Indian Railway Board Recruitment 2010 RRB : Section Engineer

[Admin]

Government of India
Ministry of Railways
Railway Recruitment Board (RRB)

Indian Railways Centralised Employment Notice No. 05/2010
Date of Publication : 06-03-2010
Date and Time of Closing : 05-04-2010 upto17.30 hrs

Applications in the prescribed format are invited from eligibile Indian Nationals for filling up of the following posts in different Railway Recruitment Boards (RRBs). Application should be sent directly to the respective RRBs :

* Section Engineer : 1758 posts in various RRBs in various trades
pay scale of Rs.9300-34800 grade pay Rs.4600

* Junior Engineer : 4450 posts in various trade in various RRBs
pay scale of Rs.9300-34800 grade pay Rs.4200

* Junior Engineer : 294 posts in various trade in various RRBs
pay scale of Rs.9300-34800 grade pay Rs.4200

Application Fee : Rs.60/- in the form of IPO / DD in favour of Assistant Secretary of concerned RRB where candidate wants to apply.

CANDIDATES PLEASE NOTE :
(1) Written examination will be held on the same day by all participating RRBs.
(2) Participating RRBs have given choice of regional languages, candidates have got the option to choose any one of the regional languages at the time of applying.
(3) No examination fee for SC/ST/Ex-Servicemen/ Physically Handicapped/Women/Minorities / Economically backward classes candidates having annual family income less than Rs.50,000/-
(4) Eligible candidates who have already applied in earlier notifications(as mentioned in column-15 of vacancy table given below) but examination is yet to be held need not apply again in same RRB but he/she is free to apply to more than one RRB at his / her own risk as the examination will be held by all RRBs on the same date. Ineligible candidates whose application has been rejected may apply afresh.
(5) Candidates should refer Para-16 of general instructions for submission of Single / Separate applicatiion to the concerned RRB.

HOW TO APPLY :
01 The application format as per Annexure-1 & 2 should be filled up by the candidate in his/her own handwriting, with blue or black ball point pen (not in pencil, fountain pen or gel pen) dated and signed. Only international numerical i.e. 1,2,3 etc. should be used. The application form should be filled up in English or in Hindi only, strictly observing all the instructions given in this Employment Notice. The candidates should affix his/her normal signature in English or in Hindi in the application form. Applications signed in capital letters/spaced out letters will be treated as invalid.
02 The candidate’s Name, Address with Pin Code, Date of Birth, Father’s Name and nearest Railway Station should be written legibly in English in bold capital letters, even if the candidate fills up the application form in Hindi.
03 Photographs: One recent (not earlier than three months from the date of application) colour passport size photograph with clear front view of the candidate without cap and sunglasses should be pasted on the application form in the space provided. Xerox copy of photographs is not permitted. The candidates should sign in the space provided in the box below the photograph. One identical extra colour passport size photograph should be enclosed with the application, indicating candidate’s name and category number on the reverse of the photograph. Candidates may note that the RRBs may reject at any stage for pasting old/unclear photograph on the application or for any significant variations between photograph pasted in the application and the actual physical appearance of the candidate.
04 In item No.9 of application form, the candidates should indicate any clear visible mark of identification on their body like a mole on the nose, cut-mark on the forehead in the left side or a scar mark below the left arm, etc. The application form of the candidate is liable to be rejected if he/she does not indicate clear identification mark or identification mark column not filled up.
05 The candidate should copy the paragraph at item No. 13 of the Information Sheet in English/ Hindi in their own running handwriting (not in capital/spaced out letters), otherwise their applications will be rejected.
06 The candidates should put their Left Hand Thumb impression at the designated places in the Application Form and in the Information Sheet. The Thumb impressions must be clear and complete. Ridges of the Thumb impressions must be clearly visible.
07 Applications which are illegible, incomplete, unsigned, signed in capital letters, not in prescribed format. without photo of candidate, not having IPO/DD or having IPO/DD purchased before date of issue and after closing date of Employment Notice are liable to be rejected.
08 The envelope containing the application should be clearly super-scribed “Application for the Post/s of _________________________Category No./s __________ Employment Notice No. 05/2010 & Community (SC/ST/OBC/PWD/Ex-SM)”. If the post and category number is not indicated on the top of the envelope containing application, the same will not be entertained.

