Name of the organisation : Delhi Metro Rail Corporation Limited (DMRC) delhimetrorail.com Name of the post : Recruitment for Assistant Manager Environment in 2012
Requirement of Asst. Manager (Environment) for DMRC
Delhi Metro Rail Corporation (DMRC), a joint venture company with equity participation from Govt. of India and Govt. of National Capital Territory of Delhi has been entrusted with the responsibility of implementation of the rail based Mass Rapid transit System for Delhi.
Applications are invited from dynamic, self motivated and result oriented candidates for induction as Assistant Manager (Environment) in DMRC. The appointment shall be on direct recruitment basis as mentioned below.
Post : Assistant Manager (Enviornment)
No. of Posts : 02 (UR)
Eligibility/Educational qualification :
1. BE/B.Tech in Civil Engineering/Env. Engg with 1st Division in ME/M.Tech in Env. Engg. or
2. B.Sc in Life Sciences/Science s with 1st Division in M.Sc in Env. Science
Experience : Experience of 2 years in environmental Management in large construction projects in the transport sector, in Government organization or organization of repute
Max. Age as on 01-01-12 : 28 years
Pay scale : Rs.20600-46500 (IDA)
The duly filled in application form should be sent in an envelope super scribing on the cover prominently - Name of Post/Category latest by 02/03/12 by speed post at the following address. Executive Director (HR)
Metro Bhawan
Fire Brigade Lane
Barakhamba Road
New Delhi
Last edited by muthukalee; February 9th, 2012 at 05:46 PM.
i want rrb job
-
S.SUNDARARAJAN - Email id :
- Sundarkaruna555 AT gmail.com - Languages Known :
- Proficient in English, Tamil. - Hobbies : - Listening to Music, Reading books. - Career Objective :
- Up challenging To devote my skills and knowledge for the fulfillment
o of the company’s goal
- To place myself in the competitive era and willing to work hard
- Eager to learn new technologies
- . - Education : - DIPLOMA : MECHANICAL ENGINEERING - College : kottai mariamman polytechnic college, salem. - Department :Diploma in mechanical engineering - Percentage of marks : 91.32% - Year of study : 2008-2011 - SSLC : - School : Government higher secondary school, kedar. - Percentage of marks : 64.8% - Year of study : 2005 - Computer Proficiency :
- AutoCAD
- DIPLOMA IN COMPUTER APPLICATION
Area of Interest :
- Administration
- Human resource management
- Designing
- Supervisor Personal Skills :
- Commitment to work, Sincerity & Punctuality.
- Desire for innovation
Declaration
Place : Yours Sincerely, Date :
(S.SUNDARARAJAN)
February 10th, 2012, 10:11 AM
Post Count Number #3
Name : Murugesan Email : murugudev AT yahoo.com Designation / Skillset : Civil Engineer - Senior Design Engineer - Water
Dear Sir,
Please find attached to this email, a copy of my CV, for your kind consideration. I feel I would be an excellent candidate for your above vacancy as it closely matches my skills and experience. I look forward to hearing from you.
Yours sincerely
Murugesan
Resume : PROFESSION : Civil Engineer POSITION IN FIRM : Senior Design Engineer
EDUCATION : B.E., (Civil Engineering), Bharathiar University., Coimbatore, India
(1996-2000)
M.E., (Environmental Engineering), Anna University, Chennai, India
(2001-2003) CAREER :
Total year of experience in water supply & Infrastructure projects - 10 Years.
Working as a Potable Water, Irrigation & Fire Fighting Engineer (Transmission and Distribution network systems) and Infrastructure projects funded by TDIC(Tourism Development & Investment Company Abu Dhabi, UAE, DEWA (Dubai Electricity and Water Authority), Dubai UAE, DWA (Department of Water Affairs), Botswana, Southern Africa, Royal Commission & Aramco, Saudi Arabia, JBIC (Japan Bank for International Cooperation), World Bank and Indian Domestic Agencies in the states of Tamilnadu, Kerala, Karnataka and Rajasthan. TASKS ACCOMPLISHED :
- Review of feasibility studies concerning water source & alternatives, pipeline alignment & site selection of associated components.
- Preliminary & detailed hydraulic design of gravity & pumping mains.
- Design & analysis of Distribution network using latest software.
- Rehabilitation of existing water supply and water distribution networks.
- Design & analysis of Utilities such as Potable Water, Irrigation Water, Sanitary Waste Water, Industrial Waste Water, Storm Water, Process Water and Sea Water Cooling Systems.
