www.upsc.gov.in SCRA Examination 2012 Union Public Service Commission : Special Class Railway Apprentice

[muthukalee]

Name of the organisation : Union Public Service Commission ( upsc.gov.in )
Name of the post : Examination for Special Class Railway Apprentice in 2012

SPECIAL CLASS RAILWAY APPRENTICES' EXAMINATION, 2012

An examination for selection of candidates for appointment as Special Class Apprentices in Mechanical Department of Indian Railways will be held by the Union Public Service Commission on 29th January, 2012

Educational Qualifications :
For admission to the examination a candidate–
(a) must have passed in the first or second division, the Intermediate or an equivalent Examination of a University or Board approved by the Government of India with Mathematics and at least one of the subjects Physics and Chemistry as subjects of the examination. Graduates with Mathematics and at least one of the subjects Physics and Chemistry as their degree subjects may also apply; or
(b) must have passed in the first or second divsion, the Higher Secondary (12 years) Examination under 10 plus 2 pattern of School Education with Mathematics and at least one of the subjects Physics and Chemistry as subjects of the examination; or
(c) must have passed the first year Examination under the three year degree course of a university or the first examination of the three year diploma course in Rural Service of the National Council for Rural Higher Education or the third year Examination for promotion to the 4th year of the four year B.A./B.Sc. (Evening College) Course of the Madras University with Mathematics and at least one of the subjects Physics and Chemistry as subjects of the examination provided that before joining the degree/ diploma course he/she passed the Higher Secondary Examination or the Pre-University or equivalent examination in the first or second division. Candidates who have passed the first/second year examination under the three-years degree course in the first or second division with Mathematics and either Physics or Chemistry as subjects of the Examination may also apply; provided the first/ second year examination is conducted by a University; or
(d) must have passed in the first or second division the Pre-Engineering Examination of a University, approved by the Government of India;

Age Limits :
A candidate must have attained the age of 17 years and must not have attained the age of 21 years on 1st January, 2012, i.e. he/she must have been born not earlierthan 2nd January, 1991 and not later than 1st January, 1995

FEE :
Candidates applying Online (excepting Female/SC/ST/PH candidates who are exempted from payment of fee) are required to pay a fee of Rs. 100/- (Rupees One Hundred Only) either by remitting the money in any Branch of SBI by Cash, or by using net banking facility of SBI or by using Visa/Master Credit/Debit Card.

IMPORTANT
1. CANDIDATES TO ENSURE THEIR ELIGIBILITY FOR THE EXAMINATION :
The Candidates applying for the examination should ensure that they fulfill all eligibility conditions for admission to examination. Their admission at all the stages of the examination will be purely provisional subject to satisfying the prescribed eligibility conditions. Mere issue of admission certificate to the candidate will not imply that his/her candidature has been finally cleared by the Commission. Commission take up verification of eligibility conditions with reference to original documents only after the candidate has qualified for Interview/ Personality Test.
2. HOW TO APPLY :
Candidates must apply Online by using the website http://www.upsconline.nic.in . Brief Instructions for filling up the Online Application Form have been given in the Appendix II. Detailed instructions are available on the above mentioned website.

LAST DATE FOR RECEIPT OF APPLICATIONS : 21.11.2011

More Details : http://www.upsc.gov.in/exams/exams.h...ONS%20-%202012
www.upsc.gov.in

[Guest-IJT]

Name : md iqbal benal
Email : rumechiqb AT gmail.com
Designation / Skillset : Design engineer
B.E Mechanical with 1 year exp, in catia

Resume :
To be associated with a progressive organization that would give me scope to put forth in the best abilities in utilizing my knowledge and exercising dexterity. Also to attain a challenging position which will enable me to apply my knowledge and skills in any field effectively for the mutual development of the organization and myself by Seeking a position to utilize my skills and abilities in the Information Technology Industry that offers Professional growth while being resourceful, innovative and flexible.
Adaptability to different surroundings,Hard working, self-confident, excellent verbal and written communication skills can work effectively in-group as well as an individual, Ability to deal with people diplomatically, willingness to learn.