ONLINE REGISTRATION:
01. Candidates have the option to fill up their application online i.e. for online registration. For this, they should visit the website of the concerned RRB and fill up their detaild Bio-data in the application format & information sheet given on the website wherever such facility is provided by the respective RRB.

RECRUITMENT PROCESS:
01 The selection is made strictly as per merit, on the basis of written examination. Short listed candidates will be called for verification of the original documents according to merit, availability of vacancies and reservation rules.
02 There shall be negative mark in written examinations and marks shall be deducted for each wrong answer @1/3 of the allotted marks for each question.
03 The syllabus for the written examination will be generally in conformity with the educational standards and/or technical qualifications prescribed for the posts. The Questions will be of objective type with multiple answers and likely to include questions pertaining to General Awareness, Arithmetic, General Intelligence and Reasoning and Technical Ability for the post. The question paper will be in English, Hindi, Urdu and Local language as indicated in Para-15 given below and duration of the examination will be 2 hours with 150 questions.
04 The Railway Recruitment Board, at its discretion may hold additional written test(s) and/or interview/skill test if considered necessary for all or for a limited number of candidates as may be deemed fit by Railway Recruitment Board
05 The date, time and venue of the written examination will be fixed by the concerned RRB and will be intimated to the eligible candidates in due course. Request for postponement of the examination, change of centre/venue will not be entertained under any circumstance.

The detailed advt. is published in the Employment News dated 06/03/2010 and it is also available at the websites of all the Railway Recruitment Boards (RRBs). The list of all RRB with their website is available at http://www.rrcb.gov.in/rrbs.html.

For more details :
http://rrbajmer.org/emp_notice/CEN%2005_2010.pdf

[sumita2304]

CURRICULUM VITAE
SUMITA CHAKRABORTY

Career Objective: To be associated with a progressive organization that gives me the scope to apply my knowledge and skills and involve myself as a part of the team that dynamically works towards the growth of the organization.

Address for Communication: C/O – Mr. Bibekananda Chakraborty
Binodini Bhawan,
Dolaigaon, Dist-Bongaigaon
Assam, India
Phone no. - +919954337387

Educational Qualification: Pursuing 8th Semester of B.E. in Electrical Engineering from
Jorhat Engineering College, Jorhat

Academic Profile :
Percentage scored in every semester:-

NAME OF THE EXAMINATION NAME OF THE INSTITUTION YEAR OF PASSING PERCENTAGE OBTAINED
7th Semester Jorhat Engineering College 2009 78.6
6th Semester Jorhat Engineering College 2009 77.4
5th Semester Jorhat Engineering College 2008 72.4
4th Semester Jorhat Engineering College 2008 71.6
3rd Semester Jorhat Engineering College 2007 75.9
2nd Semester Jorhat Engineering College 2007 68.9
1st Semester Jorhat Engineering College 2006 66.3

Percentage in B.E up to 7th semester. Aggregate : - 73%
University Scheme : - 75.5%

Basic Qualification:
Examination Board Percentage ( % ) Division Year of Passing
AISSCE CBSE 71.3 1st 2005
HSLC SEBA 79.8 1st 2003

Computer skill: Programming language : C , C++
Operating System : windows vista, windows XP
Others : MATLAB 2008

Project : 1. Advanced electronics project on D.C Power Supply in 5th Sem
2. Application of FACTS for Power Flow Control in 7th Sem

Training: 1.Winter Training Programme on 220 &132 KV EHV Grid Substation Familiarization and exposure on State Load Despatch & Power Line Carrier Communication,AEGCL, at Kahilipara,Guwahati-781019.

Extracurricular activities:
1. Participated in Recitation competition and won prize
2. Participated in cultural and sports activities in school and college events

Achievements:
1. Obtained Merit Scholarship awarded by the Government of Assam.
2. Obtained Visharad Degree From Bhatkhande University.

Declaration:
I hereby declare that the information furnished above is true to the best of my knowledge.