- Preparation of detailed project reports, Specifications, L-Section, Structural design for pipeline, GA drawings and cost estimates. - International Standards referred : AWWA, ASTM, DIN,ISO, ARAMCO
- Liaison with various water supply and other project units.
- Design of potable water supply, irrigation and fire fighting systems on Desert Island projects ( Sir Bani Yas Island)
- Responsible for coordination with other disciplines of roads and drainage works
- Interacted with Client representatives during technical reviews, project reviews and progress meetings.
- Managed engineering and CADD resources.
- Supervised and led the preparation of detailed design & construction drawings, design reports, utility demand calculations, etc. PROFESSIONAL HISTORY :
2010 – JUN 2011 PARSONS INTERNATIONAL LIMITED, UAE
SENIOR DESIGN ENGINEER – WATER
2008 – JAN 2010 MOUCHEL INTERNATIONAL CO LTD, UAE
WATER SUPPLY ENGINEER
2008 – APR 2008 HYDROGEO (PTY) LTD, BOTSWANA, SOUTHERN AFRICA
SENIOR DESIGN ENGINEER
2007 – MAR 2008 SOFCON CONSULTING ENGINEERING CO, KSA
HYDRAULIC DESIGN ENGINEER (SPD)
2005 – JAN 2007 NIPPON KOEI CO., LTD, INDIA
SUPPORT DESIGN ENGINEER (DSC)
2003 – JUNE 2005 SHAH TECHNICAL CONSULTANTS PVT., LTD, INDIA
JUNIOR ENGINEER (DESIGN)
2003 – AUG 2003 SHAH TECHNICAL CONSULTANTS PVT., LTD, INDIA
ASSISTANT ENGINEER (DESIGN)
2000 – JULY 2001 SHAH TECHNICAL CONSULTANTS PVT., LTD, INDIA
ASSISTANT ENGINEER (DESIGN) DETAILED SUMMARY :
2010 – JUN 2011 PARSONS INTERNATIONAL LIMITED.
SENIOR DESIGN ENGINEER – WATER Project : “Sir Bani Yas Island – Desert Island Projects”, Abu Dhabi, UAE. Client : Tourism Development & Investment Company (TDIC), Abu Dhabi.
Master Planning and Infrastructure Development of The SBY Island (Desert Island) Project, with all infrastructure facilities including roads, landscaping, golf course design, water supply, sewerage, storm water, Irrigation, fire fighting, telecommunication, electrical requirements, etc for SBYI. The island of Sir Bani Yas is a natural Island located 250 km southwest of Abu Dhabi, the capital of the United Arab Emirates. It lies 9 km offshore from Jebel Dhanna, which serves as a crossing point to other islands such as Dalma. Sir Bani Yas is 17.5 km from north to south and 9 km from east to west making it the largest, natural island in the UAE. Responsibilities :
Design Engineer for the detailed design of potable water, Irrigation and Fire fighting network in the Sir Bani Yas Island through latest computer software (like WaterCAD and EPANET). Supervising the preparation of preliminary and detailed design drawings of potable water, Irrigation and Fire fighting systems, including TSE water network systems. Preparation of detailed design reports and other reporting deliverables for the project. Carried out techno-economical design of pipeline network and cost estimates of all components of potable water, Irrigation and Fire fighting Systems. Coordination with clients for technical reviews and progress meetings including liaison with other sub consultants for various technical issues.
2008 – JAN 2010 MOUCHEL INTERNATIONAL CO LTD.
WATER SUPPLY ENGINEER Project : DEWA, NAKHEEL, ADWEA & DWA Assisted Infrastructure Projects. Client : DEWA & NAKHEEL, ADWEA, UAE
This project covers comprehensive Infrastructure Development to Dubai City (JVS) and adjoining major villages & Riyadh City, Saudi Arabia. Mouchel in association with Riyadh Municipality (Saudi Arabia), ADWEA (Abu Dhabi) and DEWA (Dubai) are the consultant of this project for detailed design and construction supervision. Responsibilities :
Data collection, Review of feasibility reports, Population & Demand projections using land use maps. Preparation & Analysis of Water Distribution Network and Primary Irrigation network by WaterCADV8.0 and EPANET2.0, Preliminary & detailed hydraulic design of Potable Water System (DI, GRP, PE and uPVC pipes - 2100mm to 350 mm DI & GRP and 315mm to 110mm uPVC&PE). Preparation of Layout Plan, Profiles and Standard drawings, Specifications, Bill of Quantities & Cost Estimates, Tender Documents, Detailed Design Basis Reports..
2008 – APR 2008 HYDROGEO (PTY) LTD.
