Ask Question / Post resume

Post a reply to the thread: Piping design drafting training Hyderabad, Trissur Kerala : DCS, Dhanush Engineering Services

Your Message

Your Username:

Click here to log in

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest;188423]Respected Sir,
I am stress engineer having 4+ years of experience and currently working in Hyderabad. I have great skills in Caesar,Smart plane review, Navies
works, PV Elite and Tank.
Please find the enclosed resume with this application.
Thanking You.
Yours Sincerely,
G.KIRAN KUMAR
 KIRAN KUMAR GANDI 
 
 [b]E-Mail [/b]:kiran58432 AT gmail.com 
Objective
To have an exposure to competitive environment and challenging responsibilities in Advanced Technologies, where my knowledge can be shared, very much enriched and provide opportunity for continuous growth and advancement.
Summary of Experience
- Design experience in various fields of engineering primarily in Petrochemical, Oil & Gas Industry for various projects involving on – plot piping, vessels Etc. 
- Analysis of piping systems involved in process industries and power plants.
- Good knowledge on CAESAR II (piping analysis software).
- Analysis of pipe lines near Reformers, Compressors, Pumps, Flare lines.
- Evaluation of nozzle loads as per WRC 107/297, Steam Turbines nozzles as per NEMA, Centrifugal Pumps nozzles As per API 610, Centrifugal Compressors Nozzles As per API 617, and Heat Exchangers Nozzles As per API 661.
- Flange leakage tests, Relief valves, Underground piping etc.
- Calculation of Initial equipment nozzle displacements.
- Preparation of critical line list.
- Conversant with IS codes such as ASME, API, ANSI, ASTM.
- Occasional analysis like wind and Seismic etc.,
- Preparation and issue of Piping loads to Civil & Structural
- Review of Vendor drawings 
- Pipe rack load calculations.
- Checking of ISO’s as per stress analysis/ support design.
- Good knowledge on GRV/GRE piping.
- Coordination with Interdisciplinary engineers, clients, contractors during Project phase and Comfortable in communicating at all levels & working under specified deadlines.
- Analysis of critical pipe lines involving high temperatures & pressures.
- Static analysis of big diameter ducts at considerable temperatures & pressures
- Buried analysis for GRV/GRE sea water system of big diameter lines.
- Static Analysis of skid piping.
- Preparation of Stress Isometric drawings 
- Preparation of line list by reviewing P& ID and project specification 
- Documentation as per client specifications
Software Skills
 [b]Technical Analysis Software  [/b]: Caesar-II,Tank,PV Elite
 [b]Modeling Software  [/b]: PDMS.
[b]Review Software  [/b]: Navies Works
 
[b]Total Experience [/b]: 5 years. 
 [b]Present Company  [/b]: Kavya Projects PVT Ltd, Hyderabad.
 [b]Work Experience  [/b]: Oct 2007 to Till Date)
 [b]Current Designation  [/b]: Stress Engineer
 