Date : 07.03.10
Place : Jorhat, Assam SUMITA CCHAKRABORTY

[BALAJISEKAR1989]

CURRICULUM VITAE

S.BALAJI, Phone: +91 9952572570
S/O Mr. S.SEKAR, +91 9443940141
1/45, OLD POLICE STATION STREET,
LATTERI,
VELLORE (DT).
PIN: 632 202 E-mail: balajisekar1989 AT gmail.com

CAREER OBJECTIVE
To associate myself and contribute my skills in the improvement of the organization which has potential for both organization and personal growth , which provide greater scope to learn, improve and implement. Seeking a challenging career in Business Development & CAD and Manufacturing Engineering Support.
ACADEMIC DETAILS
COURSE BOARD/UNIVERSITY % OF MARKS YEAR OF PASSING
B.E(Mechanical Engineering) SCSVMV University, Kanchipuram, T.N 7.98 CGPA (as of seventh semester) 2006-2010
H.S.C Govt.Boys.Hr.Sec.School,Katpadi, T.N 53 2006
S.S.L.C Govt.Boys.Hr.Sec.School,Katpadi, T.N 63 2004

PROJECTS IN DETAIL
UG : EXPERIMENTAL STUDY ON TRIBOLOGICAL BEHAVIOURS OF
CRANK CASE OIL IN A DI DISEL ENGINE

ADDITIONAL QUALIFICATION
- AUTOCAD MECHANICAL - 2008
- Pro-e 2009 wild fire 4.0.
- MS OFFICE

PERSONAL SKILLS
- Self Motivated With Team spirit
- Hard Working & Co-operative
- Planning & Time management

TECHNICAL PROFILE
- Under went in plant Training at, ASHOK LEYLAND Ltd, Chennai, TAMILNADU.
- Under went in plant Training at MITSUBISHI HEAVY INDUSTRIES INDIA PRECISION TOOLS Ltd, SIPCOT, Ranipet, TAMILNADU.
- Under went in plant Training at SRI RANGANATHAR INDUSTRIES Pvt Ltd, Coimbatore, TAMILNADU.

PERSONAL DETAILS
Name : S.BALAJI
Father’s name : Mr.S.SEKAR
Date of Birth : 16-12-1989
Sex : Male
Marital Status : Single
Age : 20
Nationality : Indian
Hobbies : listening music, playing
Games, reading books.
Languages known : Telugu, English, Tamil.

Address for communication : S.BALAJI,
1/45, OLD POLICE STATION STREET,
LATTERI-632 202,
VELLORE (DT).

Declaration: I hereby declare that all statements made are true to the best of my
Knowledge and belief.


DATE :04-05-2010
PLACE: VELLORE
(Balaji.S)

[Guest]

CURRICULUM VIATE
________________________________________
Career Objective :
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. I am willing to work as a key player in challenging & creative environment.
________________________________________________________________________________
Personal Details :
Name : Rashmi M Talekar.
Date of Birth : 8th April 1986.
Temporary Address : ‘Ram Krishna Hari’ Building, Mangal nagar,
Dange Chowk, Pune - 411 016.
Permanent Address : Birdev Nagar, Nipani.
Tah – Chikodi, Dist-Belgaum Karnataka.
Phone No. : 9960850448 / Home – 9845571343.
Gender :
Marital Status : Single
Languages Known : English, Hindi, Marathi and Kannada.
Nationality : Indian
Hobbies : Solving Sudoku, Playing Chess and Carrom.
________________________________________
Educational Qualification :
- Bachelors Degree (Electrical Engineer) - Shivaji University Kolhapur.
- Year of Passing : 2008
- Institution : Govt. College of Engineering. (Karad)
- HSC – Maharashtra State Board
- Year of Passing : 2004
- Institution : Devchand College Arjun Nagar.

- S.S.L.C –BANGALORE BOARD
- Year of Passing : 2002
- Institution : K.L.E. Society English Medium School Nipani.