Application Software : Word, Excel, PowerPoint, Adobe Package.
Programming language : C.
Platforms worked : WINDOWS (98, 2000, XP, VISTA),linux(Fedora 14).
CERTIFICATION
Title of the course : CATIA V5 R16
Duration : June 2006 to July 2006
Institution : SRUSTI, Dharwad
TECHNICAL SKILLS
- CATIA V5 R16
- PRO-E WILDFIRE 2
- AUTOCAD 2006(2D and 3D)
Part Modelling Generative Shape Model Assembly Design Gd & T
& Drafting
- ANSYS
- MASTER CAM
B.E ENGINEERING :
COLLEGE : Gogte Institute of Technology, Belgaum.
BRANCH : MECHANICAL
AGGREGATE : 61.7525% (First class)
1 SEM 60%
II SEM 55.87%
III SEM 55.88%
IV SEM 55.33%
V SEM 49.44%
VI SEM 58.11%
VII SEM 65.22%
VIII SEM 74.24%
PRE-UNIVERSITY :
COLLEGE : Karnataka Science College Dharwad.
PUC 2nd Year Percentage : 70.72% (First class)
SCHOOLING :
SCHOOL : Basel Mission English Medium High School Dharwad.
S.S.L.C Percentage : 70.72% (First class)
Final Semester Project as Part of the B.E Curriculum.
Project Name : “Automatic Overloading Prevention System in Vehicles”
Objective of the project : The main aim of this project is to make the system on the vehicle by which to stop
The overloading on vehicles automatically so that overloaded vehicle damaging
The roads is reduced or avoided.
Duration : 3 months.
Team Size : 4
WORK EXPERIENCE(1 yr- 6 months)
1. UPOR, Navayuga project,Dharwad ,Senior Team Engineer : Feb 2010 to Jan 2011
2. Innovative solutions, Mechanical Drawings drafting Engineer : Jan 2011 to Till date
3. visionaire Lab Systems : Jan 2011 to Jul 2011
1. Work associated with UPOR project As Cad Engineer
To capture land use data form large-scale survey grid maps through Total. It covers entire area . NOVAYUGA is a leading Company provides GIS solutions in property, environmental and risk information to Govt, Transport Dept., Banks, Surveyors, , Civil Engineers and other Professionals. NAVAYUGA has invested in the highest quality Maps along with Info,, that enables it to provide a unique and efficient device to professionals.
RESPONSIBILITIES:
I was responsible for QA and shipment.
Briefings about some of the utilities are: I was awarded 2 times for my significant achievement for my best quality and quantity in QA and Shipment. And promoted me with a designation of Team Leader.
2. Work Associated with Innovative solutions,(PART TIME)
RESPONSIBILITIES:
Designing and drafting of Mechanical Drawings and checking for quality
3. Work Associated with visionaire Lab Systems,
Visionaire Lab Systems, goal is to design and manufacture high efficiency vision AIR Series fume hoods and quality steel laboratory furniture,We are associated with international manufacturer and supplier of laboratory Fume hoods with ultra Labs, ultra labas are quality supplier and SEFA member with all international standard complances.
RESPONSIBILITIES:
Designing of Fume hood,Wall Bench and alan Bench and Chimeny Stack As per Client requirement using Catia V5 R16
- Active Member of Society of Automotive Engineering (SAE).
- Presented Paper on 3D Solar Cells.
- College Team member of Cricket team.
- Participated in inter-college and intra-college fest.
- Organizing various cultural & Technical activities.
- Browsing the Internet, Reading newspaper and Computer related articles, Chatting, Traveling.

I hereby declare that all the above mentioned information furnished by me is true to the best of my knowledge. I assure you that if I am given a chance, I will execute my work to the fullest satisfaction of my superiors.
DATE:
PLACE: DHARWAD (MOHAMMED IQBAL BENAL)

-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4386831
Date & Time : 19th Jul 2011 6:23 AM (UTC)
IP Address : 116.203.85.13
Browser Info : Mozilla/5.0 (Windows NT 6.1; rv:2.0b4) Gecko/20100818 Firefox/4.0b4
Predicted Country : --

[Guest]