Educational Qualification
- Mechanical Engineering from J.N.T.U, Hyderabad, A.P, in the year of 2007.
- Diploma in Mechanical Engineering from State Board of Technical Education and Training, A.P, in the year of 2004.
- SSC from State Board of Secondary Education, A.P, in the year of 2000.
[b]Projects [/b]:
1. CEMP PHASE - II for BPCL-KR Kochi.
 [b]Client  [/b]: ISGEC. NOIDIA, INDIA.
 [b]Role  [/b]: Stress Engineer 
 [b]Responsibilities [/b]: 
- Static Analysis of above ground piping.
- Analysis of typical systems involving high temperature & pressures like soot blowers.
- Analysis of piping, connecting equipment like pumps, steam headers.
- Analysis of critical pipe lines involving high temperatures & pressures.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Generating & issuing stress isometrics and documentation according to the client requirement.
2. GREEN POWER PLANT, RAS for GEI Industrial Systems Ltd.
 [b]Client  [/b]: GEI INDUSTRIAL SYSTEMS LTD. BHOPAL
 [b]Role  [/b]: Stress Engineer 
 [b]Responsibilities [/b]: 
- Analysis of pipe lines in crucial areas involving turbines and condensers.
- Static analysis of big diameter ducts at considerable temperatures & pressures
- Generating & issuing stress isometrics according to the client requirement.
- Discussing the feasibilities of design modifications with the client.
3. Steam turbine genarator.
 [b]Client  [/b]: TD Power System.
 [b]Role  [/b]: Stress Engineer 
 [b]Responsibilities [/b]: 
- Analysis of typical systems involving high temperature & pressures like steam lines.
- Analysis of piping, connecting equipment like pumps, steam headers.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Generating & issuing stress isometrics and documentation according to the client requirement.
- Preparation of critical line list.
4. Cooling Water System
 [b]Role  [/b]: Stress Engineer 
 [b]Responsibilities [/b]: 
- Buried analysis for sea water system of cooling water system.
- Analysis of piping, connecting equipment like pumps.
- Generating & issuing stress isometrics and documentation according to the client requirement.
5. Hydrogen Generation Unit (HGU) for Bharat Oman
 Refineries ltd. Bina Madhya Pradesh India
 [b]Client  [/b]: TECHNIP KT INDIA LTD, NOIDA, INDIA
 [b]Role  [/b]: Stress Engineer 
 [b]Responsibilities [/b]: 
- Static Analysis of Piping systems.
- Analysis of pipe lines near Reformers, Compressors, Pumps, Flare lines etc.
- Analysis of critical pipe lines involving high temperatures & pressures.
- Analyze loads on compressor nozzles and perform flange leakage tests.
- Preparation of Stress Documents for Approval
- Selection and design of supports for non critical piping
- Nozzle load evaluation as per applicable codes.
6. START UP PRODUCTION PACKAGE
 [b]Client  [/b]: MANGALA FIELD DEVLOPMENT AT RAJESTHAN
 [b]Role  [/b]: Stress Engineer 
 Responsibilities: 
- Selection and design of supports for critical piping and non critical piping (Total Plant)
7. Replacing of Sea Water Lines. 
 Client : TAKREER, Abu Dhabi Refinery Co. 
 Role : Stress Engineer 
 Responsibilities: 
- Buried analysis for GRV/GRE sea water system of big diameter (48”) lines.
- Results of the analysis are documented for client review.
8. Filter Skids
 Client : Tech International, Abu Dhabi. 
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of Piping systems.
- Generating & issuing stress isometrics and documentation according to the client requirement.
9. OILY WATER SKID
 Client : Tech International, Abu Dhabi
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of skid piping.
- Analyses of piping, connecting equipment like KO drum etc.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Generating & issuing stress isometrics and documentation according to the client requirement.
10. Flare System
 Client : Hindustan Petroleum Corporation Ltd, Visakhapatnam
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of flare piping.
- Analyses of piping, connecting equipment like KO drum etc.
- Generating & issuing stress isometrics and documentation according to the client requirement.
11. PALL FILTERS
 Client : PALL CORPORACTION
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of skid piping.
- Analyses of piping, connecting equipment like KO drum etc.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Generating & issuing stress isometrics and documentation according to the client requirement.
12. CRUID OIL PRODECTION UNIT
 Client : UOPSL
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of Flare line.
- Analyses of piping, connecting equipment like KO drum etc.
- 3D viewing of design layout using PDMS and checking the compatibility of the design with respect to analysis.
- Selection and design of supports for non critical piping (Total Plant)
- Generating & issuing stress isometrics and documentation according to the client requirement.
13. BOOSTER STATION 171(PIPE RACK 4,5,6,7 AND 8)
 Client : SAIPEM
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of flare line on pipe rack.
- Documentation according to the client requirement
- Flange leakage tests, Relief valves etc.
- Occasional analysis like wind and Seismic etc.,
- Preparation and issue of Piping loads to Civil & Structural
14. ARJEW PROJECT
 Client : SAIPEM
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of piping.
- Supports checking as per Client Isometrics.
- Documentation according to the client requirement
- Flange leakage tests, Relief valves etc.
- Occasional analysis like wind and Seismic etc.,
- Preparation and issue of Piping loads to Civil & Structural
15. BTPP PROJECT
 Client : ENERGY INFRATECH PRIVATE LIMITED
 Role : Stress Engineer 
 Responsibilities: 
- Static and Slug Analysis of under ground and above ground piping.
- Preparation and issue of Piping loads to Civil & Structural
- Documentation according to the client requirement
16. SHAH PROJECT
 Client : SAIPEM
 Role : Stress Engineer 
 Responsibilities: 
- Static Analysis of piping.
- Supports validation and markup in Client Isometrics.
- Documentation according to the client requirement
- Flange leakage tests, Relief valves etc.
- Occasional analysis like wind and Seismic etc.,
- Preparation and issue of Piping loads to Civil & Structural.
- Preparation of spring data sheet.
- Analysis of pipe lines near Compressors, Pumps, Flare lines and etc.
 
I have great skills in equipment analysis( hands with experience on PV ELITE and TANKS-API 650).
Declaration
I hereby declare that the above given information are true to the best of my knowledge and belief.
Date : Place :Hyderabad (KIRAN KUMAR.G)[/QUOTE]

All times are GMT +5.5. The time now is 11:10 AM.