SENIOR DESIGN ENGINEER Project : DWA Assisted Water Infrastructure Projects. Client : Department of Water Affairs, Botswana, Southern Africa
This project covers comprehensive Water Supply to City and adjoining major villages. HydroGeo in association with MOEDI Group & EHES, South Africa is the consultant of this project for detailed design and construction supervision. Responsibilities :
Data collection, Review of feasibility reports & ToR, Population and Demand projections. Survey Supervision, Fixing and finalizing water pipeline routes. Preparation of Hydraulic Module & Analysis of Transmission & Distribution Network by Water GEMS V8 XM, Preliminary & detailed hydraulic design of Water Supply System (DI and uPVC pipes - 1200mm to 350 mm DI and 315mm to 110mm uPVC). Preparation of Layout Plan, L-Sections and Standard drawings, Tender Documents, Detailed Project Reports, Specifications, Bill of Quantities & Cost Estimates.
2007 – MAR 2008 SOFCON CONSULTING ENGINEERING CO.
HYDRAULIC DESIGN ENGINEER (SPD) Project : Royal Commission Assisted City and Industrial Development Projects Client : Royal Commission, Jubail and Yanbu, Kingdom of Saudi Arabia
This project covers comprehensive Infrastructure Development to City and Industrial Areas, Jubail and Yanbu. SOFCON in association with STANLEY Group, USA is the consultant of this project for detailed design and construction supervision. Responsibilities :
Data collection, Review of feasibility reports and FEED packages, population and Demand Projection. Fixing and finalizing Utility Corridors for PW, Irrigation, Sanitary, Storm, Process, Industrial Waste and Sea Water Cooling Systems. Hydraulic Module & Analysis of PW & IR Water Network by EPANET2.0 and WaterCAD7.0, Detailed hydraulic design of Sanitary, Industrial Waste and Storm Water Systems (4000mm, 3000mm, 2000mm to 350mm FRP and 315mm to 110mm uPVC). Preparation of Standard drawings, Plan and Profiles. Detailed Analysis Reports, Specifications and MTO & Bill of Quantities for all Utilities. Tenders Documents & Tender Evaluation, Cost for IFC & Value Engineering.
2005 – JAN 2007 NIPPON KOEI CO., LTD.
SUPPORT DESIGN ENGINEER (DSC) Project : JBIC Assisted Bisalpur Jaipur Water Supply
Client: Public Health Engineering Department, Jaipur
This project covers comprehensive Water Supply to Jaipur city and adjoining areas. Nippon Koei Co Ltd, Japan, is the prime consultant of this project for detailed design and construction supervision. The other Consortium partners are Nihon Suido Consultant Co.Ltd. Japan, Lahmeyer International ,Germany, TCE Consulting Engineers Ltd., Mumbai, The Louis Berger Group Inc , USA and KRI International Corp.
Responsibilities:
Data collection and Tube well details. Review of feasibility reports, population and Demand Projections. Fixing and finalizing various route alignments, Preparation network modules by EPANET2.0 and WaterCAD7.0, preliminary & detailed hydraulic design of pumping & clear water Transfer mains (MS&DI pipes - 2300mm to 500 mm MS, 450mm to 250mm DI), Calculating economical diameter of pumping main. Preparation of Standard Drawings, L-Section. Detailed project reports, specifications, Bill of Quantities and Cost Estimates. Preparation of Distribution Network module & analyzed for 120 zones. Selection of pre qualification tenders, Tender evaluation and cost for Local Competitive Bid and ICB.
2003 – JUNE 2005 SHAH TECHNICAL CONSULTANTS PVT., LTD.
JUNIOR ENGINEER (DESIGN)
Project: JBIC Assisted Kerala Water Supply
Client: Kerala Water Authority, Thiruvananthapuram
This project covers comprehensive Water Supply Improvements to Trivandrum and Kozhicode City regions, Meenad, Cherthala, Pattuvam and adjoining villages (Two cities and 80 villages). Tokyo Engineering Consultants Co Ltd, Japan, is the prime consultant of this project for detailed design and construction supervision. The other Consortium partners are Binnie Black and Veatch of UK, GKW consultants from Germany, STC, Mumbai and CED, Thiruvananthapuram.