________________________________________
Experience
From July 2009 to till date
CC Engineers Pvt Ltd.
Hare-Krishna Mandir road,
Model Colony, Pune.
Design Engineer
________________________________________
Projects : Responsibilities:
Would be responsible for receiving and evaluating design inputs, understanding project requirements, co-ordinate with simulation software and e-learning for getting final deliverables prepared, review of output documents.
Responsibilities is to prepare / review of basic and detailed engineering deliverables like faults list, e-learning content, system hardware, process calculations, excel spread sheets, equipment etc.
1. Air breaking system for railway coaches and wagons (Trainer and Simulator)
Role : Design Engineer
- Design of air braking system,
- Operational Process Chart for Air Brake System
- Schematic layout on mimic
- Preparation of Hardware Architectural Diagram
- Selection and estimation of equipment like VFD, motor etc
- Preparation of Electrical wiring diagram in AutoCAD
- RML – Raw Material List(Basic cost estimate)
- Test plan
- Manual (Maintenance, instructor and student manual)
- Delivered design document

2. Propulsion system and Auxiliary converter control (Bombardier Transportation) on going…
Role : Electrical Engineer
- Software Tree Structure of Traction Converter Control CSTT
- Control Panel Design which includes GA drawing, P and I drawing, Data system and acquisition and control architecture diagram, power system diagram, software Architecture diagram, hardware Architecture diagram in AutoCAD.
- Selection and estimation of equipment like VFD, motor, switches, adamcard, compressor etc
- Normal working operation experiments
- Operation during malfunctioning ,event list, fault finding and problem solving solution
- Remedial action in cortona
- Excel spread sheets
Role : SME of technical writer
- To check the story board of traction converter control
3. WAG9 simulator and trainer
Role : Electrical Engineer
- Traction circuit simulation Excel spread sheet
- Auxiliary circuit simulation Excel spread sheet
4. WDG3A Diesel loco simulator and trainer
Role : Design Engineer
- Major deliverables
- Software architecture diagram
- Hardware architecture diagram
- Computer architecture diagram
- Selection and estimation of equipment like VFD, motor, switches, adamcard, compressor etc
- Drawing of cab along with nose room
- Drawing of control panel
- P and I drawing
- Data system and acquisition drawing
- power system diagram
- RML( Basic cost estimate)
- Loco Lube oil system trainer
- Loco Fuel oil trainer
- Cooling trainer
5. Product Literature of WDM3A (Indian Broad Gauge Diesel Mixed 3100 hp)s
Role: Design Engineer
6. Tender Specification of diesel locomotives
Role: Design Engineer
7. Tender Specification of DEMU (Diesel Electrical Mixed Unit)
Role: Design Engineer
Presentation on traction converter control
- Power supply from pantograph through transformer to traction motor
- Charging, discharging, activation and deactivation, drive direction, tractive effort reference limitation of traction converter unit
- Protection and Control through Drive control unit
- Neutral section
________________________________________
Computer Skills:
- AutoCAD and Solid works
- Microsoft office - Proficient
- MS Project – Proficient
________________________________________
Degree Project:
- Title : Micro mouse (It’s An Electronic Gagged)
________________________________________
Achievement:
EVENT PARTICIPATED LEVEL OF PARTICIPATION DESIGNATION YEAR
Project Competition National Participant 2007-08
Paper Presentation National Participant 2006-07
Aavishkar
National Representative National 2006-07
Magzine University Consolation 2007-08
N.T.S.E National 1st Class 2000
Hand Writing Dist level Third Prize 2000
Gathering College Member 2006-07
Chess School, College,Taluka Winner,Winner,
Particiant
2001/03/05/06
Kho-kho Inter class College Runner(Captain),
Winner(Captain)
2000
2005
Judo State, Dist, Taluka Silver Medal,
Gold Medal,
Silver Medal,
1999
2000
2001
I, Undersigned certify that to the best of my knowledge and belief, this data correctly describes me, my qualification, and my experience.
Date :
Place : Pune Rashmi Talekar

[CURRICULUM VIATE]

CURRICULUM VIATE
RESUME
RAMCHANDRA TIWARI
106, Anuradha co. op. H.S.G., Nallasopara (E)
Dist : - THANE
Mobile – 09028612434
E-mail – rtravi30 AT gmail.com ,tiwari.ravi46 AT yahoo.in

