Ask Question / Post resume

Post a reply to the thread: Infospace Technologies India Saudi Arabia : PDS PIPING DESIGN ENGINEER, INTools

Your Message

Your Username:

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest;149959]RESUME
 IMRAN ASLAM JAWRE [Piping/Mechanical Eng.(PDS DESIGNER)] 
 
 [b]E-mail ID  [/b]: imran_iaj6982 AT yahoo.co.in 
 
 CAREER OBJECTIVE
 
TO WORK IN A COMPETETIVE &CHALLENGING ENVIROMENT, TO CONTRIBUTE WITH THE BEST OF MY ABILITY TOWARDS THE GROWTH OF AN ORGANISATION.
 
 
 T E C H N I C A L E X P E R I E N C E
 I am a qualified Diploma in Mechanical Engineer with seven years of experience with the various types of oil, gas & petrochemical projects in India & Middle East. I have also done Advanced Diploma in Piping Engineering.
 TOTAL 4yrs EXPERIENCE AS A “PDS DESIGNER”.
- TOTAL 3yrs EXPERIENCE AS A “PIPING DESIGNER”.
 E D U C A T I O N A L Q U A L I F I C A T I O N
 
 
 [b]PASSED  [/b]: [SSC] FROM MUMBAI BOARD WITH FIRST CLASS.
 [b]SCHOOL  [/b]: “LOURDES HIGH SCHOOL” [KALYAN {W}]
 [b]PASSED  [/b]: “DIPLOMA IN MECHANICAL ENGINEERING” WITH SECOND CLASS.
 [b]COLLEGE  [/b]: “SHIVAJIRAO JONDHALE POLYTECHNIC” [AMBERNATH {E}]
 [b]PASSED  [/b]: COMPUTER AIDED DRAFTING [“AUTOCAD”] ALL THREE MODULES 
 [2D, 3D] WITH [“A”] GRADE. 
 [b]INSTITUTE  [/b]: “INDUSTRIAL TRANING INSTITUTE” [ITI AMBERNATH {W}]
 P R O F E S S I O N A L Q U A L I F I C A T I O N
 
 
 [b]PASSED  [/b]: “ADVANCED DIPLOMA IN PIPING ENGINEERING”
 [b]INSTITUTE  [/b]: “SUVIDYA INSTITUTE OF TECHNOLOGY” [SANTACRUZ {E}] 
 S O F T W A R E K N O W L E D G E 
 [b]SOFTWARE SKILLS  [/b]: PLANT DESIGN SYSTEM [ PDS ].
 SMART PLANT REVIEW [SPR], MICROSTATION,
 [ AUTOCAD 2004, 2005, 2006 & 2007 ].
 
 W O R K E X P E R I E N C E
[b]1) Organization  [/b]: “GOLLA ENGINEERING PRIVATE LIMITED”¬¬¬¬¬¬¬¬¬–[CBD-BELAPUR].
 
 [b]Designation  [/b]: Working as a “PDS DESIGNER”
 
