmill analysis.
- Worked for Makers on their 3d project & presentation.
- Worked on a company project, digitising the Mumbai Map with all the features such as Public Services etc.
- Worked on U.S.A GIS Parcel Mapping projects such as Boston, Boxford, Alaska and Mumbaimap.
Organization:
4. MICROCAD, Andheri (E).
Designation: Freelancing AutoCAD Draughtsman
Period: From May 1998 to November 1999. (1 year)
Nature of Work:
- Preparation of all types of conversion drawings.
Worked in Projects:
- Preparation of Architectural, Electrical, Mechanical & Piping Scan drawings.
- Preparation of GIS Mapping drawings for Boston Maps.
- Preparation of Isometric piping drawing with latest updates.
Languages Known : English, Hindi, Gujrati and Marathi.
Signature: RAKESH D. PANCHAL
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4134876
Date & Time : 16th May 2011 4:09 AM (UTC)
IP Address : 86.96.40.246
Browser Info : Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.68 Safari/534.24
Predicted Country : United Arab Emirates