CAREER OBJECTIVE
To enhance my skills and be a growing path of technology while working with an organization that would best exploit my knowledge and capabilities.
ACADEMIC PROFILE

Degree : Diploma of Engineering
Engineering College : Gangamai Polytechnic, DHULE
M.S.B.T.E (MAHARASHTRA)
Branch : Mechanical Engineering
SEMESTER YEAR PERCENTAGE

III RD Year 2009-10 84.5%
II ND Year 2008-09 76.5%
I ST Year 2007-08 55%
HSC : Gopeshwar Mahavidhayalya Hathwa
March 2004, Scored 50.55%.
SSC : Uchvidhayalaya Uchaka Gaon
March 2003, Scored 55%.
INDUSTRIAL TRAINING

Company : S.S.J.Works (Boisar)
Department : Production
Duration : 15 Days

PROJECT

1. SOLAR CREN
2. SERVEY REPORT OF HYDRAULIC OIL

EXTRACURRICULAR ACTIVITIES
Achievements
1. STATE LEVEL STUDENTS TECHNICAL QUIZ COMPETITION
2. SPORTS AWARD
Experience
Fresher
Hobbies
- Playing cricket, carom,
- Listening music.
Key skill
Good learning ability with atmosphere adaptability.
PERSONAL DETAILS
Birth date : 05 January 1987
Age : 22
Nationality : Indian
Languages known : English, Hindi,
Height : 170 Cm
Weight : 55 Kg
I, Undersigned certify that to the best of my knowledge and belief, this data correctly describes me, my qualification, and my experience.
Date :
Place ;NALASOPARA [ RAMCHANDRA TIWARI ]

[JITHESH.K.M.]

RESUME
-
JITHESH K.M
Email :gdeshkm@gmail.com

OBJECTIVE
To secure a challenging position where I can effectively contribute my skills as a professional in a company that offers professional growth while being innovative resourceful and flexible.
EDUCATION
B.TECH at Jyothi Engineering College, Cheruthuruthy, Thrissur, 2006-2010 with aggregate of 61%.
Higher secondary from National Higher Secondary School, Irinjalakuda, 2004-2006 with 75% of marks.
S.S.L.C from Government HSS, Cherpu, 2003-2004 with 75% of marks.
Software Skills:
CAD
Solid works
C- programming
PRO-E
MS Office
ANSYS(Basics)
PERSONAL SKILLS
Value close relationship with others
Punctual
Self-regulation
Patience
EXPERIENCE
Fresher
PROJECTS DONE
Major project: CFD ANALYSIS OF DIESEL ENGINE WITH ETHANOL AS ADDITIONAL FUEL USING K- ε MODEL
Mini project: ANALYSIS OF TURBULENT FLOW PAST CYLINDER USING RNG MODEL
EXTRA TO EDUCATION
I was Head of advertising committee of Motor show and Technical exhibiton‘Yanthra 09’ Organized by our Association of Mechanical Engineering Students
Helped in organization of college events like Arts fest, College Day etc

[Guest]

sir i need a job in railway applying for the post of section engineer

S.R. RAJEEV
EDUCATIONAL QUALIFICATIONS :
BACHELOR OF ENGINEERING (MECHANICAL)
- B.E. Department of Mechanical Engineering, Sathyabama University, Chennai,
Batch 2007 – 2011.
78.4% marks
DIPLOMA IN MECHANICAL ENGINEERING (DME)
- Department of Mechanical Engineering, P.S.B Polytechnic College, Thaiyur, kelambakkam, Chennai.
85.3% Marks (FIRST CLASS WITH HONOUR.)
S.S.L.C
- Little Angels Matriculation Hr. Sec School, Thuraipakkam, Chennai - 97.
70.3 % of Marks.

TECHNICAL STUDIES :
1. Auto CAD – 2D Drafting & 3D Modeling in CADD Centre Training Service, Thrivanmiyur, Chennai.
2. Pro-E Wildfire 2.0 in “I – CADD TECH” Centre Training Service, Medavakkam, Chennai – 100.

COMPUTER AND PROGRAMMING SKILLS :

Good Work experienced with Auto CAD, Pro-E, MS Office, HTML, Adobe.

