Ask Question / Post resume

Post a reply to the thread: Topaz Engineering Mumbai, AbuDhabi : Offshore EPIC Fabrication Estimation Engineer

Your Message

Your Username:

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest;159161]Dear Sir,
 I have more than 16 years of experience as Mechanical Engineer in construction (Piping) field, LNG, NGL, LPG and Oil & Gas with Overseas assignments in reputed international Clint’s.
 I am presently assigned to the Qafco 6 Project as a PIPING FIELD ENGINEER with 
 Saipem S.P.A. ENI, (A leading EPC Contracting Company) Qatar. Here all most job is completed, that’s why I,m looking for a new job.
So Please find here with a copy of my update Curriculum vita.
 
 VIJAY PRATAP SINGH 
 [b]Email [/b]: singhvp68 AT yahoo.co.in 
 Singhv68 AT gmail.com 
 
OBJECTIVE
Seeking growth oriented challenging career.
EXPERIENCE SUMMARY
More than 16 years of experience as Mechanical Engineer in Construction (Piping) Field, LNG and Oil & Gas with Overseas assignments in reputed International Clients.
CAREER PROFILE 
- Piping Field Engineer with SAIPEM SPA, for Qafco 6 Project, Qatar ( to till date)
- Piping Field Engineer for 12 months with Bonatti SPA, Kashagan Development Experimental Project, Kazakhstan North Caspian.
- Piping Field Engineer for 7 months with SNAMPROGETTI SPA, ENI (A leading EPCContracting Company) A Company of saipem, for Samir upgrade project Mohammedia, Morocco.
- Piping Field Engineer for17 months with SNAMPROGETTI SPA,ENI (A leading EPCContracting Company)A Company of saipem , for 3NGL Ruwais side.(UAE ) 
- Piping Field Engineer for 8 months with Cakra Catur Nikki Construction - Joint Venture (A leading EPC Contracting Company) Tangguh LNG Project, Indonesia.
- Piping Field Engineer for 5 months with Dodsal Pte Ltd. for their Dolphin Onshore Gas Compression Facilities Project, Qatar.
- Piping Engineer for 17 months with Dodsal Pte Ltd., for their ELNG (SEGAS) Project, Main Contractor – JGC-KBR, Joint Venture, Egypt.
- Piping Engineer for 20 months with Dotanah Engg. & Const. SDM, for their MLNG TIGA Plant Project, Main Contractor – JMSB-KMSB-SIME JGC-KBR, JV, Malaysia.
- Piping Supervisor for 4 months with Mannesmann Demag Ag, for their ASAB Gas Site, U.A.E.
- Site Engineer for 33 months with Dolphin Offshore Enterprises (India) Ltd., for Bombay High (O.N.G.C. All Platform). India.
- Site Engineer for 10 months with Onshore construction com Ltd., Client – Hindustan Organic Chemical Ltd., Patal Ganga, Bombay, India.
- Site Engineer for 22 months with Offshore Welder & Fabricator Pvt. Ltd. for their Supreme Petro Chemical Ltd., Nagothana Project, India.
- Trainee Engineer for 6 months with Offshore Welder & Fabricator Pvt. Ltd., Bombay for their Supreme Petro Chemical Ltd., Nagothana Project, India.
 KEY FUNCTIONS & RESPONSIBILITIES 
- Resolving the Technical Queries and Co-ordination of Test Pack.
- Knowledge of Smart plant review tool.
- Participating to detail engineering phase in particular to construction related issues.
- Ensure and assist the interfaces with the construction site Management, quality and commissioning team.
- Reverts to the engineering team when needed for securing the technical answer.
- Supervises the engineering document, studying the scope of work and familiar with 3D review technique.
- Reviewing specification, method statement and standards of materials (pipes, fitting, flanges, gaskets etc)
- Proficient in reading P & ID, Flow sheet, General arrangement, Support and isometric drawing.
- Preparing isometric drawing from general arrangement with the estimation of MTO.
- Consulting with client personal for any field related queries in drawings.
- Supervise the disciplinary team/contractors during the execution of construction activities at site.
- Ensure the contractors compliance the work in accordance with establish procedure, contract specification, international standards and safety.
