Ask Question / Post resume

Post a reply to the thread: Electrical Design Engineer Saudi Arabia KSA : Aramco experience, EPC

Your Message

Your Username:

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest;134294]I would like to work in tough conditions. You will find me very hard worker and that’s why I want to say you one thing "experience does not mean how many years I worked, it means” how much I worked by the grace of God".
ASAD ALI
[b]E-Mail [/b]: asad_engineer2000 AT yahoo.com 
[b]OBJECTIVE [/b]: Prove myself as a valuable resource for the organization, and with my knowledge give something new to my organization.
[b]PROJECTS [/b]:
SUPERVISE PROJECTS
1-Basement+Ground+First Floor Villa complete Electrical circuit, Cable Calculations and Switch Board Designing. 
2-New power connection termination of 300mm2 AL\XLPE\SWA\PVC cable works in sheds.
3-Load schedule designing of china restaurant in Ajman city UAE.
4-Extension in Existing Mosque 670Kw load Complete Electrical designing.(MDB,SMDB,DB,C.BANK,EARTING).
5-Modification of Main Distribution Board in international Indian School Ajman UAE.
6-Modification of Ground floor existing flats in G+3 building into shops.
7-Working on LPG plant control and Scada based panel designing using PLC Mitsubishi (Fx series).
8-Complete rewiring and electrical Room designing including (Main distribution boards, Sub main distribution boards, final distribution boards, capacitor banks, Earthling works)for a burned Shed.
9-Load Calculation in G+4 Building and Submission of file for additional power connection in Federal Water and Electricity Department UAE.
10-Load Calculation of G+3 building and Prepare load Cards for submission of file in FEWA.
11- Load Calculation of 19 Sheds Prepare load Cards for submission of file in FEWA.
12- Load Calculation of G+4 building and Prepare load Cards for submission of file in FEWA
13-Security based system hotel, banks, smart home Using Microcontroller.
14-Design low power transformer and monitoring parameters on personal
Computer and protection of load connected with transformer.
15-Design low power transformer designing software.
16-Design distribution transformer designing software.
17-Design Power flow analysis software (Gauss Sidel, Newton Raphson).
18-Design Trafic Control System.
19-Design a Analog-Digital module and interface with LCD.
EXPERIENCE
1-Arab Tower Electromechanical Contractor L.L.C Ajman, U.A.E (Still working)
Building Design and Estimation Electrical Engineer
Electrical Engineer / Designer with excellent experience in designing load schedules, Main power distribution boards, sub main distribution boards, final distribution boards, capacitor bank designing, cable sizing conduits selection and designing on AutoCAD, Estimation Electrical work for construction such as villas, buildings directly dealing with client and consultant,.. I am also supervising building plumbing works (water line and drainage pipe line designing and supervising). I have an excellent experience of working with multi culture people in UAE.
Electrical Engineer
UWALABS (PVT) Lahore, Pakistan
I worked in Uwa lab in R& D department my duty was there to work on microcontrollers
And develop the new products for automation e.g. access control points designing circuits.
3-Electrical Engineering Internship,
Hybrid techniques (PVT) Lahore, Pakistan
I worked in hybrid electronics lab and my duty was to know different electronic components and various electronics circuits and how to sold the electronics components on PCB. I made different timer circuits there by using programming language with microcontroller.
4-Electrical Engineering Internship,
Transformer Design and Testing Department PAK-ELEKTRON LTD. Lahore
I worked in (Distribution transformer) designing, testing department and come to know Short circuit tests, resistance test, turns ratio test, High Voltage test, no load test, inter turn test, worked in transformer assembly department I was member of quality control inspection team of Transformer. I also worked in current transformer and potential transformer production Department.
3-Electrical Engineering Internship,
Appliances Department PAK-ELEKTRON LTD. Lahore
I worked in maintaining department I came to know different types of motor faults motor
Starting problems, method use to control the motor speed, we had a weekly or daily maintaining
Schedule for injection molding machines.
4-Electrical Engineering Internship,
Switch Gear Department, PAK-ELEKTRON LTD. Lahore
I got very nice experience to worked in production department in H.T and familiar with different types of H.T control panels incoming panels, outgoing panels, bus coupler panels, consumer panels, industrial panels, owner type panels, capacitor control panels, transformer protection panels and came to know different types of components and their functions in panels. And also different types of L.T products Incoming, outgoing, sub-main panels boards, Aux-control panels, Out Door control panels, relay panels, switch board, PFI, Bus coupler, Pad mounted Transformer Meter security Box I worked in power project design department and know how to take a project from different tender offering companies.
5-Electrical Engineering Internship,
Switch Gear Design Department, Multi-Tech LTD. Lahore
I worked in switch gear L.V design department Also learn how to create B.O.Q and deal with
Consultant.
CERTIFICATION
1-Diploma in java programming NK fect College Lahore.
2-Diploma in AutoCAD electrical PITAC College Lahore.
Navigate the AutoCAD user interface
Design methodologies.
Design relay logic & single line diagram
Design Schematics (Power and Control)
Create Block diagram, Terminal Schedules
Point-to-point wiring diagram.
Automatic device tagging and numbering.
Create custom symbols.
Drawing reading & modification.
Understand IEC, IEEE, BS, ANSI Standards and codes.
Create and evaluate Bill of material.
Calculation of cable and copper size.
Understanding to protection relays, Metering instruments, switching equipments.
Understanding to Switchgear Panels / Boards.
3-Diploma in Project Management College, Lahore Pakistan.
4-Diploma in PLC from staff training institute Gulburg, Lahore Pakistan.
5-Diploma in Embedded System designing from school of engineering.
Gulburg Lahore, Pakistan.
Input devices like Sensors, Transducers, keypad etc.
Output Devices like LED Patterns, LCDs, 7-Segments, Monitor, etc.
Remote Controlling and Data Logging System Using GSM Modems.
Coordinates, direction and Speed Acquisition using GPS receiver to design Tracking and Security systems.
Robotic controls using RF Modules.
Data transfer protocols and data Encryption / Decryption.
Serial Communication using RS232, RS485, Protocols.
Configuration of serial and Parallel ADC and DAC Modules.
Inter facing with RTC to develop Time dependent events controls.
PWM based controlling of Stepper and Servo Motors.
[b]EDUCATION [/b]:
Bachelor of Science in Electrical Engineering
University of South Asia Lahore
Specialization in Power 79% marks
[b]COMPUTER SKILLS [/b]:
Auto cad 2010
MS Office 2007
Primavera
Java
E-Tap
PLC
Keil
Protious
Lab view
Matlab
C
Study tours during my university times
1-Study Tour in PAK-ELEKTRON LTD, Lahore, Pakistan.
Distribution Transformer design and erection department unit-2
2-Study Tour to new Multan international airport Pakistan.
Air field lighting project (imperial Electric company Lahore)
I have a fantastic experienced working with site engineers and came to know how to deal with client and consultant. I have a great experienced of working in very tough atmosphere learned about air field lighting (approach lights, threshold lights, center line, edges, papi, and circuit scheme for lighting)
3- Study Tour to 132kv Grid station Lahore
[b]About Me [/b]: I feel something wrong with me when I have nothing to do in my office I love to keep myself busy in my work I got this power engineering field in my blood from my native and love to work because I think there is no boundary for knowledge and want to explore new experience.[/QUOTE]

All times are GMT +5.5. The time now is 03:47 AM.