PROJECT WORK :
o Fabrication of Pneumatic of Sheet Bending and Clamping Machine.

E-mail : rajeevsign AT gmail.com , raj_eve07 AT yahoo.com
Mobile : +91 9962330202

S.R. RAJEEV

[Guest]

Please contact me if any job matches my profile..
CURRICULUM VITAE
e-mail Id :
1. vickeyy.86 AT gmail.com
2. pinaky.bhadury AT gmail.com
Mobile No. : +
PINAKY BHADURY

- Career Objective : Seeking a position by utilizing my knowledge and skill in the organization where I can grow along with the development of my organization.
- Personal Strength : (1) I am self-confident, and always committed to meet the deadline of work.
(2) I have adaptability power.
(3) I believe in synergy.
Educational Qualification
- Professional Qualification
Degree Institute Average
(DGPA) SGPA Year of passing Discipline
M.Tech Jalpaiguri Govt. Engineering College, under West Bengal University of Technology & approved by All India Council of Technical Education. pursuing 1st sem- 7.76
2nd sem-8.23
3rd sem-8.82
4th sem-appearing 2011 Mechanical engineering(Production technology & management)
B.Tech. Birbhum Institute of Engineering and technology, under West Bengal University of Technology & approved by All India Council of Technical Education.

7.41 1st sem-6.57
2nd sem-6.60
3rd sem-6.32
4th sem-7.14
5th sem-7.39
6th sem-7.29
7th sem-8.07
8th sem-8.93
2008
Mechanical Engineering.
- Academic Qualification :
Examination Board Institution Year of passing Result (%)
Higher-Secondary
Examination West Bengal Council of Higher Secondary Education. Jalpaiguri Higher secondary school 2004 57.8%
I.C.S.E
Indian council of secondary education Holy Child School 2002 62.8%
- Vocational Training :
Topic : “Familiarization Training of a Diesel locomotive workshop”.
Organization : Diesel locomotive workshop Siliguri junction (N.F Railways). Siliguri
Project Work : “Construction of Fresnel’s solar cooker”
Other Information :
- Language Known :
Read Write Speak
English Yes Yes Yes
Bengali Yes Yes Yes
Hindi Yes no Yes

- Hobbies : Traveling
.

Declaration
I hereby declares that all the information given above is correct according to the best of my
Knowledge & belief.
Place : Jalpaiguri Pinaky Bhadury Date: 31/3/2011 (Signature)

[Guest]

hello sir ,
i am sanam katoch work as mechanical engg. in pyrolysis plant in shiva taxfabs ltd

[Guest]

YATISH SHARMA
Email id : ysharma710 AT gmail.com
CAREER OBJECTIVE :
- Seeking a position where I can effectively utilize my academic interpersonal skill & training knowledge. As I have done training in “Adani Power Plant”, Mundra.
EDUCATIONAL QUALIFICATION :
- I’ve complete the B.Tech. in Electrical Engineering from Ajmer Institute of Technology, Affiliated from R.TU. Kota.
Exams College/School Board/University Y.O.P. Result (%)
Aggregate upto 7th sem. Ajmer Institute of Technology,Ajmer. 2011 75.2%
(EE) Rajasthan Technical University, Kota

Senior Secondary(Science) All Saints Sr. Sec. School,Ajmer. 2007 66.33%
C.B.S.E

Secondary All Saints Sr. Sec. School,Ajmer. 2005 71.33%
R.B.S.E

COMPUTER SKILLS :
- Languages : C, C++ ,JAVA, UNIX, VB
- Database : SQL, ORACLE
- Operating Systems : Windows 2000 / XP/ Windows 7.
KEY SKILLS :
- Good negotiating skills.
- Hard working & Ambitious.
- Easily adjust in working environment.
- Good teamwork skills.
VOCATIONAL TRAINING :
- Vocational Training from ‘Adani Power Limited at Mundra, Gujarat.’ In the month of May - June 2010.
- I have visited numbers of Power Plants in the month of October 2009 these Power Plants are : KSTPS, Kota. ; RAPP; Rana Pratap Sagar Dam, Kota.
PROJECT PROFILE :
- MINOR PROJECT : Wireless Tachometer.
ACHIVEMENTS :
- MAJOR PROJECT : Solar Street lighting System.
- Class Representative in all four years.
- Branch Topper in 3rd Year. Awarded by certificate + Gold Medal + Cheque.
- In 2nd year selected for IIT, Roorkee for Project presentation, Paper presentation.
- 2nd Topper in the college during 1st Year.
EXTRA CURRICULAR ACTIVITIES :
- Always forefront in every type of activities.
- Coordinator in tour arrangement in 2nd year.
- Member in all type of activities at college level.