- Monitoring construction & fabrication activities such as fit up, welding, painting of spools, erection of spools, trenching of pipeline, sand pre padding, bending of pipe, holyday testing and peel testing for coated pipes
- Liaising with other disciplines/group such as design and quality to ensure project requirements are met.
- Maintain a daily record of progress (daily diary) noting special comments. Report to senior any work anomalies or contractual deviations committed by contractor and recommends appropriate corrective action.
- Familiar with international cods & standards (ASME B31.1, B31.3, B31.8, API 1104 and ASME section IX.) for process piping.
- Handling of IPMS (Integrated Project Management System ) 
- Broad knowledge of Piping Fabrication, Erection & Pipe Support Installation.
- Assigning in Pre-Commissioning & Commissioning activity.
- Supervision of Maintenance Work (Shut Down).
CAREER SUMMARY
[b]ASSIGNMENT # 13  [/b]: Apr 2011 to till 
[b]Position Held  [/b]: Field Piping Engineer 
[b]Organization  [/b]: Saipem Spa. 
 (A leading EPC Contracting Company)
[b]Client  [/b]: Qatar Fertiliser Company (S.A.Q.), Qafco 6, Qatar
[b]Work profile [/b]:
- Resolving the Technical Queries. 
- Co-ordination of Test Pack.
- Preparation of complete test packages (hydro, Pneumatic, visual) including checklist and applicable reports as per commissioning marked-up P & ID.
- Consulting with client personal for any field related queries in drawing.
- Preparing isometric drawing from general arrangement with the estimation of MTO.
- Field Revision Instruction (FRI), dimension change, routing changes. 
- Ensuring strict compliance with the project requirement during construction.
- Co-ordination with Contractor‘s field Engineers about drawing discrepancies.
- Provide input for the management for deviation or non compliance for QC.
[b]ASSIGNMENT # 12  [/b]: Feb 2010 to 28 Feb 2011
[b]Position Held  [/b]: Field Piping Engineer 
[b]Organization  [/b]: Bonatti Spa 
[b]Client  [/b]: Agip KCO, Kazakhstan North Caspian
[b]Work profile [/b]:
- Resolving the Technical Queries & Consulting with client personal for any field related queries in drawing.
- Preparation of technical queries for the discrepancy between P&ID, isometric drawing and line data sheet.
- Co-ordination of Test Pack. 
- To ensure the construction works carried out to the required project specification, drawing and compliance to the specific ITP/QC. 
- Preparing isometric drawing from general arrangement with the estimation of MTO.
- Joint inspection with client for pressure test release, pressure test and reinstatement of piping system.
- Responsible for ensuring that the project quality plan is strictly implemented on site during fabrication.
- Provide support to Project management on construction, QA/QC matter.
- Co-ordination with Contractor‘s field Engineers about drawing discrepancies.
[b]ASSIGNMENT # 11  [/b]: Jun 2009 to 31 Dec 2009
[b]Position Held  [/b]: Field Piping Engineer 
[b]Organization  [/b]: Snamprogetti Spa Eni (A Company of Saipem)
 (A leading EPC Contracting Company)
 Samir Upgrade Project, Morocco
[b]Client  [/b]: SAMIR
[b]Work profile [/b]:
- Resolving the Technical Queries and Co-ordination of Test Pack. 
- Knowledge of Smart plant review tool. 
- Ensuring strict compliance with the project requirement during construction.
- Responsible for ensuring that the project quality plan is strictly implemented on site during fabrication.
- Provide support to Project management on construction, QA/QC matter.
- Co-ordination with Contractor‘s field Engineers about drawing discrepancies.
[b]ASSIGNMENT # 10  [/b]: February 2007 to July 2008
[b]Position Held  [/b]: Field Piping Engineer 
[b]Organization  [/b]: Snamprogetti Spa Eni (A Company of Saipem)
 (A leading EPC Contracting Company)
 Ruwais 3NGL, UAE
[b]Client  [/b]: GASCO
[b]Work profile [/b]:
- Resolving the Technical Queries and Co-ordination of Test Pack. 
- Knowledge of Smart plant review tool.
 