Responsibilities:
Data Collection & Review of TOR and feasibility report, Finalization of fixing suitable Intake location, alignment of raw water and treated water Transmission mains. Supervision of Topographical survey & Geo Technical Investigation. Preliminary & Detailed study of existing Intake wells, detailed hydraulic design of pumping, and gravity & Feeder mains for Pattuvam. The pipe diameter are (1219mm to 1118 mm MS, 900 mm to 200 mm DI, 800 mm to 250 mm PE 100 and GRP 900mm to 700mm). Structural design, Calculating economical diameter for pumping mains. Design and analysis of distribution network module using EPANET 2.0 software for all five WSS (DI, MDPE, uPVC Pipes). Bill of Quantities and Estimation. Design of Underwater Crossing with PE pipes (Vembanad Lake) & Thrust Blocks, Preparation of L-Section and Standard Drawings, Typical drawings prepared for culverts and major canal cross, Railway crossing and Road crossing along Transmission and Feeder main routes. Involved selection of pre qualification, tender evaluation and cost for ICB and LCB.
2003 – AUG 2003 SHAH TECHNICAL CONSULTANTS PVT., LTD.
ASSISTANT ENGINEER (DESIGN)
Project: World Bank Assisted Second Karnataka RWSS (Jal Nirmal)
Client: Karnataka Rural water supply and Sanitation Agency,Bangalore.
Responsibilities:
Data collection, Discussions with Municipal officials, Performance study of existing water supply system, UFW studies in Raw water Transmission main, Analysis of Distribution System using LOOP software, Performance study of existing treatment plant units, Preparation of Detailed Project Reports, Estimates and Bid documents.
2000 – JULY 2001 SHAH TECHNICAL CONSULTANTS PVT., LTD
ASSISTANT ENGINEER (DESIGN)
Project: JBIC (OECF) Assisted Hogenakkal Water supply and Sanitation
Client: Tamil Nadu Water Supply and Drainage Board, Vellore.
Responsibilities:
Data collection, interaction with villagers for their contribution of project. Population projection, demand calculation, Rate analysis for pipe selection. Design and optimal analysis of pumping mains & Feeder main. Design of distribution system using LOOP software and preparation of detailed estimate. Liaison with Clients and other related agencies to collect data relevant to project.
Computer Skills:
- Operating System : Windows 95/98/XP, Vista Business, MS DOS
- Programming : C, C++, FORTRAN, Visual Basic.
- Application Software : MS Office 2003 & 2007, AutoCAD 2006 & 2008, LOOP 4.0,
BRANCH3.0, KyPipe 2006, Surge2000, SEWER3.0, EPASWMM5.0, EPANET 2, Water CAD 7.0 to V8i, Water Gems V8 XM, GIS Arc View and Mapping V9.2
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4289211
Date & Time : 23rd Jun 2011 5:37 AM (UTC)
IP Address : 223.177.165.3
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; InfoPath.1; .NET CLR 1.1.4322; .NET CLR 3.5.30729)
Predicted Country : --
February 10th, 2012, 01:56 PM
Post Count Number #4
Dear Sir
Pls let me know abt the requirements as I have done my Engg+MBA and having 6 years of experience of sales and marketing in the field of financial sector.
Naveen Rana E mail Id : naveenmba_dias AT yahoo.co.in
[b]CHANCHAL SHARMA
Seeking assignments in Commercial Manager, Project Execution Manager, Export Documentation & Accounts Manager with a frontline Logistics, manufacturing companies, Export House & Contracting Organisation. PROFESSIONAL SYNOPSIS : Over 12.6 years of rich experience in Accounts manager, Project Execution ,export documentation . Proficiency in liaising with government / regulatory authorities for keeping compliance with statutory obligations & maintaining papers for sanctions / clearances. Experience in managing the accounting procedures encompassing book keeping, cash collections/ receipts & accounts finalization. Effective communicator with excellent relationship management and honed analytical, problem solving & organizational abilities. Apart from this all working as Accounts manager in an renowned Logistics Company . ORGANIZATIONAL EXPERIENCE : Since Aug. 2011 with Euro Aircon International As Commercial & HR Manager engaged in Contracting business of executing & projecting of Chillers & Packaged Units according to the requirement at site of prestigious clients & having channel partnership with Blue Star Limited all over India with a turnover of Rs. 200 Crores. Some of Prestigious Clients are : Suzuki Powertrain India Limited, Reckitt & Benckiser, Goodyear India Limited, D. K. Flouriculture (Mushroom Planting), Agilent Technologies & the list is endless. Key Result Area :
Commercial Operation
- Preparing & sending offers as per the requirements of the clients & orders from clients & reconcile it with the offers submitted with clients if variation then consult with the CEO of the company.
- Make arrangements of sending material at site with due care of related forms to be attached as per the requirements according to the bar chart or schedule of execution of work at site & get receipt of the material.
-Prepare bills according to the material dispatched at site & simultaneously prepare Order vs Delivery vs Bill Statement as a compilation of material help us to raise bill as per the material reached at site. In case there is variation in the order received & work executed at site then apply for the amendment in the present order.