SOUVIK GHOSH
E-Mail : svkghsh8 AT gmail.com
________________________________________
In quest of challenging assignments in Production & Manufacturing Operations with an organization of high repute preferably in Automobile Sector
PRECIS
________________________________________
- A dynamic professional of technical & commercial knowledge as well as experience in servicing & maintenance operations with Automobile industries.
- Comprehensive experience in devising significant solutions, managing day to day production operations for making effective utilization of man, machine, method & materials on the operations floor.
- Possess sound knowledge towards servicing of spare parts regarding automobiles.
- Adept at initiating various cost saving measures, reducing servicing cost by controlling process parameters; increasing raw material efficiency as well as reducing scrap generation by eliminating process problems.
- Energetic leader known for ability to envision and create successful teams with latest knowledge & modern skills in product development field to deliver quality services to clients/customers.
CAREER RECITAL
________________________________________
KB Motors Pvt. Ltd., Tata dealership Park circus Kolkata W.B
Since Mar’11 To Oct2011 (Service Advisor)
PRESENTLY WORKING IN JIA AUTO SALES PVT LTD (SKODA DEALERSHIP) AS SERVISE ADVISOR
BKP Automobiles, Barrack pore kalyani expressway 24 pgs (N) W.B
Nov’10 – Feb’11 (Service Advisor)
TECHNICAL QUALIFICATION
________________________________________
2011-Diploma in Automobile Engineering from RPBMJCET WBSCTE, Marshidabad W.B AT 69% of overall marks
2007-Diesel, Petrol Mechanic (I.T.I.) WBSCTE from Bandel Technical Institute W.B AT 59% of overall marks
2006 - Passed Automobile certificate course from Halisahar Vascodagama College IMI Chennai Board W.B
60% of overall marks

[Guest]

what should i do when i am having a degree of mba in marketing with 65% marks & about 5 years of sales & marketing experience before mba, but i am working as sales executive in hdfc bank in gold loan department with the very low salary of 7000 Rs per month only.please suggest me to built my carrier with a attractive salary package.

[Guest]

please result

[Guest]

RESUME
Velmurugan.R
Email : velu_1985 AT ymail.com

OBJECTIVE :
Seeking a position to utilize my skills and abilities in the companies that offers Professional growth while being resourceful, innovative and flexible.
PERSONAL SKILLS
Comprehensive problem solving abilities, Excellent verbal and written communication skills, Ability to deal with people diplomatically, willingness to learn, Team facilitator.
WORK EXPERIENCE :

I have been working as QC Engineer in H.T cable in division in POLYCAB WIRES PVT LTD, Daman, since 26th Aug2010.
POLYCAB :
Polycab is an ISO 9001 :2000 , EMS14001 & OHSAS 18001,certified company and one of the leading companies in the wires and cables manufacturing industry in India with a growth rate of about 25% per annum and a variety of products ranging from HT & LT cables, house wires, CO-axial, telecommunication cables etc.
- PROTECK CIRCUITS AND SYSTEMS PVT. LIMITED :-
July 2008 to July 2010 Date in Proteck Circuits and Systems Pvt. Limited as Assembling Electrical Engineer, Chennai.
- COMPANY PROFILE :-
- Proteck Circuits and Systems manufacturers of Printing and Packaging
Machineries and CNC Machines a 300 Core company.
- Joint Venture with Mitsubishi Heavy Industries, Horizon, Ikegai (Japan)
and Ferag AG (Switzerland).
- Technology focus on precision engineering and automation
- Planning and designing of Electrical layouts in Auto Cad software for Pre-press and Post-press machineries.
ELECTRICAL WIRING FOR THE BELOW MENTIONED MACHINES.
- Paper varnish coating machines.
- UV drying equipment for MITSUBISHI PRINTING MACHINES.
- IR drying equipment for MITSUBISHI PRINTING MACHINES
- Screen printing machines for MITSUBISHI PRINTING MACHINE
EDUCATIONAL QUALIFICATION :
Course Institution Examining Authority Year of Passing Percentage
B.E
(EEE)
Dr.Navalar Nedunchezhiyan College of Engineering Anna University 2008 68%
DIPLOMA
(EEE) Dhanalakshmi srinivasan Polytechnic College DOTE 2005 77%
H.S.C Panimalar Higher Secondary School State Board 2002 69%
S.S.L.C Panimalar Higher Secondary School State Board 2000 55%
IT EXPOSURE :
Operating System : WINDOWS 95/98, XP
Languages : C, C++
Design software : AUTO CADD 2007.
AREA OF INTEREST :
- Electrical Machines
- Power Electronics

Declaration
I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Place : Yours Faithfully
Date :
( VELMURUGAN.R)

[Guest]

Sir/madam
when will the result of scra exam 2012 be announce?pls inform be as soon as possible.

[Guest]

I AM AGED 22 PLUS AND BELONG TO SC COMMUNITY. DO I HAVE THE PERMISSION TO SIT FOR SRCA2012?