[Guest]

RESUME
Name VIKAS SINHA
Email : go2vikassinha AT gmail.com

Career Objective
To harness my skills and knowledge to meet all professional challenges and be a part of a dedicated team to provide excellence. To deliver my full potential and achieve a respectable position in the organisation.
Date of Birth 13th January 1985
Languages Known English, Hindi
Parental Background
Father LATE RAMANAND PRASAD SINHA
Mother SAROJ KUMARI MEHTA.
Educational Qualification
DEGREE :
Completed Bachelor of Engineering in the stream of MECHANICAL ENGINEERING, in June 2010 from Siddaganga Institute of Technology, Tumkur, affiliated to Visveswaraya Technological University.
Year Semester Scheme
Semester % of Marks Semester % of Marks
2006-2007 I 68.25 II 69.67
2007-2008 III 72.11 IV 71.22
2008-2009 V 67.11 VI 68.88
2009-2010 VII 73.33 VIII 76
Aggregate of I to VIII Semester : 71%
ADDITIONAL QUALIFICATION :
Degree secured University Institute Year of passing % of Marks
B.Sc. (Physics Hons.) MAGADH UNIVERSITY R.K.D. COLLEGE, PATNA 2005 65.37
PRE-DEGREE :
Examination
Passed Board Institution attended Year of
passing % of marks
12th B.I.E.C. R.K D. COLLEGE,
PATNA. 2001 61.77
10th BIHAR
BOARD
ST.M.G. HIGH SCHOOL, PATNA 1999 54.85
Project completed.
“Root cause analysis for the failure of outer handle and gear box assemblies of AIRBUS A-320 Door project”, in Hindustan Aeronautics Limited.
Technical Skills 1. Pro-E 2. Ansys. 3.solid edge.

Seminars and workshops
Attended ‘Feel Employable’ Training Program Stage-1 and Stage-2 organized by College for Leadership
& HRD by AIMS INSIGHT GROUP, Mangalore.
Hobbies Include
Singing, Cooking.
Important Posts Held
- Class monitor up to class 10th.
- Actively volunteered in the college annual fest– HALCYON’06.
- Actively participated in VTU Fest conducted by the university.
Personality Traits
- Hard Working
- Leadership Quality
- Dedicated Team Player
- Good Communication Skill
- High Grasping Ability

[Guest]

RESUME
MD.IDRISH
E-mail :mdidrish4u AT gmail.com
CAREER OBJECTIVE :-
To learn and excel in all walks of life, reach the height in my profession; prove to be an asset for my or¬ganisation and to make most out of my life for my family and socity.
CURRENT STATUS :-
Pursuing Diploma in Mechanical Engineering 6th semester from Lovely Professional University, Punjab.
TECHNICAL QUALIFICATION :-
COURSE INSTITUTE/UNIVERSITY PERCENTAGE
Diploma( Mechanical Engi-neering) Lovely Professional University,Punjab 76.14% upto 5th Sem
ACADEMIC QUALIFICATION :--
COURSE BOARD INSTITUTE YEAR OF PASSING PERCENTAGE
METRICULATION B.S.E.B Raj High School,Bettiah 2007 57%
10+2 B.S.E.B M.J.K Collage,Bettiah 2009 69.8%
HOBBIES :-
- Driving Bike
- Listening Music
COMPUTER SKILL :-
AUTO/CAD, Ms-office ,Internet surfing
INDUSTRIAL VISIT :-
- Krishna Engineering Work Ltd, Jalandhar (one month)