- Ensuring strict compliance with the project requirement during construction.
- Responsible for ensuring that the project quality plan is strictly implemented on site during fabrication.
- Provide support to Project management on construction, QA/QC matter.
- Co-ordination with Contractor‘s field Engineers about drawing discrepancies.
- Provide input for the management for deviation or non compliance for QC, Safety and Environmental issue.
- Inspection of fabrication.
[b]ASSIGNMENT # 9  [/b]: April 2006 to November 2006
[b]Position Held  [/b]: Field Piping Engineer 
[b]Organization  [/b]: Cakra Catur Nikki Construction - Joint Venture 
 (A leading EPC Contracting Company)
 For Tangguh LNG Project, Indonesia.
[b]Client  [/b]: BP Berau Ltd.
Work profile:
- Marking of shop weld and field weld on the hard copy of IDF drawings and sending it to all spoolgen operators for marking the same in Spoolgen Software.
- Making the guidelines for marking of shop weld and field weld for generating the spoolgen drawings and erection isometric drawings on the Spoolgen Software. 
- Marking of shop weld and field joints on the IDF files in Spoolgen software and generating the spool drawings and erection isometric drawings.
- Checking of all spoolgen drawings and erection isometric drawings before sending it for final transmittal to the client.
- Co-ordination with field engineers about drawing discrepancies.
- Preparation of J.C.R. & F.S. as per requirement of field and fab shop.
- Inspection of fabrication.
ASSIGNMENT # 8 : April 2005 to September 2005
Position Held : Field Piping Engineer 
Organization : Dodsal Pte. Ltd. 
Client : Dolphin Onshore Gas Compression
 