 [b]Owner  [/b]: INDIAN OIL CORPORATION LTD.VADODARA – [GUJARAT] 
 [b]Project  [/b]: RESIDUE UPGRADATION & MS/HSD QUALITY IMPROVEMENT 
 PROJECT.EPCC -4 ISOM & NSU UNIT.[PENEX UNIT]
 [b]Pmc  [/b]: TOYO ENGINEERING INDIA LTD.MUMBAI-INDIA.
 [b]Date  [/b]: 03/03/2008 TO TILL DATE .
 [b]Responsibilities  [/b]: 1) TENTATIVE LINE ROUTING AS PER PFD [MANUALLY]
 2) BULK MTO TAKE OFF AS PER P&ID.[MANUALLY].
 3) LINE ROUTING IN GAD AS PER P&ID.
 4) EQUIPMENT MODELLING AS PER VENDOR DRAWING USING PDS 
 SOFTWARE.(7.1VERSION).
 5) LINE ROUTING AS PER GAD & P&ID , PIPING MODELLING
 USING PDS SOFTWARE .(7.1VERSION)
 6) ISOMETRICS EXTRACTION & ISO ERROR RESOLVING.
 7) SUPPORT CODING AS PER TECHNIP SUPPORT STANDARD.
 8) ISOMETRICS EXTRACTION USING PDS SOFTWARE.
 9) EQUIPMENT CHECKING AS PER VENDOR DRAWING (P&ID,GAD).
 10) ISOMETRICS CHECKING AS PER GAD & P&ID.
 11) SECONDARY SUPPORT MODELLING USING PDS SOFTWARE.
 12) PIPING AND EQUIPMENT CLASH CHECKING USING SMART PLANT 
 REVIEW SOFTWARE.
[b]2) Organization  [/b]: “GOLLA ENGINEERING PRIVATE LIMITED”
 [b]Owner  [/b]: HINDUSTAN PETROLEUM CORPORATION LIMITED [MUMBAI REFINERY].
 [b]Project  [/b]: FRE – REVAMP [GREEN FUEL EMISSION CONTROL PROJECT]
 [FRE-APS/VPS REVAMP] – [UNIT – 31/32].
 [b]Responsibilities  [/b]: 1) AS BUILT MARK UP FROM SITE UPDATION IN GADS.
 2) LINE ROUTING IN GAD AS PER NEW P&ID.
 3) ISOMETRICS MAKING ,CHECKING & MTO UPDATION AS PER P&ID.
 4) SUPPORT CODING AS PER EIL STANDARD.
 5) SPECIAL SUPPORT DESIGNING AS PER REQUIREMENT.
 6) VESSEL CLIP DESIGNING.
 7) APS STACK AS BUILT DRAWING MAKING.
 8) DUCTING FABRICATION DRAWING CHECKING.
 9) MODIFICATION OF EXISTING DUCT AS PER REQUIREMENT.
 
[b]3) Organization  [/b]: “GOLLA ENGINEERING PRIVATE LIMITED”–[Belapur]
 
 [b]Designation  [/b]: Worked as a “PDS DESIGNER” 
 
 [b]Project  [/b]: [ HINDUSTAN PETROLEUM CORPORATION LIMITED][VISAKH REFINERY.]
 [ HIGEE SYSTEM IN FG AMINE ABSORPTION UNIT. ] 
 
 [b]Responsibilities  [/b]: 1) EQUIPMENT & PIPING MODELLING IN PDS.
 2) PIPING MODELLING AS PER GAD IN PDS.
 3) ISOMETRICS EXTRACTION & ISO ERROR RESOLVING.
4) Organization : “GOLLA ENGINEERING PRIVATE LIMITED”–[Belapur]
 
 Project : [ ISRL-SBR PLANT. ] 
 
 Responsibilities : BULK MATERIAL TAKE OFF AS PER P&ID.
 
5) Organization : “GOLLA ENGINEERING PRIVATE LIMITED”–[Belapur]
 
 Designation : Worked as a “PDS DESIGNER” 
 Project : [FRE – REVAMP [GREEN FUEL EMISSION CONTROL PROJECT]]
 [FRE-APS/VPS REVAMP] – [UNIT – 31/32].
 Responsibilities : 1) EQUIPMENT & PIPING MODELLING IN PDS.
 2) PIPING MODELLING AS PER GAD IN PDS.
 3) ISOMETRICS EXTRACTION & ISO ERROR RESOLVING.
6) Organization : “GOLLA ENGINEERING PRIVATE LIMITED”–[Belapur]
 Owner : NATIONAL IRANIAN OIL REFINING& DISTRIBUTION CO. 
 LAVAN OIL REFINING COMPANY. 
 Pmc : BINA CONSULTING GROUP.
 Designation : Worked as a “PDS DESIGNER” 
 Project : LAVAN REFINERY UPGRADING & REVAMPING CONSTRUCTION OF 
 LICENSED UNITS (EPC).
 
 Responsibilities : 1)PIPING MODELLING AS PER GAD USING PDS SOFTWARE.
 2) SUPPORT MARKING OF ALL COMPRESSOR LINES.
 3) HAVE INDEPENDENTLY DESIGNED & CHECKED ALL 
 COMPRESSORS SUPPORT DRAWINGS.
 
7) Organization : “GOLLA ENGINEERING PRIVATE LIMITED”–[Belapur]
 
 Owner : STEEL AUTHORITY OF INDIA LTD [ BOKARO STEEL PLANT ].
 
 Project : INTER PLANT AND IN SHOP PIPE LINES FOR CRM-III (PKG-099 ). 
 
