Ask Question / Post resume

Post a reply to the thread: Mechanical Engineer with Subsea Experience : Houston, TX

Your Message

Your Username:

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest-IJT;103051]CURRICULAM VITAE

SUBIR DAS
H.NO. 25,VIRAT NAGAR
MODEL TOWN , PANIPAT. MOB. 09991979893
HARYANA. Ph.no.03561220135
---------------------------------------------------------------------------------------------------------------------
TOTAL EXPERIENCE : 8.5 years in Oil & gas construction field.

PRESENT SITUATION:
Working as a Project Engineer [Mechanical] in NAPTHA CRAKER PROJECT under INDIAN OIL CORPORATION LTD in Panipat , Haryana with INDIAN OILTANKING LTD in Off-site & Storage Facilities (EPCC-8) from July2007.

RESPONSIBILITY:
- Execute Steel Structural Fabrication and Erection of Offsite Pipe Rack (appx. 22000 MT), Compressor House Gantry (60mts x 20 mts), Loading /Unloading Gantry.
- Surface preparation of material as per Swedish Standard (SA 2.5) & Primer application as per technical specification.
- Documentation related to Fit-up, Dimensional accuracy, Weld visual, Shot blasting & primer application ,Verticality of Columns , Field Welding & Painting Clearance.
- Checking measurement of Running Bills, Final Bills & Reconciliation of materials.
- Engineering support to ensure compliance with job specification.
- Co-ordinate with all disciplines of work and lease with site engineer as assigned for day to day activities.
- Verify and ensure all activities in the assigned area to compliance with technical specification, drawing & QA/QC procedure.
- Erection and alignment of Equipments like LP Air receiver, Pumps etc.
- Co-ordination with contractors, consultant & client.
- Execute all activities related to commissioning to offsite piping system like water flushing, air drying, leak test etc.
- Liquidate all punch point related to utility & process piping system proposed by client & contractor through Format I to Format IV.
- Identification of System-subsystems and chart encompassing all the relevant detail in consultation with Engineering Manager and prepare Project Commissioning Plan.
- Coordinate Commissioning Procedure preparation in consultation with Engineering Manager.
- Coordinate Commissioning Meetings with Client.
- Coordinate with all other EPCC during flashing & air drying in PNC project complex(OSBL & ISBL).
- Complete of job within completion period with proper safety.

WORK EXPERIENCE:
1.Worked as a Project Engineer [Mechanical] with INDIAN OILTANKING LTD at Baitalpur IOCL Depot. [UP] from Fab2007 to June 2007.
Key responsibilities were
- Execute FRV Tank erection ,including liquidate of punch point from client.
- Blasting and Painting , Documentation related to verticality of shell , vacuum test of bottom plate , puncher & rain water test of deck, hydro fill test of tank, pneumatic test of all pad plate etc.
- Structural Fabrication and Erection related to tank & tankfarm area.
- Final box up & commissioning of tank.

2. Worked as a Site Engineer (MEAHANICAL) in BAHADURGARH TERMINAL [Haryana] under Mundra-Delhi Pipeline Projects with KNY Projects Pvt Ltd ( A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co Ltd (A GOVT of India Undertaken Co.)from Sep 2006 to Feb 2007.
Key responsibilities were
- Execute Steel Structural Fabrication and Erection of Product Pump House , Tank Truck Filling Gantry, Tank Wagon Loading Gantry (960 mts long).
- Surface preparation of materials as per Swedish Standard (SA 2.5) and Primer application as per technical specification .
- Completion of the job as per scope, Measurement & certify the extra activities.
- Checking of RA Bills, Final Bills & reconciliation of materials.
- Documentation related to QA/QC.
- Clarify all problems in drawings & site position.
- Proper job planning to complete the job within completion period.
- Co-operation with Contractors & Client.

3. Worked as a site engineer(Mechanical) in MUNDRA-DELHI PIPELINE PROJECTS [HPCL] and CRUDE OIL STORAGE SYSTEM [IOCL] at Mundra [Gujarat] with KNY PROJECTS PVT LTD (A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co. Ltd (A GOVT of India Undertaken Co.)from Dec 2005 to Sep 2006.
Key responsibilities were
- Steel Structural Fabrication and Erection , Shot Blasting and Painting of Bust up pump house ,Fire Water Pump House ,Grease Drum Shade, Product Pump House etc.
- Documentation related to Fit-up, Dimensional accuracy, Weld visual, Shot blasting & primer application ,Verticality of Columns , Field Welding & Painting Clearance.
- Execute all activities related to CS piping system.
- Making Isometric drawing from GA.
- Preparing measurement sheet & reconciliation of materials.
- Checking of RA & final bill.
- Coordinate with Contractor , Consultant & Client.

4. Worked as a Site Engineer with KAIZER CONSTRUCTION CO.LTD from Jan 2004 to Sep 2005.
Key responsibilities were
- Steel Structural Fabrication and Erection , Shot Blasting and Painting of Industrial Shade (65X40 mts).
- Documentation related to structural work.
- Reconciliation of materials.
- Documentation related to QA/QC

5. Worked as a Production Executive in THE STATESMAN LTD (A National Daily) From Sep’2001 to Dec’2003,Siliguri.
Key responsibilities were
- Preventive maintenance of high speed rotary off-set machines, high pressure compressors [up to 18 kgf], DG set [up to 100 KVA] .
- Weekly Production Planning and Documentation .

EXTRA ACTIVITIES:

1. Execution of Piling work in DMC Process (Dia-450mm , Depth-14 mts.) was a major activity in MUNDRA TERMINAL PROJECT, Gujarat.

2. Working experience on one month Shut – Down Project in RFCC Unit (Panipat Refinery) as a commissioning Engineer.

EDUCATIONAL QUALIFICATION:
1. Passed Madhyamik Examination from West Bengal Board Of Secondary Education with 69.33% [1st Division] on 1996.
2. Passed Diploma in Mechanical Engineering from West Bengal Board Of Technical Education with 72.4% [1st Division] on 2001.

KNOWLEDGE IN COMPUTER: MS Word , Excel , Internet.

INDUSTRIAL TRAINING:
1. Training on IN-PLANT TRAINING from N.S.I.C (GOVT Of India).including Tensile Testing in Universal Testing Machine, Hardness testing in Rockwell & Brinel Hardness Testing Machine, Heat Treatment of Ferrous Materials,& chemical analysis , many types of machining operations in Milling, lathe, Universal Boring, shaping m/c etc.
2. Training on Babcock and Wilcox Boiler from Jalpaiguri Govt. Polytechnic Institution.

ADDRESS: C/O S.C Das ; South Ashok Nagar ; PO&DIST-Jalpaiguri ;
West Bengal;
PIN-735101.
Ph.No. 03561-220135[R]

DATE OF BIRTH: 9th July 1979.

PRESENT SALARY: 4.5 Per Annul.

EXPECTED SALARY: Negotiable.

E-MAIL: subir_das79 AT rediffmail.com

PERSONALITY: I am a result focused man , who believes in my own strength , skills and roles while remaining flexible. Hard work and sincerity is inborn traits. I have good teamwork skills and find myself fit for team based organization.

SUBIR DAS.
PANIPAT.[/QUOTE]

All times are GMT +5.5. The time now is 09:13 PM.