-Finalise bill after taking due care in implementing all relevant matter & submit with the client for payment according to the terms of payment specified by the clients in their Purchase Order.
-Also do consider with the handing over report & making arrangements for AMC as per our norms.
-Prepare Bank Guarantee as per the requirement of clients & submit for the disbursement of some percentage of money to the client.
-Handling Export Documentation & fulfill all the relevant formalities according to the rules & regulation.
-Handling appointments/resignation& extension of personnel & fulfill all HR related formalities as per the requirement of company & norms as per HR Policy.
-Direct coordination with the clients, Blue Star Limited, Bank, Cargo movers, as per the requirements.
-Apart from this handling day to day expenses & maintaining imprest balance of vendors’ workers.
-Direct Reporting to the CEO of the Company.
From Oct. 2006 –July-2011 with Design Edge a manufacturing company as Project Execution Manager engaged in preparing sites mainly banks in all over India. With a turnover of Rs. 150 Crores IT SKILLS :
- Diploma in Web Centric Curriculum from NIIT in 2001
- Proficiency in Tally (4.5, 5.4 & 6.3), MS Office, Internet & Email Applications. EDUCATION :
1994 Diploma in International Law from Delhi University
1994 B.A (Political Science) from Jamia Millia Islamia
CURRICULM VITAE
MD ARMAN ANSARI Email : - arman.rbm AT gmail.com CAREER OBJECTIVE :-
Aiming to achieve challenging position in my career through hard work and dedication. Looking forward to work in an environment that is friendly as well as encouraging and provides me ample opportunities to enhance my skills. RESUME HIGHLIGHT :-
More than three years of work experience in ‘Real Bond Marketing Ltd, First Flight courier and DHL Courier.
CURRENT ASSIGNMENT :- ORGANISATION : Real Bond Marketing Ltd. DESINGNATION : Office coordinator and Computer Operator DURATION : 13 May 2009 to till date COMPANTY PROFILE :-
Real Bond marketing is Limited Company and ISO certified company. This company is an MLM (Multi Level Marketing). Which has more than 25 branches all over India such as West Bangal, Jharkahnd, Bihar, Orissa, Rajasthan, Chhatisgarh, Andhara Pradesh. Company head office is in New Delhi. Company has three regional offices such as kolkata (West Bnagal), Bokaro (Jharkhand), Bhubanesgwar (Orissa). RESPONSIBILITIES :
- Taking care of customer and short out problem
- Office Maintenance and office coordinate
- Data entry in excel format & on internet
- Net surfing
- Sending emails & mail merge.
PREVIOUS ASSIGMENTS :- ORGANISATION : DHL Ltd and FIRST FLIGHT Courier. DESINGNATION : Data entry operator and Computer Operator. DURATION : 25 Nov 2008 to 7 May 2009. COMPANY PROFILE :
DHL and First flight Courier Company both is combined. Company mostly DELL Computer part, Desktop and Laptop delivery all over India. RESPONSIBILITIES :-
- When some computer parts come from Singapore then download all details DELL website and I mail all company/clients which is joined with us.
- Company has self website and Mostly work on the website.
- Downloading of POD from DELL website. Sending emails & mail merge
- Data entry in excel format & sort-out all data bank
- Solve queries related to delivery and damage part with client or other facilities of the company through mail.
EDUCATIONAL QUALIFICATION :-
- Graduation from Magadh University BODH GAYA
- Intermediate from B.I.E.C Patna
- High School from B.S.E.B Patna PROFESSIONAL QUALIFICATION :-
- D.C.A. from DIIT Computer Education Center Nangli Rajapur (Near I.S.B.T Saria Kale Khan) New Delhi. COMPUTER SKILLS :- - DTP : Photoshop, CorelDraw,
- Internet Browsing. - MS Office : Word, Excel, Power Point
- Typing Speed 40 w.p.m - Operating Systems : Windows 98, 2000, XP, windows7 and vista. MY STRENGHTS ARE :-
- Disciplined
- I am loyal to my work
- Positive attitude
- Positive thinking. Knowledge of Language : -
- English, Hindi and Urdu Area of Interest :-
- MS-Office, DTP & Backend
PERSONAL DETAILS :- Father’s Name : Late.Md Latif Ansari Date of Birth : 3Jan 1989 Religion : Muslim Nationality : Indian Marital Status : unmarried MOTTO :-
Whatever challenges come in the way, accept them and do the best. DECLARATION :-
I here by declare that the above information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars. Date- : Place :- signature