Work profile:
- Responsible for piping shop fabrication.
- Studying the scope of work from the general arrangement drawing, P & ID and isometric drawing. 
- Reviewing specification, method statement and standards of materials
- Provide technical supports to sub contractor in interpretation of drawing and Iso.
- Reviewing piping test packages and punching for finished work prior to testing.
- Responsible to make daily progress report and submit to construction manager.
- Ensuring strict compliance with the project requirement during construction.
- Responsible for ensuring that the project quality plan is strictly implemented on site during fabrication.
- Provide support to Project management on construction, QA/QC matter.
- Co-ordination with Contractor‘s field Engineers about drawing discrepancies.
- Inspection of fabrication.
ASSIGNMENT # 7 : May 2003 to October 2004
Position Held : Piping Engineer 
Organization : Dodsal Pte. Ltd.
 ELNG (SEGAS), Egypt.
Main Contractor : JGC-KBR – Joint Venture
Work profile:
- In-charge of Fabrication Shop (LTCS & CS Big bore).
- Preparation of work schedule, tools & tackles requirement, project material and consumable requirement, equipment and manpower requirement 
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts. 
- Checking and reviewing of MS and ITP/QCP’S
- Consulting with client personal for any field related queries in drawing.
- Preparing isometric drawing from general arrangement with the estimation of MTO.
- Preparation of technical queries for the discrepancy between P&ID, isometric drawing and line data sheet.
- To ensure the construction works carried out to the required project specification, drawing and compliance to the specific ITP/QC.
- Planning of Daily activities/project materials and technical requirement.
- Verification of compliance to applicable drawing, codes and specification.
ASSIGNMENT # 6 : March 2001 to November 2002
Position Held : Piping Engineer
Organization : Dotanah Engg. & Cont. SDM
 MLNG Tiga Plant Project, Malaysia. 
Main Contractor : JMSB-KMSB-SIME JGC-KBR, JV.
Work profile:
- In-charge of Fabrication Shop (SS Fab shop).
- Preparation of work schedule, tools & tackles requirement, project material and consumable requirement, equipment and manpower requirement
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts.
- Implementation of safety at site and conducting the tool box meeting daily.
- Co-ordination with QA/QC for fit-up/weld visual inspection and NDT (DPT, MPT, UT & RT).
- Planning of Daily activities/project materials and technical requirement.
- Interfacing and co-coordinating with project, closing NCR after corrective action. 
ASSIGNMENT # 5 : May 1999 to August 1999
Position Held : Piping Supervisor
Organization : Mannesmann Demag AG.
 ASAB Gas Site, UAE 
Client : GASCO
Work profile:
- Supervision and control of contractor’s caring out the piping fabrication and erection. 
- Solving the interface trouble suiting at site and making the piping isometric as built & co- ordination with other department.
- Preparation of work schedule, tools & tackles requirement, project material and consumable requirement, equipment and manpower requirement 
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts. 
- Total control on fabrication & Erection.
- Co-ordination with QA/QC for fit-up/weld visual inspection and NDT (DPT, MPT, UT & RT).
- Planning of Daily activities /project materials and technical requirement.
- Inspection and executing the mechanical clearance of pipe lines.
ASSIGNMENT # 4 : June 1996 to March 1999
Position Held : Site Engineer
Organization : Dolphin Offshore Enterprises
 Bombay High (ONGC All Platform), India. 
Client : ONGC, India 
Work profile:
- Fabrication & Erection of Piping.
- Preparation of work schedule, tools & tackles, project material and consumable requirement, equipment and manpower requirement 
- Execution of job as per approved procedure & plan 
- Fully conversant with drawings, P&ID’S, GAD’S & Isometrics
- Able to make as built change as per site condition with the help of field design persons.
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts. 
- Total control on fabrication & Erection.
- Planning of Daily activities/project materials and technical requirement.
- Inspection and executing the mechanical clearance of pipe lines.
ASSIGNMENT # 3 : July 1995 to May 1996
Position Held : Site Engineer
Organization : Onshore construction com Ltd.
Main Contractor Shri Ram Consultancy, Delhi
Client : Hindustan Organic Chemical Ltd.
Work profile:
- Fabrication & Erection of Piping.
- Preparation of work schedule, tools & tackles, project material and consumable requirement, equipment and manpower requirement 
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts. 
- Planning of Daily activities /project materials and technical requirement.
- Inspection and executing the mechanical clearance of pipe lines.
- Co-ordination with QA/QC for fit-up/weld visual inspection and NDT (DPT, MPT, UT & RT).
ASSIGNMENT # 2 : September 1993 to July 1995
Position Held : Site Engineer
Organization : Offshore Welder & Fabricator Pvt. Ltd.
Main Contractor : Uday India Ltd., Bombay,
 Supreme Petro Chemical Ltd.,
 Nagothana (India).
Work profile: 
 
- Fabrication & Erection of Piping.
- Preparation of work schedule, tools & tackles, project material and consumable requirement, equipment and manpower requirement 
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts. 
- Total control on fabrication & Erection.
- Planning of Daily activities /project materials and technical requirement.
- Co-ordination with QA/QC for fit-up/weld visual inspection and NDT (DPT, MPT, UT & RT).
ASSIGNMENT # 1 : March 1993 to August 1993
Position Held : Junior Engineer 
Organization : Offshore Welder & Fabricator Pvt. Ltd.
Main Contractor : Uday India Ltd., Bombay,
 Supreme Petro Chemical Ltd.,
 Nagothana (India).
Work profile: 
- Preparation of work schedule, tools & tackles requirement, project material and consumable requirement, equipment and manpower requirement 
- Responsible for piping construction activities. 
- Responsible for installation of the pipe.
- Responsible for execution of job as per approved procedure, schedule and plan 
- Involvement in engineering reviews with co-ordination of field input.
- Fully conversant with all safe permit systems
- Planning for daily activities & Progress target. 
- Deployment of manpower and monitoring the efforts. 
- Planning of Daily activities /project materials and technical requirement
- Co-ordination with QA/QC for fit-up/weld visual inspection and NDT (DPT, MPT, UT & RT).[/QUOTE]

All times are GMT +5.5. The time now is 12:35 PM.