 Designation : Worked as a “PDS DESIGNER” 
 
 Responsibilities : 1) PIPING MODELLING OF STEAM LINES USING PDS SOFTWARE.
 2) ISOMETRICS EXTRACTION AND ISO ERROR RESOLVING.
 3) ISOMETRICS CHECKING AS PER GAD.
8) Organization : “SHARP LINE ENGINEERING SERVICES” – [VIKROLI(W) (Branch)].
 
 Designation : Worked as a “PIPING / PDS DESIGNER” 
 From 10-10-2006 to 02-02-2008 .
 
 Responsibilities : 1) ISOMETRICS DRAWING WITH BILL OF MATERIAL.
 2) ISOMETRICS CHECKING WITH AS PER GAD,P&ID AND PMS.
 3) DESIGNING OF SPECIAL SUPPORT AS PER REQUIREMENT.
 4) BULK MATERIAL TAKE OFF AS PER P&ID.
 5) VESSEL CLIPS DESIGNING FOR ALL COLUMNS.
 6) LINE ROUTING IN GAD , PIPING STUDY.
 7) EQUIPMENT MODELING IN PDS
 8) LINE ROUTING AS PER GAD & P&ID , PIPING MODELLING
 USING PDS SOFTWARE.(7.1VERSION).
 9) ISOMETRICS EXTRACTION USING PDS SOFTWARE.
 10) ISOMETRICS EXTRACTION & ISO ERROR RESOLVING.
 
9) Organization : “SNC-LAVALIN INDIA PRIVATE LIMITED”–[Sakinaka]
 On subcontract with “SHARP LINE ENGINEERING SERVICES”. 
 Designation : Worked as a “PIPING DESIGNER” 
 From 15-11-2005 to 02-10-2006 .
 Project : “CONSITO”.
 Responsibilities : 1) ISOMETRICS DRAWING WITH BILL OF MATERIAL. 
 2) ISOMETRICS CHECKING AS PER P&ID .
 3) DETAIL DRAWING OF PUMP SUCTION & DISCHARGE LINES .
 4) PUMP LOCATION AS PER CLIENT REQUIREMENT.
 5) GAD LINE ELEVATION CHECKING .
 6) LINE ROUTING ON GAD AS PER P&ID .
 7) SUPPORTING OF PUMP SUCTION & DISCHARGE LINES.
10) Organization : “SHARP LINE ENGINEERING SERVICES” – [VIKROLI(W) (Branch)]. Designation : Worked as a “PIPING DESIGNER” 
 From 10-09-2004 to 30-10-2005.
 Project : “SHELL” [SINGAPORE]
 “DEEPAK FERTILIZERS” [NAVI MUMBAI, INDIA]
 “NUMALIGARH REFINERY” [GOLAGHAT DISTRICT ASSAM, INDIA].
Responsibilities : 1) ISOMETRICS DRAWING WITH BILL OF MATERIAL.
 2) ISOMETRICS CHECKING AS PER P&ID .
11) Organization : “SHARP LINE ENGINEERING SERVICES” – [Dombivli] .
 
 Designation : Worked as a “PIPING DESIGNER / DRAUGHTSMAN” trainee. 
 From 10-02-2004 to 03-09-2004. 
 Responsibilities : 1) EQUIPMENT MODELLING USING AUTOCAD.
 2) ISOMETRICS DRAWING AS PER GAD USING AUTOCAD.
 
 COLLEGE PROJECT : HAVE PERSONALLY CONTRIBUTED IN MANUFACTURING [T.Y M.E] 
 FINAL YEAR PROJECT. 
 
 Project : “TILES POLISHING MACHINE AUTOMOBILE”
 EXTRA CURRICULAR ACTIVITIES :
 READING BOOKS, LISTENING MUSIC.
 EDUCATIONAL HIGHLIGHTS :
 PASSED [SSC] FROM MUMBAI BOARD WITH FIRST CLASS.
 PASSED DIPLOMA IN MECHANICAL ENGINEERING WITH SECOND CLASS.
 PASSED COMPUTER AIDED DRAFTING [AUTOCAD ALL THREE MODULES [2D, 3D]WITH [“A”] GRADE.
 PASSED “ADVANCED DIPLOMA IN PIPING ENGINEERING”[/QUOTE]

All times are GMT +5.5. The time now is 10:40 AM.